component
AP2411AMP-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# AP2411AMP-13++**Diodes Incorporated** · AC-DC Controllers and Regulators · MSOP-8-EP++AP2411AMP-13 from Diodes Incorporated, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference for the device. All internal voltages are referred to this pin. |+| 2 | IN | power_in | Voltage input pin (2.7 V to 5.5 V). Both IN pins (2 and 3) must be tied together externally. Connect a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible. |+| 3 | IN | power_in | Voltage input pin (2.7 V to 5.5 V). Both IN pins (2 and 3) must be tied together externally. |+| 4 | EN | input | Enable input. Active-high on AP2411A (this variant). VIL max 0.8 V, VIH min 2 V. Typical input leakage 0.01 µA (max 1 µA) at VIN = 5 V. |+| 5 | FLG | output | Over-temperature and over-current fault reporting output. Active-low open-drain (requires external pull-up; typ 10 kΩ to logic supply). Reports faults after a 7 ms typ blanking/deglitch time and is disabled for 7 ms after turn-on. FLG on-resistance ~25 Ω typ at IFLG = 10 mA. |+| 6 | OUT | power_out | Voltage output pin. Both OUT pins (6 and 7) must be tied together externally. Typical 70 mΩ Rds(on) switch to IN when enabled; current limited to ~2.5 A typ with latch-off after 7 ms deglitch on overcurrent. |+| 7 | OUT | power_out | Voltage output pin. Both OUT pins (6 and 7) must be tied together externally. |+| 8 | NC | unconnected | No internal connection. Datasheet recommends tying this pin to the OUT pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Diodes Incorporated |+| Package | MSOP-8-EP |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `AP2411AMP-13`++## CAD (KiCad official)++- Symbol: `AP2411AMP-13`+- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`+- 3D model: MSOP-8-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Diodes Incorporated datasheet](docs/ap2411amp-13-datasheet.pdf) (18 pp, sha256 `0867d4d4385bb394`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ap2411amp-13-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ap2411amp-13",+ "version": "0.1.0",+ "type": "component",+ "description": "Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "ap2411amp-13"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ap2411amp-13.kicad_sym",+ "ap2411amp-13.kicad_mod",+ "ap2411amp-13.glb",+ "ap2411amp-13.step",+ "ap2411amp-13.lbr",+ "docs/hero.png",+ "docs/ap2411amp-13-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}