component
AP22811AW5-7
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -36,6 +36,20 @@ AP22811AW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions - Footprint: `Package_TO_SOT_SMD:SOT-23-5` - 3D model: SOT-25 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`ap22811aw5-7.step`](ap22811aw5-7.step) | 85 KB | You want the bare part, or you mark your own boards. |+| [`ap22811aw5-7-etched.step`](ap22811aw5-7-etched.step) | 1.9 MB | You want the part with `AP22811AW5-7` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 486 faces against 102 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "ap22811aw5-7",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+9−9@@ -4,7 +4,7 @@ "slug": "ap22811aw5-7", "title": "AP22811AW5-7", "brief": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Switched voltage output pin. Connect a 0.1 \u00b5F bypass capacitor plus a high-value bulk capacitor (at least 10 \u00b5F for USB applications) to GND, close to the IC."+ "description": "Switched voltage output pin. Connect a 0.1 µF bypass capacitor plus a high-value bulk capacitor (at least 10 µF for USB applications) to GND, close to the IC." }, { "number": "2",@@ -46,19 +46,19 @@ "number": "3", "name": "FLG", "type": "output",- "description": "Open-drain fault report output. Asserts low when an over-current or over-temperature condition is detected (asserted/deasserted after the 6 ms typ. blanking time). Requires an external pull-up resistor (e.g. 10 k\u03a9). FLG FET on-resistance ~40 \u03a9."+ "description": "Open-drain fault report output. Asserts low when an over-current or over-temperature condition is detected (asserted/deasserted after the 6 ms typ. blanking time). Requires an external pull-up resistor (e.g. 10 kΩ). FLG FET on-resistance ~40 Ω." }, { "number": "4", "name": "EN", "type": "input",- "description": "Enable input. AP22811A variant is active-high: drive above VIH (1.5 V min) to enable the switch, below VIL (0.5 V max) to disable. Do not float. Enable input leakage \u22641 \u00b5A."+ "description": "Enable input. AP22811A variant is active-high: drive above VIH (1.5 V min) to enable the switch, below VIL (0.5 V max) to disable. Do not float. Enable input leakage ≤1 µA." }, { "number": "5", "name": "IN", "type": "power_in",- "description": "Input supply pin, 2.7 V to 5.5 V. Connect a 1 \u00b5F low-ESR bypass capacitor to GND close to the IC."+ "description": "Input supply pin, 2.7 V to 5.5 V. Connect a 1 µF low-ESR bypass capacitor to GND close to the IC." } ], "provenance": {@@ -132,9 +132,9 @@ "docs/hero.png", "docs/ap22811aw5-7-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D." }