component
AMC0311SDWVR
Public Made by Adomby adom
Texas Instruments , SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+4306
README.md+97amc0311sdwvr-etched.glbamc0311sdwvr-hero.glbamc0311sdwvr-hero.overlay.json+260amc0311sdwvr.glbamc0311sdwvr.kicad_mod+256amc0311sdwvr.kicad_sym+45amc0311sdwvr.lbr+128amc0311sdwvr.step+3026docs/amc0311sdwvr-datasheet.pdfdocs/hero.pngpackage.json+243page.json+249viewers/footprint.html+1viewers/symbol.html+1README.mdadded+97@@ -0,0 +1,97 @@+# AMC0311SDWVR++**Texas Instruments** · IC · SOIC-8++AMC0311SDWVR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD1 | power_in | High-side power supply, operating range 3V to 5.5V relative to GND1 (absolute max 6.5V); see Power Supply Recommendations for decoupling. |+| 2 | INP | input | Analog input of the amplifier; linear input range VINP - VSNSN of 0V to 2.25V. |+| 3 | SNSN | input | GND1 sense pin and inverting analog input to the amplifier; connect to GND1. |+| 4 | GND1 | power_in | High-side analog ground. |+| 5 | GND2 | power_in | Low-side analog ground. |+| 6 | REFIN | input | Reference input whose voltage is added as an offset to the output voltage; connect to a low-impedance source (0V to VDD2) or to GND2 if not used. |+| 7 | OUT | output | Single-ended analog output with fixed gain of 1V/V, supports up to 500pF capacitive load and a resistive load of at least 10kΩ to GND2. |+| 8 | VDD2 | power_in | Low-side power supply, operating range 3V to 5.5V relative to GND2 (absolute max 6.5V); see Power Supply Recommendations for decoupling. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | |+| Pins | 8 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| High-side power supply | VDD1 | 3 | 5 | 5.5 | V | VDD1 to GND1 | 4 |+| Low-side power supply | VDD2 | 3 | 3.3 | 5.5 | V | VDD2 to GND2 | 4 |+| Specified linear input voltage | VFSR | 0 | | 2.25 | V | VIN = VINP, VSNSN | 4 |+| Reference input voltage | VREFIN | 0 | | | V | REFIN to GND2 | 4 |+| Capacitive load | CLOAD | | | 500 | pF | OUT to GND2 | 4 |+| Specified ambient temperature | TA | -40 | | 125 | °C | | 4 |+| High-side power supply voltage | VDD1 | -0.3 | | 6.5 | V | VDD1 to GND1 | 4 |+| Low-side power supply voltage | VDD2 | -0.3 | | 6.5 | V | VDD2 to GND2 | 4 |+| Input current | | -10 | | 10 | mA | Continuous, any pin except power-supply pins | 4 |+| Junction temperature | TJ | | | 150 | °C | | 4 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human-body model per ANSI/ESDA/JEDEC JS-001 | 4 |+| ESD CDM | V(ESD) | -1000 | | 1000 | V | Charged-device model per ANSI/ESDA/JEDEC JS-002 | 4 |+| Input impedance | RINP | 0.05 | 2.4 | | GΩ | INP pin to GND1 | 13 |+| Input bias current | IIB, INP | -10 | 3 | 10 | nA | INP pin, INP = GND1 | 13 |+| Common-mode transient immunity | CMTI | 150 | | | V/ns | | 13 |+| REFIN DC current out of pin | IREFIN | 3.7 | 4.45 | 5.2 | µA | VREFIN = 300mV, TA = 25℃ | 13 |+| REFIN DC current out of pin | IREFIN | 3.2 | 3.85 | 4.5 | µA | VREFIN = 450mV, TA = 25℃ | 13 |+| Input offset voltage | VOS | -1 | 0.15 | 1 | mV | VOS = (VOUT, VREFIN), INP = SNSN = GND1, VREFIN = 250mV, TA = 25°C | 13 |+| Input offset thermal drift | TCVOS | -30 | 3 | 30 | µV/°C | | 13 |+| Gain error | EG | -0.25 | 0.04 | 0.25 | % | TA = 25℃ | 13 |+| Gain error drift | TCEG | -50 | 5 | 50 | ppm/°C | | 13 |+| Nonlinearity | | -0.08 | 0.002 | 0.08 | % | | 13 |+| Output bandwidth | BW | 120 | 145 | | kHz | | 13 |+| Total harmonic distortion | THD | | -83 | -73 | dB | VINP = 2VPP, VINP > 0V, fIN = 10kHz | 13 |+| Signal-to-noise ratio | SNR | 75 | 80 | | dB | VINP = 2.25VPP, fINP = 1kHz, BW = 10kHz | 13 |+| High-side supply current | IDD1 | | 4.4 | 5.6 | mA | | 13 |+| Low-side supply current | IDD2 | | 4.8 | 7.4 | mA | | 13 |+| High-side undervoltage threshold rising | VDD1UV | 2.4 | 2.6 | 2.8 | V | VDD1 rising | 13 |+| High-side undervoltage threshold falling | VDD1UV | 1.9 | 2.05 | 2.2 | V | VDD1 falling | 13 |+| Low-side undervoltage threshold rising | VDD2UV | 2.3 | 2.5 | 2.7 | V | VDD2 rising | 14 |+| Low-side undervoltage threshold falling | VDD2UV | 1.9 | 2.05 | 2.2 | V | VDD2 falling | 14 |+| VINP to VOUT signal delay (50%, 50%) | | | 2.9 | 3.2 | µs | Unfiltered output | 14 |+| Analog settling time | tAS | | 20 | 100 | µs | VDD1 step to 3.0V with VDD2 ≥ 3.0V to VOUT valid, 0.1% settling | 14 |+| Output saturation voltage | VOUT, SAT | | 150 | | mV | INP = GND1, VREFIN = 3.3V, IOUT = -1mA (sinking) | 13 |+| Input capacitance | CIN | | 2 | | pF | | 13 |+| Output resistance | ROUT | | | 0.2 | Ω | | 13 |+| Output short-circuit current | | | 11 | | mA | INP = GND1, output shorted to either GND2 or VDD2 | 13 |+| Output noise | | | 180 | | µVRMS | INP = GND1, BW = 50kHz | 13 |+| Input impedance thermal drift | TCIREFIN | | 235 | | ppm/℃ | | 13 |+| Output rise time | tr | | 2.6 | | µs | 10% to 90%, unfiltered output | 14 |+| Output fall time | tf | | 2.6 | | µs | 10% to 90%, unfiltered output | 14 |+| Junction-to-ambient thermal resistance | RθJA | | 102.8 | | °C/W | DWV (SOIC) 8 pins | 6 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 45.1 | | °C/W | DWV (SOIC) 8 pins | 6 |+| Junction-to-board thermal resistance | RθJB | | 63 | | °C/W | DWV (SOIC) 8 pins | 6 |+| Maximum power dissipation (both sides) | PD | | | 72 | mW | VDD1 = VDD2 = 5.5V | 6 |++## CAD (KiCad official)++- Symbol: `AMC0311SDWVR`+- Footprint: `Package_SO:SOIC-8_7.5x5.85mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `amc0311sdwvr-etched.step` / `amc0311sdwvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `amc0311sdwvr.step` / `amc0311sdwvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/amc0311s.pdf) (39 pp, sha256 `bf0e850ae5ce0d4f`, retrieved 2026-10-31, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/amc0311sdwvr-datasheet.pdf)
amc0311sdwvr-etched.glbadded⋯ 1 unchanged line ⋯
amc0311sdwvr-hero.glbadded⋯ 1 unchanged line ⋯
amc0311sdwvr-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "AMC0311SDWVR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 12.45,+ "dash_mm": 0.3113,+ "gap_mm": 0.1868,+ "pad_stroke_mm": 0.0747+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 2,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.996,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.75,+ 5.75,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -6.225,+ 6.225,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "amc0311sdwvr-etched.glb",+ "glb_sha256": "c2d8441854c5a3c990a218f163fa319d68f606680cee4f93b4e1ed274a55df28",+ "footprint": "amc0311sdwvr.kicad_mod",+ "footprint_sha256": "7777b11b9db34603382247b6ee1e6a9ea220eb67ad4e8f6943abd40c2d096941",+ "pins": "page.json component.pins",+ "pins_sha256": "8dd904d095b21ae94aafed01713d60f227afb2103e04e25e70a3e8001af603f2"+ },+ "generator": "adom-wiki 1.8.4 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VDD1",+ "x": -6.375,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "INP",+ "x": -6.375,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SNSN",+ "x": -6.375,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND1",+ "x": -6.375,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "GND2",+ "x": 6.375,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "REFIN",+ "x": 6.375,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "OUT",+ "x": 6.375,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VDD2",+ "x": 6.375,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -5.325,+ -1.905+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -5.325,+ -0.635+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -5.325,+ 0.635+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -5.325,+ 1.905+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 5.325,+ 1.905+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 5.325,+ 0.635+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 5.325,+ -0.635+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 5.325,+ -1.905+ ],+ "size_mm": [+ 1.8,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
amc0311sdwvr.glbadded⋯ 1 unchanged line ⋯
amc0311sdwvr.kicad_modadded+256@@ -0,0 +1,256 @@+(footprint "SOIC-8_7.5x5.85mm_P1.27mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "SOIC, 8 Pin (http://www.ti.com/lit/ml/mpds382b/mpds382b.pdf)")+ (tags "SOIC SO")+ (property "Reference" "REF**"+ (at 0 -3.88 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SOIC-8_7.5x5.85mm_P1.27mm"+ (at 0 3.88 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_rect+ (start -3.86 -3.035)+ (end 3.86 3.035)+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill no)+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -5.33 -2.47)+ (xy -5.67 -2.94)+ (xy -4.99 -2.94)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -6.48 -2.46)+ (end -4 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -6.48 2.46)+ (end -6.48 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 -3.18)+ (end 4 -3.18)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 -2.46)+ (end -4 -3.18)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 2.46)+ (end -6.48 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 3.18)+ (end -4 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 -3.18)+ (end 4 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 -2.46)+ (end 6.48 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 2.46)+ (end 4 3.18)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 3.18)+ (end -4 3.18)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.48 -2.46)+ (end 6.48 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.48 2.46)+ (end 4 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -2.75 -2.925)+ (xy 3.75 -2.925)+ (xy 3.75 2.925)+ (xy -3.75 2.925)+ (xy -3.75 -1.925)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -5.325 -1.905)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -5.325 -0.635)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -5.325 0.635)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -5.325 1.905)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at 5.325 1.905)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at 5.325 0.635)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at 5.325 -0.635)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at 5.325 -1.905)+ (size 1.8 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_7.5x5.85mm_P1.27mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
amc0311sdwvr.kicad_symadded+45@@ -0,0 +1,45 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "AMC0311SDWVR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+ (property "Value" "AMC0311SDWVR" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "AMC0311SDWVR_0_1"+ (rectangle (start -12.70 5.08) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "AMC0311SDWVR_1_1"+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "VDD1" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 0.00 0) (length 5.08)+ (name "INP" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -2.54 0) (length 5.08)+ (name "SNSN" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -5.08 0) (length 5.08)+ (name "GND1" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 2.54 180) (length 5.08)+ (name "VDD2" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 0.00 180) (length 5.08)+ (name "OUT" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "REFIN" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "GND2" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
amc0311sdwvr.lbradded+128@@ -0,0 +1,128 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="SOIC-8_7.5x5.85mm_P1.27mm">+ <description>SOIC-8, 7.5 x 5.85 mm, 1.27 mm pitch</description>+ <smd name="1" x="-5.3250" y="1.9050" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="2" x="-5.3250" y="0.6350" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="3" x="-5.3250" y="-0.6350" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="4" x="-5.3250" y="-1.9050" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="5" x="5.3250" y="-1.9050" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="6" x="5.3250" y="-0.6350" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="7" x="5.3250" y="0.6350" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="8" x="5.3250" y="1.9050" dx="1.8000" dy="0.6000" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-5.3300" y="2.4700"/>+ <vertex x="-5.6700" y="2.9400"/>+ <vertex x="-4.9900" y="2.9400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-2.7500" y="2.9250"/>+ <vertex x="3.7500" y="2.9250"/>+ <vertex x="3.7500" y="-2.9250"/>+ <vertex x="-3.7500" y="-2.9250"/>+ <vertex x="-3.7500" y="1.9250"/>+ </polygon>+ <wire x1="-3.8600" y1="3.0350" x2="3.8600" y2="3.0350" width="0.1200" layer="21"/>+ <wire x1="3.8600" y1="3.0350" x2="3.8600" y2="-3.0350" width="0.1200" layer="21"/>+ <wire x1="3.8600" y1="-3.0350" x2="-3.8600" y2="-3.0350" width="0.1200" layer="21"/>+ <wire x1="-3.8600" y1="-3.0350" x2="-3.8600" y2="3.0350" width="0.1200" layer="21"/>+ <text x="0" y="3.405" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-3.405" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="AMC0311SDWVR">+ <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+ <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="VDD1" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="INP" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="SNSN" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="GND1" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+ <pin name="VDD2" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="OUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="REFIN" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="GND2" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="AMC0311SDWVR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="AMC0311SDWVR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="SOIC-8_7.5x5.85mm_P1.27mm">+ <connects>+ <connect gate="G$1" pin="VDD1" pad="1"/>+ <connect gate="G$1" pin="INP" pad="2"/>+ <connect gate="G$1" pin="SNSN" pad="3"/>+ <connect gate="G$1" pin="GND1" pad="4"/>+ <connect gate="G$1" pin="VDD2" pad="8"/>+ <connect gate="G$1" pin="OUT" pad="7"/>+ <connect gate="G$1" pin="REFIN" pad="6"/>+ <connect gate="G$1" pin="GND2" pad="5"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
amc0311sdwvr.stepadded+3026@@ -0,0 +1,3026 @@+ISO-10303-21;+HEADER;+/* SOIC-8_7.5x5.85mm_P1.27mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of SOIC-8_7.5x5.85mm_P1.27mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'SOIC-8_7.5x5.85mm_P1.27mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('SOIC-8_7.5x5.85mm_P1.27mm','SOIC-8_7.5x5.85mm_P1.27mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#2802);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#97,#110,#129,#142,#187,#232,#245,#258,#267,#282,#346,#357,#376,#401,#419,#440,#458,#479,#497,#518,#528,#540,#561,#579,#600,#618,#639,#657,#678,#695,#710,#725,#736,#759,#805,#819,#833,#847,#893,#913,#944,#1015,#1031,#1084,#1095,#1155,#1171,#1224,#1235,#1295,#1311,#1364,#1372,#1430,#1446,#1494,#1559,#1575,#1623,#1633,#1693,#1709,#1762,#1773,#1833,#1849,#1902,#1913,#1973,#1989,#2040,#2050,#2062,#2074,#2086,#2120,#2130,#2142,#2154,#2166,#2176,#2186,#2194,#2204,#2215,#2225,#2235,#2245,#2255,#2265,#2274,#2284,#2294,#2304,#2314,#2324,#2334,#2344,#2352,#2362,#2372,#2382,#2392,#2402,#2412,#2422,#2430,#2440,#2450,#2460,#2470,#2480,#2490,#2498,#2509,#2518,#2528,#2538,#2548,#2558,#2567,#2577,#2587,#2596,#2606,#2616,#2626,#2636,#2644,#2654,#2664,#2673,#2683,#2693,#2703,#2713,#2721,#2731,#2741,#2750,#2760,#2770,#2780,#2790,#2798));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-3.499107949261,2.773215898521,0.41));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(3.499107949261,2.773215898521,0.41));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(3.575,2.925,1.49));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-3.575,2.925,1.49));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.T.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(3.598215898521,2.674107949261,0.41));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(3.598215898521,-2.674107949261,0.41));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(3.499107949261,-2.773215898521,0.41));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-3.499107949261,-2.773215898521,0.41));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-3.598215898521,-2.674107949261,0.41));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-3.598215898521,2.674107949261,0.41));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#95,#96);+#95=DIRECTION('',(0.,0.,-1.));+#96=DIRECTION('',(0.793280150789,-0.608856799555,0.));+#97=ADVANCED_FACE('',(#98),#109,.F.);+#98=FACE_BOUND('',#99,.F.);+#99=EDGE_LOOP('',(#46,#100,#105,#108));+#100=ORIENTED_EDGE('',*,*,#101,.T.);+#101=EDGE_CURVE('',#48,#102,#104,.T.);+#102=VERTEX_POINT('',#103);+#103=CARTESIAN_POINT('',(3.75,2.75,1.49));+#104=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#103),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#105=ORIENTED_EDGE('',*,*,#106,.F.);+#106=EDGE_CURVE('',#31,#102,#107,.T.);+#107=LINE('',#32,#51);+#108=ORIENTED_EDGE('',*,*,#30,.F.);+#109=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#103)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#110=ADVANCED_FACE('',(#111),#127,.F.);+#111=FACE_BOUND('',#112,.F.);+#112=EDGE_LOOP('',(#113,#114,#119,#124));+#113=ORIENTED_EDGE('',*,*,#35,.T.);+#114=ORIENTED_EDGE('',*,*,#115,.T.);+#115=EDGE_CURVE('',#31,#116,#118,.T.);+#116=VERTEX_POINT('',#117);+#117=CARTESIAN_POINT('',(3.575,2.925,1.72));+#118=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#117),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#119=ORIENTED_EDGE('',*,*,#120,.F.);+#120=EDGE_CURVE('',#121,#116,#123,.T.);+#121=VERTEX_POINT('',#122);+#122=CARTESIAN_POINT('',(-3.575,2.925,1.72));+#123=LINE('',#122,#27);+#124=ORIENTED_EDGE('',*,*,#125,.F.);+#125=EDGE_CURVE('',#36,#121,#126,.T.);+#126=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#122),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#127=PLANE('',#128);+#128=AXIS2_PLACEMENT_3D('',#122,#59,#28);+#129=ADVANCED_FACE('',(#130),#141,.F.);+#130=FACE_BOUND('',#131,.F.);+#131=EDGE_LOOP('',(#88,#132,#133,#138));+#132=ORIENTED_EDGE('',*,*,#40,.T.);+#133=ORIENTED_EDGE('',*,*,#134,.F.);+#134=EDGE_CURVE('',#135,#36,#137,.T.);+#135=VERTEX_POINT('',#136);+#136=CARTESIAN_POINT('',(-3.75,2.75,1.49));+#137=LINE('',#136,#91);+#138=ORIENTED_EDGE('',*,*,#139,.F.);+#139=EDGE_CURVE('',#83,#135,#140,.T.);+#140=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#136),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#136),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#142=ADVANCED_FACE('',(#143),#186,.F.);+#143=FACE_BOUND('',#144,.F.);+#144=EDGE_LOOP('',(#81,#145,#146,#152,#156,#160,#164,#168,#172,#176,#180,#183));+#145=ORIENTED_EDGE('',*,*,#139,.T.);+#146=ORIENTED_EDGE('',*,*,#147,.F.);+#147=EDGE_CURVE('',#148,#135,#150,.T.);+#148=VERTEX_POINT('',#149);+#149=CARTESIAN_POINT('',(-3.75,2.11,1.49));+#150=LINE('',#151,#86);+#151=CARTESIAN_POINT('',(-3.75,-2.75,1.49));+#152=ORIENTED_EDGE('',*,*,#153,.F.);+#153=EDGE_CURVE('',#154,#148,#150,.T.);+#154=VERTEX_POINT('',#155);+#155=CARTESIAN_POINT('',(-3.75,1.7,1.49));+#156=ORIENTED_EDGE('',*,*,#157,.F.);+#157=EDGE_CURVE('',#158,#154,#150,.T.);+#158=VERTEX_POINT('',#159);+#159=CARTESIAN_POINT('',(-3.75,0.84,1.49));+#160=ORIENTED_EDGE('',*,*,#161,.F.);+#161=EDGE_CURVE('',#162,#158,#150,.T.);+#162=VERTEX_POINT('',#163);+#163=CARTESIAN_POINT('',(-3.75,0.43,1.49));+#164=ORIENTED_EDGE('',*,*,#165,.F.);+#165=EDGE_CURVE('',#166,#162,#150,.T.);+#166=VERTEX_POINT('',#167);+#167=CARTESIAN_POINT('',(-3.75,-0.43,1.49));+#168=ORIENTED_EDGE('',*,*,#169,.F.);+#169=EDGE_CURVE('',#170,#166,#150,.T.);+#170=VERTEX_POINT('',#171);+#171=CARTESIAN_POINT('',(-3.75,-0.84,1.49));+#172=ORIENTED_EDGE('',*,*,#173,.F.);+#173=EDGE_CURVE('',#174,#170,#150,.T.);+#174=VERTEX_POINT('',#175);+#175=CARTESIAN_POINT('',(-3.75,-1.7,1.49));+#176=ORIENTED_EDGE('',*,*,#177,.F.);+#177=EDGE_CURVE('',#178,#174,#150,.T.);+#178=VERTEX_POINT('',#179);+#179=CARTESIAN_POINT('',(-3.75,-2.11,1.49));+#180=ORIENTED_EDGE('',*,*,#181,.F.);+#181=EDGE_CURVE('',#182,#178,#150,.T.);+#182=VERTEX_POINT('',#151);+#183=ORIENTED_EDGE('',*,*,#184,.F.);+#184=EDGE_CURVE('',#76,#182,#185,.T.);+#185=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#151),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#186=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#151),(#84,#136)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#187=ADVANCED_FACE('',(#188),#231,.F.);+#188=FACE_BOUND('',#189,.F.);+#189=EDGE_LOOP('',(#53,#190,#195,#200,#204,#208,#212,#216,#220,#224,#228,#230));+#190=ORIENTED_EDGE('',*,*,#191,.T.);+#191=EDGE_CURVE('',#55,#192,#194,.T.);+#192=VERTEX_POINT('',#193);+#193=CARTESIAN_POINT('',(3.75,-2.75,1.49));+#194=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#193),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#195=ORIENTED_EDGE('',*,*,#196,.F.);+#196=EDGE_CURVE('',#197,#192,#199,.T.);+#197=VERTEX_POINT('',#198);+#198=CARTESIAN_POINT('',(3.75,-2.11,1.49));+#199=LINE('',#103,#58);+#200=ORIENTED_EDGE('',*,*,#201,.F.);+#201=EDGE_CURVE('',#202,#197,#199,.T.);+#202=VERTEX_POINT('',#203);+#203=CARTESIAN_POINT('',(3.75,-1.7,1.49));+#204=ORIENTED_EDGE('',*,*,#205,.F.);+#205=EDGE_CURVE('',#206,#202,#199,.T.);+#206=VERTEX_POINT('',#207);+#207=CARTESIAN_POINT('',(3.75,-0.84,1.49));+#208=ORIENTED_EDGE('',*,*,#209,.F.);+#209=EDGE_CURVE('',#210,#206,#199,.T.);+#210=VERTEX_POINT('',#211);+#211=CARTESIAN_POINT('',(3.75,-0.43,1.49));+#212=ORIENTED_EDGE('',*,*,#213,.F.);+#213=EDGE_CURVE('',#214,#210,#199,.T.);+#214=VERTEX_POINT('',#215);+#215=CARTESIAN_POINT('',(3.75,0.43,1.49));+#216=ORIENTED_EDGE('',*,*,#217,.F.);+#217=EDGE_CURVE('',#218,#214,#199,.T.);+#218=VERTEX_POINT('',#219);+#219=CARTESIAN_POINT('',(3.75,0.84,1.49));+#220=ORIENTED_EDGE('',*,*,#221,.F.);+#221=EDGE_CURVE('',#222,#218,#199,.T.);+#222=VERTEX_POINT('',#223);+#223=CARTESIAN_POINT('',(3.75,1.7,1.49));+#224=ORIENTED_EDGE('',*,*,#225,.F.);+#225=EDGE_CURVE('',#226,#222,#199,.T.);+#226=VERTEX_POINT('',#227);+#227=CARTESIAN_POINT('',(3.75,2.11,1.49));+#228=ORIENTED_EDGE('',*,*,#229,.F.);+#229=EDGE_CURVE('',#102,#226,#199,.T.);+#230=ORIENTED_EDGE('',*,*,#101,.F.);+#231=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#103),(#56,#193)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#232=ADVANCED_FACE('',(#233),#244,.F.);+#233=FACE_BOUND('',#234,.F.);+#234=EDGE_LOOP('',(#74,#235,#236,#241));+#235=ORIENTED_EDGE('',*,*,#184,.T.);+#236=ORIENTED_EDGE('',*,*,#237,.F.);+#237=EDGE_CURVE('',#238,#182,#240,.T.);+#238=VERTEX_POINT('',#239);+#239=CARTESIAN_POINT('',(-3.575,-2.925,1.49));+#240=LINE('',#239,#79);+#241=ORIENTED_EDGE('',*,*,#242,.F.);+#242=EDGE_CURVE('',#69,#238,#243,.T.);+#243=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#239),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#244=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#239),(#77,#151)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#245=ADVANCED_FACE('',(#246),#257,.F.);+#246=FACE_BOUND('',#247,.F.);+#247=EDGE_LOOP('',(#60,#248,#253,#256));+#248=ORIENTED_EDGE('',*,*,#249,.T.);+#249=EDGE_CURVE('',#62,#250,#252,.T.);+#250=VERTEX_POINT('',#251);+#251=CARTESIAN_POINT('',(3.575,-2.925,1.49));+#252=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#251),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#253=ORIENTED_EDGE('',*,*,#254,.F.);+#254=EDGE_CURVE('',#192,#250,#255,.T.);+#255=LINE('',#193,#65);+#256=ORIENTED_EDGE('',*,*,#191,.F.);+#257=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#193),(#63,#251)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#258=ADVANCED_FACE('',(#259),#266,.F.);+#259=FACE_BOUND('',#260,.F.);+#260=EDGE_LOOP('',(#67,#261,#262,#265));+#261=ORIENTED_EDGE('',*,*,#242,.T.);+#262=ORIENTED_EDGE('',*,*,#263,.F.);+#263=EDGE_CURVE('',#250,#238,#264,.T.);+#264=LINE('',#251,#72);+#265=ORIENTED_EDGE('',*,*,#249,.F.);+#266=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#251),(#70,#239)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#267=ADVANCED_FACE('',(#268),#280,.F.);+#268=FACE_BOUND('',#269,.F.);+#269=EDGE_LOOP('',(#270,#271,#276,#279));+#270=ORIENTED_EDGE('',*,*,#106,.T.);+#271=ORIENTED_EDGE('',*,*,#272,.T.);+#272=EDGE_CURVE('',#102,#273,#275,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(3.75,2.75,1.72));+#275=B_SPLINE_CURVE_WITH_KNOTS('',1,(#103,#274),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#276=ORIENTED_EDGE('',*,*,#277,.F.);+#277=EDGE_CURVE('',#116,#273,#278,.T.);+#278=LINE('',#117,#51);+#279=ORIENTED_EDGE('',*,*,#115,.F.);+#280=PLANE('',#281);+#281=AXIS2_PLACEMENT_3D('',#117,#66,#52);+#282=ADVANCED_FACE('',(#283),#341,.F.);+#283=FACE_BOUND('',#284,.F.);+#284=EDGE_LOOP('',(#285,#290,#291,#292,#297,#303,#308,#313,#318,#323,#329,#337));+#285=ORIENTED_EDGE('',*,*,#286,.T.);+#286=EDGE_CURVE('',#287,#121,#289,.T.);+#287=VERTEX_POINT('',#288);+#288=CARTESIAN_POINT('',(-3.75,2.75,1.72));+#289=LINE('',#288,#91);+#290=ORIENTED_EDGE('',*,*,#120,.T.);+#291=ORIENTED_EDGE('',*,*,#277,.T.);+#292=ORIENTED_EDGE('',*,*,#293,.T.);+#293=EDGE_CURVE('',#273,#294,#296,.T.);+#294=VERTEX_POINT('',#295);+#295=CARTESIAN_POINT('',(3.75,2.11,1.72));+#296=LINE('',#274,#58);+#297=ORIENTED_EDGE('',*,*,#298,.T.);+#298=EDGE_CURVE('',#294,#299,#301,.T.);+#299=VERTEX_POINT('',#300);+#300=CARTESIAN_POINT('',(3.675,2.11,1.72));+#301=LINE('',#302,#72);+#302=CARTESIAN_POINT('',(4.05,2.11,1.72));+#303=ORIENTED_EDGE('',*,*,#304,.F.);+#304=EDGE_CURVE('',#305,#299,#307,.T.);+#305=VERTEX_POINT('',#306);+#306=CARTESIAN_POINT('',(3.675,2.7125,1.72));+#307=LINE('',#306,#58);+#308=ORIENTED_EDGE('',*,*,#309,.F.);+#309=EDGE_CURVE('',#310,#305,#312,.T.);+#310=VERTEX_POINT('',#311);+#311=CARTESIAN_POINT('',(3.5375,2.85,1.72));+#312=LINE('',#311,#51);+#313=ORIENTED_EDGE('',*,*,#314,.F.);+#314=EDGE_CURVE('',#315,#310,#317,.T.);+#315=VERTEX_POINT('',#316);+#316=CARTESIAN_POINT('',(-3.5375,2.85,1.72));+#317=LINE('',#316,#27);+#318=ORIENTED_EDGE('',*,*,#319,.F.);+#319=EDGE_CURVE('',#320,#315,#322,.T.);+#320=VERTEX_POINT('',#321);+#321=CARTESIAN_POINT('',(-3.675,2.7125,1.72));+#322=LINE('',#321,#91);+#323=ORIENTED_EDGE('',*,*,#324,.F.);+#324=EDGE_CURVE('',#325,#320,#327,.T.);+#325=VERTEX_POINT('',#326);+#326=CARTESIAN_POINT('',(-3.675,2.11,1.72));+#327=LINE('',#328,#86);+#328=CARTESIAN_POINT('',(-3.675,-2.7125,1.72));+#329=ORIENTED_EDGE('',*,*,#330,.F.);+#330=EDGE_CURVE('',#331,#325,#333,.T.);+#331=VERTEX_POINT('',#332);+#332=CARTESIAN_POINT('',(-3.75,2.11,1.72));+#333=LINE('',#334,#335);+#334=CARTESIAN_POINT('',(-4.05,2.11,1.72));+#335=VECTOR('',#336,1.);+#336=DIRECTION('',(1.,-1.144237745222E-17,0.));+#337=ORIENTED_EDGE('',*,*,#338,.T.);+#338=EDGE_CURVE('',#331,#287,#339,.T.);+#339=LINE('',#340,#86);+#340=CARTESIAN_POINT('',(-3.75,-2.75,1.72));+#341=PLANE('',#342);+#342=AXIS2_PLACEMENT_3D('',#343,#344,#345);+#343=CARTESIAN_POINT('',(-1.517495954423E-16,2.8875,1.72));+#344=DIRECTION('',(-5.160095535888E-19,-7.403266100724E-28,-1.));+#345=DIRECTION('',(1.,1.110676510509E-16,-5.160095535888E-19));+#346=ADVANCED_FACE('',(#347),#355,.F.);+#347=FACE_BOUND('',#348,.F.);+#348=EDGE_LOOP('',(#349,#350,#351,#352));+#349=ORIENTED_EDGE('',*,*,#134,.T.);+#350=ORIENTED_EDGE('',*,*,#125,.T.);+#351=ORIENTED_EDGE('',*,*,#286,.F.);+#352=ORIENTED_EDGE('',*,*,#353,.F.);+#353=EDGE_CURVE('',#135,#287,#354,.T.);+#354=B_SPLINE_CURVE_WITH_KNOTS('',1,(#136,#288),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#355=PLANE('',#356);+#356=AXIS2_PLACEMENT_3D('',#288,#52,#92);+#357=ADVANCED_FACE('',(#358),#374,.F.);+#358=FACE_BOUND('',#359,.F.);+#359=EDGE_LOOP('',(#360,#364,#365,#372));+#360=ORIENTED_EDGE('',*,*,#361,.F.);+#361=EDGE_CURVE('',#182,#362,#363,.T.);+#362=VERTEX_POINT('',#340);+#363=B_SPLINE_CURVE_WITH_KNOTS('',1,(#151,#340),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#364=ORIENTED_EDGE('',*,*,#181,.T.);+#365=ORIENTED_EDGE('',*,*,#366,.T.);+#366=EDGE_CURVE('',#178,#367,#369,.T.);+#367=VERTEX_POINT('',#368);+#368=CARTESIAN_POINT('',(-3.75,-2.11,1.72));+#369=LINE('',#370,#371);+#370=CARTESIAN_POINT('',(-3.75,-2.11,1.222795923187));+#371=VECTOR('',#13,1.);+#372=ORIENTED_EDGE('',*,*,#373,.F.);+#373=EDGE_CURVE('',#362,#367,#339,.T.);+#374=PLANE('',#375);+#375=AXIS2_PLACEMENT_3D('',#340,#28,#87);+#376=ADVANCED_FACE('',(#377),#399,.F.);+#377=FACE_BOUND('',#378,.F.);+#378=EDGE_LOOP('',(#379,#387,#388,#394));+#379=ORIENTED_EDGE('',*,*,#380,.F.);+#380=EDGE_CURVE('',#178,#381,#383,.T.);+#381=VERTEX_POINT('',#382);+#382=CARTESIAN_POINT('',(-4.05,-2.11,1.49));+#383=LINE('',#384,#385);+#384=CARTESIAN_POINT('',(-3.6,-2.11,1.49));+#385=VECTOR('',#386,1.);+#386=DIRECTION('',(-1.,1.144237745222E-17,0.));+#387=ORIENTED_EDGE('',*,*,#177,.T.);+#388=ORIENTED_EDGE('',*,*,#389,.T.);+#389=EDGE_CURVE('',#174,#390,#392,.T.);+#390=VERTEX_POINT('',#391);+#391=CARTESIAN_POINT('',(-4.05,-1.7,1.49));+#392=LINE('',#393,#385);+#393=CARTESIAN_POINT('',(-3.6,-1.7,1.49));+#394=ORIENTED_EDGE('',*,*,#395,.F.);+#395=EDGE_CURVE('',#381,#390,#396,.T.);+#396=LINE('',#382,#397);+#397=VECTOR('',#398,1.);+#398=DIRECTION('',(1.144237745222E-17,1.,0.));+#399=PLANE('',#400);+#400=AXIS2_PLACEMENT_3D('',#384,#13,#386);+#401=ADVANCED_FACE('',(#402),#374,.F.);+#402=FACE_BOUND('',#403,.F.);+#403=EDGE_LOOP('',(#404,#410,#411,#417));+#404=ORIENTED_EDGE('',*,*,#405,.F.);+#405=EDGE_CURVE('',#174,#406,#408,.T.);+#406=VERTEX_POINT('',#407);+#407=CARTESIAN_POINT('',(-3.75,-1.7,1.72));+#408=LINE('',#409,#371);+#409=CARTESIAN_POINT('',(-3.75,-1.7,1.222795923187));+#410=ORIENTED_EDGE('',*,*,#173,.T.);+#411=ORIENTED_EDGE('',*,*,#412,.T.);+#412=EDGE_CURVE('',#170,#413,#415,.T.);+#413=VERTEX_POINT('',#414);+#414=CARTESIAN_POINT('',(-3.75,-0.84,1.72));+#415=LINE('',#416,#371);+#416=CARTESIAN_POINT('',(-3.75,-0.84,1.222795923187));+#417=ORIENTED_EDGE('',*,*,#418,.F.);+#418=EDGE_CURVE('',#406,#413,#339,.T.);+#419=ADVANCED_FACE('',(#420),#438,.F.);+#420=FACE_BOUND('',#421,.F.);+#421=EDGE_LOOP('',(#422,#428,#429,#435));+#422=ORIENTED_EDGE('',*,*,#423,.F.);+#423=EDGE_CURVE('',#170,#424,#426,.T.);+#424=VERTEX_POINT('',#425);+#425=CARTESIAN_POINT('',(-4.05,-0.84,1.49));+#426=LINE('',#427,#385);+#427=CARTESIAN_POINT('',(-3.6,-0.84,1.49));+#428=ORIENTED_EDGE('',*,*,#169,.T.);+#429=ORIENTED_EDGE('',*,*,#430,.T.);+#430=EDGE_CURVE('',#166,#431,#433,.T.);+#431=VERTEX_POINT('',#432);+#432=CARTESIAN_POINT('',(-4.05,-0.43,1.49));+#433=LINE('',#434,#385);+#434=CARTESIAN_POINT('',(-3.6,-0.43,1.49));+#435=ORIENTED_EDGE('',*,*,#436,.F.);+#436=EDGE_CURVE('',#424,#431,#437,.T.);+#437=LINE('',#425,#397);+#438=PLANE('',#439);+#439=AXIS2_PLACEMENT_3D('',#427,#13,#386);+#440=ADVANCED_FACE('',(#441),#374,.F.);+#441=FACE_BOUND('',#442,.F.);+#442=EDGE_LOOP('',(#443,#449,#450,#456));+#443=ORIENTED_EDGE('',*,*,#444,.F.);+#444=EDGE_CURVE('',#166,#445,#447,.T.);+#445=VERTEX_POINT('',#446);+#446=CARTESIAN_POINT('',(-3.75,-0.43,1.72));+#447=LINE('',#448,#371);+#448=CARTESIAN_POINT('',(-3.75,-0.43,1.222795923187));+#449=ORIENTED_EDGE('',*,*,#165,.T.);+#450=ORIENTED_EDGE('',*,*,#451,.T.);+#451=EDGE_CURVE('',#162,#452,#454,.T.);+#452=VERTEX_POINT('',#453);+#453=CARTESIAN_POINT('',(-3.75,0.43,1.72));+#454=LINE('',#455,#371);+#455=CARTESIAN_POINT('',(-3.75,0.43,1.222795923187));+#456=ORIENTED_EDGE('',*,*,#457,.F.);+#457=EDGE_CURVE('',#445,#452,#339,.T.);+#458=ADVANCED_FACE('',(#459),#477,.F.);+#459=FACE_BOUND('',#460,.F.);+#460=EDGE_LOOP('',(#461,#467,#468,#474));+#461=ORIENTED_EDGE('',*,*,#462,.F.);+#462=EDGE_CURVE('',#162,#463,#465,.T.);+#463=VERTEX_POINT('',#464);+#464=CARTESIAN_POINT('',(-4.05,0.43,1.49));+#465=LINE('',#466,#385);+#466=CARTESIAN_POINT('',(-3.6,0.43,1.49));+#467=ORIENTED_EDGE('',*,*,#161,.T.);+#468=ORIENTED_EDGE('',*,*,#469,.T.);+#469=EDGE_CURVE('',#158,#470,#472,.T.);+#470=VERTEX_POINT('',#471);+#471=CARTESIAN_POINT('',(-4.05,0.84,1.49));+#472=LINE('',#473,#385);+#473=CARTESIAN_POINT('',(-3.6,0.84,1.49));+#474=ORIENTED_EDGE('',*,*,#475,.F.);+#475=EDGE_CURVE('',#463,#470,#476,.T.);+#476=LINE('',#464,#397);+#477=PLANE('',#478);+#478=AXIS2_PLACEMENT_3D('',#466,#13,#386);+#479=ADVANCED_FACE('',(#480),#374,.F.);+#480=FACE_BOUND('',#481,.F.);+#481=EDGE_LOOP('',(#482,#488,#489,#495));+#482=ORIENTED_EDGE('',*,*,#483,.F.);+#483=EDGE_CURVE('',#158,#484,#486,.T.);+#484=VERTEX_POINT('',#485);+#485=CARTESIAN_POINT('',(-3.75,0.84,1.72));+#486=LINE('',#487,#371);+#487=CARTESIAN_POINT('',(-3.75,0.84,1.222795923187));+#488=ORIENTED_EDGE('',*,*,#157,.T.);+#489=ORIENTED_EDGE('',*,*,#490,.T.);+#490=EDGE_CURVE('',#154,#491,#493,.T.);+#491=VERTEX_POINT('',#492);+#492=CARTESIAN_POINT('',(-3.75,1.7,1.72));+#493=LINE('',#494,#371);+#494=CARTESIAN_POINT('',(-3.75,1.7,1.222795923187));+#495=ORIENTED_EDGE('',*,*,#496,.F.);+#496=EDGE_CURVE('',#484,#491,#339,.T.);+#497=ADVANCED_FACE('',(#498),#516,.F.);+#498=FACE_BOUND('',#499,.F.);+#499=EDGE_LOOP('',(#500,#506,#507,#513));+#500=ORIENTED_EDGE('',*,*,#501,.F.);+#501=EDGE_CURVE('',#154,#502,#504,.T.);+#502=VERTEX_POINT('',#503);+#503=CARTESIAN_POINT('',(-4.05,1.7,1.49));+#504=LINE('',#505,#385);+#505=CARTESIAN_POINT('',(-3.6,1.7,1.49));+#506=ORIENTED_EDGE('',*,*,#153,.T.);+#507=ORIENTED_EDGE('',*,*,#508,.T.);+#508=EDGE_CURVE('',#148,#509,#511,.T.);+#509=VERTEX_POINT('',#510);+#510=CARTESIAN_POINT('',(-4.05,2.11,1.49));+#511=LINE('',#512,#385);+#512=CARTESIAN_POINT('',(-3.6,2.11,1.49));+#513=ORIENTED_EDGE('',*,*,#514,.F.);+#514=EDGE_CURVE('',#502,#509,#515,.T.);+#515=LINE('',#503,#397);+#516=PLANE('',#517);+#517=AXIS2_PLACEMENT_3D('',#505,#13,#386);+#518=ADVANCED_FACE('',(#519),#374,.F.);+#519=FACE_BOUND('',#520,.F.);+#520=EDGE_LOOP('',(#521,#525,#526,#527));+#521=ORIENTED_EDGE('',*,*,#522,.F.);+#522=EDGE_CURVE('',#148,#331,#523,.T.);+#523=LINE('',#524,#371);+#524=CARTESIAN_POINT('',(-3.75,2.11,1.222795923187));+#525=ORIENTED_EDGE('',*,*,#147,.T.);+#526=ORIENTED_EDGE('',*,*,#353,.T.);+#527=ORIENTED_EDGE('',*,*,#338,.F.);+#528=ADVANCED_FACE('',(#529),#538,.F.);+#529=FACE_BOUND('',#530,.F.);+#530=EDGE_LOOP('',(#531,#532,#533,#537));+#531=ORIENTED_EDGE('',*,*,#272,.F.);+#532=ORIENTED_EDGE('',*,*,#229,.T.);+#533=ORIENTED_EDGE('',*,*,#534,.T.);+#534=EDGE_CURVE('',#226,#294,#535,.T.);+#535=LINE('',#536,#371);+#536=CARTESIAN_POINT('',(3.75,2.11,1.222795923187));+#537=ORIENTED_EDGE('',*,*,#293,.F.);+#538=PLANE('',#539);+#539=AXIS2_PLACEMENT_3D('',#274,#73,#59);+#540=ADVANCED_FACE('',(#541),#559,.F.);+#541=FACE_BOUND('',#542,.F.);+#542=EDGE_LOOP('',(#543,#549,#550,#556));+#543=ORIENTED_EDGE('',*,*,#544,.F.);+#544=EDGE_CURVE('',#226,#545,#547,.T.);+#545=VERTEX_POINT('',#546);+#546=CARTESIAN_POINT('',(4.05,2.11,1.49));+#547=LINE('',#548,#27);+#548=CARTESIAN_POINT('',(3.6,2.11,1.49));+#549=ORIENTED_EDGE('',*,*,#225,.T.);+#550=ORIENTED_EDGE('',*,*,#551,.T.);+#551=EDGE_CURVE('',#222,#552,#554,.T.);+#552=VERTEX_POINT('',#553);+#553=CARTESIAN_POINT('',(4.05,1.7,1.49));+#554=LINE('',#555,#27);+#555=CARTESIAN_POINT('',(3.6,1.7,1.49));+#556=ORIENTED_EDGE('',*,*,#557,.F.);+#557=EDGE_CURVE('',#545,#552,#558,.T.);+#558=LINE('',#546,#58);+#559=PLANE('',#560);+#560=AXIS2_PLACEMENT_3D('',#548,#13,#28);+#561=ADVANCED_FACE('',(#562),#538,.F.);+#562=FACE_BOUND('',#563,.F.);+#563=EDGE_LOOP('',(#564,#570,#571,#577));+#564=ORIENTED_EDGE('',*,*,#565,.F.);+#565=EDGE_CURVE('',#222,#566,#568,.T.);+#566=VERTEX_POINT('',#567);+#567=CARTESIAN_POINT('',(3.75,1.7,1.72));+#568=LINE('',#569,#371);+#569=CARTESIAN_POINT('',(3.75,1.7,1.222795923187));+#570=ORIENTED_EDGE('',*,*,#221,.T.);+#571=ORIENTED_EDGE('',*,*,#572,.T.);+#572=EDGE_CURVE('',#218,#573,#575,.T.);+#573=VERTEX_POINT('',#574);+#574=CARTESIAN_POINT('',(3.75,0.84,1.72));+#575=LINE('',#576,#371);+#576=CARTESIAN_POINT('',(3.75,0.84,1.222795923187));+#577=ORIENTED_EDGE('',*,*,#578,.F.);+#578=EDGE_CURVE('',#566,#573,#296,.T.);+#579=ADVANCED_FACE('',(#580),#598,.F.);+#580=FACE_BOUND('',#581,.F.);+#581=EDGE_LOOP('',(#582,#588,#589,#595));+#582=ORIENTED_EDGE('',*,*,#583,.F.);+#583=EDGE_CURVE('',#218,#584,#586,.T.);+#584=VERTEX_POINT('',#585);+#585=CARTESIAN_POINT('',(4.05,0.84,1.49));+#586=LINE('',#587,#27);+#587=CARTESIAN_POINT('',(3.6,0.84,1.49));+#588=ORIENTED_EDGE('',*,*,#217,.T.);+#589=ORIENTED_EDGE('',*,*,#590,.T.);+#590=EDGE_CURVE('',#214,#591,#593,.T.);+#591=VERTEX_POINT('',#592);+#592=CARTESIAN_POINT('',(4.05,0.43,1.49));+#593=LINE('',#594,#27);+#594=CARTESIAN_POINT('',(3.6,0.43,1.49));+#595=ORIENTED_EDGE('',*,*,#596,.F.);+#596=EDGE_CURVE('',#584,#591,#597,.T.);+#597=LINE('',#585,#58);+#598=PLANE('',#599);+#599=AXIS2_PLACEMENT_3D('',#587,#13,#28);+#600=ADVANCED_FACE('',(#601),#538,.F.);+#601=FACE_BOUND('',#602,.F.);+#602=EDGE_LOOP('',(#603,#609,#610,#616));+#603=ORIENTED_EDGE('',*,*,#604,.F.);+#604=EDGE_CURVE('',#214,#605,#607,.T.);+#605=VERTEX_POINT('',#606);+#606=CARTESIAN_POINT('',(3.75,0.43,1.72));+#607=LINE('',#608,#371);+#608=CARTESIAN_POINT('',(3.75,0.43,1.222795923187));+#609=ORIENTED_EDGE('',*,*,#213,.T.);+#610=ORIENTED_EDGE('',*,*,#611,.T.);+#611=EDGE_CURVE('',#210,#612,#614,.T.);+#612=VERTEX_POINT('',#613);+#613=CARTESIAN_POINT('',(3.75,-0.43,1.72));+#614=LINE('',#615,#371);+#615=CARTESIAN_POINT('',(3.75,-0.43,1.222795923187));+#616=ORIENTED_EDGE('',*,*,#617,.F.);+#617=EDGE_CURVE('',#605,#612,#296,.T.);+#618=ADVANCED_FACE('',(#619),#637,.F.);+#619=FACE_BOUND('',#620,.F.);+#620=EDGE_LOOP('',(#621,#627,#628,#634));+#621=ORIENTED_EDGE('',*,*,#622,.F.);+#622=EDGE_CURVE('',#210,#623,#625,.T.);+#623=VERTEX_POINT('',#624);+#624=CARTESIAN_POINT('',(4.05,-0.43,1.49));+#625=LINE('',#626,#27);+#626=CARTESIAN_POINT('',(3.6,-0.43,1.49));+#627=ORIENTED_EDGE('',*,*,#209,.T.);+#628=ORIENTED_EDGE('',*,*,#629,.T.);+#629=EDGE_CURVE('',#206,#630,#632,.T.);+#630=VERTEX_POINT('',#631);+#631=CARTESIAN_POINT('',(4.05,-0.84,1.49));+#632=LINE('',#633,#27);+#633=CARTESIAN_POINT('',(3.6,-0.84,1.49));+#634=ORIENTED_EDGE('',*,*,#635,.F.);+#635=EDGE_CURVE('',#623,#630,#636,.T.);+#636=LINE('',#624,#58);+#637=PLANE('',#638);+#638=AXIS2_PLACEMENT_3D('',#626,#13,#28);+#639=ADVANCED_FACE('',(#640),#538,.F.);+#640=FACE_BOUND('',#641,.F.);+#641=EDGE_LOOP('',(#642,#648,#649,#655));+#642=ORIENTED_EDGE('',*,*,#643,.F.);+#643=EDGE_CURVE('',#206,#644,#646,.T.);+#644=VERTEX_POINT('',#645);+#645=CARTESIAN_POINT('',(3.75,-0.84,1.72));+#646=LINE('',#647,#371);+#647=CARTESIAN_POINT('',(3.75,-0.84,1.222795923187));+#648=ORIENTED_EDGE('',*,*,#205,.T.);+#649=ORIENTED_EDGE('',*,*,#650,.T.);+#650=EDGE_CURVE('',#202,#651,#653,.T.);+#651=VERTEX_POINT('',#652);+#652=CARTESIAN_POINT('',(3.75,-1.7,1.72));+#653=LINE('',#654,#371);+#654=CARTESIAN_POINT('',(3.75,-1.7,1.222795923187));+#655=ORIENTED_EDGE('',*,*,#656,.F.);+#656=EDGE_CURVE('',#644,#651,#296,.T.);+#657=ADVANCED_FACE('',(#658),#676,.F.);+#658=FACE_BOUND('',#659,.F.);+#659=EDGE_LOOP('',(#660,#666,#667,#673));+#660=ORIENTED_EDGE('',*,*,#661,.F.);+#661=EDGE_CURVE('',#202,#662,#664,.T.);+#662=VERTEX_POINT('',#663);+#663=CARTESIAN_POINT('',(4.05,-1.7,1.49));+#664=LINE('',#665,#27);+#665=CARTESIAN_POINT('',(3.6,-1.7,1.49));+#666=ORIENTED_EDGE('',*,*,#201,.T.);+#667=ORIENTED_EDGE('',*,*,#668,.T.);+#668=EDGE_CURVE('',#197,#669,#671,.T.);+#669=VERTEX_POINT('',#670);+#670=CARTESIAN_POINT('',(4.05,-2.11,1.49));+#671=LINE('',#672,#27);+#672=CARTESIAN_POINT('',(3.6,-2.11,1.49));+#673=ORIENTED_EDGE('',*,*,#674,.F.);+#674=EDGE_CURVE('',#662,#669,#675,.T.);+#675=LINE('',#663,#58);+#676=PLANE('',#677);+#677=AXIS2_PLACEMENT_3D('',#665,#13,#28);+#678=ADVANCED_FACE('',(#679),#538,.F.);+#679=FACE_BOUND('',#680,.F.);+#680=EDGE_LOOP('',(#681,#687,#688,#693));+#681=ORIENTED_EDGE('',*,*,#682,.F.);+#682=EDGE_CURVE('',#197,#683,#685,.T.);+#683=VERTEX_POINT('',#684);+#684=CARTESIAN_POINT('',(3.75,-2.11,1.72));+#685=LINE('',#686,#371);+#686=CARTESIAN_POINT('',(3.75,-2.11,1.222795923187));+#687=ORIENTED_EDGE('',*,*,#196,.T.);+#688=ORIENTED_EDGE('',*,*,#689,.T.);+#689=EDGE_CURVE('',#192,#690,#692,.T.);+#690=VERTEX_POINT('',#691);+#691=CARTESIAN_POINT('',(3.75,-2.75,1.72));+#692=B_SPLINE_CURVE_WITH_KNOTS('',1,(#193,#691),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#693=ORIENTED_EDGE('',*,*,#694,.F.);+#694=EDGE_CURVE('',#683,#690,#296,.T.);+#695=ADVANCED_FACE('',(#696),#708,.F.);+#696=FACE_BOUND('',#697,.F.);+#697=EDGE_LOOP('',(#698,#699,#700,#705));+#698=ORIENTED_EDGE('',*,*,#237,.T.);+#699=ORIENTED_EDGE('',*,*,#361,.T.);+#700=ORIENTED_EDGE('',*,*,#701,.F.);+#701=EDGE_CURVE('',#702,#362,#704,.T.);+#702=VERTEX_POINT('',#703);+#703=CARTESIAN_POINT('',(-3.575,-2.925,1.72));+#704=LINE('',#703,#79);+#705=ORIENTED_EDGE('',*,*,#706,.F.);+#706=EDGE_CURVE('',#238,#702,#707,.T.);+#707=B_SPLINE_CURVE_WITH_KNOTS('',1,(#239,#703),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#708=PLANE('',#709);+#709=AXIS2_PLACEMENT_3D('',#703,#92,#80);+#710=ADVANCED_FACE('',(#711),#723,.F.);+#711=FACE_BOUND('',#712,.F.);+#712=EDGE_LOOP('',(#713,#714,#719,#722));+#713=ORIENTED_EDGE('',*,*,#254,.T.);+#714=ORIENTED_EDGE('',*,*,#715,.T.);+#715=EDGE_CURVE('',#250,#716,#718,.T.);+#716=VERTEX_POINT('',#717);+#717=CARTESIAN_POINT('',(3.575,-2.925,1.72));+#718=B_SPLINE_CURVE_WITH_KNOTS('',1,(#251,#717),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#719=ORIENTED_EDGE('',*,*,#720,.F.);+#720=EDGE_CURVE('',#690,#716,#721,.T.);+#721=LINE('',#691,#65);+#722=ORIENTED_EDGE('',*,*,#689,.F.);+#723=PLANE('',#724);+#724=AXIS2_PLACEMENT_3D('',#691,#80,#66);+#725=ADVANCED_FACE('',(#726),#734,.F.);+#726=FACE_BOUND('',#727,.F.);+#727=EDGE_LOOP('',(#728,#729,#730,#733));+#728=ORIENTED_EDGE('',*,*,#263,.T.);+#729=ORIENTED_EDGE('',*,*,#706,.T.);+#730=ORIENTED_EDGE('',*,*,#731,.F.);+#731=EDGE_CURVE('',#716,#702,#732,.T.);+#732=LINE('',#717,#72);+#733=ORIENTED_EDGE('',*,*,#715,.F.);+#734=PLANE('',#735);+#735=AXIS2_PLACEMENT_3D('',#717,#87,#73);+#736=ADVANCED_FACE('',(#737),#757,.F.);+#737=FACE_BOUND('',#738,.F.);+#738=EDGE_LOOP('',(#739,#744,#748,#750,#751,#755));+#739=ORIENTED_EDGE('',*,*,#740,.F.);+#740=EDGE_CURVE('',#741,#491,#743,.T.);+#741=VERTEX_POINT('',#742);+#742=CARTESIAN_POINT('',(-4.05,1.7,1.72));+#743=LINE('',#742,#335);+#744=ORIENTED_EDGE('',*,*,#745,.T.);+#745=EDGE_CURVE('',#741,#746,#747,.T.);+#746=VERTEX_POINT('',#334);+#747=LINE('',#742,#397);+#748=ORIENTED_EDGE('',*,*,#749,.T.);+#749=EDGE_CURVE('',#746,#331,#333,.T.);+#750=ORIENTED_EDGE('',*,*,#330,.T.);+#751=ORIENTED_EDGE('',*,*,#752,.F.);+#752=EDGE_CURVE('',#753,#325,#327,.T.);+#753=VERTEX_POINT('',#754);+#754=CARTESIAN_POINT('',(-3.675,1.7,1.72));+#755=ORIENTED_EDGE('',*,*,#756,.F.);+#756=EDGE_CURVE('',#491,#753,#743,.T.);+#757=PLANE('',#758);+#758=AXIS2_PLACEMENT_3D('',#742,#95,#336);+#759=ADVANCED_FACE('',(#760),#804,.F.);+#760=FACE_BOUND('',#761,.F.);+#761=EDGE_LOOP('',(#762,#767,#771,#775,#779,#783,#787,#789,#790,#791,#796,#801));+#762=ORIENTED_EDGE('',*,*,#763,.T.);+#763=EDGE_CURVE('',#764,#765,#327,.T.);+#764=VERTEX_POINT('',#328);+#765=VERTEX_POINT('',#766);+#766=CARTESIAN_POINT('',(-3.675,-2.11,1.72));+#767=ORIENTED_EDGE('',*,*,#768,.T.);+#768=EDGE_CURVE('',#765,#769,#327,.T.);+#769=VERTEX_POINT('',#770);+#770=CARTESIAN_POINT('',(-3.675,-1.7,1.72));+#771=ORIENTED_EDGE('',*,*,#772,.T.);+#772=EDGE_CURVE('',#769,#773,#327,.T.);+#773=VERTEX_POINT('',#774);+#774=CARTESIAN_POINT('',(-3.675,-0.84,1.72));+#775=ORIENTED_EDGE('',*,*,#776,.T.);+#776=EDGE_CURVE('',#773,#777,#327,.T.);+#777=VERTEX_POINT('',#778);+#778=CARTESIAN_POINT('',(-3.675,-0.43,1.72));+#779=ORIENTED_EDGE('',*,*,#780,.T.);+#780=EDGE_CURVE('',#777,#781,#327,.T.);+#781=VERTEX_POINT('',#782);+#782=CARTESIAN_POINT('',(-3.675,0.43,1.72));+#783=ORIENTED_EDGE('',*,*,#784,.T.);+#784=EDGE_CURVE('',#781,#785,#327,.T.);+#785=VERTEX_POINT('',#786);+#786=CARTESIAN_POINT('',(-3.675,0.84,1.72));+#787=ORIENTED_EDGE('',*,*,#788,.T.);+#788=EDGE_CURVE('',#785,#753,#327,.T.);+#789=ORIENTED_EDGE('',*,*,#752,.T.);+#790=ORIENTED_EDGE('',*,*,#324,.T.);+#791=ORIENTED_EDGE('',*,*,#792,.T.);+#792=EDGE_CURVE('',#320,#793,#795,.T.);+#793=VERTEX_POINT('',#794);+#794=CARTESIAN_POINT('',(-3.523215898521,2.636607949261,2.8));+#795=B_SPLINE_CURVE_WITH_KNOTS('',1,(#321,#794),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#796=ORIENTED_EDGE('',*,*,#797,.F.);+#797=EDGE_CURVE('',#798,#793,#800,.T.);+#798=VERTEX_POINT('',#799);+#799=CARTESIAN_POINT('',(-3.523215898521,-2.636607949261,2.8));+#800=LINE('',#799,#86);+#801=ORIENTED_EDGE('',*,*,#802,.F.);+#802=EDGE_CURVE('',#764,#798,#803,.T.);+#803=B_SPLINE_CURVE_WITH_KNOTS('',1,(#328,#799),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#804=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#328,#799),(#321,#794)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.425),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#805=ADVANCED_FACE('',(#806),#818,.F.);+#806=FACE_BOUND('',#807,.F.);+#807=EDGE_LOOP('',(#808,#809,#814,#817));+#808=ORIENTED_EDGE('',*,*,#319,.T.);+#809=ORIENTED_EDGE('',*,*,#810,.T.);+#810=EDGE_CURVE('',#315,#811,#813,.T.);+#811=VERTEX_POINT('',#812);+#812=CARTESIAN_POINT('',(-3.461607949261,2.698215898521,2.8));+#813=B_SPLINE_CURVE_WITH_KNOTS('',1,(#316,#812),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#814=ORIENTED_EDGE('',*,*,#815,.F.);+#815=EDGE_CURVE('',#793,#811,#816,.T.);+#816=LINE('',#794,#91);+#817=ORIENTED_EDGE('',*,*,#792,.F.);+#818=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#321,#794),(#316,#812)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#819=ADVANCED_FACE('',(#820),#832,.F.);+#820=FACE_BOUND('',#821,.F.);+#821=EDGE_LOOP('',(#822,#823,#828,#831));+#822=ORIENTED_EDGE('',*,*,#314,.T.);+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#310,#825,#827,.T.);+#825=VERTEX_POINT('',#826);+#826=CARTESIAN_POINT('',(3.461607949261,2.698215898521,2.8));+#827=B_SPLINE_CURVE_WITH_KNOTS('',1,(#311,#826),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#828=ORIENTED_EDGE('',*,*,#829,.F.);+#829=EDGE_CURVE('',#811,#825,#830,.T.);+#830=LINE('',#812,#27);+#831=ORIENTED_EDGE('',*,*,#810,.F.);+#832=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#316,#812),(#311,#826)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#833=ADVANCED_FACE('',(#834),#846,.F.);+#834=FACE_BOUND('',#835,.F.);+#835=EDGE_LOOP('',(#836,#837,#842,#845));+#836=ORIENTED_EDGE('',*,*,#309,.T.);+#837=ORIENTED_EDGE('',*,*,#838,.T.);+#838=EDGE_CURVE('',#305,#839,#841,.T.);+#839=VERTEX_POINT('',#840);+#840=CARTESIAN_POINT('',(3.523215898521,2.636607949261,2.8));+#841=B_SPLINE_CURVE_WITH_KNOTS('',1,(#306,#840),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#842=ORIENTED_EDGE('',*,*,#843,.F.);+#843=EDGE_CURVE('',#825,#839,#844,.T.);+#844=LINE('',#826,#51);+#845=ORIENTED_EDGE('',*,*,#824,.F.);+#846=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#311,#826),(#306,#840)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#847=ADVANCED_FACE('',(#848),#892,.F.);+#848=FACE_BOUND('',#849,.F.);+#849=EDGE_LOOP('',(#850,#851,#855,#859,#863,#867,#871,#875,#879,#883,#888,#891));+#850=ORIENTED_EDGE('',*,*,#304,.T.);+#851=ORIENTED_EDGE('',*,*,#852,.T.);+#852=EDGE_CURVE('',#299,#853,#307,.T.);+#853=VERTEX_POINT('',#854);+#854=CARTESIAN_POINT('',(3.675,1.7,1.72));+#855=ORIENTED_EDGE('',*,*,#856,.T.);+#856=EDGE_CURVE('',#853,#857,#307,.T.);+#857=VERTEX_POINT('',#858);+#858=CARTESIAN_POINT('',(3.675,0.84,1.72));+#859=ORIENTED_EDGE('',*,*,#860,.T.);+#860=EDGE_CURVE('',#857,#861,#307,.T.);+#861=VERTEX_POINT('',#862);+#862=CARTESIAN_POINT('',(3.675,0.43,1.72));+#863=ORIENTED_EDGE('',*,*,#864,.T.);+#864=EDGE_CURVE('',#861,#865,#307,.T.);+#865=VERTEX_POINT('',#866);+#866=CARTESIAN_POINT('',(3.675,-0.43,1.72));+#867=ORIENTED_EDGE('',*,*,#868,.T.);+#868=EDGE_CURVE('',#865,#869,#307,.T.);+#869=VERTEX_POINT('',#870);+#870=CARTESIAN_POINT('',(3.675,-0.84,1.72));+#871=ORIENTED_EDGE('',*,*,#872,.T.);+#872=EDGE_CURVE('',#869,#873,#307,.T.);+#873=VERTEX_POINT('',#874);+#874=CARTESIAN_POINT('',(3.675,-1.7,1.72));+#875=ORIENTED_EDGE('',*,*,#876,.T.);+#876=EDGE_CURVE('',#873,#877,#307,.T.);+#877=VERTEX_POINT('',#878);+#878=CARTESIAN_POINT('',(3.675,-2.11,1.72));+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#877,#881,#307,.T.);+#881=VERTEX_POINT('',#882);+#882=CARTESIAN_POINT('',(3.675,-2.7125,1.72));+#883=ORIENTED_EDGE('',*,*,#884,.T.);+#884=EDGE_CURVE('',#881,#885,#887,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(3.523215898521,-2.636607949261,2.8));+#887=B_SPLINE_CURVE_WITH_KNOTS('',1,(#882,#886),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#888=ORIENTED_EDGE('',*,*,#889,.F.);+#889=EDGE_CURVE('',#839,#885,#890,.T.);+#890=LINE('',#840,#58);+#891=ORIENTED_EDGE('',*,*,#838,.F.);+#892=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#306,#840),(#882,#886)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.425),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#893=ADVANCED_FACE('',(#894),#911,.F.);+#894=FACE_BOUND('',#895,.F.);+#895=EDGE_LOOP('',(#896,#899,#904,#907,#909,#910));+#896=ORIENTED_EDGE('',*,*,#897,.F.);+#897=EDGE_CURVE('',#898,#294,#301,.T.);+#898=VERTEX_POINT('',#302);+#899=ORIENTED_EDGE('',*,*,#900,.T.);+#900=EDGE_CURVE('',#898,#901,#903,.T.);+#901=VERTEX_POINT('',#902);+#902=CARTESIAN_POINT('',(4.05,1.7,1.72));+#903=LINE('',#302,#58);+#904=ORIENTED_EDGE('',*,*,#905,.T.);+#905=EDGE_CURVE('',#901,#566,#906,.T.);+#906=LINE('',#902,#72);+#907=ORIENTED_EDGE('',*,*,#908,.T.);+#908=EDGE_CURVE('',#566,#853,#906,.T.);+#909=ORIENTED_EDGE('',*,*,#852,.F.);+#910=ORIENTED_EDGE('',*,*,#298,.F.);+#911=PLANE('',#912);+#912=AXIS2_PLACEMENT_3D('',#302,#95,#73);+#913=ADVANCED_FACE('',(#914),#341,.F.);+#914=FACE_BOUND('',#915,.F.);+#915=EDGE_LOOP('',(#916,#917,#921,#922,#927,#932,#935,#936,#940,#941,#942,#943));+#916=ORIENTED_EDGE('',*,*,#373,.T.);+#917=ORIENTED_EDGE('',*,*,#918,.T.);+#918=EDGE_CURVE('',#367,#765,#919,.T.);+#919=LINE('',#920,#335);+#920=CARTESIAN_POINT('',(-4.05,-2.11,1.72));+#921=ORIENTED_EDGE('',*,*,#763,.F.);+#922=ORIENTED_EDGE('',*,*,#923,.F.);+#923=EDGE_CURVE('',#924,#764,#926,.T.);+#924=VERTEX_POINT('',#925);+#925=CARTESIAN_POINT('',(-3.5375,-2.85,1.72));+#926=LINE('',#925,#79);+#927=ORIENTED_EDGE('',*,*,#928,.F.);+#928=EDGE_CURVE('',#929,#924,#931,.T.);+#929=VERTEX_POINT('',#930);+#930=CARTESIAN_POINT('',(3.5375,-2.85,1.72));+#931=LINE('',#930,#72);+#932=ORIENTED_EDGE('',*,*,#933,.F.);+#933=EDGE_CURVE('',#881,#929,#934,.T.);+#934=LINE('',#882,#65);+#935=ORIENTED_EDGE('',*,*,#880,.F.);+#936=ORIENTED_EDGE('',*,*,#937,.F.);+#937=EDGE_CURVE('',#683,#877,#938,.T.);+#938=LINE('',#939,#72);+#939=CARTESIAN_POINT('',(4.05,-2.11,1.72));+#940=ORIENTED_EDGE('',*,*,#694,.T.);+#941=ORIENTED_EDGE('',*,*,#720,.T.);+#942=ORIENTED_EDGE('',*,*,#731,.T.);+#943=ORIENTED_EDGE('',*,*,#701,.T.);+#944=ADVANCED_FACE('',(#945),#1012,.F.);+#945=FACE_BOUND('',#946,.F.);+#946=EDGE_LOOP('',(#947,#948,#949,#957,#964,#973,#978,#983,#988,#996,#1003,#1010));+#947=ORIENTED_EDGE('',*,*,#366,.F.);+#948=ORIENTED_EDGE('',*,*,#380,.T.);+#949=ORIENTED_EDGE('',*,*,#950,.T.);+#950=EDGE_CURVE('',#381,#951,#953,.T.);+#951=VERTEX_POINT('',#952);+#952=CARTESIAN_POINT('',(-4.148480775301,-2.11,1.407364817767));+#953=CIRCLE('',#954,0.1);+#954=AXIS2_PLACEMENT_3D('',#955,#956,#13);+#955=CARTESIAN_POINT('',(-4.05,-2.11,1.39));+#956=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#957=ORIENTED_EDGE('',*,*,#958,.T.);+#958=EDGE_CURVE('',#951,#959,#961,.T.);+#959=VERTEX_POINT('',#960);+#960=CARTESIAN_POINT('',(-4.341920041057,-2.11,0.27269610137));+#961=LINE('',#952,#962);+#962=VECTOR('',#963,1.);+#963=DIRECTION('',(-0.168056154428,1.922961952135E-18,-0.98577742364));+#964=ORIENTED_EDGE('',*,*,#965,.T.);+#965=EDGE_CURVE('',#959,#966,#968,.T.);+#966=VERTEX_POINT('',#967);+#967=CARTESIAN_POINT('',(-4.666906599551,-2.11,1.665334536938E-16));+#968=CIRCLE('',#969,0.33);+#969=AXIS2_PLACEMENT_3D('',#970,#971,#972);+#970=CARTESIAN_POINT('',(-4.666906599551,-2.11,0.33));+#971=DIRECTION('',(1.144237745222E-17,1.,2.311115933265E-33));+#972=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#973=ORIENTED_EDGE('',*,*,#974,.T.);+#974=EDGE_CURVE('',#966,#975,#977,.T.);+#975=VERTEX_POINT('',#976);+#976=CARTESIAN_POINT('',(-5.75,-2.11,1.665334536938E-16));+#977=LINE('',#967,#385);+#978=ORIENTED_EDGE('',*,*,#979,.T.);+#979=EDGE_CURVE('',#975,#980,#982,.T.);+#980=VERTEX_POINT('',#981);+#981=CARTESIAN_POINT('',(-5.75,-2.11,0.23));+#982=LINE('',#976,#371);+#983=ORIENTED_EDGE('',*,*,#984,.T.);+#984=EDGE_CURVE('',#980,#985,#987,.T.);+#985=VERTEX_POINT('',#986);+#986=CARTESIAN_POINT('',(-4.666906599551,-2.11,0.23));+#987=LINE('',#981,#335);+#988=ORIENTED_EDGE('',*,*,#989,.T.);+#989=EDGE_CURVE('',#985,#990,#992,.T.);+#990=VERTEX_POINT('',#991);+#991=CARTESIAN_POINT('',(-4.56842582425,-2.11,0.312635182233));+#992=CIRCLE('',#993,1.E-01);+#993=AXIS2_PLACEMENT_3D('',#970,#994,#995);+#994=DIRECTION('',(-1.144237745222E-17,-1.,4.379057701015E-47));+#995=DIRECTION('',(-1.7763568394E-14,2.032574544625E-31,-1.));+#996=ORIENTED_EDGE('',*,*,#997,.T.);+#997=EDGE_CURVE('',#990,#998,#1000,.T.);+#998=VERTEX_POINT('',#999);+#999=CARTESIAN_POINT('',(-4.374986558494,-2.11,1.44730389863));+#1000=LINE('',#991,#1001);+#1001=VECTOR('',#1002,1.);+#1002=DIRECTION('',(0.168056154428,-1.922961952135E-18,0.98577742364));+#1003=ORIENTED_EDGE('',*,*,#1004,.T.);+#1004=EDGE_CURVE('',#998,#1005,#1006,.T.);+#1005=VERTEX_POINT('',#920);+#1006=CIRCLE('',#1007,0.33);+#1007=AXIS2_PLACEMENT_3D('',#955,#1008,#1009);+#1008=DIRECTION('',(1.144237745222E-17,1.,1.925929944387E-33));+#1009=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#1010=ORIENTED_EDGE('',*,*,#1011,.T.);+#1011=EDGE_CURVE('',#1005,#367,#919,.T.);+#1012=PLANE('',#1013);+#1013=AXIS2_PLACEMENT_3D('',#1014,#398,#13);+#1014=CARTESIAN_POINT('',(-4.57314551832,-2.11,0.725591846374));+#1015=ADVANCED_FACE('',(#1016),#1030,.F.);+#1016=FACE_BOUND('',#1017,.F.);+#1017=EDGE_LOOP('',(#1018,#1019,#1026,#1029));+#1018=ORIENTED_EDGE('',*,*,#395,.T.);+#1019=ORIENTED_EDGE('',*,*,#1020,.T.);+#1020=EDGE_CURVE('',#390,#1021,#1023,.T.);+#1021=VERTEX_POINT('',#1022);+#1022=CARTESIAN_POINT('',(-4.148480775301,-1.7,1.407364817767));+#1023=CIRCLE('',#1024,0.1);+#1024=AXIS2_PLACEMENT_3D('',#1025,#956,#13);+#1025=CARTESIAN_POINT('',(-4.05,-1.7,1.39));+#1026=ORIENTED_EDGE('',*,*,#1027,.F.);+#1027=EDGE_CURVE('',#951,#1021,#1028,.T.);+#1028=LINE('',#952,#397);+#1029=ORIENTED_EDGE('',*,*,#950,.F.);+#1030=CYLINDRICAL_SURFACE('',#954,0.1);+#1031=ADVANCED_FACE('',(#1032),#1081,.T.);+#1032=FACE_BOUND('',#1033,.T.);+#1033=EDGE_LOOP('',(#404,#388,#1019,#1034,#1039,#1046,#1051,#1056,#1061,#1067,#1072,#1078));+#1034=ORIENTED_EDGE('',*,*,#1035,.T.);+#1035=EDGE_CURVE('',#1021,#1036,#1038,.T.);+#1036=VERTEX_POINT('',#1037);+#1037=CARTESIAN_POINT('',(-4.341920041057,-1.7,0.27269610137));+#1038=LINE('',#1022,#962);+#1039=ORIENTED_EDGE('',*,*,#1040,.T.);+#1040=EDGE_CURVE('',#1036,#1041,#1043,.T.);+#1041=VERTEX_POINT('',#1042);+#1042=CARTESIAN_POINT('',(-4.666906599551,-1.7,1.665334536938E-16));+#1043=CIRCLE('',#1044,0.33);+#1044=AXIS2_PLACEMENT_3D('',#1045,#971,#972);+#1045=CARTESIAN_POINT('',(-4.666906599551,-1.7,0.33));+#1046=ORIENTED_EDGE('',*,*,#1047,.T.);+#1047=EDGE_CURVE('',#1041,#1048,#1050,.T.);+#1048=VERTEX_POINT('',#1049);+#1049=CARTESIAN_POINT('',(-5.75,-1.7,1.665334536938E-16));+#1050=LINE('',#1042,#385);+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1048,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-5.75,-1.7,0.23));+#1055=LINE('',#1049,#371);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1053,#1058,#1060,.T.);+#1058=VERTEX_POINT('',#1059);+#1059=CARTESIAN_POINT('',(-4.666906599551,-1.7,0.23));+#1060=LINE('',#1054,#335);+#1061=ORIENTED_EDGE('',*,*,#1062,.T.);+#1062=EDGE_CURVE('',#1058,#1063,#1065,.T.);+#1063=VERTEX_POINT('',#1064);+#1064=CARTESIAN_POINT('',(-4.56842582425,-1.7,0.312635182233));+#1065=CIRCLE('',#1066,1.E-01);+#1066=AXIS2_PLACEMENT_3D('',#1045,#994,#995);+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#1063,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-4.374986558494,-1.7,1.44730389863));+#1071=LINE('',#1064,#1001);+#1072=ORIENTED_EDGE('',*,*,#1073,.T.);+#1073=EDGE_CURVE('',#1069,#1074,#1076,.T.);+#1074=VERTEX_POINT('',#1075);+#1075=CARTESIAN_POINT('',(-4.05,-1.7,1.72));+#1076=CIRCLE('',#1077,0.33);+#1077=AXIS2_PLACEMENT_3D('',#1025,#1008,#1009);+#1078=ORIENTED_EDGE('',*,*,#1079,.T.);+#1079=EDGE_CURVE('',#1074,#406,#1080,.T.);+#1080=LINE('',#1075,#335);+#1081=PLANE('',#1082);+#1082=AXIS2_PLACEMENT_3D('',#1083,#398,#13);+#1083=CARTESIAN_POINT('',(-4.57314551832,-1.7,0.725591846374));+#1084=ADVANCED_FACE('',(#1085),#341,.F.);+#1085=FACE_BOUND('',#1086,.F.);+#1086=EDGE_LOOP('',(#1087,#1088,#1092,#1093));+#1087=ORIENTED_EDGE('',*,*,#418,.T.);+#1088=ORIENTED_EDGE('',*,*,#1089,.T.);+#1089=EDGE_CURVE('',#413,#773,#1090,.T.);+#1090=LINE('',#1091,#335);+#1091=CARTESIAN_POINT('',(-4.05,-0.84,1.72));+#1092=ORIENTED_EDGE('',*,*,#772,.F.);+#1093=ORIENTED_EDGE('',*,*,#1094,.F.);+#1094=EDGE_CURVE('',#406,#769,#1080,.T.);+#1095=ADVANCED_FACE('',(#1096),#1152,.F.);+#1096=FACE_BOUND('',#1097,.F.);+#1097=EDGE_LOOP('',(#1098,#1099,#1100,#1107,#1112,#1119,#1124,#1129,#1134,#1140,#1145,#1150));+#1098=ORIENTED_EDGE('',*,*,#412,.F.);+#1099=ORIENTED_EDGE('',*,*,#423,.T.);+#1100=ORIENTED_EDGE('',*,*,#1101,.T.);+#1101=EDGE_CURVE('',#424,#1102,#1104,.T.);+#1102=VERTEX_POINT('',#1103);+#1103=CARTESIAN_POINT('',(-4.148480775301,-0.84,1.407364817767));+#1104=CIRCLE('',#1105,0.1);+#1105=AXIS2_PLACEMENT_3D('',#1106,#956,#13);+#1106=CARTESIAN_POINT('',(-4.05,-0.84,1.39));+#1107=ORIENTED_EDGE('',*,*,#1108,.T.);+#1108=EDGE_CURVE('',#1102,#1109,#1111,.T.);+#1109=VERTEX_POINT('',#1110);+#1110=CARTESIAN_POINT('',(-4.341920041057,-0.84,0.27269610137));+#1111=LINE('',#1103,#962);+#1112=ORIENTED_EDGE('',*,*,#1113,.T.);+#1113=EDGE_CURVE('',#1109,#1114,#1116,.T.);+#1114=VERTEX_POINT('',#1115);+#1115=CARTESIAN_POINT('',(-4.666906599551,-0.84,1.665334536938E-16));+#1116=CIRCLE('',#1117,0.33);+#1117=AXIS2_PLACEMENT_3D('',#1118,#971,#972);+#1118=CARTESIAN_POINT('',(-4.666906599551,-0.84,0.33));+#1119=ORIENTED_EDGE('',*,*,#1120,.T.);+#1120=EDGE_CURVE('',#1114,#1121,#1123,.T.);+#1121=VERTEX_POINT('',#1122);+#1122=CARTESIAN_POINT('',(-5.75,-0.84,1.665334536938E-16));+#1123=LINE('',#1115,#385);+#1124=ORIENTED_EDGE('',*,*,#1125,.T.);+#1125=EDGE_CURVE('',#1121,#1126,#1128,.T.);+#1126=VERTEX_POINT('',#1127);+#1127=CARTESIAN_POINT('',(-5.75,-0.84,0.23));+#1128=LINE('',#1122,#371);+#1129=ORIENTED_EDGE('',*,*,#1130,.T.);+#1130=EDGE_CURVE('',#1126,#1131,#1133,.T.);+#1131=VERTEX_POINT('',#1132);+#1132=CARTESIAN_POINT('',(-4.666906599551,-0.84,0.23));+#1133=LINE('',#1127,#335);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#1131,#1136,#1138,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(-4.56842582425,-0.84,0.312635182233));+#1138=CIRCLE('',#1139,1.E-01);+#1139=AXIS2_PLACEMENT_3D('',#1118,#994,#995);+#1140=ORIENTED_EDGE('',*,*,#1141,.T.);+#1141=EDGE_CURVE('',#1136,#1142,#1144,.T.);+#1142=VERTEX_POINT('',#1143);+#1143=CARTESIAN_POINT('',(-4.374986558494,-0.84,1.44730389863));+#1144=LINE('',#1137,#1001);+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#1142,#1147,#1148,.T.);+#1147=VERTEX_POINT('',#1091);+#1148=CIRCLE('',#1149,0.33);+#1149=AXIS2_PLACEMENT_3D('',#1106,#1008,#1009);+#1150=ORIENTED_EDGE('',*,*,#1151,.T.);+#1151=EDGE_CURVE('',#1147,#413,#1090,.T.);+#1152=PLANE('',#1153);+#1153=AXIS2_PLACEMENT_3D('',#1154,#398,#13);+#1154=CARTESIAN_POINT('',(-4.57314551832,-0.84,0.725591846374));+#1155=ADVANCED_FACE('',(#1156),#1170,.F.);+#1156=FACE_BOUND('',#1157,.F.);+#1157=EDGE_LOOP('',(#1158,#1159,#1166,#1169));+#1158=ORIENTED_EDGE('',*,*,#436,.T.);+#1159=ORIENTED_EDGE('',*,*,#1160,.T.);+#1160=EDGE_CURVE('',#431,#1161,#1163,.T.);+#1161=VERTEX_POINT('',#1162);+#1162=CARTESIAN_POINT('',(-4.148480775301,-0.43,1.407364817767));+#1163=CIRCLE('',#1164,0.1);+#1164=AXIS2_PLACEMENT_3D('',#1165,#956,#13);+#1165=CARTESIAN_POINT('',(-4.05,-0.43,1.39));+#1166=ORIENTED_EDGE('',*,*,#1167,.F.);+#1167=EDGE_CURVE('',#1102,#1161,#1168,.T.);+#1168=LINE('',#1103,#397);+#1169=ORIENTED_EDGE('',*,*,#1101,.F.);+#1170=CYLINDRICAL_SURFACE('',#1105,0.1);+#1171=ADVANCED_FACE('',(#1172),#1221,.T.);+#1172=FACE_BOUND('',#1173,.T.);+#1173=EDGE_LOOP('',(#443,#429,#1159,#1174,#1179,#1186,#1191,#1196,#1201,#1207,#1212,#1218));+#1174=ORIENTED_EDGE('',*,*,#1175,.T.);+#1175=EDGE_CURVE('',#1161,#1176,#1178,.T.);+#1176=VERTEX_POINT('',#1177);+#1177=CARTESIAN_POINT('',(-4.341920041057,-0.43,0.27269610137));+#1178=LINE('',#1162,#962);+#1179=ORIENTED_EDGE('',*,*,#1180,.T.);+#1180=EDGE_CURVE('',#1176,#1181,#1183,.T.);+#1181=VERTEX_POINT('',#1182);+#1182=CARTESIAN_POINT('',(-4.666906599551,-0.43,1.665334536938E-16));+#1183=CIRCLE('',#1184,0.33);+#1184=AXIS2_PLACEMENT_3D('',#1185,#971,#972);+#1185=CARTESIAN_POINT('',(-4.666906599551,-0.43,0.33));+#1186=ORIENTED_EDGE('',*,*,#1187,.T.);+#1187=EDGE_CURVE('',#1181,#1188,#1190,.T.);+#1188=VERTEX_POINT('',#1189);+#1189=CARTESIAN_POINT('',(-5.75,-0.43,1.665334536938E-16));+#1190=LINE('',#1182,#385);+#1191=ORIENTED_EDGE('',*,*,#1192,.T.);+#1192=EDGE_CURVE('',#1188,#1193,#1195,.T.);+#1193=VERTEX_POINT('',#1194);+#1194=CARTESIAN_POINT('',(-5.75,-0.43,0.23));+#1195=LINE('',#1189,#371);+#1196=ORIENTED_EDGE('',*,*,#1197,.T.);+#1197=EDGE_CURVE('',#1193,#1198,#1200,.T.);+#1198=VERTEX_POINT('',#1199);+#1199=CARTESIAN_POINT('',(-4.666906599551,-0.43,0.23));+#1200=LINE('',#1194,#335);+#1201=ORIENTED_EDGE('',*,*,#1202,.T.);+#1202=EDGE_CURVE('',#1198,#1203,#1205,.T.);+#1203=VERTEX_POINT('',#1204);+#1204=CARTESIAN_POINT('',(-4.56842582425,-0.43,0.312635182233));+#1205=CIRCLE('',#1206,1.E-01);+#1206=AXIS2_PLACEMENT_3D('',#1185,#994,#995);+#1207=ORIENTED_EDGE('',*,*,#1208,.T.);+#1208=EDGE_CURVE('',#1203,#1209,#1211,.T.);+#1209=VERTEX_POINT('',#1210);+#1210=CARTESIAN_POINT('',(-4.374986558494,-0.43,1.44730389863));+#1211=LINE('',#1204,#1001);+#1212=ORIENTED_EDGE('',*,*,#1213,.T.);+#1213=EDGE_CURVE('',#1209,#1214,#1216,.T.);+#1214=VERTEX_POINT('',#1215);+#1215=CARTESIAN_POINT('',(-4.05,-0.43,1.72));+#1216=CIRCLE('',#1217,0.33);+#1217=AXIS2_PLACEMENT_3D('',#1165,#1008,#1009);+#1218=ORIENTED_EDGE('',*,*,#1219,.T.);+#1219=EDGE_CURVE('',#1214,#445,#1220,.T.);+#1220=LINE('',#1215,#335);+#1221=PLANE('',#1222);+#1222=AXIS2_PLACEMENT_3D('',#1223,#398,#13);+#1223=CARTESIAN_POINT('',(-4.57314551832,-0.43,0.725591846374));+#1224=ADVANCED_FACE('',(#1225),#341,.F.);+#1225=FACE_BOUND('',#1226,.F.);+#1226=EDGE_LOOP('',(#1227,#1228,#1232,#1233));+#1227=ORIENTED_EDGE('',*,*,#457,.T.);+#1228=ORIENTED_EDGE('',*,*,#1229,.T.);+#1229=EDGE_CURVE('',#452,#781,#1230,.T.);+#1230=LINE('',#1231,#335);+#1231=CARTESIAN_POINT('',(-4.05,0.43,1.72));+#1232=ORIENTED_EDGE('',*,*,#780,.F.);+#1233=ORIENTED_EDGE('',*,*,#1234,.F.);+#1234=EDGE_CURVE('',#445,#777,#1220,.T.);+#1235=ADVANCED_FACE('',(#1236),#1292,.F.);+#1236=FACE_BOUND('',#1237,.F.);+#1237=EDGE_LOOP('',(#1238,#1239,#1240,#1247,#1252,#1259,#1264,#1269,#1274,#1280,#1285,#1290));+#1238=ORIENTED_EDGE('',*,*,#451,.F.);+#1239=ORIENTED_EDGE('',*,*,#462,.T.);+#1240=ORIENTED_EDGE('',*,*,#1241,.T.);+#1241=EDGE_CURVE('',#463,#1242,#1244,.T.);+#1242=VERTEX_POINT('',#1243);+#1243=CARTESIAN_POINT('',(-4.148480775301,0.43,1.407364817767));+#1244=CIRCLE('',#1245,0.1);+#1245=AXIS2_PLACEMENT_3D('',#1246,#956,#13);+#1246=CARTESIAN_POINT('',(-4.05,0.43,1.39));+#1247=ORIENTED_EDGE('',*,*,#1248,.T.);+#1248=EDGE_CURVE('',#1242,#1249,#1251,.T.);+#1249=VERTEX_POINT('',#1250);+#1250=CARTESIAN_POINT('',(-4.341920041057,0.43,0.27269610137));+#1251=LINE('',#1243,#962);+#1252=ORIENTED_EDGE('',*,*,#1253,.T.);+#1253=EDGE_CURVE('',#1249,#1254,#1256,.T.);+#1254=VERTEX_POINT('',#1255);+#1255=CARTESIAN_POINT('',(-4.666906599551,0.43,1.665334536938E-16));+#1256=CIRCLE('',#1257,0.33);+#1257=AXIS2_PLACEMENT_3D('',#1258,#971,#972);+#1258=CARTESIAN_POINT('',(-4.666906599551,0.43,0.33));+#1259=ORIENTED_EDGE('',*,*,#1260,.T.);+#1260=EDGE_CURVE('',#1254,#1261,#1263,.T.);+#1261=VERTEX_POINT('',#1262);+#1262=CARTESIAN_POINT('',(-5.75,0.43,1.665334536938E-16));+#1263=LINE('',#1255,#385);+#1264=ORIENTED_EDGE('',*,*,#1265,.T.);+#1265=EDGE_CURVE('',#1261,#1266,#1268,.T.);+#1266=VERTEX_POINT('',#1267);+#1267=CARTESIAN_POINT('',(-5.75,0.43,0.23));+#1268=LINE('',#1262,#371);+#1269=ORIENTED_EDGE('',*,*,#1270,.T.);+#1270=EDGE_CURVE('',#1266,#1271,#1273,.T.);+#1271=VERTEX_POINT('',#1272);+#1272=CARTESIAN_POINT('',(-4.666906599551,0.43,0.23));+#1273=LINE('',#1267,#335);+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1271,#1276,#1278,.T.);+#1276=VERTEX_POINT('',#1277);+#1277=CARTESIAN_POINT('',(-4.56842582425,0.43,0.312635182233));+#1278=CIRCLE('',#1279,1.E-01);+#1279=AXIS2_PLACEMENT_3D('',#1258,#994,#995);+#1280=ORIENTED_EDGE('',*,*,#1281,.T.);+#1281=EDGE_CURVE('',#1276,#1282,#1284,.T.);+#1282=VERTEX_POINT('',#1283);+#1283=CARTESIAN_POINT('',(-4.374986558494,0.43,1.44730389863));+#1284=LINE('',#1277,#1001);+#1285=ORIENTED_EDGE('',*,*,#1286,.T.);+#1286=EDGE_CURVE('',#1282,#1287,#1288,.T.);+#1287=VERTEX_POINT('',#1231);+#1288=CIRCLE('',#1289,0.33);+#1289=AXIS2_PLACEMENT_3D('',#1246,#1008,#1009);+#1290=ORIENTED_EDGE('',*,*,#1291,.T.);+#1291=EDGE_CURVE('',#1287,#452,#1230,.T.);+#1292=PLANE('',#1293);+#1293=AXIS2_PLACEMENT_3D('',#1294,#398,#13);+#1294=CARTESIAN_POINT('',(-4.57314551832,0.43,0.725591846374));+#1295=ADVANCED_FACE('',(#1296),#1310,.F.);+#1296=FACE_BOUND('',#1297,.F.);+#1297=EDGE_LOOP('',(#1298,#1299,#1306,#1309));+#1298=ORIENTED_EDGE('',*,*,#475,.T.);+#1299=ORIENTED_EDGE('',*,*,#1300,.T.);+#1300=EDGE_CURVE('',#470,#1301,#1303,.T.);+#1301=VERTEX_POINT('',#1302);+#1302=CARTESIAN_POINT('',(-4.148480775301,0.84,1.407364817767));+#1303=CIRCLE('',#1304,0.1);+#1304=AXIS2_PLACEMENT_3D('',#1305,#956,#13);+#1305=CARTESIAN_POINT('',(-4.05,0.84,1.39));+#1306=ORIENTED_EDGE('',*,*,#1307,.F.);+#1307=EDGE_CURVE('',#1242,#1301,#1308,.T.);+#1308=LINE('',#1243,#397);+#1309=ORIENTED_EDGE('',*,*,#1241,.F.);+#1310=CYLINDRICAL_SURFACE('',#1245,0.1);+#1311=ADVANCED_FACE('',(#1312),#1361,.T.);+#1312=FACE_BOUND('',#1313,.T.);+#1313=EDGE_LOOP('',(#482,#468,#1299,#1314,#1319,#1326,#1331,#1336,#1341,#1347,#1352,#1358));+#1314=ORIENTED_EDGE('',*,*,#1315,.T.);+#1315=EDGE_CURVE('',#1301,#1316,#1318,.T.);+#1316=VERTEX_POINT('',#1317);+#1317=CARTESIAN_POINT('',(-4.341920041057,0.84,0.27269610137));+#1318=LINE('',#1302,#962);+#1319=ORIENTED_EDGE('',*,*,#1320,.T.);+#1320=EDGE_CURVE('',#1316,#1321,#1323,.T.);+#1321=VERTEX_POINT('',#1322);+#1322=CARTESIAN_POINT('',(-4.666906599551,0.84,1.665334536938E-16));+#1323=CIRCLE('',#1324,0.33);+#1324=AXIS2_PLACEMENT_3D('',#1325,#971,#972);+#1325=CARTESIAN_POINT('',(-4.666906599551,0.84,0.33));+#1326=ORIENTED_EDGE('',*,*,#1327,.T.);+#1327=EDGE_CURVE('',#1321,#1328,#1330,.T.);+#1328=VERTEX_POINT('',#1329);+#1329=CARTESIAN_POINT('',(-5.75,0.84,1.665334536938E-16));+#1330=LINE('',#1322,#385);+#1331=ORIENTED_EDGE('',*,*,#1332,.T.);+#1332=EDGE_CURVE('',#1328,#1333,#1335,.T.);+#1333=VERTEX_POINT('',#1334);+#1334=CARTESIAN_POINT('',(-5.75,0.84,0.23));+#1335=LINE('',#1329,#371);+#1336=ORIENTED_EDGE('',*,*,#1337,.T.);+#1337=EDGE_CURVE('',#1333,#1338,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(-4.666906599551,0.84,0.23));+#1340=LINE('',#1334,#335);+#1341=ORIENTED_EDGE('',*,*,#1342,.T.);+#1342=EDGE_CURVE('',#1338,#1343,#1345,.T.);+#1343=VERTEX_POINT('',#1344);+#1344=CARTESIAN_POINT('',(-4.56842582425,0.84,0.312635182233));+#1345=CIRCLE('',#1346,1.E-01);+#1346=AXIS2_PLACEMENT_3D('',#1325,#994,#995);+#1347=ORIENTED_EDGE('',*,*,#1348,.T.);+#1348=EDGE_CURVE('',#1343,#1349,#1351,.T.);+#1349=VERTEX_POINT('',#1350);+#1350=CARTESIAN_POINT('',(-4.374986558494,0.84,1.44730389863));+#1351=LINE('',#1344,#1001);+#1352=ORIENTED_EDGE('',*,*,#1353,.T.);+#1353=EDGE_CURVE('',#1349,#1354,#1356,.T.);+#1354=VERTEX_POINT('',#1355);+#1355=CARTESIAN_POINT('',(-4.05,0.84,1.72));+#1356=CIRCLE('',#1357,0.33);+#1357=AXIS2_PLACEMENT_3D('',#1305,#1008,#1009);+#1358=ORIENTED_EDGE('',*,*,#1359,.T.);+#1359=EDGE_CURVE('',#1354,#484,#1360,.T.);+#1360=LINE('',#1355,#335);+#1361=PLANE('',#1362);+#1362=AXIS2_PLACEMENT_3D('',#1363,#398,#13);+#1363=CARTESIAN_POINT('',(-4.57314551832,0.84,0.725591846374));+#1364=ADVANCED_FACE('',(#1365),#341,.F.);+#1365=FACE_BOUND('',#1366,.F.);+#1366=EDGE_LOOP('',(#1367,#1368,#1369,#1370));+#1367=ORIENTED_EDGE('',*,*,#496,.T.);+#1368=ORIENTED_EDGE('',*,*,#756,.T.);+#1369=ORIENTED_EDGE('',*,*,#788,.F.);+#1370=ORIENTED_EDGE('',*,*,#1371,.F.);+#1371=EDGE_CURVE('',#484,#785,#1360,.T.);+#1372=ADVANCED_FACE('',(#1373),#1427,.F.);+#1373=FACE_BOUND('',#1374,.F.);+#1374=EDGE_LOOP('',(#1375,#1376,#1377,#1384,#1389,#1396,#1401,#1406,#1411,#1417,#1422,#1426));+#1375=ORIENTED_EDGE('',*,*,#490,.F.);+#1376=ORIENTED_EDGE('',*,*,#501,.T.);+#1377=ORIENTED_EDGE('',*,*,#1378,.T.);+#1378=EDGE_CURVE('',#502,#1379,#1381,.T.);+#1379=VERTEX_POINT('',#1380);+#1380=CARTESIAN_POINT('',(-4.148480775301,1.7,1.407364817767));+#1381=CIRCLE('',#1382,0.1);+#1382=AXIS2_PLACEMENT_3D('',#1383,#956,#13);+#1383=CARTESIAN_POINT('',(-4.05,1.7,1.39));+#1384=ORIENTED_EDGE('',*,*,#1385,.T.);+#1385=EDGE_CURVE('',#1379,#1386,#1388,.T.);+#1386=VERTEX_POINT('',#1387);+#1387=CARTESIAN_POINT('',(-4.341920041057,1.7,0.27269610137));+#1388=LINE('',#1380,#962);+#1389=ORIENTED_EDGE('',*,*,#1390,.T.);+#1390=EDGE_CURVE('',#1386,#1391,#1393,.T.);+#1391=VERTEX_POINT('',#1392);+#1392=CARTESIAN_POINT('',(-4.666906599551,1.7,1.665334536938E-16));+#1393=CIRCLE('',#1394,0.33);+#1394=AXIS2_PLACEMENT_3D('',#1395,#971,#972);+#1395=CARTESIAN_POINT('',(-4.666906599551,1.7,0.33));+#1396=ORIENTED_EDGE('',*,*,#1397,.T.);+#1397=EDGE_CURVE('',#1391,#1398,#1400,.T.);+#1398=VERTEX_POINT('',#1399);+#1399=CARTESIAN_POINT('',(-5.75,1.7,1.665334536938E-16));+#1400=LINE('',#1392,#385);+#1401=ORIENTED_EDGE('',*,*,#1402,.T.);+#1402=EDGE_CURVE('',#1398,#1403,#1405,.T.);+#1403=VERTEX_POINT('',#1404);+#1404=CARTESIAN_POINT('',(-5.75,1.7,0.23));+#1405=LINE('',#1399,#371);+#1406=ORIENTED_EDGE('',*,*,#1407,.T.);+#1407=EDGE_CURVE('',#1403,#1408,#1410,.T.);+#1408=VERTEX_POINT('',#1409);+#1409=CARTESIAN_POINT('',(-4.666906599551,1.7,0.23));+#1410=LINE('',#1404,#335);+#1411=ORIENTED_EDGE('',*,*,#1412,.T.);+#1412=EDGE_CURVE('',#1408,#1413,#1415,.T.);+#1413=VERTEX_POINT('',#1414);+#1414=CARTESIAN_POINT('',(-4.56842582425,1.7,0.312635182233));+#1415=CIRCLE('',#1416,1.E-01);+#1416=AXIS2_PLACEMENT_3D('',#1395,#994,#995);+#1417=ORIENTED_EDGE('',*,*,#1418,.T.);+#1418=EDGE_CURVE('',#1413,#1419,#1421,.T.);+#1419=VERTEX_POINT('',#1420);+#1420=CARTESIAN_POINT('',(-4.374986558494,1.7,1.44730389863));+#1421=LINE('',#1414,#1001);+#1422=ORIENTED_EDGE('',*,*,#1423,.T.);+#1423=EDGE_CURVE('',#1419,#741,#1424,.T.);+#1424=CIRCLE('',#1425,0.33);+#1425=AXIS2_PLACEMENT_3D('',#1383,#1008,#1009);+#1426=ORIENTED_EDGE('',*,*,#740,.T.);+#1427=PLANE('',#1428);+#1428=AXIS2_PLACEMENT_3D('',#1429,#398,#13);+#1429=CARTESIAN_POINT('',(-4.57314551832,1.7,0.725591846374));+#1430=ADVANCED_FACE('',(#1431),#1445,.F.);+#1431=FACE_BOUND('',#1432,.F.);+#1432=EDGE_LOOP('',(#1433,#1434,#1441,#1444));+#1433=ORIENTED_EDGE('',*,*,#514,.T.);+#1434=ORIENTED_EDGE('',*,*,#1435,.T.);+#1435=EDGE_CURVE('',#509,#1436,#1438,.T.);+#1436=VERTEX_POINT('',#1437);+#1437=CARTESIAN_POINT('',(-4.148480775301,2.11,1.407364817767));+#1438=CIRCLE('',#1439,0.1);+#1439=AXIS2_PLACEMENT_3D('',#1440,#956,#13);+#1440=CARTESIAN_POINT('',(-4.05,2.11,1.39));+#1441=ORIENTED_EDGE('',*,*,#1442,.F.);+#1442=EDGE_CURVE('',#1379,#1436,#1443,.T.);+#1443=LINE('',#1380,#397);+#1444=ORIENTED_EDGE('',*,*,#1378,.F.);+#1445=CYLINDRICAL_SURFACE('',#1382,0.1);+#1446=ADVANCED_FACE('',(#1447),#1491,.T.);+#1447=FACE_BOUND('',#1448,.T.);+#1448=EDGE_LOOP('',(#521,#507,#1434,#1449,#1454,#1461,#1466,#1471,#1476,#1482,#1487,#748));+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1436,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(-4.341920041057,2.11,0.27269610137));+#1453=LINE('',#1437,#962);+#1454=ORIENTED_EDGE('',*,*,#1455,.T.);+#1455=EDGE_CURVE('',#1451,#1456,#1458,.T.);+#1456=VERTEX_POINT('',#1457);+#1457=CARTESIAN_POINT('',(-4.666906599551,2.11,1.665334536938E-16));+#1458=CIRCLE('',#1459,0.33);+#1459=AXIS2_PLACEMENT_3D('',#1460,#971,#972);+#1460=CARTESIAN_POINT('',(-4.666906599551,2.11,0.33));+#1461=ORIENTED_EDGE('',*,*,#1462,.T.);+#1462=EDGE_CURVE('',#1456,#1463,#1465,.T.);+#1463=VERTEX_POINT('',#1464);+#1464=CARTESIAN_POINT('',(-5.75,2.11,1.665334536938E-16));+#1465=LINE('',#1457,#385);+#1466=ORIENTED_EDGE('',*,*,#1467,.T.);+#1467=EDGE_CURVE('',#1463,#1468,#1470,.T.);+#1468=VERTEX_POINT('',#1469);+#1469=CARTESIAN_POINT('',(-5.75,2.11,0.23));+#1470=LINE('',#1464,#371);+#1471=ORIENTED_EDGE('',*,*,#1472,.T.);+#1472=EDGE_CURVE('',#1468,#1473,#1475,.T.);+#1473=VERTEX_POINT('',#1474);+#1474=CARTESIAN_POINT('',(-4.666906599551,2.11,0.23));+#1475=LINE('',#1469,#335);+#1476=ORIENTED_EDGE('',*,*,#1477,.T.);+#1477=EDGE_CURVE('',#1473,#1478,#1480,.T.);+#1478=VERTEX_POINT('',#1479);+#1479=CARTESIAN_POINT('',(-4.56842582425,2.11,0.312635182233));+#1480=CIRCLE('',#1481,1.E-01);+#1481=AXIS2_PLACEMENT_3D('',#1460,#994,#995);+#1482=ORIENTED_EDGE('',*,*,#1483,.T.);+#1483=EDGE_CURVE('',#1478,#1484,#1486,.T.);+#1484=VERTEX_POINT('',#1485);+#1485=CARTESIAN_POINT('',(-4.374986558494,2.11,1.44730389863));+#1486=LINE('',#1479,#1001);+#1487=ORIENTED_EDGE('',*,*,#1488,.T.);+#1488=EDGE_CURVE('',#1484,#746,#1489,.T.);+#1489=CIRCLE('',#1490,0.33);+#1490=AXIS2_PLACEMENT_3D('',#1440,#1008,#1009);+#1491=PLANE('',#1492);+#1492=AXIS2_PLACEMENT_3D('',#1493,#398,#13);+#1493=CARTESIAN_POINT('',(-4.57314551832,2.11,0.725591846374));+#1494=ADVANCED_FACE('',(#1495),#1556,.F.);+#1495=FACE_BOUND('',#1496,.F.);+#1496=EDGE_LOOP('',(#1497,#1498,#1499,#1506,#1513,#1521,#1526,#1531,#1536,#1543,#1550,#1555));+#1497=ORIENTED_EDGE('',*,*,#534,.F.);+#1498=ORIENTED_EDGE('',*,*,#544,.T.);+#1499=ORIENTED_EDGE('',*,*,#1500,.T.);+#1500=EDGE_CURVE('',#545,#1501,#1503,.T.);+#1501=VERTEX_POINT('',#1502);+#1502=CARTESIAN_POINT('',(4.148480775301,2.11,1.407364817767));+#1503=CIRCLE('',#1504,0.1);+#1504=AXIS2_PLACEMENT_3D('',#1505,#87,#13);+#1505=CARTESIAN_POINT('',(4.05,2.11,1.39));+#1506=ORIENTED_EDGE('',*,*,#1507,.T.);+#1507=EDGE_CURVE('',#1501,#1508,#1510,.T.);+#1508=VERTEX_POINT('',#1509);+#1509=CARTESIAN_POINT('',(4.341920041057,2.11,0.27269610137));+#1510=LINE('',#1502,#1511);+#1511=VECTOR('',#1512,1.);+#1512=DIRECTION('',(0.168056154428,1.865798120761E-17,-0.98577742364));+#1513=ORIENTED_EDGE('',*,*,#1514,.T.);+#1514=EDGE_CURVE('',#1508,#1515,#1517,.T.);+#1515=VERTEX_POINT('',#1516);+#1516=CARTESIAN_POINT('',(4.666906599551,2.11,1.665334536938E-16));+#1517=CIRCLE('',#1518,0.33);+#1518=AXIS2_PLACEMENT_3D('',#1519,#59,#1520);+#1519=CARTESIAN_POINT('',(4.666906599551,2.11,0.33));+#1520=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#1521=ORIENTED_EDGE('',*,*,#1522,.T.);+#1522=EDGE_CURVE('',#1515,#1523,#1525,.T.);+#1523=VERTEX_POINT('',#1524);+#1524=CARTESIAN_POINT('',(5.75,2.11,1.665334536938E-16));+#1525=LINE('',#1516,#27);+#1526=ORIENTED_EDGE('',*,*,#1527,.T.);+#1527=EDGE_CURVE('',#1523,#1528,#1530,.T.);+#1528=VERTEX_POINT('',#1529);+#1529=CARTESIAN_POINT('',(5.75,2.11,0.23));+#1530=LINE('',#1524,#371);+#1531=ORIENTED_EDGE('',*,*,#1532,.T.);+#1532=EDGE_CURVE('',#1528,#1533,#1535,.T.);+#1533=VERTEX_POINT('',#1534);+#1534=CARTESIAN_POINT('',(4.666906599551,2.11,0.23));+#1535=LINE('',#1529,#72);+#1536=ORIENTED_EDGE('',*,*,#1537,.T.);+#1537=EDGE_CURVE('',#1533,#1538,#1540,.T.);+#1538=VERTEX_POINT('',#1539);+#1539=CARTESIAN_POINT('',(4.56842582425,2.11,0.312635182233));+#1540=CIRCLE('',#1541,1.E-01);+#1541=AXIS2_PLACEMENT_3D('',#1519,#87,#1542);+#1542=DIRECTION('',(1.7763568394E-14,1.972152263053E-30,-1.));+#1543=ORIENTED_EDGE('',*,*,#1544,.T.);+#1544=EDGE_CURVE('',#1538,#1545,#1547,.T.);+#1545=VERTEX_POINT('',#1546);+#1546=CARTESIAN_POINT('',(4.374986558494,2.11,1.44730389863));+#1547=LINE('',#1539,#1548);+#1548=VECTOR('',#1549,1.);+#1549=DIRECTION('',(-0.168056154428,-1.865798120761E-17,0.98577742364));+#1550=ORIENTED_EDGE('',*,*,#1551,.T.);+#1551=EDGE_CURVE('',#1545,#898,#1552,.T.);+#1552=CIRCLE('',#1553,0.33);+#1553=AXIS2_PLACEMENT_3D('',#1505,#59,#1554);+#1554=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#1555=ORIENTED_EDGE('',*,*,#897,.T.);+#1556=PLANE('',#1557);+#1557=AXIS2_PLACEMENT_3D('',#1558,#59,#13);+#1558=CARTESIAN_POINT('',(4.57314551832,2.11,0.725591846374));+#1559=ADVANCED_FACE('',(#1560),#1574,.F.);+#1560=FACE_BOUND('',#1561,.F.);+#1561=EDGE_LOOP('',(#1562,#1563,#1570,#1573));+#1562=ORIENTED_EDGE('',*,*,#557,.T.);+#1563=ORIENTED_EDGE('',*,*,#1564,.T.);+#1564=EDGE_CURVE('',#552,#1565,#1567,.T.);+#1565=VERTEX_POINT('',#1566);+#1566=CARTESIAN_POINT('',(4.148480775301,1.7,1.407364817767));+#1567=CIRCLE('',#1568,0.1);+#1568=AXIS2_PLACEMENT_3D('',#1569,#87,#13);+#1569=CARTESIAN_POINT('',(4.05,1.7,1.39));+#1570=ORIENTED_EDGE('',*,*,#1571,.F.);+#1571=EDGE_CURVE('',#1501,#1565,#1572,.T.);+#1572=LINE('',#1502,#58);+#1573=ORIENTED_EDGE('',*,*,#1500,.F.);+#1574=CYLINDRICAL_SURFACE('',#1504,0.1);+#1575=ADVANCED_FACE('',(#1576),#1620,.T.);+#1576=FACE_BOUND('',#1577,.T.);+#1577=EDGE_LOOP('',(#564,#550,#1563,#1578,#1583,#1590,#1595,#1600,#1605,#1611,#1616,#904));+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#1565,#1580,#1582,.T.);+#1580=VERTEX_POINT('',#1581);+#1581=CARTESIAN_POINT('',(4.341920041057,1.7,0.27269610137));+#1582=LINE('',#1566,#1511);+#1583=ORIENTED_EDGE('',*,*,#1584,.T.);+#1584=EDGE_CURVE('',#1580,#1585,#1587,.T.);+#1585=VERTEX_POINT('',#1586);+#1586=CARTESIAN_POINT('',(4.666906599551,1.7,1.665334536938E-16));+#1587=CIRCLE('',#1588,0.33);+#1588=AXIS2_PLACEMENT_3D('',#1589,#59,#1520);+#1589=CARTESIAN_POINT('',(4.666906599551,1.7,0.33));+#1590=ORIENTED_EDGE('',*,*,#1591,.T.);+#1591=EDGE_CURVE('',#1585,#1592,#1594,.T.);+#1592=VERTEX_POINT('',#1593);+#1593=CARTESIAN_POINT('',(5.75,1.7,1.665334536938E-16));+#1594=LINE('',#1586,#27);+#1595=ORIENTED_EDGE('',*,*,#1596,.T.);+#1596=EDGE_CURVE('',#1592,#1597,#1599,.T.);+#1597=VERTEX_POINT('',#1598);+#1598=CARTESIAN_POINT('',(5.75,1.7,0.23));+#1599=LINE('',#1593,#371);+#1600=ORIENTED_EDGE('',*,*,#1601,.T.);+#1601=EDGE_CURVE('',#1597,#1602,#1604,.T.);+#1602=VERTEX_POINT('',#1603);+#1603=CARTESIAN_POINT('',(4.666906599551,1.7,0.23));+#1604=LINE('',#1598,#72);+#1605=ORIENTED_EDGE('',*,*,#1606,.T.);+#1606=EDGE_CURVE('',#1602,#1607,#1609,.T.);+#1607=VERTEX_POINT('',#1608);+#1608=CARTESIAN_POINT('',(4.56842582425,1.7,0.312635182233));+#1609=CIRCLE('',#1610,1.E-01);+#1610=AXIS2_PLACEMENT_3D('',#1589,#87,#1542);+#1611=ORIENTED_EDGE('',*,*,#1612,.T.);+#1612=EDGE_CURVE('',#1607,#1613,#1615,.T.);+#1613=VERTEX_POINT('',#1614);+#1614=CARTESIAN_POINT('',(4.374986558494,1.7,1.44730389863));+#1615=LINE('',#1608,#1548);+#1616=ORIENTED_EDGE('',*,*,#1617,.T.);+#1617=EDGE_CURVE('',#1613,#901,#1618,.T.);+#1618=CIRCLE('',#1619,0.33);+#1619=AXIS2_PLACEMENT_3D('',#1569,#59,#1554);+#1620=PLANE('',#1621);+#1621=AXIS2_PLACEMENT_3D('',#1622,#59,#13);+#1622=CARTESIAN_POINT('',(4.57314551832,1.7,0.725591846374));+#1623=ADVANCED_FACE('',(#1624),#341,.F.);+#1624=FACE_BOUND('',#1625,.F.);+#1625=EDGE_LOOP('',(#1626,#1627,#1628,#1632));+#1626=ORIENTED_EDGE('',*,*,#908,.F.);+#1627=ORIENTED_EDGE('',*,*,#578,.T.);+#1628=ORIENTED_EDGE('',*,*,#1629,.T.);+#1629=EDGE_CURVE('',#573,#857,#1630,.T.);+#1630=LINE('',#1631,#72);+#1631=CARTESIAN_POINT('',(4.05,0.84,1.72));+#1632=ORIENTED_EDGE('',*,*,#856,.F.);+#1633=ADVANCED_FACE('',(#1634),#1690,.F.);+#1634=FACE_BOUND('',#1635,.F.);+#1635=EDGE_LOOP('',(#1636,#1637,#1638,#1645,#1650,#1657,#1662,#1667,#1672,#1678,#1683,#1688));+#1636=ORIENTED_EDGE('',*,*,#572,.F.);+#1637=ORIENTED_EDGE('',*,*,#583,.T.);+#1638=ORIENTED_EDGE('',*,*,#1639,.T.);+#1639=EDGE_CURVE('',#584,#1640,#1642,.T.);+#1640=VERTEX_POINT('',#1641);+#1641=CARTESIAN_POINT('',(4.148480775301,0.84,1.407364817767));+#1642=CIRCLE('',#1643,0.1);+#1643=AXIS2_PLACEMENT_3D('',#1644,#87,#13);+#1644=CARTESIAN_POINT('',(4.05,0.84,1.39));+#1645=ORIENTED_EDGE('',*,*,#1646,.T.);+#1646=EDGE_CURVE('',#1640,#1647,#1649,.T.);+#1647=VERTEX_POINT('',#1648);+#1648=CARTESIAN_POINT('',(4.341920041057,0.84,0.27269610137));+#1649=LINE('',#1641,#1511);+#1650=ORIENTED_EDGE('',*,*,#1651,.T.);+#1651=EDGE_CURVE('',#1647,#1652,#1654,.T.);+#1652=VERTEX_POINT('',#1653);+#1653=CARTESIAN_POINT('',(4.666906599551,0.84,1.665334536938E-16));+#1654=CIRCLE('',#1655,0.33);+#1655=AXIS2_PLACEMENT_3D('',#1656,#59,#1520);+#1656=CARTESIAN_POINT('',(4.666906599551,0.84,0.33));+#1657=ORIENTED_EDGE('',*,*,#1658,.T.);+#1658=EDGE_CURVE('',#1652,#1659,#1661,.T.);+#1659=VERTEX_POINT('',#1660);+#1660=CARTESIAN_POINT('',(5.75,0.84,1.665334536938E-16));+#1661=LINE('',#1653,#27);+#1662=ORIENTED_EDGE('',*,*,#1663,.T.);+#1663=EDGE_CURVE('',#1659,#1664,#1666,.T.);+#1664=VERTEX_POINT('',#1665);+#1665=CARTESIAN_POINT('',(5.75,0.84,0.23));+#1666=LINE('',#1660,#371);+#1667=ORIENTED_EDGE('',*,*,#1668,.T.);+#1668=EDGE_CURVE('',#1664,#1669,#1671,.T.);+#1669=VERTEX_POINT('',#1670);+#1670=CARTESIAN_POINT('',(4.666906599551,0.84,0.23));+#1671=LINE('',#1665,#72);+#1672=ORIENTED_EDGE('',*,*,#1673,.T.);+#1673=EDGE_CURVE('',#1669,#1674,#1676,.T.);+#1674=VERTEX_POINT('',#1675);+#1675=CARTESIAN_POINT('',(4.56842582425,0.84,0.312635182233));+#1676=CIRCLE('',#1677,1.E-01);+#1677=AXIS2_PLACEMENT_3D('',#1656,#87,#1542);+#1678=ORIENTED_EDGE('',*,*,#1679,.T.);+#1679=EDGE_CURVE('',#1674,#1680,#1682,.T.);+#1680=VERTEX_POINT('',#1681);+#1681=CARTESIAN_POINT('',(4.374986558494,0.84,1.44730389863));+#1682=LINE('',#1675,#1548);+#1683=ORIENTED_EDGE('',*,*,#1684,.T.);+#1684=EDGE_CURVE('',#1680,#1685,#1686,.T.);+#1685=VERTEX_POINT('',#1631);+#1686=CIRCLE('',#1687,0.33);+#1687=AXIS2_PLACEMENT_3D('',#1644,#59,#1554);+#1688=ORIENTED_EDGE('',*,*,#1689,.T.);+#1689=EDGE_CURVE('',#1685,#573,#1630,.T.);+#1690=PLANE('',#1691);+#1691=AXIS2_PLACEMENT_3D('',#1692,#59,#13);+#1692=CARTESIAN_POINT('',(4.57314551832,0.84,0.725591846374));+#1693=ADVANCED_FACE('',(#1694),#1708,.F.);+#1694=FACE_BOUND('',#1695,.F.);+#1695=EDGE_LOOP('',(#1696,#1697,#1704,#1707));+#1696=ORIENTED_EDGE('',*,*,#596,.T.);+#1697=ORIENTED_EDGE('',*,*,#1698,.T.);+#1698=EDGE_CURVE('',#591,#1699,#1701,.T.);+#1699=VERTEX_POINT('',#1700);+#1700=CARTESIAN_POINT('',(4.148480775301,0.43,1.407364817767));+#1701=CIRCLE('',#1702,0.1);+#1702=AXIS2_PLACEMENT_3D('',#1703,#87,#13);+#1703=CARTESIAN_POINT('',(4.05,0.43,1.39));+#1704=ORIENTED_EDGE('',*,*,#1705,.F.);+#1705=EDGE_CURVE('',#1640,#1699,#1706,.T.);+#1706=LINE('',#1641,#58);+#1707=ORIENTED_EDGE('',*,*,#1639,.F.);+#1708=CYLINDRICAL_SURFACE('',#1643,0.1);+#1709=ADVANCED_FACE('',(#1710),#1759,.T.);+#1710=FACE_BOUND('',#1711,.T.);+#1711=EDGE_LOOP('',(#603,#589,#1697,#1712,#1717,#1724,#1729,#1734,#1739,#1745,#1750,#1756));+#1712=ORIENTED_EDGE('',*,*,#1713,.T.);+#1713=EDGE_CURVE('',#1699,#1714,#1716,.T.);+#1714=VERTEX_POINT('',#1715);+#1715=CARTESIAN_POINT('',(4.341920041057,0.43,0.27269610137));+#1716=LINE('',#1700,#1511);+#1717=ORIENTED_EDGE('',*,*,#1718,.T.);+#1718=EDGE_CURVE('',#1714,#1719,#1721,.T.);+#1719=VERTEX_POINT('',#1720);+#1720=CARTESIAN_POINT('',(4.666906599551,0.43,1.665334536938E-16));+#1721=CIRCLE('',#1722,0.33);+#1722=AXIS2_PLACEMENT_3D('',#1723,#59,#1520);+#1723=CARTESIAN_POINT('',(4.666906599551,0.43,0.33));+#1724=ORIENTED_EDGE('',*,*,#1725,.T.);+#1725=EDGE_CURVE('',#1719,#1726,#1728,.T.);+#1726=VERTEX_POINT('',#1727);+#1727=CARTESIAN_POINT('',(5.75,0.43,1.665334536938E-16));+#1728=LINE('',#1720,#27);+#1729=ORIENTED_EDGE('',*,*,#1730,.T.);+#1730=EDGE_CURVE('',#1726,#1731,#1733,.T.);+#1731=VERTEX_POINT('',#1732);+#1732=CARTESIAN_POINT('',(5.75,0.43,0.23));+#1733=LINE('',#1727,#371);+#1734=ORIENTED_EDGE('',*,*,#1735,.T.);+#1735=EDGE_CURVE('',#1731,#1736,#1738,.T.);+#1736=VERTEX_POINT('',#1737);+#1737=CARTESIAN_POINT('',(4.666906599551,0.43,0.23));+#1738=LINE('',#1732,#72);+#1739=ORIENTED_EDGE('',*,*,#1740,.T.);+#1740=EDGE_CURVE('',#1736,#1741,#1743,.T.);+#1741=VERTEX_POINT('',#1742);+#1742=CARTESIAN_POINT('',(4.56842582425,0.43,0.312635182233));+#1743=CIRCLE('',#1744,1.E-01);+#1744=AXIS2_PLACEMENT_3D('',#1723,#87,#1542);+#1745=ORIENTED_EDGE('',*,*,#1746,.T.);+#1746=EDGE_CURVE('',#1741,#1747,#1749,.T.);+#1747=VERTEX_POINT('',#1748);+#1748=CARTESIAN_POINT('',(4.374986558494,0.43,1.44730389863));+#1749=LINE('',#1742,#1548);+#1750=ORIENTED_EDGE('',*,*,#1751,.T.);+#1751=EDGE_CURVE('',#1747,#1752,#1754,.T.);+#1752=VERTEX_POINT('',#1753);+#1753=CARTESIAN_POINT('',(4.05,0.43,1.72));+#1754=CIRCLE('',#1755,0.33);+#1755=AXIS2_PLACEMENT_3D('',#1703,#59,#1554);+#1756=ORIENTED_EDGE('',*,*,#1757,.T.);+#1757=EDGE_CURVE('',#1752,#605,#1758,.T.);+#1758=LINE('',#1753,#72);+#1759=PLANE('',#1760);+#1760=AXIS2_PLACEMENT_3D('',#1761,#59,#13);+#1761=CARTESIAN_POINT('',(4.57314551832,0.43,0.725591846374));+#1762=ADVANCED_FACE('',(#1763),#341,.F.);+#1763=FACE_BOUND('',#1764,.F.);+#1764=EDGE_LOOP('',(#1765,#1767,#1768,#1772));+#1765=ORIENTED_EDGE('',*,*,#1766,.F.);+#1766=EDGE_CURVE('',#605,#861,#1758,.T.);+#1767=ORIENTED_EDGE('',*,*,#617,.T.);+#1768=ORIENTED_EDGE('',*,*,#1769,.T.);+#1769=EDGE_CURVE('',#612,#865,#1770,.T.);+#1770=LINE('',#1771,#72);+#1771=CARTESIAN_POINT('',(4.05,-0.43,1.72));+#1772=ORIENTED_EDGE('',*,*,#864,.F.);+#1773=ADVANCED_FACE('',(#1774),#1830,.F.);+#1774=FACE_BOUND('',#1775,.F.);+#1775=EDGE_LOOP('',(#1776,#1777,#1778,#1785,#1790,#1797,#1802,#1807,#1812,#1818,#1823,#1828));+#1776=ORIENTED_EDGE('',*,*,#611,.F.);+#1777=ORIENTED_EDGE('',*,*,#622,.T.);+#1778=ORIENTED_EDGE('',*,*,#1779,.T.);+#1779=EDGE_CURVE('',#623,#1780,#1782,.T.);+#1780=VERTEX_POINT('',#1781);+#1781=CARTESIAN_POINT('',(4.148480775301,-0.43,1.407364817767));+#1782=CIRCLE('',#1783,0.1);+#1783=AXIS2_PLACEMENT_3D('',#1784,#87,#13);+#1784=CARTESIAN_POINT('',(4.05,-0.43,1.39));+#1785=ORIENTED_EDGE('',*,*,#1786,.T.);+#1786=EDGE_CURVE('',#1780,#1787,#1789,.T.);+#1787=VERTEX_POINT('',#1788);+#1788=CARTESIAN_POINT('',(4.341920041057,-0.43,0.27269610137));+#1789=LINE('',#1781,#1511);+#1790=ORIENTED_EDGE('',*,*,#1791,.T.);+#1791=EDGE_CURVE('',#1787,#1792,#1794,.T.);+#1792=VERTEX_POINT('',#1793);+#1793=CARTESIAN_POINT('',(4.666906599551,-0.43,1.665334536938E-16));+#1794=CIRCLE('',#1795,0.33);+#1795=AXIS2_PLACEMENT_3D('',#1796,#59,#1520);+#1796=CARTESIAN_POINT('',(4.666906599551,-0.43,0.33));+#1797=ORIENTED_EDGE('',*,*,#1798,.T.);+#1798=EDGE_CURVE('',#1792,#1799,#1801,.T.);+#1799=VERTEX_POINT('',#1800);+#1800=CARTESIAN_POINT('',(5.75,-0.43,1.665334536938E-16));+#1801=LINE('',#1793,#27);+#1802=ORIENTED_EDGE('',*,*,#1803,.T.);+#1803=EDGE_CURVE('',#1799,#1804,#1806,.T.);+#1804=VERTEX_POINT('',#1805);+#1805=CARTESIAN_POINT('',(5.75,-0.43,0.23));+#1806=LINE('',#1800,#371);+#1807=ORIENTED_EDGE('',*,*,#1808,.T.);+#1808=EDGE_CURVE('',#1804,#1809,#1811,.T.);+#1809=VERTEX_POINT('',#1810);+#1810=CARTESIAN_POINT('',(4.666906599551,-0.43,0.23));+#1811=LINE('',#1805,#72);+#1812=ORIENTED_EDGE('',*,*,#1813,.T.);+#1813=EDGE_CURVE('',#1809,#1814,#1816,.T.);+#1814=VERTEX_POINT('',#1815);+#1815=CARTESIAN_POINT('',(4.56842582425,-0.43,0.312635182233));+#1816=CIRCLE('',#1817,1.E-01);+#1817=AXIS2_PLACEMENT_3D('',#1796,#87,#1542);+#1818=ORIENTED_EDGE('',*,*,#1819,.T.);+#1819=EDGE_CURVE('',#1814,#1820,#1822,.T.);+#1820=VERTEX_POINT('',#1821);+#1821=CARTESIAN_POINT('',(4.374986558494,-0.43,1.44730389863));+#1822=LINE('',#1815,#1548);+#1823=ORIENTED_EDGE('',*,*,#1824,.T.);+#1824=EDGE_CURVE('',#1820,#1825,#1826,.T.);+#1825=VERTEX_POINT('',#1771);+#1826=CIRCLE('',#1827,0.33);+#1827=AXIS2_PLACEMENT_3D('',#1784,#59,#1554);+#1828=ORIENTED_EDGE('',*,*,#1829,.T.);+#1829=EDGE_CURVE('',#1825,#612,#1770,.T.);+#1830=PLANE('',#1831);+#1831=AXIS2_PLACEMENT_3D('',#1832,#59,#13);+#1832=CARTESIAN_POINT('',(4.57314551832,-0.43,0.725591846374));+#1833=ADVANCED_FACE('',(#1834),#1848,.F.);+#1834=FACE_BOUND('',#1835,.F.);+#1835=EDGE_LOOP('',(#1836,#1837,#1844,#1847));+#1836=ORIENTED_EDGE('',*,*,#635,.T.);+#1837=ORIENTED_EDGE('',*,*,#1838,.T.);+#1838=EDGE_CURVE('',#630,#1839,#1841,.T.);+#1839=VERTEX_POINT('',#1840);+#1840=CARTESIAN_POINT('',(4.148480775301,-0.84,1.407364817767));+#1841=CIRCLE('',#1842,0.1);+#1842=AXIS2_PLACEMENT_3D('',#1843,#87,#13);+#1843=CARTESIAN_POINT('',(4.05,-0.84,1.39));+#1844=ORIENTED_EDGE('',*,*,#1845,.F.);+#1845=EDGE_CURVE('',#1780,#1839,#1846,.T.);+#1846=LINE('',#1781,#58);+#1847=ORIENTED_EDGE('',*,*,#1779,.F.);+#1848=CYLINDRICAL_SURFACE('',#1783,0.1);+#1849=ADVANCED_FACE('',(#1850),#1899,.T.);+#1850=FACE_BOUND('',#1851,.T.);+#1851=EDGE_LOOP('',(#642,#628,#1837,#1852,#1857,#1864,#1869,#1874,#1879,#1885,#1890,#1896));+#1852=ORIENTED_EDGE('',*,*,#1853,.T.);+#1853=EDGE_CURVE('',#1839,#1854,#1856,.T.);+#1854=VERTEX_POINT('',#1855);+#1855=CARTESIAN_POINT('',(4.341920041057,-0.84,0.27269610137));+#1856=LINE('',#1840,#1511);+#1857=ORIENTED_EDGE('',*,*,#1858,.T.);+#1858=EDGE_CURVE('',#1854,#1859,#1861,.T.);+#1859=VERTEX_POINT('',#1860);+#1860=CARTESIAN_POINT('',(4.666906599551,-0.84,1.665334536938E-16));+#1861=CIRCLE('',#1862,0.33);+#1862=AXIS2_PLACEMENT_3D('',#1863,#59,#1520);+#1863=CARTESIAN_POINT('',(4.666906599551,-0.84,0.33));+#1864=ORIENTED_EDGE('',*,*,#1865,.T.);+#1865=EDGE_CURVE('',#1859,#1866,#1868,.T.);+#1866=VERTEX_POINT('',#1867);+#1867=CARTESIAN_POINT('',(5.75,-0.84,1.665334536938E-16));+#1868=LINE('',#1860,#27);+#1869=ORIENTED_EDGE('',*,*,#1870,.T.);+#1870=EDGE_CURVE('',#1866,#1871,#1873,.T.);+#1871=VERTEX_POINT('',#1872);+#1872=CARTESIAN_POINT('',(5.75,-0.84,0.23));+#1873=LINE('',#1867,#371);+#1874=ORIENTED_EDGE('',*,*,#1875,.T.);+#1875=EDGE_CURVE('',#1871,#1876,#1878,.T.);+#1876=VERTEX_POINT('',#1877);+#1877=CARTESIAN_POINT('',(4.666906599551,-0.84,0.23));+#1878=LINE('',#1872,#72);+#1879=ORIENTED_EDGE('',*,*,#1880,.T.);+#1880=EDGE_CURVE('',#1876,#1881,#1883,.T.);+#1881=VERTEX_POINT('',#1882);+#1882=CARTESIAN_POINT('',(4.56842582425,-0.84,0.312635182233));+#1883=CIRCLE('',#1884,1.E-01);+#1884=AXIS2_PLACEMENT_3D('',#1863,#87,#1542);+#1885=ORIENTED_EDGE('',*,*,#1886,.T.);+#1886=EDGE_CURVE('',#1881,#1887,#1889,.T.);+#1887=VERTEX_POINT('',#1888);+#1888=CARTESIAN_POINT('',(4.374986558494,-0.84,1.44730389863));+#1889=LINE('',#1882,#1548);+#1890=ORIENTED_EDGE('',*,*,#1891,.T.);+#1891=EDGE_CURVE('',#1887,#1892,#1894,.T.);+#1892=VERTEX_POINT('',#1893);+#1893=CARTESIAN_POINT('',(4.05,-0.84,1.72));+#1894=CIRCLE('',#1895,0.33);+#1895=AXIS2_PLACEMENT_3D('',#1843,#59,#1554);+#1896=ORIENTED_EDGE('',*,*,#1897,.T.);+#1897=EDGE_CURVE('',#1892,#644,#1898,.T.);+#1898=LINE('',#1893,#72);+#1899=PLANE('',#1900);+#1900=AXIS2_PLACEMENT_3D('',#1901,#59,#13);+#1901=CARTESIAN_POINT('',(4.57314551832,-0.84,0.725591846374));+#1902=ADVANCED_FACE('',(#1903),#341,.F.);+#1903=FACE_BOUND('',#1904,.F.);+#1904=EDGE_LOOP('',(#1905,#1907,#1908,#1912));+#1905=ORIENTED_EDGE('',*,*,#1906,.F.);+#1906=EDGE_CURVE('',#644,#869,#1898,.T.);+#1907=ORIENTED_EDGE('',*,*,#656,.T.);+#1908=ORIENTED_EDGE('',*,*,#1909,.T.);+#1909=EDGE_CURVE('',#651,#873,#1910,.T.);+#1910=LINE('',#1911,#72);+#1911=CARTESIAN_POINT('',(4.05,-1.7,1.72));+#1912=ORIENTED_EDGE('',*,*,#872,.F.);+#1913=ADVANCED_FACE('',(#1914),#1970,.F.);+#1914=FACE_BOUND('',#1915,.F.);+#1915=EDGE_LOOP('',(#1916,#1917,#1918,#1925,#1930,#1937,#1942,#1947,#1952,#1958,#1963,#1968));+#1916=ORIENTED_EDGE('',*,*,#650,.F.);+#1917=ORIENTED_EDGE('',*,*,#661,.T.);+#1918=ORIENTED_EDGE('',*,*,#1919,.T.);+#1919=EDGE_CURVE('',#662,#1920,#1922,.T.);+#1920=VERTEX_POINT('',#1921);+#1921=CARTESIAN_POINT('',(4.148480775301,-1.7,1.407364817767));+#1922=CIRCLE('',#1923,0.1);+#1923=AXIS2_PLACEMENT_3D('',#1924,#87,#13);+#1924=CARTESIAN_POINT('',(4.05,-1.7,1.39));+#1925=ORIENTED_EDGE('',*,*,#1926,.T.);+#1926=EDGE_CURVE('',#1920,#1927,#1929,.T.);+#1927=VERTEX_POINT('',#1928);+#1928=CARTESIAN_POINT('',(4.341920041057,-1.7,0.27269610137));+#1929=LINE('',#1921,#1511);+#1930=ORIENTED_EDGE('',*,*,#1931,.T.);+#1931=EDGE_CURVE('',#1927,#1932,#1934,.T.);+#1932=VERTEX_POINT('',#1933);+#1933=CARTESIAN_POINT('',(4.666906599551,-1.7,1.665334536938E-16));+#1934=CIRCLE('',#1935,0.33);+#1935=AXIS2_PLACEMENT_3D('',#1936,#59,#1520);+#1936=CARTESIAN_POINT('',(4.666906599551,-1.7,0.33));+#1937=ORIENTED_EDGE('',*,*,#1938,.T.);+#1938=EDGE_CURVE('',#1932,#1939,#1941,.T.);+#1939=VERTEX_POINT('',#1940);+#1940=CARTESIAN_POINT('',(5.75,-1.7,1.665334536938E-16));+#1941=LINE('',#1933,#27);+#1942=ORIENTED_EDGE('',*,*,#1943,.T.);+#1943=EDGE_CURVE('',#1939,#1944,#1946,.T.);+#1944=VERTEX_POINT('',#1945);+#1945=CARTESIAN_POINT('',(5.75,-1.7,0.23));+#1946=LINE('',#1940,#371);+#1947=ORIENTED_EDGE('',*,*,#1948,.T.);+#1948=EDGE_CURVE('',#1944,#1949,#1951,.T.);+#1949=VERTEX_POINT('',#1950);+#1950=CARTESIAN_POINT('',(4.666906599551,-1.7,0.23));+#1951=LINE('',#1945,#72);+#1952=ORIENTED_EDGE('',*,*,#1953,.T.);+#1953=EDGE_CURVE('',#1949,#1954,#1956,.T.);+#1954=VERTEX_POINT('',#1955);+#1955=CARTESIAN_POINT('',(4.56842582425,-1.7,0.312635182233));+#1956=CIRCLE('',#1957,1.E-01);+#1957=AXIS2_PLACEMENT_3D('',#1936,#87,#1542);+#1958=ORIENTED_EDGE('',*,*,#1959,.T.);+#1959=EDGE_CURVE('',#1954,#1960,#1962,.T.);+#1960=VERTEX_POINT('',#1961);+#1961=CARTESIAN_POINT('',(4.374986558494,-1.7,1.44730389863));+#1962=LINE('',#1955,#1548);+#1963=ORIENTED_EDGE('',*,*,#1964,.T.);+#1964=EDGE_CURVE('',#1960,#1965,#1966,.T.);+#1965=VERTEX_POINT('',#1911);+#1966=CIRCLE('',#1967,0.33);+#1967=AXIS2_PLACEMENT_3D('',#1924,#59,#1554);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#1965,#651,#1910,.T.);+#1970=PLANE('',#1971);+#1971=AXIS2_PLACEMENT_3D('',#1972,#59,#13);+#1972=CARTESIAN_POINT('',(4.57314551832,-1.7,0.725591846374));+#1973=ADVANCED_FACE('',(#1974),#1988,.F.);+#1974=FACE_BOUND('',#1975,.F.);+#1975=EDGE_LOOP('',(#1976,#1977,#1984,#1987));+#1976=ORIENTED_EDGE('',*,*,#674,.T.);+#1977=ORIENTED_EDGE('',*,*,#1978,.T.);+#1978=EDGE_CURVE('',#669,#1979,#1981,.T.);+#1979=VERTEX_POINT('',#1980);+#1980=CARTESIAN_POINT('',(4.148480775301,-2.11,1.407364817767));+#1981=CIRCLE('',#1982,0.1);+#1982=AXIS2_PLACEMENT_3D('',#1983,#87,#13);+#1983=CARTESIAN_POINT('',(4.05,-2.11,1.39));+#1984=ORIENTED_EDGE('',*,*,#1985,.F.);+#1985=EDGE_CURVE('',#1920,#1979,#1986,.T.);+#1986=LINE('',#1921,#58);+#1987=ORIENTED_EDGE('',*,*,#1919,.F.);+#1988=CYLINDRICAL_SURFACE('',#1923,0.1);+#1989=ADVANCED_FACE('',(#1990),#2037,.T.);+#1990=FACE_BOUND('',#1991,.T.);+#1991=EDGE_LOOP('',(#681,#667,#1977,#1992,#1997,#2004,#2009,#2014,#2019,#2025,#2030,#2035));+#1992=ORIENTED_EDGE('',*,*,#1993,.T.);+#1993=EDGE_CURVE('',#1979,#1994,#1996,.T.);+#1994=VERTEX_POINT('',#1995);+#1995=CARTESIAN_POINT('',(4.341920041057,-2.11,0.27269610137));+#1996=LINE('',#1980,#1511);+#1997=ORIENTED_EDGE('',*,*,#1998,.T.);+#1998=EDGE_CURVE('',#1994,#1999,#2001,.T.);+#1999=VERTEX_POINT('',#2000);+#2000=CARTESIAN_POINT('',(4.666906599551,-2.11,1.665334536938E-16));+#2001=CIRCLE('',#2002,0.33);+#2002=AXIS2_PLACEMENT_3D('',#2003,#59,#1520);+#2003=CARTESIAN_POINT('',(4.666906599551,-2.11,0.33));+#2004=ORIENTED_EDGE('',*,*,#2005,.T.);+#2005=EDGE_CURVE('',#1999,#2006,#2008,.T.);+#2006=VERTEX_POINT('',#2007);+#2007=CARTESIAN_POINT('',(5.75,-2.11,1.665334536938E-16));+#2008=LINE('',#2000,#27);+#2009=ORIENTED_EDGE('',*,*,#2010,.T.);+#2010=EDGE_CURVE('',#2006,#2011,#2013,.T.);+#2011=VERTEX_POINT('',#2012);+#2012=CARTESIAN_POINT('',(5.75,-2.11,0.23));+#2013=LINE('',#2007,#371);+#2014=ORIENTED_EDGE('',*,*,#2015,.T.);+#2015=EDGE_CURVE('',#2011,#2016,#2018,.T.);+#2016=VERTEX_POINT('',#2017);+#2017=CARTESIAN_POINT('',(4.666906599551,-2.11,0.23));+#2018=LINE('',#2012,#72);+#2019=ORIENTED_EDGE('',*,*,#2020,.T.);+#2020=EDGE_CURVE('',#2016,#2021,#2023,.T.);+#2021=VERTEX_POINT('',#2022);+#2022=CARTESIAN_POINT('',(4.56842582425,-2.11,0.312635182233));+#2023=CIRCLE('',#2024,1.E-01);+#2024=AXIS2_PLACEMENT_3D('',#2003,#87,#1542);+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#2021,#2027,#2029,.T.);+#2027=VERTEX_POINT('',#2028);+#2028=CARTESIAN_POINT('',(4.374986558494,-2.11,1.44730389863));+#2029=LINE('',#2022,#1548);+#2030=ORIENTED_EDGE('',*,*,#2031,.T.);+#2031=EDGE_CURVE('',#2027,#2032,#2033,.T.);+#2032=VERTEX_POINT('',#939);+#2033=CIRCLE('',#2034,0.33);+#2034=AXIS2_PLACEMENT_3D('',#1983,#59,#1554);+#2035=ORIENTED_EDGE('',*,*,#2036,.T.);+#2036=EDGE_CURVE('',#2032,#683,#938,.T.);+#2037=PLANE('',#2038);+#2038=AXIS2_PLACEMENT_3D('',#2039,#59,#13);+#2039=CARTESIAN_POINT('',(4.57314551832,-2.11,0.725591846374));+#2040=ADVANCED_FACE('',(#2041),#2048,.T.);+#2041=FACE_BOUND('',#2042,.F.);+#2042=EDGE_LOOP('',(#2043,#1487,#2046,#2047));+#2043=ORIENTED_EDGE('',*,*,#2044,.T.);+#2044=EDGE_CURVE('',#1419,#1484,#2045,.T.);+#2045=LINE('',#1420,#397);+#2046=ORIENTED_EDGE('',*,*,#745,.F.);+#2047=ORIENTED_EDGE('',*,*,#1423,.F.);+#2048=CYLINDRICAL_SURFACE('',#2049,0.33);+#2049=AXIS2_PLACEMENT_3D('',#1383,#956,#1009);+#2050=ADVANCED_FACE('',(#2051),#2060,.F.);+#2051=FACE_BOUND('',#2052,.F.);+#2052=EDGE_LOOP('',(#2053,#2054,#1078,#2057,#2058,#2059));+#2053=ORIENTED_EDGE('',*,*,#1011,.F.);+#2054=ORIENTED_EDGE('',*,*,#2055,.T.);+#2055=EDGE_CURVE('',#1005,#1074,#2056,.T.);+#2056=LINE('',#920,#397);+#2057=ORIENTED_EDGE('',*,*,#1094,.T.);+#2058=ORIENTED_EDGE('',*,*,#768,.F.);+#2059=ORIENTED_EDGE('',*,*,#918,.F.);+#2060=PLANE('',#2061);+#2061=AXIS2_PLACEMENT_3D('',#920,#95,#336);+#2062=ADVANCED_FACE('',(#2063),#2072,.F.);+#2063=FACE_BOUND('',#2064,.F.);+#2064=EDGE_LOOP('',(#2065,#2066,#1218,#2069,#2070,#2071));+#2065=ORIENTED_EDGE('',*,*,#1151,.F.);+#2066=ORIENTED_EDGE('',*,*,#2067,.T.);+#2067=EDGE_CURVE('',#1147,#1214,#2068,.T.);+#2068=LINE('',#1091,#397);+#2069=ORIENTED_EDGE('',*,*,#1234,.T.);+#2070=ORIENTED_EDGE('',*,*,#776,.F.);+#2071=ORIENTED_EDGE('',*,*,#1089,.F.);+#2072=PLANE('',#2073);+#2073=AXIS2_PLACEMENT_3D('',#1091,#95,#336);+#2074=ADVANCED_FACE('',(#2075),#2084,.F.);+#2075=FACE_BOUND('',#2076,.F.);+#2076=EDGE_LOOP('',(#2077,#2078,#1358,#2081,#2082,#2083));+#2077=ORIENTED_EDGE('',*,*,#1291,.F.);+#2078=ORIENTED_EDGE('',*,*,#2079,.T.);+#2079=EDGE_CURVE('',#1287,#1354,#2080,.T.);+#2080=LINE('',#1231,#397);+#2081=ORIENTED_EDGE('',*,*,#1371,.T.);+#2082=ORIENTED_EDGE('',*,*,#784,.F.);+#2083=ORIENTED_EDGE('',*,*,#1229,.F.);+#2084=PLANE('',#2085);+#2085=AXIS2_PLACEMENT_3D('',#1231,#95,#336);+#2086=ADVANCED_FACE('',(#2087,#2107),#2117,.F.);+#2087=FACE_BOUND('',#2088,.F.);+#2088=EDGE_LOOP('',(#2089,#2090,#2091,#2092,#2097,#2102,#2105,#2106));+#2089=ORIENTED_EDGE('',*,*,#829,.T.);+#2090=ORIENTED_EDGE('',*,*,#843,.T.);+#2091=ORIENTED_EDGE('',*,*,#889,.T.);+#2092=ORIENTED_EDGE('',*,*,#2093,.T.);+#2093=EDGE_CURVE('',#885,#2094,#2096,.T.);+#2094=VERTEX_POINT('',#2095);+#2095=CARTESIAN_POINT('',(3.461607949261,-2.698215898521,2.8));+#2096=LINE('',#886,#65);+#2097=ORIENTED_EDGE('',*,*,#2098,.T.);+#2098=EDGE_CURVE('',#2094,#2099,#2101,.T.);+#2099=VERTEX_POINT('',#2100);+#2100=CARTESIAN_POINT('',(-3.461607949261,-2.698215898521,2.8));+#2101=LINE('',#2095,#72);+#2102=ORIENTED_EDGE('',*,*,#2103,.T.);+#2103=EDGE_CURVE('',#2099,#798,#2104,.T.);+#2104=LINE('',#2100,#79);+#2105=ORIENTED_EDGE('',*,*,#797,.T.);+#2106=ORIENTED_EDGE('',*,*,#815,.T.);+#2107=FACE_BOUND('',#2108,.F.);+#2108=EDGE_LOOP('',(#2109));+#2109=ORIENTED_EDGE('',*,*,#2110,.F.);+#2110=EDGE_CURVE('',#2111,#2111,#2113,.T.);+#2111=VERTEX_POINT('',#2112);+#2112=CARTESIAN_POINT('',(-2.873215898521,1.748215898521,2.8));+#2113=CIRCLE('',#2114,0.3);+#2114=AXIS2_PLACEMENT_3D('',#2115,#2116,#59);+#2115=CARTESIAN_POINT('',(-2.873215898521,2.048215898521,2.8));+#2116=DIRECTION('',(0.,-0.,-1.));+#2117=PLANE('',#2118);+#2118=AXIS2_PLACEMENT_3D('',#812,#95,#2119);+#2119=DIRECTION('',(0.794715214822,-0.606982476956,0.));+#2120=ADVANCED_FACE('',(#2121),#2129,.F.);+#2121=FACE_BOUND('',#2122,.F.);+#2122=EDGE_LOOP('',(#2123,#2124,#2125,#2126));+#2123=ORIENTED_EDGE('',*,*,#923,.T.);+#2124=ORIENTED_EDGE('',*,*,#802,.T.);+#2125=ORIENTED_EDGE('',*,*,#2103,.F.);+#2126=ORIENTED_EDGE('',*,*,#2127,.F.);+#2127=EDGE_CURVE('',#924,#2099,#2128,.T.);+#2128=B_SPLINE_CURVE_WITH_KNOTS('',1,(#925,#2100),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2129=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#925,#2100),(#328,#799)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2130=ADVANCED_FACE('',(#2131),#2140,.F.);+#2131=FACE_BOUND('',#2132,.F.);+#2132=EDGE_LOOP('',(#2133,#2134,#1756,#2137,#2138,#2139));+#2133=ORIENTED_EDGE('',*,*,#1689,.F.);+#2134=ORIENTED_EDGE('',*,*,#2135,.T.);+#2135=EDGE_CURVE('',#1685,#1752,#2136,.T.);+#2136=LINE('',#1631,#58);+#2137=ORIENTED_EDGE('',*,*,#1766,.T.);+#2138=ORIENTED_EDGE('',*,*,#860,.F.);+#2139=ORIENTED_EDGE('',*,*,#1629,.F.);+#2140=PLANE('',#2141);+#2141=AXIS2_PLACEMENT_3D('',#1631,#95,#73);+#2142=ADVANCED_FACE('',(#2143),#2152,.F.);+#2143=FACE_BOUND('',#2144,.F.);+#2144=EDGE_LOOP('',(#2145,#2146,#1896,#2149,#2150,#2151));+#2145=ORIENTED_EDGE('',*,*,#1829,.F.);+#2146=ORIENTED_EDGE('',*,*,#2147,.T.);+#2147=EDGE_CURVE('',#1825,#1892,#2148,.T.);+#2148=LINE('',#1771,#58);+#2149=ORIENTED_EDGE('',*,*,#1906,.T.);+#2150=ORIENTED_EDGE('',*,*,#868,.F.);+#2151=ORIENTED_EDGE('',*,*,#1769,.F.);+#2152=PLANE('',#2153);+#2153=AXIS2_PLACEMENT_3D('',#1771,#95,#73);+#2154=ADVANCED_FACE('',(#2155),#2164,.F.);+#2155=FACE_BOUND('',#2156,.F.);+#2156=EDGE_LOOP('',(#2157,#2158,#2035,#2161,#2162,#2163));+#2157=ORIENTED_EDGE('',*,*,#1969,.F.);+#2158=ORIENTED_EDGE('',*,*,#2159,.T.);+#2159=EDGE_CURVE('',#1965,#2032,#2160,.T.);+#2160=LINE('',#1911,#58);+#2161=ORIENTED_EDGE('',*,*,#937,.T.);+#2162=ORIENTED_EDGE('',*,*,#876,.F.);+#2163=ORIENTED_EDGE('',*,*,#1909,.F.);+#2164=PLANE('',#2165);+#2165=AXIS2_PLACEMENT_3D('',#1911,#95,#73);+#2166=ADVANCED_FACE('',(#2167),#2175,.F.);+#2167=FACE_BOUND('',#2168,.F.);+#2168=EDGE_LOOP('',(#2169,#2170,#2173,#2174));+#2169=ORIENTED_EDGE('',*,*,#933,.T.);+#2170=ORIENTED_EDGE('',*,*,#2171,.T.);+#2171=EDGE_CURVE('',#929,#2094,#2172,.T.);+#2172=B_SPLINE_CURVE_WITH_KNOTS('',1,(#930,#2095),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2173=ORIENTED_EDGE('',*,*,#2093,.F.);+#2174=ORIENTED_EDGE('',*,*,#884,.F.);+#2175=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#882,#886),(#930,#2095)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2176=ADVANCED_FACE('',(#2177),#2184,.T.);+#2177=FACE_BOUND('',#2178,.F.);+#2178=EDGE_LOOP('',(#2179,#1616,#2182,#2183));+#2179=ORIENTED_EDGE('',*,*,#2180,.T.);+#2180=EDGE_CURVE('',#1545,#1613,#2181,.T.);+#2181=LINE('',#1546,#58);+#2182=ORIENTED_EDGE('',*,*,#900,.F.);+#2183=ORIENTED_EDGE('',*,*,#1551,.F.);+#2184=CYLINDRICAL_SURFACE('',#2185,0.33);+#2185=AXIS2_PLACEMENT_3D('',#1505,#87,#1554);+#2186=ADVANCED_FACE('',(#2187),#2193,.F.);+#2187=FACE_BOUND('',#2188,.F.);+#2188=EDGE_LOOP('',(#2189,#2190,#2191,#2192));+#2189=ORIENTED_EDGE('',*,*,#928,.T.);+#2190=ORIENTED_EDGE('',*,*,#2127,.T.);+#2191=ORIENTED_EDGE('',*,*,#2098,.F.);+#2192=ORIENTED_EDGE('',*,*,#2171,.F.);+#2193=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#930,#2095),(#925,#2100)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2194=ADVANCED_FACE('',(#2195),#2202,.T.);+#2195=FACE_BOUND('',#2196,.F.);+#2196=EDGE_LOOP('',(#2197,#1072,#2200,#2201));+#2197=ORIENTED_EDGE('',*,*,#2198,.T.);+#2198=EDGE_CURVE('',#998,#1069,#2199,.T.);+#2199=LINE('',#999,#397);+#2200=ORIENTED_EDGE('',*,*,#2055,.F.);+#2201=ORIENTED_EDGE('',*,*,#1004,.F.);+#2202=CYLINDRICAL_SURFACE('',#2203,0.33);+#2203=AXIS2_PLACEMENT_3D('',#955,#956,#1009);+#2204=ADVANCED_FACE('',(#2205),#2212,.F.);+#2205=FACE_BOUND('',#2206,.F.);+#2206=EDGE_LOOP('',(#2207,#1067,#2210,#2211));+#2207=ORIENTED_EDGE('',*,*,#2208,.T.);+#2208=EDGE_CURVE('',#990,#1063,#2209,.T.);+#2209=LINE('',#991,#397);+#2210=ORIENTED_EDGE('',*,*,#2198,.F.);+#2211=ORIENTED_EDGE('',*,*,#997,.F.);+#2212=PLANE('',#2213);+#2213=AXIS2_PLACEMENT_3D('',#991,#2214,#1002);+#2214=DIRECTION('',(0.98577742364,-1.127963736517E-17,-0.168056154428));+#2215=ADVANCED_FACE('',(#2216),#2223,.F.);+#2216=FACE_BOUND('',#2217,.F.);+#2217=EDGE_LOOP('',(#2218,#1061,#2221,#2222));+#2218=ORIENTED_EDGE('',*,*,#2219,.T.);+#2219=EDGE_CURVE('',#985,#1058,#2220,.T.);+#2220=LINE('',#986,#397);+#2221=ORIENTED_EDGE('',*,*,#2208,.F.);+#2222=ORIENTED_EDGE('',*,*,#989,.F.);+#2223=CYLINDRICAL_SURFACE('',#2224,1.E-01);+#2224=AXIS2_PLACEMENT_3D('',#970,#956,#995);+#2225=ADVANCED_FACE('',(#2226),#2233,.F.);+#2226=FACE_BOUND('',#2227,.F.);+#2227=EDGE_LOOP('',(#2228,#1056,#2231,#2232));+#2228=ORIENTED_EDGE('',*,*,#2229,.T.);+#2229=EDGE_CURVE('',#980,#1053,#2230,.T.);+#2230=LINE('',#981,#397);+#2231=ORIENTED_EDGE('',*,*,#2219,.F.);+#2232=ORIENTED_EDGE('',*,*,#984,.F.);+#2233=PLANE('',#2234);+#2234=AXIS2_PLACEMENT_3D('',#981,#95,#336);+#2235=ADVANCED_FACE('',(#2236),#2243,.F.);+#2236=FACE_BOUND('',#2237,.F.);+#2237=EDGE_LOOP('',(#2238,#1051,#2241,#2242));+#2238=ORIENTED_EDGE('',*,*,#2239,.T.);+#2239=EDGE_CURVE('',#975,#1048,#2240,.T.);+#2240=LINE('',#976,#397);+#2241=ORIENTED_EDGE('',*,*,#2229,.F.);+#2242=ORIENTED_EDGE('',*,*,#979,.F.);+#2243=PLANE('',#2244);+#2244=AXIS2_PLACEMENT_3D('',#976,#336,#13);+#2245=ADVANCED_FACE('',(#2246),#2253,.F.);+#2246=FACE_BOUND('',#2247,.F.);+#2247=EDGE_LOOP('',(#2248,#1046,#2251,#2252));+#2248=ORIENTED_EDGE('',*,*,#2249,.T.);+#2249=EDGE_CURVE('',#966,#1041,#2250,.T.);+#2250=LINE('',#967,#397);+#2251=ORIENTED_EDGE('',*,*,#2239,.F.);+#2252=ORIENTED_EDGE('',*,*,#974,.F.);+#2253=PLANE('',#2254);+#2254=AXIS2_PLACEMENT_3D('',#967,#13,#386);+#2255=ADVANCED_FACE('',(#2256),#2263,.T.);+#2256=FACE_BOUND('',#2257,.F.);+#2257=EDGE_LOOP('',(#2258,#1039,#2261,#2262));+#2258=ORIENTED_EDGE('',*,*,#2259,.T.);+#2259=EDGE_CURVE('',#959,#1036,#2260,.T.);+#2260=LINE('',#960,#397);+#2261=ORIENTED_EDGE('',*,*,#2249,.F.);+#2262=ORIENTED_EDGE('',*,*,#965,.F.);+#2263=CYLINDRICAL_SURFACE('',#2264,0.33);+#2264=AXIS2_PLACEMENT_3D('',#970,#956,#972);+#2265=ADVANCED_FACE('',(#2266),#2271,.F.);+#2266=FACE_BOUND('',#2267,.F.);+#2267=EDGE_LOOP('',(#2268,#1034,#2269,#2270));+#2268=ORIENTED_EDGE('',*,*,#1027,.T.);+#2269=ORIENTED_EDGE('',*,*,#2259,.F.);+#2270=ORIENTED_EDGE('',*,*,#958,.F.);+#2271=PLANE('',#2272);+#2272=AXIS2_PLACEMENT_3D('',#952,#2273,#963);+#2273=DIRECTION('',(-0.98577742364,1.127963736517E-17,0.168056154428));+#2274=ADVANCED_FACE('',(#2275),#2282,.T.);+#2275=FACE_BOUND('',#2276,.F.);+#2276=EDGE_LOOP('',(#2277,#1212,#2280,#2281));+#2277=ORIENTED_EDGE('',*,*,#2278,.T.);+#2278=EDGE_CURVE('',#1142,#1209,#2279,.T.);+#2279=LINE('',#1143,#397);+#2280=ORIENTED_EDGE('',*,*,#2067,.F.);+#2281=ORIENTED_EDGE('',*,*,#1146,.F.);+#2282=CYLINDRICAL_SURFACE('',#2283,0.33);+#2283=AXIS2_PLACEMENT_3D('',#1106,#956,#1009);+#2284=ADVANCED_FACE('',(#2285),#2292,.F.);+#2285=FACE_BOUND('',#2286,.F.);+#2286=EDGE_LOOP('',(#2287,#1207,#2290,#2291));+#2287=ORIENTED_EDGE('',*,*,#2288,.T.);+#2288=EDGE_CURVE('',#1136,#1203,#2289,.T.);+#2289=LINE('',#1137,#397);+#2290=ORIENTED_EDGE('',*,*,#2278,.F.);+#2291=ORIENTED_EDGE('',*,*,#1141,.F.);+#2292=PLANE('',#2293);+#2293=AXIS2_PLACEMENT_3D('',#1137,#2214,#1002);+#2294=ADVANCED_FACE('',(#2295),#2302,.F.);+#2295=FACE_BOUND('',#2296,.F.);+#2296=EDGE_LOOP('',(#2297,#1201,#2300,#2301));+#2297=ORIENTED_EDGE('',*,*,#2298,.T.);+#2298=EDGE_CURVE('',#1131,#1198,#2299,.T.);+#2299=LINE('',#1132,#397);+#2300=ORIENTED_EDGE('',*,*,#2288,.F.);+#2301=ORIENTED_EDGE('',*,*,#1135,.F.);+#2302=CYLINDRICAL_SURFACE('',#2303,1.E-01);+#2303=AXIS2_PLACEMENT_3D('',#1118,#956,#995);+#2304=ADVANCED_FACE('',(#2305),#2312,.F.);+#2305=FACE_BOUND('',#2306,.F.);+#2306=EDGE_LOOP('',(#2307,#1196,#2310,#2311));+#2307=ORIENTED_EDGE('',*,*,#2308,.T.);+#2308=EDGE_CURVE('',#1126,#1193,#2309,.T.);+#2309=LINE('',#1127,#397);+#2310=ORIENTED_EDGE('',*,*,#2298,.F.);+#2311=ORIENTED_EDGE('',*,*,#1130,.F.);+#2312=PLANE('',#2313);+#2313=AXIS2_PLACEMENT_3D('',#1127,#95,#336);+#2314=ADVANCED_FACE('',(#2315),#2322,.F.);+#2315=FACE_BOUND('',#2316,.F.);+#2316=EDGE_LOOP('',(#2317,#1191,#2320,#2321));+#2317=ORIENTED_EDGE('',*,*,#2318,.T.);+#2318=EDGE_CURVE('',#1121,#1188,#2319,.T.);+#2319=LINE('',#1122,#397);+#2320=ORIENTED_EDGE('',*,*,#2308,.F.);+#2321=ORIENTED_EDGE('',*,*,#1125,.F.);+#2322=PLANE('',#2323);+#2323=AXIS2_PLACEMENT_3D('',#1122,#336,#13);+#2324=ADVANCED_FACE('',(#2325),#2332,.F.);+#2325=FACE_BOUND('',#2326,.F.);+#2326=EDGE_LOOP('',(#2327,#1186,#2330,#2331));+#2327=ORIENTED_EDGE('',*,*,#2328,.T.);+#2328=EDGE_CURVE('',#1114,#1181,#2329,.T.);+#2329=LINE('',#1115,#397);+#2330=ORIENTED_EDGE('',*,*,#2318,.F.);+#2331=ORIENTED_EDGE('',*,*,#1120,.F.);+#2332=PLANE('',#2333);+#2333=AXIS2_PLACEMENT_3D('',#1115,#13,#386);+#2334=ADVANCED_FACE('',(#2335),#2342,.T.);+#2335=FACE_BOUND('',#2336,.F.);+#2336=EDGE_LOOP('',(#2337,#1179,#2340,#2341));+#2337=ORIENTED_EDGE('',*,*,#2338,.T.);+#2338=EDGE_CURVE('',#1109,#1176,#2339,.T.);+#2339=LINE('',#1110,#397);+#2340=ORIENTED_EDGE('',*,*,#2328,.F.);+#2341=ORIENTED_EDGE('',*,*,#1113,.F.);+#2342=CYLINDRICAL_SURFACE('',#2343,0.33);+#2343=AXIS2_PLACEMENT_3D('',#1118,#956,#972);+#2344=ADVANCED_FACE('',(#2345),#2350,.F.);+#2345=FACE_BOUND('',#2346,.F.);+#2346=EDGE_LOOP('',(#2347,#1174,#2348,#2349));+#2347=ORIENTED_EDGE('',*,*,#1167,.T.);+#2348=ORIENTED_EDGE('',*,*,#2338,.F.);+#2349=ORIENTED_EDGE('',*,*,#1108,.F.);+#2350=PLANE('',#2351);+#2351=AXIS2_PLACEMENT_3D('',#1103,#2273,#963);+#2352=ADVANCED_FACE('',(#2353),#2360,.T.);+#2353=FACE_BOUND('',#2354,.F.);+#2354=EDGE_LOOP('',(#2355,#1352,#2358,#2359));+#2355=ORIENTED_EDGE('',*,*,#2356,.T.);+#2356=EDGE_CURVE('',#1282,#1349,#2357,.T.);+#2357=LINE('',#1283,#397);+#2358=ORIENTED_EDGE('',*,*,#2079,.F.);+#2359=ORIENTED_EDGE('',*,*,#1286,.F.);+#2360=CYLINDRICAL_SURFACE('',#2361,0.33);+#2361=AXIS2_PLACEMENT_3D('',#1246,#956,#1009);+#2362=ADVANCED_FACE('',(#2363),#2370,.F.);+#2363=FACE_BOUND('',#2364,.F.);+#2364=EDGE_LOOP('',(#2365,#1347,#2368,#2369));+#2365=ORIENTED_EDGE('',*,*,#2366,.T.);+#2366=EDGE_CURVE('',#1276,#1343,#2367,.T.);+#2367=LINE('',#1277,#397);+#2368=ORIENTED_EDGE('',*,*,#2356,.F.);+#2369=ORIENTED_EDGE('',*,*,#1281,.F.);+#2370=PLANE('',#2371);+#2371=AXIS2_PLACEMENT_3D('',#1277,#2214,#1002);+#2372=ADVANCED_FACE('',(#2373),#2380,.F.);+#2373=FACE_BOUND('',#2374,.F.);+#2374=EDGE_LOOP('',(#2375,#1341,#2378,#2379));+#2375=ORIENTED_EDGE('',*,*,#2376,.T.);+#2376=EDGE_CURVE('',#1271,#1338,#2377,.T.);+#2377=LINE('',#1272,#397);+#2378=ORIENTED_EDGE('',*,*,#2366,.F.);+#2379=ORIENTED_EDGE('',*,*,#1275,.F.);+#2380=CYLINDRICAL_SURFACE('',#2381,1.E-01);+#2381=AXIS2_PLACEMENT_3D('',#1258,#956,#995);+#2382=ADVANCED_FACE('',(#2383),#2390,.F.);+#2383=FACE_BOUND('',#2384,.F.);+#2384=EDGE_LOOP('',(#2385,#1336,#2388,#2389));+#2385=ORIENTED_EDGE('',*,*,#2386,.T.);+#2386=EDGE_CURVE('',#1266,#1333,#2387,.T.);+#2387=LINE('',#1267,#397);+#2388=ORIENTED_EDGE('',*,*,#2376,.F.);+#2389=ORIENTED_EDGE('',*,*,#1270,.F.);+#2390=PLANE('',#2391);+#2391=AXIS2_PLACEMENT_3D('',#1267,#95,#336);+#2392=ADVANCED_FACE('',(#2393),#2400,.F.);+#2393=FACE_BOUND('',#2394,.F.);+#2394=EDGE_LOOP('',(#2395,#1331,#2398,#2399));+#2395=ORIENTED_EDGE('',*,*,#2396,.T.);+#2396=EDGE_CURVE('',#1261,#1328,#2397,.T.);+#2397=LINE('',#1262,#397);+#2398=ORIENTED_EDGE('',*,*,#2386,.F.);+#2399=ORIENTED_EDGE('',*,*,#1265,.F.);+#2400=PLANE('',#2401);+#2401=AXIS2_PLACEMENT_3D('',#1262,#336,#13);+#2402=ADVANCED_FACE('',(#2403),#2410,.F.);+#2403=FACE_BOUND('',#2404,.F.);+#2404=EDGE_LOOP('',(#2405,#1326,#2408,#2409));+#2405=ORIENTED_EDGE('',*,*,#2406,.T.);+#2406=EDGE_CURVE('',#1254,#1321,#2407,.T.);+#2407=LINE('',#1255,#397);+#2408=ORIENTED_EDGE('',*,*,#2396,.F.);+#2409=ORIENTED_EDGE('',*,*,#1260,.F.);+#2410=PLANE('',#2411);+#2411=AXIS2_PLACEMENT_3D('',#1255,#13,#386);+#2412=ADVANCED_FACE('',(#2413),#2420,.T.);+#2413=FACE_BOUND('',#2414,.F.);+#2414=EDGE_LOOP('',(#2415,#1319,#2418,#2419));+#2415=ORIENTED_EDGE('',*,*,#2416,.T.);+#2416=EDGE_CURVE('',#1249,#1316,#2417,.T.);+#2417=LINE('',#1250,#397);+#2418=ORIENTED_EDGE('',*,*,#2406,.F.);+#2419=ORIENTED_EDGE('',*,*,#1253,.F.);+#2420=CYLINDRICAL_SURFACE('',#2421,0.33);+#2421=AXIS2_PLACEMENT_3D('',#1258,#956,#972);+#2422=ADVANCED_FACE('',(#2423),#2428,.F.);+#2423=FACE_BOUND('',#2424,.F.);+#2424=EDGE_LOOP('',(#2425,#1314,#2426,#2427));+#2425=ORIENTED_EDGE('',*,*,#1307,.T.);+#2426=ORIENTED_EDGE('',*,*,#2416,.F.);+#2427=ORIENTED_EDGE('',*,*,#1248,.F.);+#2428=PLANE('',#2429);+#2429=AXIS2_PLACEMENT_3D('',#1243,#2273,#963);+#2430=ADVANCED_FACE('',(#2431),#2438,.F.);+#2431=FACE_BOUND('',#2432,.F.);+#2432=EDGE_LOOP('',(#2433,#1482,#2436,#2437));+#2433=ORIENTED_EDGE('',*,*,#2434,.T.);+#2434=EDGE_CURVE('',#1413,#1478,#2435,.T.);+#2435=LINE('',#1414,#397);+#2436=ORIENTED_EDGE('',*,*,#2044,.F.);+#2437=ORIENTED_EDGE('',*,*,#1418,.F.);+#2438=PLANE('',#2439);+#2439=AXIS2_PLACEMENT_3D('',#1414,#2214,#1002);+#2440=ADVANCED_FACE('',(#2441),#2448,.F.);+#2441=FACE_BOUND('',#2442,.F.);+#2442=EDGE_LOOP('',(#2443,#1476,#2446,#2447));+#2443=ORIENTED_EDGE('',*,*,#2444,.T.);+#2444=EDGE_CURVE('',#1408,#1473,#2445,.T.);+#2445=LINE('',#1409,#397);+#2446=ORIENTED_EDGE('',*,*,#2434,.F.);+#2447=ORIENTED_EDGE('',*,*,#1412,.F.);+#2448=CYLINDRICAL_SURFACE('',#2449,1.E-01);+#2449=AXIS2_PLACEMENT_3D('',#1395,#956,#995);+#2450=ADVANCED_FACE('',(#2451),#2458,.F.);+#2451=FACE_BOUND('',#2452,.F.);+#2452=EDGE_LOOP('',(#2453,#1471,#2456,#2457));+#2453=ORIENTED_EDGE('',*,*,#2454,.T.);+#2454=EDGE_CURVE('',#1403,#1468,#2455,.T.);+#2455=LINE('',#1404,#397);+#2456=ORIENTED_EDGE('',*,*,#2444,.F.);+#2457=ORIENTED_EDGE('',*,*,#1407,.F.);+#2458=PLANE('',#2459);+#2459=AXIS2_PLACEMENT_3D('',#1404,#95,#336);+#2460=ADVANCED_FACE('',(#2461),#2468,.F.);+#2461=FACE_BOUND('',#2462,.F.);+#2462=EDGE_LOOP('',(#2463,#1466,#2466,#2467));+#2463=ORIENTED_EDGE('',*,*,#2464,.T.);+#2464=EDGE_CURVE('',#1398,#1463,#2465,.T.);+#2465=LINE('',#1399,#397);+#2466=ORIENTED_EDGE('',*,*,#2454,.F.);+#2467=ORIENTED_EDGE('',*,*,#1402,.F.);+#2468=PLANE('',#2469);+#2469=AXIS2_PLACEMENT_3D('',#1399,#336,#13);+#2470=ADVANCED_FACE('',(#2471),#2478,.F.);+#2471=FACE_BOUND('',#2472,.F.);+#2472=EDGE_LOOP('',(#2473,#1461,#2476,#2477));+#2473=ORIENTED_EDGE('',*,*,#2474,.T.);+#2474=EDGE_CURVE('',#1391,#1456,#2475,.T.);+#2475=LINE('',#1392,#397);+#2476=ORIENTED_EDGE('',*,*,#2464,.F.);+#2477=ORIENTED_EDGE('',*,*,#1397,.F.);+#2478=PLANE('',#2479);+#2479=AXIS2_PLACEMENT_3D('',#1392,#13,#386);+#2480=ADVANCED_FACE('',(#2481),#2488,.T.);+#2481=FACE_BOUND('',#2482,.F.);+#2482=EDGE_LOOP('',(#2483,#1454,#2486,#2487));+#2483=ORIENTED_EDGE('',*,*,#2484,.T.);+#2484=EDGE_CURVE('',#1386,#1451,#2485,.T.);+#2485=LINE('',#1387,#397);+#2486=ORIENTED_EDGE('',*,*,#2474,.F.);+#2487=ORIENTED_EDGE('',*,*,#1390,.F.);+#2488=CYLINDRICAL_SURFACE('',#2489,0.33);+#2489=AXIS2_PLACEMENT_3D('',#1395,#956,#972);+#2490=ADVANCED_FACE('',(#2491),#2496,.F.);+#2491=FACE_BOUND('',#2492,.F.);+#2492=EDGE_LOOP('',(#2493,#1449,#2494,#2495));+#2493=ORIENTED_EDGE('',*,*,#1442,.T.);+#2494=ORIENTED_EDGE('',*,*,#2484,.F.);+#2495=ORIENTED_EDGE('',*,*,#1385,.F.);+#2496=PLANE('',#2497);+#2497=AXIS2_PLACEMENT_3D('',#1380,#2273,#963);+#2498=ADVANCED_FACE('',(#2499),#2506,.F.);+#2499=FACE_BOUND('',#2500,.F.);+#2500=EDGE_LOOP('',(#2501,#1611,#2504,#2505));+#2501=ORIENTED_EDGE('',*,*,#2502,.T.);+#2502=EDGE_CURVE('',#1538,#1607,#2503,.T.);+#2503=LINE('',#1539,#58);+#2504=ORIENTED_EDGE('',*,*,#2180,.F.);+#2505=ORIENTED_EDGE('',*,*,#1544,.F.);+#2506=PLANE('',#2507);+#2507=AXIS2_PLACEMENT_3D('',#1539,#2508,#1549);+#2508=DIRECTION('',(-0.98577742364,-1.094432792881E-16,-0.168056154428));+#2509=ADVANCED_FACE('',(#2510),#2517,.F.);+#2510=FACE_BOUND('',#2511,.F.);+#2511=EDGE_LOOP('',(#2512,#1605,#2515,#2516));+#2512=ORIENTED_EDGE('',*,*,#2513,.T.);+#2513=EDGE_CURVE('',#1533,#1602,#2514,.T.);+#2514=LINE('',#1534,#58);+#2515=ORIENTED_EDGE('',*,*,#2502,.F.);+#2516=ORIENTED_EDGE('',*,*,#1537,.F.);+#2517=CYLINDRICAL_SURFACE('',#1541,1.E-01);+#2518=ADVANCED_FACE('',(#2519),#2526,.F.);+#2519=FACE_BOUND('',#2520,.F.);+#2520=EDGE_LOOP('',(#2521,#1600,#2524,#2525));+#2521=ORIENTED_EDGE('',*,*,#2522,.T.);+#2522=EDGE_CURVE('',#1528,#1597,#2523,.T.);+#2523=LINE('',#1529,#58);+#2524=ORIENTED_EDGE('',*,*,#2513,.F.);+#2525=ORIENTED_EDGE('',*,*,#1532,.F.);+#2526=PLANE('',#2527);+#2527=AXIS2_PLACEMENT_3D('',#1529,#95,#73);+#2528=ADVANCED_FACE('',(#2529),#2536,.F.);+#2529=FACE_BOUND('',#2530,.F.);+#2530=EDGE_LOOP('',(#2531,#1595,#2534,#2535));+#2531=ORIENTED_EDGE('',*,*,#2532,.T.);+#2532=EDGE_CURVE('',#1523,#1592,#2533,.T.);+#2533=LINE('',#1524,#58);+#2534=ORIENTED_EDGE('',*,*,#2522,.F.);+#2535=ORIENTED_EDGE('',*,*,#1527,.F.);+#2536=PLANE('',#2537);+#2537=AXIS2_PLACEMENT_3D('',#1524,#73,#13);+#2538=ADVANCED_FACE('',(#2539),#2546,.F.);+#2539=FACE_BOUND('',#2540,.F.);+#2540=EDGE_LOOP('',(#2541,#1590,#2544,#2545));+#2541=ORIENTED_EDGE('',*,*,#2542,.T.);+#2542=EDGE_CURVE('',#1515,#1585,#2543,.T.);+#2543=LINE('',#1516,#58);+#2544=ORIENTED_EDGE('',*,*,#2532,.F.);+#2545=ORIENTED_EDGE('',*,*,#1522,.F.);+#2546=PLANE('',#2547);+#2547=AXIS2_PLACEMENT_3D('',#1516,#13,#28);+#2548=ADVANCED_FACE('',(#2549),#2556,.T.);+#2549=FACE_BOUND('',#2550,.F.);+#2550=EDGE_LOOP('',(#2551,#1583,#2554,#2555));+#2551=ORIENTED_EDGE('',*,*,#2552,.T.);+#2552=EDGE_CURVE('',#1508,#1580,#2553,.T.);+#2553=LINE('',#1509,#58);+#2554=ORIENTED_EDGE('',*,*,#2542,.F.);+#2555=ORIENTED_EDGE('',*,*,#1514,.F.);+#2556=CYLINDRICAL_SURFACE('',#2557,0.33);+#2557=AXIS2_PLACEMENT_3D('',#1519,#87,#1520);+#2558=ADVANCED_FACE('',(#2559),#2564,.F.);+#2559=FACE_BOUND('',#2560,.F.);+#2560=EDGE_LOOP('',(#2561,#1578,#2562,#2563));+#2561=ORIENTED_EDGE('',*,*,#1571,.T.);+#2562=ORIENTED_EDGE('',*,*,#2552,.F.);+#2563=ORIENTED_EDGE('',*,*,#1507,.F.);+#2564=PLANE('',#2565);+#2565=AXIS2_PLACEMENT_3D('',#1502,#2566,#1512);+#2566=DIRECTION('',(0.98577742364,1.094432792881E-16,0.168056154428));+#2567=ADVANCED_FACE('',(#2568),#2575,.T.);+#2568=FACE_BOUND('',#2569,.F.);+#2569=EDGE_LOOP('',(#2570,#1750,#2573,#2574));+#2570=ORIENTED_EDGE('',*,*,#2571,.T.);+#2571=EDGE_CURVE('',#1680,#1747,#2572,.T.);+#2572=LINE('',#1681,#58);+#2573=ORIENTED_EDGE('',*,*,#2135,.F.);+#2574=ORIENTED_EDGE('',*,*,#1684,.F.);+#2575=CYLINDRICAL_SURFACE('',#2576,0.33);+#2576=AXIS2_PLACEMENT_3D('',#1644,#87,#1554);+#2577=ADVANCED_FACE('',(#2578),#2585,.F.);+#2578=FACE_BOUND('',#2579,.F.);+#2579=EDGE_LOOP('',(#2580,#1745,#2583,#2584));+#2580=ORIENTED_EDGE('',*,*,#2581,.T.);+#2581=EDGE_CURVE('',#1674,#1741,#2582,.T.);+#2582=LINE('',#1675,#58);+#2583=ORIENTED_EDGE('',*,*,#2571,.F.);+#2584=ORIENTED_EDGE('',*,*,#1679,.F.);+#2585=PLANE('',#2586);+#2586=AXIS2_PLACEMENT_3D('',#1675,#2508,#1549);+#2587=ADVANCED_FACE('',(#2588),#2595,.F.);+#2588=FACE_BOUND('',#2589,.F.);+#2589=EDGE_LOOP('',(#2590,#1739,#2593,#2594));+#2590=ORIENTED_EDGE('',*,*,#2591,.T.);+#2591=EDGE_CURVE('',#1669,#1736,#2592,.T.);+#2592=LINE('',#1670,#58);+#2593=ORIENTED_EDGE('',*,*,#2581,.F.);+#2594=ORIENTED_EDGE('',*,*,#1673,.F.);+#2595=CYLINDRICAL_SURFACE('',#1677,1.E-01);+#2596=ADVANCED_FACE('',(#2597),#2604,.F.);+#2597=FACE_BOUND('',#2598,.F.);+#2598=EDGE_LOOP('',(#2599,#1734,#2602,#2603));+#2599=ORIENTED_EDGE('',*,*,#2600,.T.);+#2600=EDGE_CURVE('',#1664,#1731,#2601,.T.);+#2601=LINE('',#1665,#58);+#2602=ORIENTED_EDGE('',*,*,#2591,.F.);+#2603=ORIENTED_EDGE('',*,*,#1668,.F.);+#2604=PLANE('',#2605);+#2605=AXIS2_PLACEMENT_3D('',#1665,#95,#73);+#2606=ADVANCED_FACE('',(#2607),#2614,.F.);+#2607=FACE_BOUND('',#2608,.F.);+#2608=EDGE_LOOP('',(#2609,#1729,#2612,#2613));+#2609=ORIENTED_EDGE('',*,*,#2610,.T.);+#2610=EDGE_CURVE('',#1659,#1726,#2611,.T.);+#2611=LINE('',#1660,#58);+#2612=ORIENTED_EDGE('',*,*,#2600,.F.);+#2613=ORIENTED_EDGE('',*,*,#1663,.F.);+#2614=PLANE('',#2615);+#2615=AXIS2_PLACEMENT_3D('',#1660,#73,#13);+#2616=ADVANCED_FACE('',(#2617),#2624,.F.);+#2617=FACE_BOUND('',#2618,.F.);+#2618=EDGE_LOOP('',(#2619,#1724,#2622,#2623));+#2619=ORIENTED_EDGE('',*,*,#2620,.T.);+#2620=EDGE_CURVE('',#1652,#1719,#2621,.T.);+#2621=LINE('',#1653,#58);+#2622=ORIENTED_EDGE('',*,*,#2610,.F.);+#2623=ORIENTED_EDGE('',*,*,#1658,.F.);+#2624=PLANE('',#2625);+#2625=AXIS2_PLACEMENT_3D('',#1653,#13,#28);+#2626=ADVANCED_FACE('',(#2627),#2634,.T.);+#2627=FACE_BOUND('',#2628,.F.);+#2628=EDGE_LOOP('',(#2629,#1717,#2632,#2633));+#2629=ORIENTED_EDGE('',*,*,#2630,.T.);+#2630=EDGE_CURVE('',#1647,#1714,#2631,.T.);+#2631=LINE('',#1648,#58);+#2632=ORIENTED_EDGE('',*,*,#2620,.F.);+#2633=ORIENTED_EDGE('',*,*,#1651,.F.);+#2634=CYLINDRICAL_SURFACE('',#2635,0.33);+#2635=AXIS2_PLACEMENT_3D('',#1656,#87,#1520);+#2636=ADVANCED_FACE('',(#2637),#2642,.F.);+#2637=FACE_BOUND('',#2638,.F.);+#2638=EDGE_LOOP('',(#2639,#1712,#2640,#2641));+#2639=ORIENTED_EDGE('',*,*,#1705,.T.);+#2640=ORIENTED_EDGE('',*,*,#2630,.F.);+#2641=ORIENTED_EDGE('',*,*,#1646,.F.);+#2642=PLANE('',#2643);+#2643=AXIS2_PLACEMENT_3D('',#1641,#2566,#1512);+#2644=ADVANCED_FACE('',(#2645),#2652,.T.);+#2645=FACE_BOUND('',#2646,.F.);+#2646=EDGE_LOOP('',(#2647,#1890,#2650,#2651));+#2647=ORIENTED_EDGE('',*,*,#2648,.T.);+#2648=EDGE_CURVE('',#1820,#1887,#2649,.T.);+#2649=LINE('',#1821,#58);+#2650=ORIENTED_EDGE('',*,*,#2147,.F.);+#2651=ORIENTED_EDGE('',*,*,#1824,.F.);+#2652=CYLINDRICAL_SURFACE('',#2653,0.33);+#2653=AXIS2_PLACEMENT_3D('',#1784,#87,#1554);+#2654=ADVANCED_FACE('',(#2655),#2662,.F.);+#2655=FACE_BOUND('',#2656,.F.);+#2656=EDGE_LOOP('',(#2657,#1885,#2660,#2661));+#2657=ORIENTED_EDGE('',*,*,#2658,.T.);+#2658=EDGE_CURVE('',#1814,#1881,#2659,.T.);+#2659=LINE('',#1815,#58);+#2660=ORIENTED_EDGE('',*,*,#2648,.F.);+#2661=ORIENTED_EDGE('',*,*,#1819,.F.);+#2662=PLANE('',#2663);+#2663=AXIS2_PLACEMENT_3D('',#1815,#2508,#1549);+#2664=ADVANCED_FACE('',(#2665),#2672,.F.);+#2665=FACE_BOUND('',#2666,.F.);+#2666=EDGE_LOOP('',(#2667,#1879,#2670,#2671));+#2667=ORIENTED_EDGE('',*,*,#2668,.T.);+#2668=EDGE_CURVE('',#1809,#1876,#2669,.T.);+#2669=LINE('',#1810,#58);+#2670=ORIENTED_EDGE('',*,*,#2658,.F.);+#2671=ORIENTED_EDGE('',*,*,#1813,.F.);+#2672=CYLINDRICAL_SURFACE('',#1817,1.E-01);+#2673=ADVANCED_FACE('',(#2674),#2681,.F.);+#2674=FACE_BOUND('',#2675,.F.);+#2675=EDGE_LOOP('',(#2676,#1874,#2679,#2680));+#2676=ORIENTED_EDGE('',*,*,#2677,.T.);+#2677=EDGE_CURVE('',#1804,#1871,#2678,.T.);+#2678=LINE('',#1805,#58);+#2679=ORIENTED_EDGE('',*,*,#2668,.F.);+#2680=ORIENTED_EDGE('',*,*,#1808,.F.);+#2681=PLANE('',#2682);+#2682=AXIS2_PLACEMENT_3D('',#1805,#95,#73);+#2683=ADVANCED_FACE('',(#2684),#2691,.F.);+#2684=FACE_BOUND('',#2685,.F.);+#2685=EDGE_LOOP('',(#2686,#1869,#2689,#2690));+#2686=ORIENTED_EDGE('',*,*,#2687,.T.);+#2687=EDGE_CURVE('',#1799,#1866,#2688,.T.);+#2688=LINE('',#1800,#58);+#2689=ORIENTED_EDGE('',*,*,#2677,.F.);+#2690=ORIENTED_EDGE('',*,*,#1803,.F.);+#2691=PLANE('',#2692);+#2692=AXIS2_PLACEMENT_3D('',#1800,#73,#13);+#2693=ADVANCED_FACE('',(#2694),#2701,.F.);+#2694=FACE_BOUND('',#2695,.F.);+#2695=EDGE_LOOP('',(#2696,#1864,#2699,#2700));+#2696=ORIENTED_EDGE('',*,*,#2697,.T.);+#2697=EDGE_CURVE('',#1792,#1859,#2698,.T.);+#2698=LINE('',#1793,#58);+#2699=ORIENTED_EDGE('',*,*,#2687,.F.);+#2700=ORIENTED_EDGE('',*,*,#1798,.F.);+#2701=PLANE('',#2702);+#2702=AXIS2_PLACEMENT_3D('',#1793,#13,#28);+#2703=ADVANCED_FACE('',(#2704),#2711,.T.);+#2704=FACE_BOUND('',#2705,.F.);+#2705=EDGE_LOOP('',(#2706,#1857,#2709,#2710));+#2706=ORIENTED_EDGE('',*,*,#2707,.T.);+#2707=EDGE_CURVE('',#1787,#1854,#2708,.T.);+#2708=LINE('',#1788,#58);+#2709=ORIENTED_EDGE('',*,*,#2697,.F.);+#2710=ORIENTED_EDGE('',*,*,#1791,.F.);+#2711=CYLINDRICAL_SURFACE('',#2712,0.33);+#2712=AXIS2_PLACEMENT_3D('',#1796,#87,#1520);+#2713=ADVANCED_FACE('',(#2714),#2719,.F.);+#2714=FACE_BOUND('',#2715,.F.);+#2715=EDGE_LOOP('',(#2716,#1852,#2717,#2718));+#2716=ORIENTED_EDGE('',*,*,#1845,.T.);+#2717=ORIENTED_EDGE('',*,*,#2707,.F.);+#2718=ORIENTED_EDGE('',*,*,#1786,.F.);+#2719=PLANE('',#2720);+#2720=AXIS2_PLACEMENT_3D('',#1781,#2566,#1512);+#2721=ADVANCED_FACE('',(#2722),#2729,.T.);+#2722=FACE_BOUND('',#2723,.F.);+#2723=EDGE_LOOP('',(#2724,#2030,#2727,#2728));+#2724=ORIENTED_EDGE('',*,*,#2725,.T.);+#2725=EDGE_CURVE('',#1960,#2027,#2726,.T.);+#2726=LINE('',#1961,#58);+#2727=ORIENTED_EDGE('',*,*,#2159,.F.);+#2728=ORIENTED_EDGE('',*,*,#1964,.F.);+#2729=CYLINDRICAL_SURFACE('',#2730,0.33);+#2730=AXIS2_PLACEMENT_3D('',#1924,#87,#1554);+#2731=ADVANCED_FACE('',(#2732),#2739,.F.);+#2732=FACE_BOUND('',#2733,.F.);+#2733=EDGE_LOOP('',(#2734,#2025,#2737,#2738));+#2734=ORIENTED_EDGE('',*,*,#2735,.T.);+#2735=EDGE_CURVE('',#1954,#2021,#2736,.T.);+#2736=LINE('',#1955,#58);+#2737=ORIENTED_EDGE('',*,*,#2725,.F.);+#2738=ORIENTED_EDGE('',*,*,#1959,.F.);+#2739=PLANE('',#2740);+#2740=AXIS2_PLACEMENT_3D('',#1955,#2508,#1549);+#2741=ADVANCED_FACE('',(#2742),#2749,.F.);+#2742=FACE_BOUND('',#2743,.F.);+#2743=EDGE_LOOP('',(#2744,#2019,#2747,#2748));+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#1949,#2016,#2746,.T.);+#2746=LINE('',#1950,#58);+#2747=ORIENTED_EDGE('',*,*,#2735,.F.);+#2748=ORIENTED_EDGE('',*,*,#1953,.F.);+#2749=CYLINDRICAL_SURFACE('',#1957,1.E-01);+#2750=ADVANCED_FACE('',(#2751),#2758,.F.);+#2751=FACE_BOUND('',#2752,.F.);+#2752=EDGE_LOOP('',(#2753,#2014,#2756,#2757));+#2753=ORIENTED_EDGE('',*,*,#2754,.T.);+#2754=EDGE_CURVE('',#1944,#2011,#2755,.T.);+#2755=LINE('',#1945,#58);+#2756=ORIENTED_EDGE('',*,*,#2745,.F.);+#2757=ORIENTED_EDGE('',*,*,#1948,.F.);+#2758=PLANE('',#2759);+#2759=AXIS2_PLACEMENT_3D('',#1945,#95,#73);+#2760=ADVANCED_FACE('',(#2761),#2768,.F.);+#2761=FACE_BOUND('',#2762,.F.);+#2762=EDGE_LOOP('',(#2763,#2009,#2766,#2767));+#2763=ORIENTED_EDGE('',*,*,#2764,.T.);+#2764=EDGE_CURVE('',#1939,#2006,#2765,.T.);+#2765=LINE('',#1940,#58);+#2766=ORIENTED_EDGE('',*,*,#2754,.F.);+#2767=ORIENTED_EDGE('',*,*,#1943,.F.);+#2768=PLANE('',#2769);+#2769=AXIS2_PLACEMENT_3D('',#1940,#73,#13);+#2770=ADVANCED_FACE('',(#2771),#2778,.F.);+#2771=FACE_BOUND('',#2772,.F.);+#2772=EDGE_LOOP('',(#2773,#2004,#2776,#2777));+#2773=ORIENTED_EDGE('',*,*,#2774,.T.);+#2774=EDGE_CURVE('',#1932,#1999,#2775,.T.);+#2775=LINE('',#1933,#58);+#2776=ORIENTED_EDGE('',*,*,#2764,.F.);+#2777=ORIENTED_EDGE('',*,*,#1938,.F.);+#2778=PLANE('',#2779);+#2779=AXIS2_PLACEMENT_3D('',#1933,#13,#28);+#2780=ADVANCED_FACE('',(#2781),#2788,.T.);+#2781=FACE_BOUND('',#2782,.F.);+#2782=EDGE_LOOP('',(#2783,#1997,#2786,#2787));+#2783=ORIENTED_EDGE('',*,*,#2784,.T.);+#2784=EDGE_CURVE('',#1927,#1994,#2785,.T.);+#2785=LINE('',#1928,#58);+#2786=ORIENTED_EDGE('',*,*,#2774,.F.);+#2787=ORIENTED_EDGE('',*,*,#1931,.F.);+#2788=CYLINDRICAL_SURFACE('',#2789,0.33);+#2789=AXIS2_PLACEMENT_3D('',#1936,#87,#1520);+#2790=ADVANCED_FACE('',(#2791),#2796,.F.);+#2791=FACE_BOUND('',#2792,.F.);+#2792=EDGE_LOOP('',(#2793,#1992,#2794,#2795));+#2793=ORIENTED_EDGE('',*,*,#1985,.T.);+#2794=ORIENTED_EDGE('',*,*,#2784,.F.);+#2795=ORIENTED_EDGE('',*,*,#1926,.F.);+#2796=PLANE('',#2797);+#2797=AXIS2_PLACEMENT_3D('',#1921,#2566,#1512);+#2798=ADVANCED_FACE('',(#2799),#2800,.F.);+#2799=FACE_BOUND('',#2108,.T.);+#2800=PLANE('',#2801);+#2801=AXIS2_PLACEMENT_3D('',#2115,#95,#59);+#2802=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2806)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#2803,#2804,#2805)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#2803=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#2804=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#2805=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#2806=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2803,'distance_accuracy_value','confusion accuracy');+#2807=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#2808=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#2809,#2819,#2820,#2821,#2822,#2823,#2824,#2825,#2826,#2827,#2828,#2829,#2830,#2831,#2832,#2841,#2842,#2843,#2844,#2845,#2846,#2847,#2848,#2849,#2850,#2851,#2852,#2853,#2854,#2855,#2856,#2857,#2858,#2859,#2860,#2861,#2862,#2863,#2864,#2865,#2866,#2867,#2868,#2869,#2870,#2871,#2872,#2873,#2874,#2875,#2876,#2877,#2878,#2879,#2880,#2881,#2882,#2883,#2884,#2885,#2886,#2887,#2888,#2889,#2890,#2891,#2892,#2893,#2894,#2895,#2896,#2897,#2898,#2899,#2900,#2901,#2902,#2903,#2904,#2905,#2906,#2907,#2908,#2909,#2910,#2911,#2912,#2913,#2914,#2915,#2916,#2917,#2918,#2919,#2920,#2921,#2922,#2923,#2924,#2925,#2926,#2927,#2928,#2929,#2930,#2931,#2932,#2933,#2934,#2935,#2936,#2937,#2938,#2939,#2940,#2941,#2942,#2943,#2944,#2945,#2946,#2947,#2948,#2949,#2950,#2951,#2952,#2953,#2954,#2955,#2956,#2957,#2958,#2959,#2960,#2961,#2962,#2963,#2964,#2965,#2966,#2967,#2968,#2969,#2970,#2971,#2972),#2802);+#2809=STYLED_ITEM('color',(#2810),#17);+#2810=PRESENTATION_STYLE_ASSIGNMENT((#2811,#2817));+#2811=SURFACE_STYLE_USAGE(.BOTH.,#2812);+#2812=SURFACE_SIDE_STYLE('',(#2813));+#2813=SURFACE_STYLE_FILL_AREA(#2814);+#2814=FILL_AREA_STYLE('',(#2815));+#2815=FILL_AREA_STYLE_COLOUR('',#2816);+#2816=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#2817=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2816);+#2818=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#2819=STYLED_ITEM('color',(#2810),#43);+#2820=STYLED_ITEM('color',(#2810),#97);+#2821=STYLED_ITEM('color',(#2810),#110);+#2822=STYLED_ITEM('color',(#2810),#129);+#2823=STYLED_ITEM('color',(#2810),#142);+#2824=STYLED_ITEM('color',(#2810),#187);+#2825=STYLED_ITEM('color',(#2810),#232);+#2826=STYLED_ITEM('color',(#2810),#245);+#2827=STYLED_ITEM('color',(#2810),#258);+#2828=STYLED_ITEM('color',(#2810),#267);+#2829=STYLED_ITEM('color',(#2810),#282);+#2830=STYLED_ITEM('color',(#2810),#346);+#2831=STYLED_ITEM('color',(#2810),#357);+#2832=STYLED_ITEM('color',(#2833),#376);+#2833=PRESENTATION_STYLE_ASSIGNMENT((#2834,#2840));+#2834=SURFACE_STYLE_USAGE(.BOTH.,#2835);+#2835=SURFACE_SIDE_STYLE('',(#2836));+#2836=SURFACE_STYLE_FILL_AREA(#2837);+#2837=FILL_AREA_STYLE('',(#2838));+#2838=FILL_AREA_STYLE_COLOUR('',#2839);+#2839=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#2840=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2839);+#2841=STYLED_ITEM('color',(#2810),#401);+#2842=STYLED_ITEM('color',(#2833),#419);+#2843=STYLED_ITEM('color',(#2810),#440);+#2844=STYLED_ITEM('color',(#2833),#458);+#2845=STYLED_ITEM('color',(#2810),#479);+#2846=STYLED_ITEM('color',(#2833),#497);+#2847=STYLED_ITEM('color',(#2810),#518);+#2848=STYLED_ITEM('color',(#2810),#528);+#2849=STYLED_ITEM('color',(#2833),#540);+#2850=STYLED_ITEM('color',(#2810),#561);+#2851=STYLED_ITEM('color',(#2833),#579);+#2852=STYLED_ITEM('color',(#2810),#600);+#2853=STYLED_ITEM('color',(#2833),#618);+#2854=STYLED_ITEM('color',(#2810),#639);+#2855=STYLED_ITEM('color',(#2833),#657);+#2856=STYLED_ITEM('color',(#2810),#678);+#2857=STYLED_ITEM('color',(#2810),#695);+#2858=STYLED_ITEM('color',(#2810),#710);+#2859=STYLED_ITEM('color',(#2810),#725);+#2860=STYLED_ITEM('color',(#2833),#736);+#2861=STYLED_ITEM('color',(#2810),#759);+#2862=STYLED_ITEM('color',(#2810),#805);+#2863=STYLED_ITEM('color',(#2810),#819);+#2864=STYLED_ITEM('color',(#2810),#833);+#2865=STYLED_ITEM('color',(#2810),#847);+#2866=STYLED_ITEM('color',(#2833),#893);+#2867=STYLED_ITEM('color',(#2810),#913);+#2868=STYLED_ITEM('color',(#2833),#944);+#2869=STYLED_ITEM('color',(#2833),#1015);+#2870=STYLED_ITEM('color',(#2833),#1031);+#2871=STYLED_ITEM('color',(#2810),#1084);+#2872=STYLED_ITEM('color',(#2833),#1095);+#2873=STYLED_ITEM('color',(#2833),#1155);+#2874=STYLED_ITEM('color',(#2833),#1171);+#2875=STYLED_ITEM('color',(#2810),#1224);+#2876=STYLED_ITEM('color',(#2833),#1235);+#2877=STYLED_ITEM('color',(#2833),#1295);+#2878=STYLED_ITEM('color',(#2833),#1311);+#2879=STYLED_ITEM('color',(#2810),#1364);+#2880=STYLED_ITEM('color',(#2833),#1372);+#2881=STYLED_ITEM('color',(#2833),#1430);+#2882=STYLED_ITEM('color',(#2833),#1446);+#2883=STYLED_ITEM('color',(#2833),#1494);+#2884=STYLED_ITEM('color',(#2833),#1559);+#2885=STYLED_ITEM('color',(#2833),#1575);+#2886=STYLED_ITEM('color',(#2810),#1623);+#2887=STYLED_ITEM('color',(#2833),#1633);+#2888=STYLED_ITEM('color',(#2833),#1693);+#2889=STYLED_ITEM('color',(#2833),#1709);+#2890=STYLED_ITEM('color',(#2810),#1762);+#2891=STYLED_ITEM('color',(#2833),#1773);+#2892=STYLED_ITEM('color',(#2833),#1833);+#2893=STYLED_ITEM('color',(#2833),#1849);+#2894=STYLED_ITEM('color',(#2810),#1902);+#2895=STYLED_ITEM('color',(#2833),#1913);+#2896=STYLED_ITEM('color',(#2833),#1973);+#2897=STYLED_ITEM('color',(#2833),#1989);+#2898=STYLED_ITEM('color',(#2833),#2040);+#2899=STYLED_ITEM('color',(#2833),#2050);+#2900=STYLED_ITEM('color',(#2833),#2062);+#2901=STYLED_ITEM('color',(#2833),#2074);+#2902=STYLED_ITEM('color',(#2810),#2086);+#2903=STYLED_ITEM('color',(#2810),#2120);+#2904=STYLED_ITEM('color',(#2833),#2130);+#2905=STYLED_ITEM('color',(#2833),#2142);+#2906=STYLED_ITEM('color',(#2833),#2154);+#2907=STYLED_ITEM('color',(#2810),#2166);+#2908=STYLED_ITEM('color',(#2833),#2176);+#2909=STYLED_ITEM('color',(#2810),#2186);+#2910=STYLED_ITEM('color',(#2833),#2194);+#2911=STYLED_ITEM('color',(#2833),#2204);+#2912=STYLED_ITEM('color',(#2833),#2215);+#2913=STYLED_ITEM('color',(#2833),#2225);+#2914=STYLED_ITEM('color',(#2833),#2235);+#2915=STYLED_ITEM('color',(#2833),#2245);+#2916=STYLED_ITEM('color',(#2833),#2255);+#2917=STYLED_ITEM('color',(#2833),#2265);+#2918=STYLED_ITEM('color',(#2833),#2274);+#2919=STYLED_ITEM('color',(#2833),#2284);+#2920=STYLED_ITEM('color',(#2833),#2294);+#2921=STYLED_ITEM('color',(#2833),#2304);+#2922=STYLED_ITEM('color',(#2833),#2314);+#2923=STYLED_ITEM('color',(#2833),#2324);+#2924=STYLED_ITEM('color',(#2833),#2334);+#2925=STYLED_ITEM('color',(#2833),#2344);+#2926=STYLED_ITEM('color',(#2833),#2352);+#2927=STYLED_ITEM('color',(#2833),#2362);+#2928=STYLED_ITEM('color',(#2833),#2372);+#2929=STYLED_ITEM('color',(#2833),#2382);+#2930=STYLED_ITEM('color',(#2833),#2392);+#2931=STYLED_ITEM('color',(#2833),#2402);+#2932=STYLED_ITEM('color',(#2833),#2412);+#2933=STYLED_ITEM('color',(#2833),#2422);+#2934=STYLED_ITEM('color',(#2833),#2430);+#2935=STYLED_ITEM('color',(#2833),#2440);+#2936=STYLED_ITEM('color',(#2833),#2450);+#2937=STYLED_ITEM('color',(#2833),#2460);+#2938=STYLED_ITEM('color',(#2833),#2470);+#2939=STYLED_ITEM('color',(#2833),#2480);+#2940=STYLED_ITEM('color',(#2833),#2490);+#2941=STYLED_ITEM('color',(#2833),#2498);+#2942=STYLED_ITEM('color',(#2833),#2509);+#2943=STYLED_ITEM('color',(#2833),#2518);+#2944=STYLED_ITEM('color',(#2833),#2528);+#2945=STYLED_ITEM('color',(#2833),#2538);+#2946=STYLED_ITEM('color',(#2833),#2548);+#2947=STYLED_ITEM('color',(#2833),#2558);+#2948=STYLED_ITEM('color',(#2833),#2567);+#2949=STYLED_ITEM('color',(#2833),#2577);+#2950=STYLED_ITEM('color',(#2833),#2587);+#2951=STYLED_ITEM('color',(#2833),#2596);+#2952=STYLED_ITEM('color',(#2833),#2606);+#2953=STYLED_ITEM('color',(#2833),#2616);+#2954=STYLED_ITEM('color',(#2833),#2626);+#2955=STYLED_ITEM('color',(#2833),#2636);+#2956=STYLED_ITEM('color',(#2833),#2644);+#2957=STYLED_ITEM('color',(#2833),#2654);+#2958=STYLED_ITEM('color',(#2833),#2664);+#2959=STYLED_ITEM('color',(#2833),#2673);+#2960=STYLED_ITEM('color',(#2833),#2683);+#2961=STYLED_ITEM('color',(#2833),#2693);+#2962=STYLED_ITEM('color',(#2833),#2703);+#2963=STYLED_ITEM('color',(#2833),#2713);+#2964=STYLED_ITEM('color',(#2833),#2721);+#2965=STYLED_ITEM('color',(#2833),#2731);+#2966=STYLED_ITEM('color',(#2833),#2741);+#2967=STYLED_ITEM('color',(#2833),#2750);+#2968=STYLED_ITEM('color',(#2833),#2760);+#2969=STYLED_ITEM('color',(#2833),#2770);+#2970=STYLED_ITEM('color',(#2833),#2780);+#2971=STYLED_ITEM('color',(#2833),#2790);+#2972=STYLED_ITEM('color',(#2973),#2798);+#2973=PRESENTATION_STYLE_ASSIGNMENT((#2974,#2980));+#2974=SURFACE_STYLE_USAGE(.BOTH.,#2975);+#2975=SURFACE_SIDE_STYLE('',(#2976));+#2976=SURFACE_STYLE_FILL_AREA(#2977);+#2977=FILL_AREA_STYLE('',(#2978));+#2978=FILL_AREA_STYLE_COLOUR('',#2979);+#2979=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#2980=CURVE_STYLE('',#2818,POSITIVE_LENGTH_MEASURE(0.1),#2979);+ENDSEC;+END-ISO-10303-21;
docs/amc0311sdwvr-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+243@@ -0,0 +1,243 @@+{+ "slug": "amc0311sdwvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments , SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "ic",+ "amc0311sdwvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "amc0311sdwvr.kicad_sym",+ "amc0311sdwvr.kicad_mod",+ "amc0311sdwvr.glb",+ "amc0311sdwvr.step",+ "amc0311sdwvr.lbr",+ "docs/hero.png",+ "docs/amc0311sdwvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "amc0311sdwvr-hero.glb",+ "amc0311sdwvr-hero.overlay.json",+ "amc0311sdwvr-etched.glb"+ ],+ "component": {+ "mpn": "AMC0311SDWVR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "IC",+ "subcategory": "IC",+ "datasheet": "https://www.ti.com/lit/ds/symlink/amc0311s.pdf",+ "parts": {+ "symbol": "amc0311sdwvr.kicad_sym",+ "footprint": "amc0311sdwvr.kicad_mod",+ "model_3d": "amc0311sdwvr-hero.glb",+ "model_3d_plain": "amc0311sdwvr-etched.glb",+ "model_3d_step": "amc0311sdwvr-etched.step",+ "model_3d_step_plain": "amc0311sdwvr.step",+ "lbr": "amc0311sdwvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C44211429",+ "digikey": "296-AMC0311SDWVRTR-ND",+ "mouser": "595-AMC0311SDWVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-31T06:35:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-AMC0311SDWVRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-AMC0311SDWVR",+ "status": "found",+ "lifecycle": "New Product"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD1",+ "type": "power_in",+ "description": "High-side power supply, operating range 3V to 5.5V relative to GND1 (absolute max 6.5V); see Power Supply Recommendations for decoupling."+ },+ {+ "number": "2",+ "name": "INP",+ "type": "input",+ "description": "Analog input of the amplifier; linear input range VINP - VSNSN of 0V to 2.25V."+ },+ {+ "number": "3",+ "name": "SNSN",+ "type": "input",+ "description": "GND1 sense pin and inverting analog input to the amplifier; connect to GND1."+ },+ {+ "number": "4",+ "name": "GND1",+ "type": "power_in",+ "description": "High-side analog ground."+ },+ {+ "number": "5",+ "name": "GND2",+ "type": "power_in",+ "description": "Low-side analog ground."+ },+ {+ "number": "6",+ "name": "REFIN",+ "type": "input",+ "description": "Reference input whose voltage is added as an offset to the output voltage; connect to a low-impedance source (0V to VDD2) or to GND2 if not used."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "output",+ "description": "Single-ended analog output with fixed gain of 1V/V, supports up to 500pF capacitive load and a resistive load of at least 10kΩ to GND2."+ },+ {+ "number": "8",+ "name": "VDD2",+ "type": "power_in",+ "description": "Low-side power supply, operating range 3V to 5.5V relative to GND2 (absolute max 6.5V); see Power Supply Recommendations for decoupling."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: RLOAD in the recommended operating conditions table is printed as '10 1 kΩ' (likely min 10 kΩ with a"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0734,+ "at": "2026-10-31T06:34:36"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/amc0311s.pdf",+ "pages": 39,+ "sha256": "bf0e850ae5ce0d4f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "amc0311sdwvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 11.5,+ 5.85,+ 2.8+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7835b043f302f4e38c68e80e7290f961db6856aac23a2204bcf32fbed7df4481",+ "checked": "2026-10-31",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "amc0311sdwvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 11.5,+ 5.85,+ 2.8+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "878e8701fa7f78752c13d5b73be42594e96a4ad0561b4f511b4c327eb4133956",+ "checked": "2026-10-31",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "package_dims": {+ "package_code": "DWV0008A",+ "source_page": 36,+ "D": {+ "nom_mm": 5.85,+ "range_mm": [+ 5.75,+ 5.95+ ]+ },+ "E1": {+ "nom_mm": 7.5,+ "range_mm": [+ 7.4,+ 7.6+ ]+ },+ "E": {+ "nom_mm": 11.5,+ "range_mm": [+ null,+ null+ ]+ },+ "e": {+ "nom_mm": 1.27,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 2.8,+ "range_mm": [+ null,+ 2.8+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "amc0311sdwvr.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ }+}
page.jsonadded+249@@ -0,0 +1,249 @@+{+ "slug": "amc0311sdwvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments , SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "ic",+ "amc0311sdwvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "amc0311sdwvr.kicad_sym",+ "amc0311sdwvr.kicad_mod",+ "amc0311sdwvr.glb",+ "amc0311sdwvr.step",+ "amc0311sdwvr.lbr",+ "docs/hero.png",+ "docs/amc0311sdwvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "amc0311sdwvr-hero.glb",+ "amc0311sdwvr-hero.overlay.json",+ "amc0311sdwvr-etched.glb"+ ],+ "component": {+ "mpn": "AMC0311SDWVR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "IC",+ "subcategory": "IC",+ "datasheet": "https://www.ti.com/lit/ds/symlink/amc0311s.pdf",+ "parts": {+ "symbol": "amc0311sdwvr.kicad_sym",+ "footprint": "amc0311sdwvr.kicad_mod",+ "model_3d": "amc0311sdwvr-hero.glb",+ "model_3d_plain": "amc0311sdwvr-etched.glb",+ "model_3d_step": "amc0311sdwvr-etched.step",+ "model_3d_step_plain": "amc0311sdwvr.step",+ "lbr": "amc0311sdwvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C44211429",+ "digikey": "296-AMC0311SDWVRTR-ND",+ "mouser": "595-AMC0311SDWVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-31T06:35:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-AMC0311SDWVRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-AMC0311SDWVR",+ "status": "found",+ "lifecycle": "New Product"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD1",+ "type": "power_in",+ "description": "High-side power supply, operating range 3V to 5.5V relative to GND1 (absolute max 6.5V); see Power Supply Recommendations for decoupling."+ },+ {+ "number": "2",+ "name": "INP",+ "type": "input",+ "description": "Analog input of the amplifier; linear input range VINP - VSNSN of 0V to 2.25V."+ },+ {+ "number": "3",+ "name": "SNSN",+ "type": "input",+ "description": "GND1 sense pin and inverting analog input to the amplifier; connect to GND1."+ },+ {+ "number": "4",+ "name": "GND1",+ "type": "power_in",+ "description": "High-side analog ground."+ },+ {+ "number": "5",+ "name": "GND2",+ "type": "power_in",+ "description": "Low-side analog ground."+ },+ {+ "number": "6",+ "name": "REFIN",+ "type": "input",+ "description": "Reference input whose voltage is added as an offset to the output voltage; connect to a low-impedance source (0V to VDD2) or to GND2 if not used."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "output",+ "description": "Single-ended analog output with fixed gain of 1V/V, supports up to 500pF capacitive load and a resistive load of at least 10kΩ to GND2."+ },+ {+ "number": "8",+ "name": "VDD2",+ "type": "power_in",+ "description": "Low-side power supply, operating range 3V to 5.5V relative to GND2 (absolute max 6.5V); see Power Supply Recommendations for decoupling."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: RLOAD in the recommended operating conditions table is printed as '10 1 kΩ' (likely min 10 kΩ with a"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0734,+ "at": "2026-10-31T06:34:36"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/amc0311s.pdf",+ "pages": 39,+ "sha256": "bf0e850ae5ce0d4f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "amc0311sdwvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 11.5,+ 5.85,+ 2.8+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7835b043f302f4e38c68e80e7290f961db6856aac23a2204bcf32fbed7df4481",+ "checked": "2026-10-31",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "amc0311sdwvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 11.5,+ 5.85,+ 2.8+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "878e8701fa7f78752c13d5b73be42594e96a4ad0561b4f511b4c327eb4133956",+ "checked": "2026-10-31",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "package_dims": {+ "package_code": "DWV0008A",+ "source_page": 36,+ "D": {+ "nom_mm": 5.85,+ "range_mm": [+ 5.75,+ 5.95+ ]+ },+ "E1": {+ "nom_mm": 7.5,+ "range_mm": [+ 7.4,+ 7.6+ ]+ },+ "E": {+ "nom_mm": 11.5,+ "range_mm": [+ null,+ null+ ]+ },+ "e": {+ "nom_mm": 1.27,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 2.8,+ "range_mm": [+ null,+ 2.8+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "amc0311sdwvr.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>amc0311sdwvr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>amc0311sdwvr</title>