component
AP2411AMP-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,7 +38,7 @@ "number": "2", "name": "IN", "type": "power_in",- "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins (2 and 3) must be tied together externally. Connect a 0.1 \u00b5F or larger ceramic capacitor from IN to GND as close as possible."+ "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins (2 and 3) must be tied together externally. Connect a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible." }, { "number": "3",@@ -50,19 +50,19 @@ "number": "4", "name": "EN", "type": "input",- "description": "Enable input. Active-high on AP2411A (this variant). VIL max 0.8 V, VIH min 2 V. Typical input leakage 0.01 \u00b5A (max 1 \u00b5A) at VIN = 5 V."+ "description": "Enable input. Active-high on AP2411A (this variant). VIL max 0.8 V, VIH min 2 V. Typical input leakage 0.01 µA (max 1 µA) at VIN = 5 V." }, { "number": "5", "name": "FLG", "type": "output",- "description": "Over-temperature and over-current fault reporting output. Active-low open-drain (requires external pull-up; typ 10 k\u03a9 to logic supply). Reports faults after a 7 ms typ blanking/deglitch time and is disabled for 7 ms after turn-on. FLG on-resistance ~25 \u03a9 typ at IFLG = 10 mA."+ "description": "Over-temperature and over-current fault reporting output. Active-low open-drain (requires external pull-up; typ 10 kΩ to logic supply). Reports faults after a 7 ms typ blanking/deglitch time and is disabled for 7 ms after turn-on. FLG on-resistance ~25 Ω typ at IFLG = 10 mA." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Voltage output pin. Both OUT pins (6 and 7) must be tied together externally. Typical 70 m\u03a9 Rds(on) switch to IN when enabled; current limited to ~2.5 A typ with latch-off after 7 ms deglitch on overcurrent."+ "description": "Voltage output pin. Both OUT pins (6 and 7) must be tied together externally. Typical 70 mΩ Rds(on) switch to IN when enabled; current limited to ~2.5 A typ with latch-off after 7 ms deglitch on overcurrent." }, { "number": "7",@@ -144,5 +144,8 @@ "docs/ap2411amp-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }