component
AP2401MP-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
4 files changed
+440−15
ap2401mp-13-hero.glbadded⋯ 1 unchanged line ⋯
ap2401mp-13-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "AP2401MP-13",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 5.8,+ "dash_mm": 0.145,+ "gap_mm": 0.087,+ "pad_stroke_mm": 0.0348+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.464,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.125,+ 1.125+ ],+ "pads_bbox_mm": [+ -2.9,+ 2.9,+ -1.175,+ 1.175+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "ap2401mp-13-etched.glb",+ "glb_sha256": "5d24e4e6c410cd1fbcfe5ec8b423f115f5d77aa49db782a8b9a1f87589d6a00f",+ "footprint": "ap2401mp-13.kicad_mod",+ "footprint_sha256": "e50b50ea9af4dc66f473091b1af336a222024548cf3c9969b5e08412390e1191",+ "pins": "page.json component.pins",+ "pins_sha256": "8e8d57a2b717ce2888f63bcf108a4bdcc67251cd3878946b2530a302196c7816"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "GND",+ "x": -3.0,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "IN",+ "x": -3.0,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "IN",+ "x": -3.0,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "EN",+ "x": -3.0,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "FLG",+ "x": 3.0,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "OUT",+ "x": 3.0,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "OUT",+ "x": 3.0,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "NC",+ "x": 3.0,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.975+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.325+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.325+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.975+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.975+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.325+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.325+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.975+ ],+ "size_mm": [+ 1.575,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.5,+ 1.8+ ],+ "rot": 0.0+ }+ ]+}
package.json+152−4@@ -1,6 +1,6 @@ { "slug": "ap2401mp-13",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,154 @@ "docs/hero.png", "docs/ap2401mp-13-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ap2401mp-13-etched.glb",+ "ap2401mp-13-etched.step",+ "ap2401mp-13-hero.glb",+ "ap2401mp-13-hero.overlay.json"+ ],+ "component": {+ "mpn": "AP2401MP-13",+ "manufacturer": "Diodes Incorporated",+ "package": "MSOP-8-EP",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.diodes.com/assets/Datasheets/AP2401MP-13.pdf",+ "parts": {+ "symbol": "ap2401mp-13.kicad_sym",+ "footprint": "ap2401mp-13.kicad_mod",+ "model_3d": "ap2401mp-13-hero.glb",+ "model_3d_plain": "ap2401mp-13.glb",+ "model_3d_step": "ap2401mp-13-etched.step",+ "model_3d_step_plain": "ap2401mp-13.step",+ "lbr": "ap2401mp-13.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. All voltages are referenced to this pin."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "power_in",+ "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Enable input, active low on AP2401. VIL ≤ 0.8 V asserts enable; VIH ≥ 2 V disables the switch. Leakage <1 µA typical."+ },+ {+ "number": "5",+ "name": "FLG",+ "type": "output",+ "description": "Fault flag output. Active-low open-drain that reports over-temperature and over-current with a 7 ms typical deglitch/blanking time. Requires an external pull-up resistor (typical 10 kΩ). FLG is disabled for 7 ms after turn-on."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance ≥120 µF plus 0.1 µF ceramic recommended on output."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance ≥120 µF plus 0.1 µF ceramic recommended on output."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Recommended to tie to OUT pins."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.diodes.com/assets/Datasheets/AP2401MP-13.pdf",+ "pages": 18,+ "sha256": "8a66a76a7185a51e",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ap2401mp-13.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.96+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ap2401mp-13-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3.0,+ 0.96+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "89177641809b1259445ba7da6368fb4514327c0665ae0e43df413b2138838116",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "AP2401MP-13",+ "brief": "Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Diodes Incorporated",+ "Package": "MSOP-8-EP",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "ap2401mp-13"+ ],+ "discovery_pitch": "AP2401MP-13 (Diodes Incorporated) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+15−11@@ -4,7 +4,7 @@ "slug": "ap2401mp-13", "title": "AP2401MP-13", "brief": "Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -22,7 +22,7 @@ "parts": { "symbol": "ap2401mp-13.kicad_sym", "footprint": "ap2401mp-13.kicad_mod",- "model_3d": "ap2401mp-13-etched.glb",+ "model_3d": "ap2401mp-13-hero.glb", "model_3d_plain": "ap2401mp-13.glb", "model_3d_step": "ap2401mp-13-etched.step", "model_3d_step_plain": "ap2401mp-13.step",@@ -128,11 +128,11 @@ "seat": "z = 0", "extents_mm": [ 4.9,- 3.0,+ 3, 0.96 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "89177641809b1259445ba7da6368fb4514327c0665ae0e43df413b2138838116", "checked": "2026-11-13",@@ -200,10 +200,14 @@ "docs/hero.png", "docs/ap2401mp-13-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "ap2401mp-13-etched.glb",+ "ap2401mp-13-etched.step",+ "ap2401mp-13-hero.glb",+ "ap2401mp-13-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-24T16:36:28.956Z"-}+ "visibility": "public",+ "updated_at": "2026-09-24T16:36:28.956Z",+ "description": "Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}