component
AP2553AW6-7
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, SOT-26. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Power input, 2.7 V to 5.5 V. Connect a 0.1 \u00b5F or larger ceramic bypass capacitor from IN to GND as close to the IC as possible."+ "description": "Power input, 2.7 V to 5.5 V. Connect a 0.1 µF or larger ceramic bypass capacitor from IN to GND as close to the IC as possible." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable input. Logic high turns the power switch on; logic low disables the switch and activates the internal output discharge path (~600 \u03a9). VIH \u2265 2.0 V, VIL \u2264 0.8 V."+ "description": "Active-high enable input. Logic high turns the power switch on; logic low disables the switch and activates the internal output discharge path (~600 Ω). VIH ≥ 2.0 V, VIL ≤ 0.8 V." }, { "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault output. Asserted during over-current, over-temperature, or reverse-voltage conditions after an 8 ms internal deglitch. Requires an external pull-up resistor (e.g. 10 k\u03a9) to the logic rail; sink current \u2264 10 mA."+ "description": "Active-low open-drain fault output. Asserted during over-current, over-temperature, or reverse-voltage conditions after an 8 ms internal deglitch. Requires an external pull-up resistor (e.g. 10 kΩ) to the logic rail; sink current ≤ 10 mA." }, { "number": "5", "name": "ILIM", "type": "passive",- "description": "Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND to set the current-limit threshold; recommended 10 k\u03a9 \u2264 RLIM \u2264 210 k\u03a9, giving ILIMIT from ~2.36 A down to ~75 mA (typ). ILIM source current \u2264 1 mA."+ "description": "Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND to set the current-limit threshold; recommended 10 kΩ ≤ RLIM ≤ 210 kΩ, giving ILIMIT from ~2.36 A down to ~75 mA (typ). ILIM source current ≤ 1 mA." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched power output to the load. Internal PMOS pass FET (RDS(on) \u2248 70 m\u03a9 typ at VIN = 5 V) connects IN to OUT when enabled. USB applications require \u2265120 \u00b5F of output capacitance."+ "description": "Switched power output to the load. Internal PMOS pass FET (RDS(on) ≈ 70 mΩ typ at VIN = 5 V) connects IN to OUT when enabled. USB applications require ≥120 µF of output capacitance." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/ap2553aw6-7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }