component
AP2511MP-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,7 +38,7 @@ "number": "2", "name": "IN", "type": "power_in",- "description": "Voltage input pin (2.7V to 5.5V operating). Connect a 0.1\u00b5F or larger ceramic capacitor from IN to GND as close as possible. All IN pins must be tied together externally."+ "description": "Voltage input pin (2.7V to 5.5V operating). Connect a 0.1µF or larger ceramic capacitor from IN to GND as close as possible. All IN pins must be tied together externally." }, { "number": "3",@@ -50,19 +50,19 @@ "number": "4", "name": "EN", "type": "input",- "description": "Enable input. Active high on AP2511 (VIH \u2265 2.0V, VIL \u2264 0.8V). Do not leave floating; use a pull resistor."+ "description": "Enable input. Active high on AP2511 (VIH ≥ 2.0V, VIL ≤ 0.8V). Do not leave floating; use a pull resistor." }, { "number": "5", "name": "FLG", "type": "output",- "description": "Over-temperature and over-current fault reporting with 7ms deglitch. Active-low open-drain output (requires external pull-up, e.g., 10k\u03a9). FLG is disabled for 7ms after turn-on."+ "description": "Over-temperature and over-current fault reporting with 7ms deglitch. Active-low open-drain output (requires external pull-up, e.g., 10kΩ). FLG is disabled for 7ms after turn-on." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched voltage output pin. All OUT pins must be tied together externally. Recommended 0.1\u00b5F ceramic plus bulk (e.g., 120\u00b5F) capacitor to GND."+ "description": "Switched voltage output pin. All OUT pins must be tied together externally. Recommended 0.1µF ceramic plus bulk (e.g., 120µF) capacitor to GND." }, { "number": "7",@@ -160,5 +160,8 @@ "docs/ap2511mp-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }