component
AP2822GKBTR-G1
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VOUT", "type": "power_out",- "description": "Switched output voltage from the internal high-side N-MOSFET. On the KB package this pin is tied internally to pin 5 (both are VOUT); place COUT (typ. 1 \u00b5F) close to the pins. Delivers up to 2.0 A on the -G suffix; RDS(on) = 85 m\u03a9 typical."+ "description": "Switched output voltage from the internal high-side N-MOSFET. On the KB package this pin is tied internally to pin 5 (both are VOUT); place COUT (typ. 1 µF) close to the pins. Delivers up to 2.0 A on the -G suffix; RDS(on) = 85 mΩ typical." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "VIN", "type": "power_in",- "description": "Supply input pin, 2.7 V to 5.5 V operating range (6.0 V absolute maximum). Bypass with CIN of 2.2 \u00b5F (recommend 22 \u00b5F if VOUT can be shorted frequently). Also feeds the drain of the internal high-side switch."+ "description": "Supply input pin, 2.7 V to 5.5 V operating range (6.0 V absolute maximum). Bypass with CIN of 2.2 µF (recommend 22 µF if VOUT can be shorted frequently). Also feeds the drain of the internal high-side switch." }, { "number": "4", "name": "EN", "type": "input",- "description": "Chip enable control input. Logic-level input; polarity (active-high or active-low) is set by the ordering suffix - the -G1 (KB) part in the AP2822_N (no auto-discharge) family follows the standard active-high/low variant as ordered. VENH typ 1.6 V, VENL typ 0 V; input current \u00b11 \u00b5A max over 0-5 V."+ "description": "Chip enable control input. Logic-level input; polarity (active-high or active-low) is set by the ordering suffix - the -G1 (KB) part in the AP2822_N (no auto-discharge) family follows the standard active-high/low variant as ordered. VENH typ 1.6 V, VENL typ 0 V; input current ±1 µA max over 0-5 V." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Switched output voltage from the internal high-side N-MOSFET. On the KB package this pin is tied internally to pin 1 (both are VOUT). Provides the current path to the load; supports the auto-discharge pull-down (100-200 \u03a9) on '-A/B/C/D/E/F/G/H' options, disabled on '-AN\u2026HN' options."+ "description": "Switched output voltage from the internal high-side N-MOSFET. On the KB package this pin is tied internally to pin 1 (both are VOUT). Provides the current path to the load; supports the auto-discharge pull-down (100-200 Ω) on '-A/B/C/D/E/F/G/H' options, disabled on '-AN…HN' options." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/ap2822gkbtr-g1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }