AM26LV32IDR

@@ -0,0 +1,58 @@+# AM26LV32IDR++**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-16++AM26LV32IDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1B | input | Receiver 1 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 1A on pin 2. |+| 2 | 1A | input | Receiver 1 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 1B on pin 1. |+| 3 | 1Y | tri_state | Receiver 1 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device. |+| 4 | G | input | Active-high output enable common to all four receivers. Logic 1 enables the 3-state Y outputs; VIH ≥ 2 V, VIL ≤ 0.8 V. |+| 5 | 2Y | tri_state | Receiver 2 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device. |+| 6 | 2A | input | Receiver 2 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 2B on pin 7. |+| 7 | 2B | input | Receiver 2 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 2A on pin 6. |+| 8 | GND | power_in | Device ground reference. All voltages are measured with respect to this terminal. |+| 9 | 3B | input | Receiver 3 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 3A on pin 10. |+| 10 | 3A | input | Receiver 3 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 3B on pin 9. |+| 11 | 3Y | tri_state | Receiver 3 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device. |+| 12 | /G | input | Active-low output enable common to all four receivers. Logic 0 enables the 3-state Y outputs; VIH ≥ 2 V, VIL ≤ 0.8 V. Together with G on pin 4, allows either active-high or active-low enable operation. |+| 13 | 4Y | tri_state | Receiver 4 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device. |+| 14 | 4A | input | Receiver 4 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 4B on pin 15. |+| 15 | 4B | input | Receiver 4 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 4A on pin 14. |+| 16 | VCC | power_in | Positive supply voltage. Recommended operating range 3 V to 3.6 V (3.3 V nominal); absolute maximum 6 V. Bypass with a decoupling capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `AM26LV32IDRD`+- `AM26LV32IDR`+- `AM26LV32IDRNS`+- `AM26LV32IDRNSR`++## CAD (KiCad official)++- Symbol: `AM26LV32IDR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/am26lv32.pdf) (30 pp, sha256 `e4980e215a92b037`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/am26lv32idr-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "am26lv32idr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "am26lv32idr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "am26lv32idr.kicad_sym",+    "am26lv32idr.kicad_mod",+    "am26lv32idr.glb",+    "am26lv32idr.step",+    "am26lv32idr.lbr",+    "docs/hero.png",+    "docs/am26lv32idr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file