amc1311qdwvrq1

@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AMC1311QDWVRQ1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8-300mil",+    "pin_count": 8,+    "category": "Isolation Amplifiers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/amc1311qdwvrq1.pdf",+    "parts": {+      "symbol": "amc1311qdwvrq1.kicad_sym",+      "footprint": "amc1311qdwvrq1.kicad_mod",+      "model_3d": "amc1311qdwvrq1-etched.glb",+      "model_3d_plain": "amc1311qdwvrq1.glb",+      "model_3d_step": "amc1311qdwvrq1-etched.step",+      "model_3d_step_plain": "amc1311qdwvrq1.step",+      "lbr": "amc1311qdwvrq1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD1",+        "type": "power_in",+        "description": "High-side (input-side) power supply, 3.0 V to 5.5 V referenced to GND1. Bypass to GND1 with a low-ESR ceramic (typically 100 nF close to the pin plus a bulk 1-10 µF)."+      },+      {+        "number": "2",+        "name": "VINP",+        "type": "input",+        "description": "Non-inverting (positive) high-impedance analog input. Linear differential input range is ±2 V (full-scale ±2 V) relative to VINN, with a typical differential input impedance of ~1.25 GΩ. Referenced to GND1."+      },+      {+        "number": "3",+        "name": "VINN",+        "type": "input",+        "description": "Inverting (negative) high-impedance analog input, typically tied to the low-side reference of the sensed node. Common-mode input range and ±2 V differential range are referenced to GND1."+      },+      {+        "number": "4",+        "name": "GND1",+        "type": "power_in",+        "description": "High-side (input-side) analog ground reference. All VDD1, VINP and VINN signals are referenced to this pin; it is isolated from GND2 across the reinforced isolation barrier."+      },+      {+        "number": "5",+        "name": "GND2",+        "type": "power_in",+        "description": "Low-side (output-side) ground reference for VDD2, VOUTP and VOUTN. Isolated from GND1 by the reinforced capacitive isolation barrier (up to 7 kVpk)."+      },+      {+        "number": "6",+        "name": "VOUTN",+        "type": "output",+        "description": "Inverting (negative) side of the differential analog output, referenced to GND2. Output common-mode is nominally VDD2/2 and the full-scale differential output swing is ±2 V. Drive to a downstream differential ADC input or an instrumentation amplifier."+      },+      {+        "number": "7",+        "name": "VOUTP",+        "type": "output",+        "description": "Non-inverting (positive) side of the differential analog output, referenced to GND2. Together with VOUTN forms the ±2 V full-scale differential output with a VDD2/2 common-mode."+      },+      {+        "number": "8",+        "name": "VDD2",+        "type": "power_in",+        "description": "Low-side (output-side) power supply, 3.0 V to 5.5 V referenced to GND2. Bypass to GND2 with a low-ESR ceramic (typically 100 nF close to the pin plus a bulk 1-10 µF)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}