component
AP2401MP-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -38,37 +38,37 @@ "number": "2", "name": "IN", "type": "power_in",- "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 \u00b5F or larger ceramic capacitor from IN to GND as close as possible."+ "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible." }, { "number": "3", "name": "IN", "type": "power_in",- "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 \u00b5F or larger ceramic capacitor from IN to GND as close as possible."+ "description": "Voltage input pin (2.7 V to 5.5 V). Both IN pins must be tied together externally. Place a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible." }, { "number": "4", "name": "EN", "type": "input",- "description": "Enable input, active low on AP2401. VIL \u2264 0.8 V asserts enable; VIH \u2265 2 V disables the switch. Leakage <1 \u00b5A typical."+ "description": "Enable input, active low on AP2401. VIL ≤ 0.8 V asserts enable; VIH ≥ 2 V disables the switch. Leakage <1 µA typical." }, { "number": "5", "name": "FLG", "type": "output",- "description": "Fault flag output. Active-low open-drain that reports over-temperature and over-current with a 7 ms typical deglitch/blanking time. Requires an external pull-up resistor (typical 10 k\u03a9). FLG is disabled for 7 ms after turn-on."+ "description": "Fault flag output. Active-low open-drain that reports over-temperature and over-current with a 7 ms typical deglitch/blanking time. Requires an external pull-up resistor (typical 10 kΩ). FLG is disabled for 7 ms after turn-on." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance \u2265120 \u00b5F plus 0.1 \u00b5F ceramic recommended on output."+ "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance ≥120 µF plus 0.1 µF ceramic recommended on output." }, { "number": "7", "name": "OUT", "type": "power_out",- "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance \u2265120 \u00b5F plus 0.1 \u00b5F ceramic recommended on output."+ "description": "Switched voltage output pin. Both OUT pins must be tied together externally. Typical bulk capacitance ≥120 µF plus 0.1 µF ceramic recommended on output." }, { "number": "8",@@ -160,5 +160,8 @@ "docs/ap2401mp-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }