← Commit history

Set visibility: public

Ray ·ea2f4dcbcb · ·parent 9bb3e1f
1 file changed +8−5
page.json+8−5
@@ -38,7 +38,7 @@         "number": "2",         "name": "IN",         "type": "power_in",-        "description": "Voltage input pin (2.7 V to 5.5 V). Connect a 0.1 \u00b5F or larger ceramic capacitor from IN to GND as close as possible. All IN pins (2, 3) must be tied together externally."+        "description": "Voltage input pin (2.7 V to 5.5 V). Connect a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible. All IN pins (2, 3) must be tied together externally."       },       {         "number": "3",@@ -50,19 +50,19 @@         "number": "4",         "name": "EN",         "type": "input",-        "description": "Enable input. Active low on AP2301 (this MPN). VIL \u2264 0.8 V, VIH \u2265 2.0 V. Do not leave floating; a pull-up (e.g. 10 k\u03a9) is recommended to hold the switch off by default."+        "description": "Enable input. Active low on AP2301 (this MPN). VIL ≤ 0.8 V, VIH ≥ 2.0 V. Do not leave floating; a pull-up (e.g. 10 kΩ) is recommended to hold the switch off by default."       },       {         "number": "5",         "name": "FLG",         "type": "output",-        "description": "Fault report output. Open-drain, active low, asserted on over-current or over-temperature with 7 ms (typ) deglitch. Disabled for 7 ms after turn-on. RFLG on-resistance \u2248 20 \u03a9 typ. Requires an external pull-up resistor."+        "description": "Fault report output. Open-drain, active low, asserted on over-current or over-temperature with 7 ms (typ) deglitch. Disabled for 7 ms after turn-on. RFLG on-resistance ≈ 20 Ω typ. Requires an external pull-up resistor."       },       {         "number": "6",         "name": "OUT",         "type": "power_out",-        "description": "Switched voltage output to the load. All OUT pins (6, 7) must be tied together externally. Recommended 0.1 \u00b5F + bulk (e.g. 120 \u00b5F) output capacitance."+        "description": "Switched voltage output to the load. All OUT pins (6, 7) must be tied together externally. Recommended 0.1 µF + bulk (e.g. 120 µF) output capacitance."       },       {         "number": "7",@@ -156,5 +156,8 @@     "docs/ap2301mpg-13-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file