ap22814bw5-7

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AP22814BW5-7",+    "manufacturer": "Diodes Incorporated",+    "package": "SOT-25",+    "pin_count": 5,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "ap22814bw5-7.kicad_sym",+      "footprint": "ap22814bw5-7.kicad_mod",+      "model_3d": "ap22814bw5-7-etched.glb",+      "model_3d_plain": "ap22814bw5-7.glb",+      "model_3d_step": "ap22814bw5-7-etched.step",+      "model_3d_step_plain": "ap22814bw5-7.step",+      "lbr": "ap22814bw5-7.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT",+        "type": "power_out",+        "description": "Switched voltage output pin. Connect a 0.1µF ceramic bypass capacitor plus a high-value bulk capacitor (≥10µF for USB, typ. 100µF/120µF) to GND close to the IC. Delivers up to 3.0A (AP22814) with ~50mΩ typical on-resistance; internally discharged to GND via ~90Ω when the switch is disabled."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference for all internal circuitry. Tie to the system ground plane with a low-impedance connection close to the input and output bypass capacitors."+      },+      {+        "number": "3",+        "name": "FLG",+        "type": "output",+        "description": "Open-drain fault flag output, active low. Asserts after a ~6ms deglitch on over-current or over-temperature conditions and remains asserted until both faults clear. Requires an external pull-up resistor (typ. 10kΩ) to a supply rail; FET on-resistance ≈40Ω (60Ω max) at 10mA, off-leakage ≤1µA."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable input (active LOW on the 'B' variant AP22814BW5-7). VIL ≤ 0.65V max drives the switch ON; VIH ≥ 1.5V drives it OFF. GPIO-compatible logic input; must NOT be left floating. Leakage ≤1µA at 0V or 5.5V. Hold in the disabled state while VIN is applied or removed."+      },+      {+        "number": "5",+        "name": "IN",+        "type": "power_in",+        "description": "Main input supply pin, 2.7V to 5.5V operating range (absolute max 6.0V). Connect a 1µF X7R/X5R low-ESR ceramic bypass capacitor to GND close to the IC; add a 10µF or 47µF bulk capacitor for heavy transient loads. UVLO releases at ~2.0V rising with ~180mV hysteresis."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}