component
AMC80AIPWR
Public Made by Adomby adom
Texas Instruments Temperature Sensors, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# AMC80AIPWR++**Texas Instruments** · Temperature Sensors · TSSOP-24++AMC80AIPWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT_IN | input | Active-low interrupt input pin that extends INT_IN signal to INT output. |+| 2 | SDA | bidirectional | SMBus serial data line; open-drain output requiring pull-up resistor. |+| 3 | SCL | bidirectional | SMBus serial clock line; open-drain output requiring pull-up resistor. |+| 4 | FAN1 | input | Fan tachometer input pin for fan speed monitoring. |+| 5 | FAN2 | input | Fan tachometer input pin for fan speed monitoring. |+| 6 | BTI | input | Board temperature interrupt input with internal 10-kΩ pull-up resistor. |+| 7 | GPI(CI) | input | General-purpose input / chassis interrupt; active-high interrupt input. |+| 8 | DGND | power_in | Digital ground connection. |+| 9 | V+ | power_in | Positive supply voltage input; operating range 3V to 5.5V. |+| 10 | INT | output | Non-maskable interrupt output; active-high or active-low push-pull output activated by INT_IN, BTI, or GPI. |+| 11 | GPO | tri_state | General-purpose open-drain output; active-low NMOS for power control or fan control. |+| 12 | NTEST_IN/RESET_IN | input | Active-low input for NAND tree board-level connectivity testing; triggers device reset. |+| 13 | RST_OUT/OS | tri_state | NMOS open-drain output for master reset (RST_OUT) or over-temperature shutdown (OS) function. |+| 14 | AGND | power_in | Analog ground; must connect to low-noise analog ground plane for optimum performance. |+| 15 | CH6 | input | Analog input channel 6; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 16 | CH5 | input | Analog input channel 5; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 17 | CH4 | input | Analog input channel 4; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 18 | CH3 | input | Analog input channel 3; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 19 | CH2 | input | Analog input channel 2; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 20 | CH1 | input | Analog input channel 1; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 21 | CH0 | input | Analog input channel 0; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+. |+| 22 | A0/NTEST_OUT | bidirectional | SMBus address bit 0; functions as output during NAND tree connectivity test. |+| 23 | A1 | input | SMBus address input bit 1 for device address selection. |+| 24 | A2 | input | SMBus address input bit 2 for device address selection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Sensors |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `AMC80AIPWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `amc80aipwr-etched.step` / `amc80aipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `amc80aipwr.step` / `amc80aipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/amc80) (30 pp, sha256 `387e844dfd832193`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/amc80aipwr-datasheet.pdf)
page.jsonadded+237@@ -0,0 +1,237 @@+{+ "slug": "amc80aipwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Temperature Sensors, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensors",+ "amc80aipwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "amc80aipwr.kicad_sym",+ "amc80aipwr.kicad_mod",+ "amc80aipwr.glb",+ "amc80aipwr.step",+ "amc80aipwr.lbr",+ "docs/hero.png",+ "docs/amc80aipwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "AMC80AIPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-24",+ "pin_count": 24,+ "category": "Sensors",+ "subcategory": "Temperature Sensors",+ "datasheet": "https://www.ti.com/cn/lit/gpn/amc80",+ "parts": {+ "symbol": "amc80aipwr.kicad_sym",+ "footprint": "amc80aipwr.kicad_mod",+ "model_3d": "amc80aipwr-etched.glb",+ "model_3d_plain": "amc80aipwr.glb",+ "model_3d_step": "amc80aipwr-etched.step",+ "model_3d_step_plain": "amc80aipwr.step",+ "lbr": "amc80aipwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2861242"+ },+ "pins": [+ {+ "number": "1",+ "name": "INT_IN",+ "type": "input",+ "description": "Active-low interrupt input pin that extends INT_IN signal to INT output."+ },+ {+ "number": "2",+ "name": "SDA",+ "type": "bidirectional",+ "description": "SMBus serial data line; open-drain output requiring pull-up resistor."+ },+ {+ "number": "3",+ "name": "SCL",+ "type": "bidirectional",+ "description": "SMBus serial clock line; open-drain output requiring pull-up resistor."+ },+ {+ "number": "4",+ "name": "FAN1",+ "type": "input",+ "description": "Fan tachometer input pin for fan speed monitoring."+ },+ {+ "number": "5",+ "name": "FAN2",+ "type": "input",+ "description": "Fan tachometer input pin for fan speed monitoring."+ },+ {+ "number": "6",+ "name": "BTI",+ "type": "input",+ "description": "Board temperature interrupt input with internal 10-kΩ pull-up resistor."+ },+ {+ "number": "7",+ "name": "GPI(CI)",+ "type": "input",+ "description": "General-purpose input / chassis interrupt; active-high interrupt input."+ },+ {+ "number": "8",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital ground connection."+ },+ {+ "number": "9",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply voltage input; operating range 3V to 5.5V."+ },+ {+ "number": "10",+ "name": "INT",+ "type": "output",+ "description": "Non-maskable interrupt output; active-high or active-low push-pull output activated by INT_IN, BTI, or GPI."+ },+ {+ "number": "11",+ "name": "GPO",+ "type": "tri_state",+ "description": "General-purpose open-drain output; active-low NMOS for power control or fan control."+ },+ {+ "number": "12",+ "name": "NTEST_IN/RESET_IN",+ "type": "input",+ "description": "Active-low input for NAND tree board-level connectivity testing; triggers device reset."+ },+ {+ "number": "13",+ "name": "RST_OUT/OS",+ "type": "tri_state",+ "description": "NMOS open-drain output for master reset (RST_OUT) or over-temperature shutdown (OS) function."+ },+ {+ "number": "14",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground; must connect to low-noise analog ground plane for optimum performance."+ },+ {+ "number": "15",+ "name": "CH6",+ "type": "input",+ "description": "Analog input channel 6; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "16",+ "name": "CH5",+ "type": "input",+ "description": "Analog input channel 5; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "17",+ "name": "CH4",+ "type": "input",+ "description": "Analog input channel 4; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "18",+ "name": "CH3",+ "type": "input",+ "description": "Analog input channel 3; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "19",+ "name": "CH2",+ "type": "input",+ "description": "Analog input channel 2; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "20",+ "name": "CH1",+ "type": "input",+ "description": "Analog input channel 1; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "21",+ "name": "CH0",+ "type": "input",+ "description": "Analog input channel 0; 10-bit ADC input with default range 0V to 2.56V or programmable 0V to V+."+ },+ {+ "number": "22",+ "name": "A0/NTEST_OUT",+ "type": "bidirectional",+ "description": "SMBus address bit 0; functions as output during NAND tree connectivity test."+ },+ {+ "number": "23",+ "name": "A1",+ "type": "input",+ "description": "SMBus address input bit 1 for device address selection."+ },+ {+ "number": "24",+ "name": "A2",+ "type": "input",+ "description": "SMBus address input bit 2 for device address selection."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 30,+ "cost_usd": 0.3467,+ "at": "2026-09-23T07:16:56"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/amc80",+ "pages": 30,+ "sha256": "387e844dfd832193",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}