component
AMC1303M0510DWVR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# AMC1303M0510DWVR++**Texas Instruments** · ADCs/DACs - Special Purpose · SOIC-8-300mil++AMC1303M0510DWVR from Texas Instruments, in a SOIC-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVDD | power_in | Analog (high-side) supply for the isolated front end, specified at 3.0 V to 5.5 V relative to AGND; decouple per the power-supply recommendations. |+| 2 | AINP | input | Non-inverting analog input; the linear differential full-scale range is ±50 mV for the AMC1303x05x devices, and the input must stay within AGND - 6 V to AVDD + 0.5 V (input current limited to 10 mA if exceeded). |+| 3 | AINN | input | Inverting analog input, typically connected to the low side of the shunt resistor; the same AGND - 6 V to AVDD + 0.5 V input limits and ±50 mV linear full-scale range apply. |+| 4 | AGND | power_in | Analog (high-side) ground reference for the isolated front end and the AINP/AINN inputs. |+| 5 | DGND | power_in | Digital (controller-side) ground reference for the DOUT and CLKOUT outputs and the controller-side supply DVDD. |+| 6 | DOUT | output | Modulator bitstream output; on the AMC1303Mx it is an uncoded bitstream, and its voltage must stay between DGND - 0.5 V and DVDD + 0.5 V. |+| 7 | CLKOUT | output | Modulator clock output at a nominal 10 MHz (AMC1303Mxx10) or 20 MHz (AMC1303Mxx20), with a 45% to 55% duty cycle; the voltage limit is DGND - 0.5 V to DVDD + 0.5 V. |+| 8 | DVDD | power_in | Digital (controller-side) supply, specified at 2.7 V to 5.5 V relative to DGND; decouple per the power-supply recommendations. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8-300mil |+| Category | Data Acquisition |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `AMC1303M0510DWVR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8-300mil (KiCad packages3D, STEP)+- 3D model files: `amc1303m0510dwvr-etched.step` / `amc1303m0510dwvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `amc1303m0510dwvr.step` / `amc1303m0510dwvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/amc1303e2510) (45 pp, sha256 `6eb647c46fade7b8`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/amc1303m0510dwvr-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "amc1303m0510dwvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments ADCs/DACs - Special Purpose, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "amc1303m0510dwvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "amc1303m0510dwvr.kicad_sym",+ "amc1303m0510dwvr.kicad_mod",+ "amc1303m0510dwvr.glb",+ "amc1303m0510dwvr.step",+ "amc1303m0510dwvr.lbr",+ "docs/hero.png",+ "docs/amc1303m0510dwvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "amc1303m0510dwvr-hero.glb",+ "amc1303m0510dwvr-hero.overlay.json"+ ],+ "component": {+ "mpn": "AMC1303M0510DWVR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8-300mil",+ "pin_count": 8,+ "category": "Data Acquisition",+ "subcategory": "ADCs/DACs - Special Purpose",+ "datasheet": "https://www.ti.com/cn/lit/gpn/amc1303e2510",+ "parts": {+ "symbol": "amc1303m0510dwvr.kicad_sym",+ "footprint": "amc1303m0510dwvr.kicad_mod",+ "model_3d": "amc1303m0510dwvr-hero.glb",+ "model_3d_plain": "amc1303m0510dwvr.glb",+ "model_3d_step": "amc1303m0510dwvr-etched.step",+ "model_3d_step_plain": "amc1303m0510dwvr.step",+ "lbr": "amc1303m0510dwvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2878154",+ "digikey": "296-50929-2-ND",+ "mouser": "595-AMC1303M0510DWVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T17:57:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-50929-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-AMC1303M0510DWVR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog (high-side) supply for the isolated front end, specified at 3.0 V to 5.5 V relative to AGND; decouple per the power-supply recommendations."+ },+ {+ "number": "2",+ "name": "AINP",+ "type": "input",+ "description": "Non-inverting analog input; the linear differential full-scale range is ±50 mV for the AMC1303x05x devices, and the input must stay within AGND - 6 V to AVDD + 0.5 V (input current limited to 10 mA if exceeded)."+ },+ {+ "number": "3",+ "name": "AINN",+ "type": "input",+ "description": "Inverting analog input, typically connected to the low side of the shunt resistor; the same AGND - 6 V to AVDD + 0.5 V input limits and ±50 mV linear full-scale range apply."+ },+ {+ "number": "4",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog (high-side) ground reference for the isolated front end and the AINP/AINN inputs."+ },+ {+ "number": "5",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital (controller-side) ground reference for the DOUT and CLKOUT outputs and the controller-side supply DVDD."+ },+ {+ "number": "6",+ "name": "DOUT",+ "type": "output",+ "description": "Modulator bitstream output; on the AMC1303Mx it is an uncoded bitstream, and its voltage must stay between DGND - 0.5 V and DVDD + 0.5 V."+ },+ {+ "number": "7",+ "name": "CLKOUT",+ "type": "output",+ "description": "Modulator clock output at a nominal 10 MHz (AMC1303Mxx10) or 20 MHz (AMC1303Mxx20), with a 45% to 55% duty cycle; the voltage limit is DGND - 0.5 V to DVDD + 0.5 V."+ },+ {+ "number": "8",+ "name": "DVDD",+ "type": "power_in",+ "description": "Digital (controller-side) supply, specified at 2.7 V to 5.5 V relative to DGND; decouple per the power-supply recommendations."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet pin table (page 3) covers the AMC1303Mx DWV SOIC-8 variants, which share one pinout; A; Pin descriptions are paraphrased from the Chinese (TI translation) datasheet text; limits are quoted; The schema has no field for headline specs, so the supply and temperature ratings (AVDD 3.0–5.5 V, D"+ ],+ "pages_sent": 27,+ "cost_usd": 0.1495,+ "at": "2026-10-08T17:56:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/amc1303e2510",+ "pages": 45,+ "sha256": "6eb647c46fade7b8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "amc1303m0510dwvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "amc1303m0510dwvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "bd3876461c1739985fbd1d49d0c2a6f43d2b76a90fc0e5fb1d7013f49ee69539",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}