component
AMC1300DWVR
Public Made by Adomby adom
Texas Instruments Special Purpose Amplifiers, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
amc1300dwvr: specified limits as data (metadata.characteristics, 51 rows from the datasheet)
2 files changed
+677
README.md+58@@ -26,6 +26,64 @@ AMC1300DWVR from Texas Instruments, in a SOIC-8-300mil. Pinout and pin descripti | Category | Amplifiers/Comparators | | Pins | 8 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| High-side power supply, VDD1 to GND1 (AMC1300) | VDD1 | 4.5 | 5 | 5.5 | V | VDD1 to GND1, AMC1300 | 6 |+| Low-side power supply, VDD2 to GND2 | VDD2 | 3 | 3.3 | 5.5 | V | VDD2 to GND2 | 6 |+| Differential input voltage before clipping output | VClipping | -320 | | 320 | mV | VIN = VINP - VINN | 6 |+| Specified linear differential full-scale voltage | VFSR | -250 | | 250 | mV | VIN = VINP - VINN | 6 |+| Absolute common-mode input voltage | | -2 | | | V | (VINP+VINN)/2 to GND1 | 6 |+| Operating common-mode input voltage | VCM | -0.16 | | | V | (VINP+VINN)/2 to GND1 | 6 |+| Specified ambient temperature, AMC1300 | TA | -40 | | 125 | °C | AMC1300 | 6 |+| Absolute maximum VDD1 to GND1 | VDD1 | -0.3 | | 6.5 | V | High-side VDD1 to GND1 | 6 |+| Absolute maximum VDD2 to GND2 | VDD2 | -0.3 | | 6.5 | V | Low-side VDD2 to GND2 | 6 |+| Input current, continuous, any pin except power-supply pins | | -10 | | 10 | mA | Continuous, any pin except power-supply pins | 6 |+| Junction temperature | TJ | | | 150 | °C | | 6 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |+| Common-mode overvoltage detection hysteresis | | | 60 | | mV | | 10 |+| Input offset voltage, initial, AMC1300 | VOS | -2 | 0.01 | 2 | mV | AMC1300, initial, at TA = 25°C, VINP = VINN = GND1 | 10 |+| Input offset drift, AMC1300 | TCVOS | -4 | 1.3 | 4 | uV/°C | AMC1300 | 10 |+| Input bias current | IIB | -41 | -30 | -24 | uA | INP = INN = GND1; IIB = (IIBP+IIBN) / 2 | 10 |+| Input offset current | IIO | -5 | | 5 | nA | IIO = IIBP - IIBN | 10 |+| Gain error, initial, AMC1300 | EG | -1 | 0.4 | 1 | % | AMC1300, initial, at TA = 25°C | 10 |+| Gain error drift, AMC1300 | TCEG | -50 | | 50 | ppm/°C | AMC1300 | 10 |+| Nonlinearity | | -0.03 | 0.01 | 0.03 | % | | 10 |+| Signal-to-noise ratio | SNR | 81.5 | 85 | | dB | fIN = 1 kHz, BW = 10 kHz | 10 |+| Common-mode output voltage | VCMout | 1.39 | 1.44 | 1.49 | V | | 10 |+| Clipping differential output voltage | VCLIPout | -2.52 | 2.49 | 2.52 | V | VOUT = (VOUTP – VOUTN); /VIN/ = /VINP – VINN/ > /VClipping/ | 10 |+| Failsafe differential output voltage | VFAILSAFE | -2.63 | -2.57 | -2.53 | V | VCM ≥ VCMov, or VDD1 missing | 10 |+| Output bandwidth, AMC1300 | BWOUT | 170 | 230 | | kHz | AMC1300 | 11 |+| Output resistance | ROUT | | | 0.2 | Ω | On OUTP or OUTN | 11 |+| Common-mode transient immunity, AMC1300 | CMTI | 15 | 30 | | kV/µs | /GND1 – GND2/ = 1 kV | 11 |+| VDD1 undervoltage detection threshold voltage | VDD1UV | 2.4 | 2.6 | 2.8 | V | VDD1 falling | 11 |+| High-side supply current | IDD1 | | 7.2 | 9.8 | mA | 4.5 V ≤ VDD1 ≤ 5.5 V | 11 |+| Low-side supply current | IDD2 | | 5.3 | 7.2 | mA | 3.0 V ≤ VDD2 ≤ 3.6 V | 11 |+| Low-side supply current | IDD2 | | 5.9 | 8.1 | mA | 4.5 V ≤ VDD2 ≤ 5.5 V | 11 |+| Common-mode rejection ratio | CMRR | | -100 | | dB | fIN = 0 Hz, VCM min ≤ VCM ≤ VCM max | 10 |+| Common-mode rejection ratio | CMRR | | -98 | | dB | fIN = 10 kHz, VCM min ≤ VCM ≤ VCM max | 10 |+| Single-ended input resistance | RIN | | 19 | | kΩ | INN = GND1 | 10 |+| Differential input resistance | RIND | | 22 | | kΩ | | 10 |+| Single-ended input capacitance | CIN | | 2 | | pF | INN = GND1, fIN = 275 kHz | 10 |+| Differential input capacitance | CIND | | 1 | | pF | fIN = 275 kHz | 10 |+| Nominal gain | | | 8.2 | | | | 10 |+| Total harmonic distortion | THD | | -85 | | dB | fIN = 10 kHz | 10 |+| Output noise | | | 230 | | uVRMS | INP = INN = GND1, fIN = 0 Hz, BW = 100 kHz brickwall filter | 10 |+| Signal-to-noise ratio | SNR | | 72 | | dB | fIN = 10 kHz, BW = 100 kHz | 10 |+| Power-supply rejection ratio vs VDD1 | PSRR | | -103 | | dB | at DC | 10 |+| Power-supply rejection ratio vs VDD1 | PSRR | | -96 | | dB | 100-mV and 10-kHz ripple | 10 |+| Power-supply rejection ratio vs VDD2 | PSRR | | -106 | | dB | at DC | 10 |+| Power-supply rejection ratio vs VDD2 | PSRR | | -86 | | dB | 100-mV and 10-kHz ripple | 10 |+| Output short-circuit current | | | 14 | | mA | On OUTP or OUTN, sourcing or sinking, INN = INP = GND1, outputs shorted to either GND2 or VDD2 | 11 |+| Junction-to-ambient thermal resistance | RθJA | | 85.4 | | °C/W | | 7 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 26.8 | | °C/W | | 7 |+| Junction-to-board thermal resistance | RθJB | | 43.5 | | °C/W | | 7 |+| Junction-to-top characterization parameter | ψJT | | 4.8 | | °C/W | | 7 |+| Junction-to-board characterization parameter | ψJB | | 41.2 | | °C/W | | 7 |+ ## CAD (KiCad official) - Symbol: `AMC1300DWVR`
page.json+619@@ -163,6 +163,625 @@ "Package": "SOIC-8-300mil", "Category": "Amplifiers/Comparators", "Pins": "8"+ },+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "datasheet_sha256": "62a3f250106ff0f2",+ "rows": [+ {+ "name": "High-side power supply, VDD1 to GND1 (AMC1300)",+ "symbol": "VDD1",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 4.5,+ "typ": 5,+ "max": 5.5,+ "conditions": "VDD1 to GND1, AMC1300",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Low-side power supply, VDD2 to GND2",+ "symbol": "VDD2",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 3,+ "typ": 3.3,+ "max": 5.5,+ "conditions": "VDD2 to GND2",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Differential input voltage before clipping output",+ "symbol": "VClipping",+ "kind": "recommended_operating",+ "unit": "mV",+ "min": -320,+ "typ": null,+ "max": 320,+ "conditions": "VIN = VINP - VINN",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Specified linear differential full-scale voltage",+ "symbol": "VFSR",+ "kind": "recommended_operating",+ "unit": "mV",+ "min": -250,+ "typ": null,+ "max": 250,+ "conditions": "VIN = VINP - VINN",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Absolute common-mode input voltage",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "V",+ "min": -2,+ "typ": null,+ "max": null,+ "conditions": "(VINP+VINN)/2 to GND1",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Operating common-mode input voltage",+ "symbol": "VCM",+ "kind": "recommended_operating",+ "unit": "V",+ "min": -0.16,+ "typ": null,+ "max": null,+ "conditions": "(VINP+VINN)/2 to GND1",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Specified ambient temperature, AMC1300",+ "symbol": "TA",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 125,+ "conditions": "AMC1300",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Absolute maximum VDD1 to GND1",+ "symbol": "VDD1",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 6.5,+ "conditions": "High-side VDD1 to GND1",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Absolute maximum VDD2 to GND2",+ "symbol": "VDD2",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 6.5,+ "conditions": "Low-side VDD2 to GND2",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Input current, continuous, any pin except power-supply pins",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "mA",+ "min": -10,+ "typ": null,+ "max": 10,+ "conditions": "Continuous, any pin except power-supply pins",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Junction temperature",+ "symbol": "TJ",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": null,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Storage temperature",+ "symbol": "Tstg",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -65,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Common-mode overvoltage detection hysteresis",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": 60,+ "max": null,+ "conditions": "",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Input offset voltage, initial, AMC1300",+ "symbol": "VOS",+ "kind": "electrical",+ "unit": "mV",+ "min": -2,+ "typ": 0.01,+ "max": 2,+ "conditions": "AMC1300, initial, at TA = 25°C, VINP = VINN = GND1",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Input offset drift, AMC1300",+ "symbol": "TCVOS",+ "kind": "temperature_coefficient",+ "unit": "uV/°C",+ "min": -4,+ "typ": 1.3,+ "max": 4,+ "conditions": "AMC1300",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Input bias current",+ "symbol": "IIB",+ "kind": "electrical",+ "unit": "uA",+ "min": -41,+ "typ": -30,+ "max": -24,+ "conditions": "INP = INN = GND1; IIB = (IIBP+IIBN) / 2",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Input offset current",+ "symbol": "IIO",+ "kind": "electrical",+ "unit": "nA",+ "min": -5,+ "typ": null,+ "max": 5,+ "conditions": "IIO = IIBP - IIBN",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Gain error, initial, AMC1300",+ "symbol": "EG",+ "kind": "electrical",+ "unit": "%",+ "min": -1,+ "typ": 0.4,+ "max": 1,+ "conditions": "AMC1300, initial, at TA = 25°C",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Gain error drift, AMC1300",+ "symbol": "TCEG",+ "kind": "temperature_coefficient",+ "unit": "ppm/°C",+ "min": -50,+ "typ": null,+ "max": 50,+ "conditions": "AMC1300",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Nonlinearity",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": -0.03,+ "typ": 0.01,+ "max": 0.03,+ "conditions": "",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Signal-to-noise ratio",+ "symbol": "SNR",+ "kind": "electrical",+ "unit": "dB",+ "min": 81.5,+ "typ": 85,+ "max": null,+ "conditions": "fIN = 1 kHz, BW = 10 kHz",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Common-mode output voltage",+ "symbol": "VCMout",+ "kind": "electrical",+ "unit": "V",+ "min": 1.39,+ "typ": 1.44,+ "max": 1.49,+ "conditions": "",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Clipping differential output voltage",+ "symbol": "VCLIPout",+ "kind": "electrical",+ "unit": "V",+ "min": -2.52,+ "typ": 2.49,+ "max": 2.52,+ "conditions": "VOUT = (VOUTP – VOUTN); |VIN| = |VINP – VINN| > |VClipping|",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Failsafe differential output voltage",+ "symbol": "VFAILSAFE",+ "kind": "electrical",+ "unit": "V",+ "min": -2.63,+ "typ": -2.57,+ "max": -2.53,+ "conditions": "VCM ≥ VCMov, or VDD1 missing",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Output bandwidth, AMC1300",+ "symbol": "BWOUT",+ "kind": "electrical",+ "unit": "kHz",+ "min": 170,+ "typ": 230,+ "max": null,+ "conditions": "AMC1300",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Output resistance",+ "symbol": "ROUT",+ "kind": "electrical",+ "unit": "Ω",+ "min": null,+ "typ": null,+ "max": 0.2,+ "conditions": "On OUTP or OUTN",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Common-mode transient immunity, AMC1300",+ "symbol": "CMTI",+ "kind": "electrical",+ "unit": "kV/µs",+ "min": 15,+ "typ": 30,+ "max": null,+ "conditions": "|GND1 – GND2| = 1 kV",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "VDD1 undervoltage detection threshold voltage",+ "symbol": "VDD1UV",+ "kind": "electrical",+ "unit": "V",+ "min": 2.4,+ "typ": 2.6,+ "max": 2.8,+ "conditions": "VDD1 falling",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "High-side supply current",+ "symbol": "IDD1",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": 7.2,+ "max": 9.8,+ "conditions": "4.5 V ≤ VDD1 ≤ 5.5 V",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Low-side supply current",+ "symbol": "IDD2",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": 5.3,+ "max": 7.2,+ "conditions": "3.0 V ≤ VDD2 ≤ 3.6 V",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Low-side supply current",+ "symbol": "IDD2",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": 5.9,+ "max": 8.1,+ "conditions": "4.5 V ≤ VDD2 ≤ 5.5 V",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Common-mode rejection ratio",+ "symbol": "CMRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -100,+ "max": null,+ "conditions": "fIN = 0 Hz, VCM min ≤ VCM ≤ VCM max",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Common-mode rejection ratio",+ "symbol": "CMRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -98,+ "max": null,+ "conditions": "fIN = 10 kHz, VCM min ≤ VCM ≤ VCM max",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Single-ended input resistance",+ "symbol": "RIN",+ "kind": "electrical",+ "unit": "kΩ",+ "min": null,+ "typ": 19,+ "max": null,+ "conditions": "INN = GND1",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Differential input resistance",+ "symbol": "RIND",+ "kind": "electrical",+ "unit": "kΩ",+ "min": null,+ "typ": 22,+ "max": null,+ "conditions": "",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Single-ended input capacitance",+ "symbol": "CIN",+ "kind": "electrical",+ "unit": "pF",+ "min": null,+ "typ": 2,+ "max": null,+ "conditions": "INN = GND1, fIN = 275 kHz",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Differential input capacitance",+ "symbol": "CIND",+ "kind": "electrical",+ "unit": "pF",+ "min": null,+ "typ": 1,+ "max": null,+ "conditions": "fIN = 275 kHz",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Nominal gain",+ "symbol": "",+ "kind": "electrical",+ "unit": "",+ "min": null,+ "typ": 8.2,+ "max": null,+ "conditions": "",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Total harmonic distortion",+ "symbol": "THD",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -85,+ "max": null,+ "conditions": "fIN = 10 kHz",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Output noise",+ "symbol": "",+ "kind": "electrical",+ "unit": "uVRMS",+ "min": null,+ "typ": 230,+ "max": null,+ "conditions": "INP = INN = GND1, fIN = 0 Hz, BW = 100 kHz brickwall filter",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Signal-to-noise ratio",+ "symbol": "SNR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": 72,+ "max": null,+ "conditions": "fIN = 10 kHz, BW = 100 kHz",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Power-supply rejection ratio vs VDD1",+ "symbol": "PSRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -103,+ "max": null,+ "conditions": "at DC",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Power-supply rejection ratio vs VDD1",+ "symbol": "PSRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -96,+ "max": null,+ "conditions": "100-mV and 10-kHz ripple",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Power-supply rejection ratio vs VDD2",+ "symbol": "PSRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -106,+ "max": null,+ "conditions": "at DC",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Power-supply rejection ratio vs VDD2",+ "symbol": "PSRR",+ "kind": "electrical",+ "unit": "dB",+ "min": null,+ "typ": -86,+ "max": null,+ "conditions": "100-mV and 10-kHz ripple",+ "source_page": 10,+ "source": "datasheet"+ },+ {+ "name": "Output short-circuit current",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": 14,+ "max": null,+ "conditions": "On OUTP or OUTN, sourcing or sinking, INN = INP = GND1, outputs shorted to either GND2 or VDD2",+ "source_page": 11,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-ambient thermal resistance",+ "symbol": "RθJA",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 85.4,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-case (top) thermal resistance",+ "symbol": "RθJC(top)",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 26.8,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board thermal resistance",+ "symbol": "RθJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 43.5,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-top characterization parameter",+ "symbol": "ψJT",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 4.8,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board characterization parameter",+ "symbol": "ψJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 41.2,+ "max": null,+ "conditions": "",+ "source_page": 7,+ "source": "datasheet"+ }+ ] } }, "variants": [],