ap2112k-1-2trg1

@@ -33,5 +33,61 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AP2112K-1.2TRG1",+    "manufacturer": "Diodes Incorporated AP2112K 1 2TRG1",+    "package": "SOT-25",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AP2112K-1.2TRG1.pdf",+    "parts": {+      "symbol": "ap2112k-1-2trg1.kicad_sym",+      "footprint": "ap2112k-1-2trg1.kicad_mod",+      "model_3d": "ap2112k-1-2trg1-etched.glb",+      "model_3d_plain": "ap2112k-1-2trg1.glb",+      "model_3d_step": "ap2112k-1-2trg1-etched.step",+      "model_3d_step_plain": "ap2112k-1-2trg1.step",+      "lbr": "ap2112k-1-2trg1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage. Recommended operating range 2.5V to 6.0V (absolute max 6.5V). Bypass with a 1.0µF ceramic capacitor (X5R/X7R) to GND close to the pin."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference for the internal reference, error amplifier, and pass FET return current."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Chip enable input. Drive high (VIH ≥ 1.5V, up to 6.0V) for normal operation; drive low (VIL ≤ 0.4V) to shut down the regulator. Internal ~3MΩ pull-down to GND; when EN is low, VOUT is discharged through an internal ~60Ω resistor."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND per board practice."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 1.2V output (±1.5% accuracy) capable of 600mA (min). Requires a 1.0µF ceramic/tantalum/aluminum electrolytic capacitor to GND for stability. Foldback short-circuit protection limits current to ~50mA into a shorted output."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}