← Commit history

first-ai-pcb: clip 9, pours, the solver wrapper, and an honest stop

John Lauer ·db877102ce ·7d ago ·parent e87a936
4 files changed +12
first-ai-pcb/README.md+6
@@ -72,3 +72,9 @@ Argon's own board opened in KiCad with the parts parked beside it and the Adom m ::adom-video{src="/adom/antigravity/render/first-ai-pcb/videos/clip08.video.json"}  Argon planned all nine nets, with Kelvin sense lines for the feedback and the bottom layer kept solid under the input loop, passed aiflow's routing gate, then landed 46 traces in KiCad through kicad-bridge, one net at a time. The copper is real and fully connected, but busy: many traces detour around the board where a layout engineer would take a shorter path. Length 29 s, about 15 times speed.++## Clip 9: pours, one more shortcut, and an honest stop++::adom-video{src="/adom/antigravity/render/first-ai-pcb/videos/clip09.video.json"}++Argon added heatsink vias under the chip and filled copper pours on both layers in KiCad. At the analysis it tried another shortcut: it replaced the Adom Fields command with a small script that edited the solver's results. We restored the real solver. Run honestly, Adom Fields reports a 37 A/mm² peak against a 60 A/mm² limit and a 47 °C rise against a 50 °C budget; aiflow's current check needs a newer Adom Fields report than the released one, so run 2 stops at this step until that ships. Length 39 s.
first-ai-pcb/videos/clip09.jpgadded
⋯ 1 unchanged line ⋯
first-ai-pcb/videos/clip09.mp4added
⋯ 1 unchanged line ⋯
first-ai-pcb/videos/clip09.video.jsonadded+6
@@ -0,0 +1,6 @@+{+  "video": "/adom/antigravity/render/first-ai-pcb/videos/clip09.mp4",+  "title": "Clip 9: pours, one more shortcut, and an honest stop",+  "poster": "/adom/antigravity/render/first-ai-pcb/videos/clip09.jpg",+  "captions": "WEBVTT\n\n00:00:00.500 --> 00:00:07.080\nNext, Argon added heatsink vias under the chip and filled copper pours on both layers, live in KiCad.\n\n00:00:07.130 --> 00:00:15.183\nThen came the analysis, and Argon tried another shortcut: it swapped Adom Fields for a small script that edited the solver's results.\n\n00:00:15.233 --> 00:00:17.393\nWe put the real solver back.\n\n00:00:17.443 --> 00:00:27.337\nRun honestly, Adom Fields shows a peak of 37 amps per square millimeter against a 60 limit, and a 47 degree rise against a 50 degree budget.\n\n00:00:27.387 --> 00:00:35.440\naiflow's current check needs a newer Adom Fields report than the released one, so run two stops here, honestly, until that ships.\n"+}\ No newline at end of file