ap3125aktr-g1

@@ -0,0 +1,216 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AP3125AKTR-G1",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 6,+      "span_mm": 3.6,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 6,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.288,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -1.4,+      1.4,+      -1.2,+      1.2+    ],+    "pads_bbox_mm": [+      -1.8,+      1.8,+      -1.25,+      1.25+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "ap3125aktr-g1-etched.glb",+    "glb_sha256": "4a740670f128c430347fb8aee20a3f48f409f567f18bfe48b9e94b1be3e24054",+    "footprint": "ap3125aktr-g1.kicad_mod",+    "footprint_sha256": "f341c73aac9dcb553456f68bf3fee3d26eb14acf6d8a1cae82b50418fe1d71ca",+    "pins": "page.json component.pins",+    "pins_sha256": "37684f9eb41cb375aaf2e59096ff56583924564d09955c50b5febfd5d6d7eef5"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "GND",+      "x": -1.919,+      "y": -0.95,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "2",+      "text": "FB",+      "x": -1.919,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "3",+      "text": "CTRL",+      "x": -1.919,+      "y": 0.95,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "4",+      "text": "SENSE",+      "x": 1.919,+      "y": 0.95,+      "align": "left",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "5",+      "text": "VCC",+      "x": 1.919,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "6",+      "text": "GATE",+      "x": 1.919,+      "y": -0.95,+      "align": "left",+      "vertical": false,+      "h": 0.475+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        -0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        0.0+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        1.1375,+        0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        1.1375,+        0.0+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        1.1375,+        -0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "ap3125aktr-g1",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Diodes Incorporated AC-DC Controllers and Regulators, SOT-26. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,130 @@     "docs/hero.png",     "docs/ap3125aktr-g1-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ap3125aktr-g1-etched.step",+    "ap3125aktr-g1-etched.glb",+    "ap3125aktr-g1-hero.glb",+    "ap3125aktr-g1-hero.overlay.json"+  ],+  "component": {+    "mpn": "AP3125AKTR-G1",+    "manufacturer": "Diodes Incorporated",+    "package": "SOT-26",+    "pin_count": 6,+    "category": "AC-DC Controllers and Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AP3125AKTR-G1.pdf",+    "parts": {+      "symbol": "ap3125aktr-g1.kicad_sym",+      "footprint": "ap3125aktr-g1.kicad_mod",+      "model_3d": "ap3125aktr-g1-hero.glb",+      "model_3d_plain": "ap3125aktr-g1.glb",+      "model_3d_step": "ap3125aktr-g1-etched.step",+      "model_3d_step_plain": "ap3125aktr-g1.step",+      "lbr": "ap3125aktr-g1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground. Current return for driver and control circuits."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Feedback input directly connected to opto-coupler. Input impedance ~15kΩ, sources ~0.27mA when pulled low; controls peak inductor current via IPK=(VFB-0.8)/(3·RS). VFB>4.5V for ~70ms triggers OLP hiccup; VFB<1.55V stops drive pulses (zero-duty threshold). Green-mode threshold ~2.1V."+      },+      {+        "number": "3",+        "name": "CTRL",+        "type": "bidirectional",+        "description": "Latch trigger pin. Sources ~100μA; low-threshold trigger 1V (typ) and high-threshold trigger 3V (typ) invoke latch protection. Leave open if unused; connect an NTC thermistor to GND for external OTP protection. Max sourcing current must be limited below 5mA."+      },+      {+        "number": "4",+        "name": "SENSE",+        "type": "input",+        "description": "Current sense input for primary MOSFET source current. Max sense voltage 0.95V (typ) with VFB=4.5V; FOCP threshold 1.7V (typ) with ~100ns delay; internal 250ns leading-edge blanking. Requires small RC filter/series resistor to protect against turn-off undershoot beyond -0.3V."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage of driver and control circuits. Recommended 10-25V; UVLO(on)=15.8V typ, UVLO(off)=7.6V typ, VCC maintain ~9.1V, VCC OVP ~28.5V, internal clamp ~34V, absolute max 30V. Startup current ~1μA typ; operating current ~0.7-1.2mA."+      },+      {+        "number": "6",+        "name": "GATE",+        "type": "output",+        "description": "Gate driver output for external power MOSFET. Output clamping voltage ~13V (typ), rise time ~150ns and fall time ~50ns into 1nF at VCC=13V, max output current 350mA. Max duty cycle 75% typ."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "lcsc": "C460357",+      "digikey": "31-AP3125AKTR-G1TR-ND",+      "mouser": "621-AP3125AKTR-G1"+    },+    "distributor_check": {+      "checked_at": "2026-10-05T18:52:07Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": "31-AP3125AKTR-G1TR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "621-AP3125AKTR-G1",+        "status": "found"+      }+    },+    "models_3d": [+      {+        "file": "ap3125aktr-g1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ap3125aktr-g1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8c233e1100374d135b25ddd4d8f4be6e416f95877faf9fa7adf25455a084180c",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public"+}