component
AP2553AW6-7
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, SOT-26. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C441827). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+28−8
ap2553aw6-7.lbr+20−2@@ -60,6 +60,18 @@ <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="-0.0000" dx="1.3250" dy="0.6000" layer="1"/> <smd name="6" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="AP2553AW6-7">@@ -102,7 +114,13 @@ <connect gate="G$1" pin="ILIM" pad="5"/> <connect gate="G$1" pin="FAULT" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="AP2553AW6-7" constant="no"/>+ <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+ <attribute name="LCSC_PN" value="C441827" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+8−6@@ -26,13 +26,15 @@ "model_3d_step": "ap2553aw6-7.step", "lbr": "ap2553aw6-7.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C441827"+ }, "pins": [ { "number": "1", "name": "IN", "type": "power_in",- "description": "Power input, 2.7 V to 5.5 V. Connect a 0.1 µF or larger ceramic bypass capacitor from IN to GND as close to the IC as possible."+ "description": "Power input, 2.7 V to 5.5 V. Connect a 0.1 \u00b5F or larger ceramic bypass capacitor from IN to GND as close to the IC as possible." }, { "number": "2",@@ -44,25 +46,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable input. Logic high turns the power switch on; logic low disables the switch and activates the internal output discharge path (~600 Ω). VIH ≥ 2.0 V, VIL ≤ 0.8 V."+ "description": "Active-high enable input. Logic high turns the power switch on; logic low disables the switch and activates the internal output discharge path (~600 \u03a9). VIH \u2265 2.0 V, VIL \u2264 0.8 V." }, { "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault output. Asserted during over-current, over-temperature, or reverse-voltage conditions after an 8 ms internal deglitch. Requires an external pull-up resistor (e.g. 10 kΩ) to the logic rail; sink current ≤ 10 mA."+ "description": "Active-low open-drain fault output. Asserted during over-current, over-temperature, or reverse-voltage conditions after an 8 ms internal deglitch. Requires an external pull-up resistor (e.g. 10 k\u03a9) to the logic rail; sink current \u2264 10 mA." }, { "number": "5", "name": "ILIM", "type": "passive",- "description": "Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND to set the current-limit threshold; recommended 10 kΩ ≤ RLIM ≤ 210 kΩ, giving ILIMIT from ~2.36 A down to ~75 mA (typ). ILIM source current ≤ 1 mA."+ "description": "Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND to set the current-limit threshold; recommended 10 k\u03a9 \u2264 RLIM \u2264 210 k\u03a9, giving ILIMIT from ~2.36 A down to ~75 mA (typ). ILIM source current \u2264 1 mA." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched power output to the load. Internal PMOS pass FET (RDS(on) ≈ 70 mΩ typ at VIN = 5 V) connects IN to OUT when enabled. USB applications require ≥120 µF of output capacitance."+ "description": "Switched power output to the load. Internal PMOS pass FET (RDS(on) \u2248 70 m\u03a9 typ at VIN = 5 V) connects IN to OUT when enabled. USB applications require \u2265120 \u00b5F of output capacitance." } ], "provenance": {