component
AP2303MPTR-G1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Unregulated power input supply (1.2 V to 5.5 V operating). A small 10 \u00b5F MLCC should be connected from this pin to GND. Absolute max -0.3 to 6 V."+ "description": "Unregulated power input supply (1.2 V to 5.5 V operating). A small 10 µF MLCC should be connected from this pin to GND. Absolute max -0.3 to 6 V." }, { "number": "2",@@ -44,13 +44,13 @@ "number": "3", "name": "VREFEN", "type": "input",- "description": "Reference voltage input and active-low shutdown control (0.6 V to VCNTL-2.2 V operating; typical 0.9/0.75/0.675/0.6 V). Pulling below ~0.15 V shuts the device off; releasing initiates a ~0.1 ms soft-start. Output VTT tracks VREFEN within \u00b110 mV."+ "description": "Reference voltage input and active-low shutdown control (0.6 V to VCNTL-2.2 V operating; typical 0.9/0.75/0.675/0.6 V). Pulling below ~0.15 V shuts the device off; releasing initiates a ~0.1 ms soft-start. Output VTT tracks VREFEN within ±10 mV." }, { "number": "4", "name": "VOUT", "type": "power_out",- "description": "Regulated termination voltage output; sources and sinks up to \u00b11.75 A. Requires a minimum 10 \u00b5F ceramic capacitor to ground for stability."+ "description": "Regulated termination voltage output; sources and sinks up to ±1.75 A. Requires a minimum 10 µF ceramic capacitor to ground for stability." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "VCNTL", "type": "power_in",- "description": "Control input supply for the internal control circuitry and pass-device drive (3.0 V to 5.5 V operating; typical 3.3 V or 5 V). Must be kept \u2265 VIN during power-on/off sequences. Draws ~0.5 mA typical, ~30 \u00b5A in shutdown."+ "description": "Control input supply for the internal control circuitry and pass-device drive (3.0 V to 5.5 V operating; typical 3.3 V or 5 V). Must be kept ≥ VIN during power-on/off sequences. Draws ~0.5 mA typical, ~30 µA in shutdown." }, { "number": "7",@@ -144,5 +144,8 @@ "docs/ap2303mptr-g1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }