component
AL1793AFE-13
Public Made by Adomby adom
Diodes Incorporated LED Drivers, UDFN-14-EP(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+5491
README.md+82al1793afe-13-etched.glbal1793afe-13-hero.glbal1793afe-13-hero.overlay.json+405al1793afe-13.glbal1793afe-13.kicad_mod+341al1793afe-13.kicad_sym+73al1793afe-13.lbr+146al1793afe-13.step+3964docs/al1793afe-13-datasheet.pdfdocs/hero.pngpackage.json+236page.json+242viewers/footprint.html+1viewers/symbol.html+1README.mdadded+82@@ -0,0 +1,82 @@+# AL1793AFE-13++**Diodes Incorporated** · LED Drivers · UDFN-14-EP(4x3)++AL1793AFE-13 from Diodes Incorporated, in a UDFN-14-EP(4x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Active-high enable, internally pulled down; the device is enabled above about 2.5 V and disabled below 0.4 V (VIH min 2.5 V, VIL max 0.4 V). |+| 2 | PWM4/GND | power_in | For the AL1793 this pin is GND (PWM4 is not applicable to the AL1793, which has three channels). |+| 3 | PWM3/GND | input | PWM signal input for channel 3 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V. |+| 4 | PWM2/GND | input | PWM signal input for channel 2 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V. |+| 5 | PWM1 | input | PWM signal input for channel 1, internally pulled down; tie to GND when channel 1 is not used. Digital PWM frequency 0.5 to 4 kHz, minimum on-time 2.5 µs; analog dimming 0.4 V to 1.5 V. |+| 6 | LED1 | output | Channel 1 LED cathode (current sink); regulated current up to 500 mA via RSET, with LED short protection at a 6 V threshold. |+| 7 | LED2/GND | output | Channel 2 LED cathode (current sink) for the AL1793; not GND on this variant. |+| 8 | GND | power_in | Ground. |+| 9 | LED3/GND | output | Channel 3 LED cathode (current sink) for the AL1793; not GND on this variant. |+| 10 | LED4/GND | power_in | For the AL1793 this pin is GND (channel 4 is not applicable to the AL1793). |+| 11 | LEDPG | output | LED power-good indication, asserted low to report insufficient LED headroom; requires an external pull-up resistor (open-drain style). |+| 12 | FAULTB | output | Fault report, asserted low for LED open/short, over-temperature or UVLO; open-drain output that requires an external pull-up resistor; FAULTB leakage max 1 µA at 6 V, low-level max 180 mV at 1 mA. |+| 13 | REF | passive | Reference current setting through an external resistor RSET (VREF 1.5 V typical; IREF 0.125 mA at RSET = 12 kΩ). |+| 14 | VIN | power_in | Supply input, 6.5 V to 30 V recommended operating range; UVLO releases at 6.3 V rising with 300 mV hysteresis. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Diodes Incorporated |+| Package | UDFN-14-EP(4x3) |+| Category | LED Drivers |+| Pins | 15 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input Voltage (ESD HBM, Human Body Model ESD Protection) | ESD | | | 4000 | V | | 7 |+| Input Voltage (ESD CDM, Charged Device Model ESD Protection) | ESD | | | 1000 | V | | 7 |+| Input Voltage | VIN | | | 30 | V | | 7 |+| Enable Voltage, PWM Voltage | VEN, VPWMx | | | 7 | V | | 7 |+| Maximum Junction Temperature | TJ(MAX) | | | 160 | °C | | 7 |+| Storage Temperature Range | TST | -65 | | 150 | °C | | 7 |+| Input voltage at VIN | VIN | 6.5 | | 30 | V | | 7 |+| Operating Ambient Temperature | TA | -40 | | 125 | C | | 7 |+| High-Level Input Voltage on EN and PWMx | VIH | 2.5 | | 5.5 | V | | 7 |+| Low-Level Input Voltage on EN and PWMx | VIL | 0 | | 0.4 | V | | 7 |+| EN Low Voltage | VIL(EN) | | 0 | 0.4 | V | | 8 |+| EN High Voltage | VIH(EN) | 2.5 | | | V | | 8 |+| EN Internal Pulldown | I(EN-PD) | 0.35 | | 3.5 | μA | VEN=5V | 8 |+| Digital PWM Low Voltage | VIL(PWMx) | | | 0.3 | V | | 8 |+| Digital PWM High Voltage | VIH(PWMx) | 2.5 | | | V | | 8 |+| Digital PWM Frequency | FPWMx | 0.5 | | 4 | KHz | | 8 |+| PWM Internal Pulldown | I(PWMx-PD) | 0.35 | | 3.5 | μA | VEN=5V | 8 |+| Reference Voltage | VREF | 1.47 | 1.5 | 1.53 | V | | 8 |+| LEDx Leakage Current | ILED_LEAK | | 0.1 | 2 | μA | VPWMx=0V, VLEDx=+12V | 8 |+| LED Current Accuracy | ILED_ACCURACY | -4 | | 4 | % | RSET=12KΩ | 8 |+| FAULTB Output Low Voltage | VFOL | | | 180 | mV | IFAULTB=1mA | 8 |+| FAULTB Leakage Current | IFOH | | | 1 | μA | VFAULTB=6V | 8 |+| Thermal Resistance Junction-to-Ambient | θJA | | 55 | | °C/W | U-DFN4030-14 (Note 5) | 8 |+| Thermal Resistance Junction-to-Case | θJC | | 12 | | °C/W | U-DFN4030-14 (Note 5) | 8 |++## CAD (KiCad official)++- Symbol: `AL1793AFE-13`+- Footprint: `Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm`+- 3D model: UDFN-14-EP(4x3) (KiCad packages3D, STEP)+- 3D model files: `al1793afe-13-etched.step` / `al1793afe-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `al1793afe-13.step` / `al1793afe-13.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881830787895296) (18 pp, sha256 `b00e0b817e901edf`, retrieved 2026-10-19, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/al1793afe-13-datasheet.pdf)
al1793afe-13-etched.glbadded⋯ 1 unchanged line ⋯
al1793afe-13-hero.glbadded⋯ 1 unchanged line ⋯
al1793afe-13-hero.overlay.jsonadded+405@@ -0,0 +1,405 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "AL1793AFE-13",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 15,+ "span_mm": 6.3,+ "dash_mm": 0.1575,+ "gap_mm": 0.0945,+ "pad_stroke_mm": 0.0378+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.288,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.5,+ 1.5,+ -1.99,+ 1.99+ ],+ "pads_bbox_mm": [+ -1.8,+ 1.8,+ -1.65,+ 1.65+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "al1793afe-13-etched.glb",+ "glb_sha256": "0fa6cb699c784283370cf7dfa40cb6cfc0251f9a70fa50389ae81511fb423061",+ "footprint": "al1793afe-13.kicad_mod",+ "footprint_sha256": "10ae9311a9eb5971730ad3315efd41403df2e6ce9b71f1ce18844094a5787f90",+ "pins": "page.json component.pins",+ "pins_sha256": "b5557a68241ec5ff8f2c1f7b2f9aa96d9d4e6ec0bf3f8db8362a536b12ca2a21"+ },+ "generator": "adom-wiki 1.7.74 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "EN",+ "x": -1.9,+ "y": -1.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "PWM4/GND",+ "x": -1.9,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "PWM3/GND",+ "x": -1.9,+ "y": -0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "PWM2/GND",+ "x": -1.9,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "PWM1",+ "x": -1.9,+ "y": 0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "LED1",+ "x": -1.9,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "LED2/GND",+ "x": -1.9,+ "y": 1.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "GND",+ "x": 1.9,+ "y": 1.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "LED3/GND",+ "x": 1.9,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "LED4/GND",+ "x": 1.9,+ "y": 0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "LEDPG",+ "x": 1.9,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "FAULTB",+ "x": 1.9,+ "y": -0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "REF",+ "x": 1.9,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "VIN",+ "x": 1.9,+ "y": -1.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -1.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -1.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -0.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 0.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 0.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 1.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 1.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 1.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 1.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 0.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 0.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -0.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -1.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -1.5+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.7,+ 3.3+ ],+ "rot": 0.0+ }+ ]+}
al1793afe-13.glbadded⋯ 1 unchanged line ⋯
al1793afe-13.kicad_modadded+341@@ -0,0 +1,341 @@+(footprint "DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "DE Package; 14-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf)")+ (tags "DFN 0.5")+ (property "Reference" "REF**"+ (at 0 -3.05 0)+ (layer "F.SilkS")+ (uuid "51bf979c-6756-41e7-8eef-f562908efeed")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm"+ (at 0 3.05 0)+ (layer "F.Fab")+ (uuid "b81442cb-a14f-4a8d-b0c8-e81c6fce4273")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "d56fc807-5eb6-4ee3-b9b3-51c8655bcf92")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "8e9c53d0-3a7b-4a88-9db4-18062dad0821")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.5 -2.11)+ (end 1.5 -2.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "2874017c-a215-45b9-bcd3-37b6ca26285c")+ )+ (fp_line+ (start -1.5 2.11)+ (end 1.5 2.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "fefe457b-1da7-47ee-b06f-a85396ea3343")+ )+ (fp_poly+ (pts+ (xy -1.99 -1.81) (xy -2.47 -1.81) (xy -1.99 -2.29) (xy -1.99 -1.81)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "169fbf60-43eb-416d-8e90-8dbd88afd57e")+ )+ (fp_line+ (start -2.05 -2.3)+ (end -2.05 2.3)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "1e671a09-a9a3-497d-b4e2-031bbad115ee")+ )+ (fp_line+ (start -2.05 -2.3)+ (end 2.05 -2.3)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "3b63ec02-d13d-4af8-85f1-cb650dbe8aa1")+ )+ (fp_line+ (start -2.05 2.3)+ (end 2.05 2.3)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "e74229b9-97ea-46ba-982e-4fd9e9a02f5e")+ )+ (fp_line+ (start 2.05 -2.3)+ (end 2.05 2.3)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "06fddcd1-8bb3-4575-8c9f-79e3ddd02a57")+ )+ (fp_line+ (start -1.5 -1.25)+ (end -0.75 -2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f513bb4a-9cdb-460e-b662-51e91506f45d")+ )+ (fp_line+ (start -1.5 2)+ (end -1.5 -1.25)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "141553c3-20d5-4be1-af82-60dab57a1c0f")+ )+ (fp_line+ (start -0.75 -2)+ (end 1.5 -2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "e814b9bb-3024-4677-9bb0-53a499512bfc")+ )+ (fp_line+ (start 1.5 -2)+ (end 1.5 2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "21b79864-adc0-47d7-97b8-7f5a71ec378c")+ )+ (fp_line+ (start 1.5 2)+ (end -1.5 2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "15e50706-fd7b-4bd3-a727-c7465265e460")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (uuid "620d75d8-ce02-4aa6-a31b-e2ae2d5b0964")+ (effects+ (font+ (size 0.7 0.7)+ (thickness 0.105)+ )+ )+ )+ (pad "" smd rect+ (at -0.425 -1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "1001b3df-4263-4e7a-b1ca-8fba22152a09")+ )+ (pad "" smd rect+ (at -0.425 -0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "09ce4e71-0b26-4990-87b9-042856ab7ffb")+ )+ (pad "" smd rect+ (at -0.425 0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "290d6626-5c5e-4715-a17f-281221567915")+ )+ (pad "" smd rect+ (at -0.425 1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "bfa799a3-0e1a-47b1-b867-5492d43b2990")+ )+ (pad "" smd rect+ (at 0.425 -1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "b5f0141e-5175-4baa-9190-a42eee1d056b")+ )+ (pad "" smd rect+ (at 0.425 -0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "91694cc6-681f-4f20-8d4f-51403403a074")+ )+ (pad "" smd rect+ (at 0.425 0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "b61c99af-98cd-4d46-872d-8a1683b9f6f2")+ )+ (pad "" smd rect+ (at 0.425 1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "89319ecb-f4c6-4e85-82e2-00b105c17034")+ )+ (pad "1" smd rect+ (at -1.45 -1.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "7d61487d-0c54-44dc-9357-197baa4ae1b8")+ )+ (pad "2" smd rect+ (at -1.45 -1)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "148a531b-b2d0-470b-bb9b-ee548f2c9999")+ )+ (pad "3" smd rect+ (at -1.45 -0.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "9cdb920f-b24a-46e7-b64a-5a242f1818d9")+ )+ (pad "4" smd rect+ (at -1.45 0)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "da746938-458c-486e-b039-5775d80d0ba5")+ )+ (pad "5" smd rect+ (at -1.45 0.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "950925e2-d1ee-4f28-a049-26600ae943ed")+ )+ (pad "6" smd rect+ (at -1.45 1)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "42c92613-7f40-4606-96de-f70b0c889b45")+ )+ (pad "7" smd rect+ (at -1.45 1.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "71bd7486-1b5e-4ae1-8e76-42fafb8e37c7")+ )+ (pad "8" smd rect+ (at 1.45 1.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "2e3f0141-bca9-4ee2-84b6-d81c53f30f96")+ )+ (pad "9" smd rect+ (at 1.45 1)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "bd20f9aa-c21a-4ae4-9408-94e31c3bf820")+ )+ (pad "10" smd rect+ (at 1.45 0.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "efc66e14-74f5-4486-9467-927a276a5e62")+ )+ (pad "11" smd rect+ (at 1.45 0)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "6c768c75-b7fd-4d99-8086-37df2b0c77ac")+ )+ (pad "12" smd rect+ (at 1.45 -0.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3da71586-b470-4557-b31a-d7d498f58cb8")+ )+ (pad "13" smd rect+ (at 1.45 -1)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "ae51bbc8-4cb2-4fd5-83f1-54b5ef636650")+ )+ (pad "14" smd rect+ (at 1.45 -1.5)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "cad1bbaf-ffde-4461-8aba-d2f909ba924d")+ )+ (pad "15" smd rect+ (at 0 0)+ (size 1.7 3.3)+ (layers "F.Cu" "F.Mask")+ (uuid "3beb97ce-1526-48b6-89c9-c75d74a5e9b2")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
al1793afe-13.kicad_symadded+73@@ -0,0 +1,73 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "AL1793AFE-13" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+ (property "Value" "AL1793AFE-13" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "AL1793AFE-13_0_1"+ (rectangle (start -12.70 10.16) (end 12.70 -12.70)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "AL1793AFE-13_1_1"+ (pin input line (at -17.78 7.62 0) (length 5.08)+ (name "EN" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 5.08 0) (length 5.08)+ (name "PWM4/GND" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "PWM3/GND" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 0.00 0) (length 5.08)+ (name "PWM2/GND" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -2.54 0) (length 5.08)+ (name "PWM1" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -5.08 0) (length 5.08)+ (name "LED1" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -7.62 0) (length 5.08)+ (name "LED2/GND" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -10.16 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 7.62 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 5.08 180) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 2.54 180) (length 5.08)+ (name "REF" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 0.00 180) (length 5.08)+ (name "FAULTB" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "LEDPG" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "LED4/GND" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -7.62 180) (length 5.08)+ (name "LED3/GND" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
al1793afe-13.lbradded+146@@ -0,0 +1,146 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm">+ <description>DFN-14-1EP, 3 x 4 mm, 0.5 mm pitch. DE Package; 14-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf)</description>+ <smd name="1" x="-1.4500" y="1.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="2" x="-1.4500" y="1.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="3" x="-1.4500" y="0.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="4" x="-1.4500" y="-0.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="5" x="-1.4500" y="-0.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="6" x="-1.4500" y="-1.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="7" x="-1.4500" y="-1.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="8" x="1.4500" y="-1.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="9" x="1.4500" y="-1.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="10" x="1.4500" y="-0.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="11" x="1.4500" y="-0.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="12" x="1.4500" y="0.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="13" x="1.4500" y="1.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="14" x="1.4500" y="1.5000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="15" x="0.0000" y="-0.0000" dx="1.7000" dy="3.3000" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.9900" y="1.8100"/>+ <vertex x="-2.4700" y="1.8100"/>+ <vertex x="-1.9900" y="2.2900"/>+ <vertex x="-1.9900" y="1.8100"/>+ </polygon>+ <wire x1="-1.5000" y1="2.1100" x2="1.5000" y2="2.1100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="-2.1100" x2="1.5000" y2="-2.1100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="1.2500" x2="-0.7500" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="-1.5000" y1="-2.0000" x2="-1.5000" y2="1.2500" width="0.1000" layer="51"/>+ <wire x1="-0.7500" y1="2.0000" x2="1.5000" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="2.0000" x2="1.5000" y2="-2.0000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="-2.0000" x2="-1.5000" y2="-2.0000" width="0.1000" layer="51"/>+ <text x="0" y="2.710" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.710" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="AL1793AFE-13">+ <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="10.16" width="0.254" layer="94"/>+ <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="EN" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="PWM4/GND" x="-17.78" y="5.08" length="middle" direction="pwr"/>+ <pin name="PWM3/GND" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="PWM2/GND" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="PWM1" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="LED1" x="-17.78" y="-5.08" length="middle" direction="out"/>+ <pin name="LED2/GND" x="-17.78" y="-7.62" length="middle" direction="out"/>+ <pin name="GND" x="-17.78" y="-10.16" length="middle" direction="pwr"/>+ <pin name="EP" x="17.78" y="7.62" length="middle" direction="pas" rot="R180"/>+ <pin name="VIN" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="REF" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="FAULTB" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="LEDPG" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+ <pin name="LED4/GND" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="LED3/GND" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="AL1793AFE-13" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="AL1793AFE-13" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm">+ <connects>+ <connect gate="G$1" pin="EN" pad="1"/>+ <connect gate="G$1" pin="PWM4/GND" pad="2"/>+ <connect gate="G$1" pin="PWM3/GND" pad="3"/>+ <connect gate="G$1" pin="PWM2/GND" pad="4"/>+ <connect gate="G$1" pin="PWM1" pad="5"/>+ <connect gate="G$1" pin="LED1" pad="6"/>+ <connect gate="G$1" pin="LED2/GND" pad="7"/>+ <connect gate="G$1" pin="GND" pad="8"/>+ <connect gate="G$1" pin="EP" pad="15"/>+ <connect gate="G$1" pin="VIN" pad="14"/>+ <connect gate="G$1" pin="REF" pad="13"/>+ <connect gate="G$1" pin="FAULTB" pad="12"/>+ <connect gate="G$1" pin="LEDPG" pad="11"/>+ <connect gate="G$1" pin="LED4/GND" pad="10"/>+ <connect gate="G$1" pin="LED3/GND" pad="9"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
al1793afe-13.stepadded+3964@@ -0,0 +1,3964 @@+ISO-10303-21; +HEADER; +/* DFN-14-1EP_3x4mm_Pitch0.5mm.step 3D STEP model for use in ECAD systems + * Copyright (C) 2017, kicad StepUp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + * + * As a special exception, if you create a design which uses this symbol, + * and embed this symbol or unaltered portions of this symbol into the design, + * this symbol does not by itself cause the resulting design to be covered by + * the GNU General Public License. + * This exception does not however invalidate any other reasons why the design + * itself might be covered by the GNU General Public License. + * If you modify this symbol, you may extend this exception to your version of the symbol, + * but you are not obligated to do so. + * If you do not wish to do so, delete this exception statement from your version + * Risk disclaimer + * *USE 3D CAD DATA AT YOUR OWN RISK* + * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.* + * + */ + +FILE_DESCRIPTION( +/* description */ ('model of DFN-14-1EP_3x4mm_Pitch0.5mm'), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ 'DFN-14-1EP_3x4mm_Pitch0.5mm.step', +/* time_stamp */ '2017-03-23T11:15:43', +/* author */ ('kicad StepUp','ksu'), +/* organization */ ('FreeCAD'), +/* preprocessor_version */ 'OCC', +/* originating_system */ 'kicad StepUp', +/* authorisation */ ''); + +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; + +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', +'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( +'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('DFN-14-1EP_3x4mm_Pitch0.5mm','DFN-14-1EP_3x4mm_Pitch0.5mm' +,'',(#8)); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#3185); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#58,#105,#130,#170,#187,#707,#885,#897,#1089, +#1106,#1146,#1171,#1211,#1244,#1269,#1302,#1342,#1367,#1400,#1440, +#1465,#1505,#1538,#1563,#1596,#1636,#1661,#1701,#1734,#1759,#1792, +#1832,#1857,#1897,#1930,#1955,#1988,#2028,#2053,#2093,#2126,#2151, +#2184,#2224,#2249,#2289,#2322,#2347,#2380,#2397,#2428,#2452,#2476, +#2500,#2517,#2540,#2557,#2574,#2591,#2608,#2625,#2642,#2659,#2676, +#2693,#2710,#2727,#2744,#2761,#2778,#2790,#2807,#2819,#2836,#2848, +#2865,#2877,#2894,#2906,#2923,#2935,#2952,#2964,#2981,#2993,#3010, +#3022,#3039,#3051,#3068,#3080,#3097,#3109,#3126,#3138,#3151,#3176)); +#17 = ADVANCED_FACE('',(#18),#53,.T.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#39,#47)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#34 = CIRCLE('',#35,0.125); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(-1.225,1.,0.E+000)); +#37 = DIRECTION('',(0.E+000,0.E+000,1.)); +#38 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#39 = ORIENTED_EDGE('',*,*,#40,.T.); +#40 = EDGE_CURVE('',#32,#41,#43,.T.); +#41 = VERTEX_POINT('',#42); +#42 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#43 = LINE('',#44,#45); +#44 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#45 = VECTOR('',#46,1.); +#46 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#47 = ORIENTED_EDGE('',*,*,#48,.T.); +#48 = EDGE_CURVE('',#41,#22,#49,.T.); +#49 = LINE('',#50,#51); +#50 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#51 = VECTOR('',#52,1.); +#52 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#53 = PLANE('',#54); +#54 = AXIS2_PLACEMENT_3D('',#55,#56,#57); +#55 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#56 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#57 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#58 = ADVANCED_FACE('',(#59),#100,.F.); +#59 = FACE_BOUND('',#60,.F.); +#60 = EDGE_LOOP('',(#61,#62,#70,#78,#86,#94)); +#61 = ORIENTED_EDGE('',*,*,#21,.F.); +#62 = ORIENTED_EDGE('',*,*,#63,.T.); +#63 = EDGE_CURVE('',#22,#64,#66,.T.); +#64 = VERTEX_POINT('',#65); +#65 = CARTESIAN_POINT('',(-1.5,0.875,0.2)); +#66 = LINE('',#67,#68); +#67 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#68 = VECTOR('',#69,1.); +#69 = DIRECTION('',(0.E+000,0.E+000,1.)); +#70 = ORIENTED_EDGE('',*,*,#71,.T.); +#71 = EDGE_CURVE('',#64,#72,#74,.T.); +#72 = VERTEX_POINT('',#73); +#73 = CARTESIAN_POINT('',(-1.49,0.875,0.2)); +#74 = LINE('',#75,#76); +#75 = CARTESIAN_POINT('',(-1.5,0.875,0.2)); +#76 = VECTOR('',#77,1.); +#77 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#78 = ORIENTED_EDGE('',*,*,#79,.F.); +#79 = EDGE_CURVE('',#80,#72,#82,.T.); +#80 = VERTEX_POINT('',#81); +#81 = CARTESIAN_POINT('',(-1.49,0.875,2.E-002)); +#82 = LINE('',#83,#84); +#83 = CARTESIAN_POINT('',(-1.49,0.875,1.E-002)); +#84 = VECTOR('',#85,1.); +#85 = DIRECTION('',(0.E+000,0.E+000,1.)); +#86 = ORIENTED_EDGE('',*,*,#87,.F.); +#87 = EDGE_CURVE('',#88,#80,#90,.T.); +#88 = VERTEX_POINT('',#89); +#89 = CARTESIAN_POINT('',(-1.225,0.875,2.E-002)); +#90 = LINE('',#91,#92); +#91 = CARTESIAN_POINT('',(-1.495,0.875,2.E-002)); +#92 = VECTOR('',#93,1.); +#93 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#94 = ORIENTED_EDGE('',*,*,#95,.F.); +#95 = EDGE_CURVE('',#24,#88,#96,.T.); +#96 = LINE('',#97,#98); +#97 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#98 = VECTOR('',#99,1.); +#99 = DIRECTION('',(0.E+000,0.E+000,1.)); +#100 = PLANE('',#101); +#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104); +#102 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#103 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#104 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#105 = ADVANCED_FACE('',(#106),#125,.T.); +#106 = FACE_BOUND('',#107,.F.); +#107 = EDGE_LOOP('',(#108,#109,#110,#119)); +#108 = ORIENTED_EDGE('',*,*,#31,.F.); +#109 = ORIENTED_EDGE('',*,*,#95,.T.); +#110 = ORIENTED_EDGE('',*,*,#111,.F.); +#111 = EDGE_CURVE('',#112,#88,#114,.T.); +#112 = VERTEX_POINT('',#113); +#113 = CARTESIAN_POINT('',(-1.225,1.125,2.E-002)); +#114 = CIRCLE('',#115,0.125); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(-1.225,1.,2.E-002)); +#117 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#118 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#119 = ORIENTED_EDGE('',*,*,#120,.F.); +#120 = EDGE_CURVE('',#32,#112,#121,.T.); +#121 = LINE('',#122,#123); +#122 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#123 = VECTOR('',#124,1.); +#124 = DIRECTION('',(0.E+000,0.E+000,1.)); +#125 = CYLINDRICAL_SURFACE('',#126,0.125); +#126 = AXIS2_PLACEMENT_3D('',#127,#128,#129); +#127 = CARTESIAN_POINT('',(-1.225,1.,0.E+000)); +#128 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#129 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#130 = ADVANCED_FACE('',(#131),#165,.F.); +#131 = FACE_BOUND('',#132,.F.); +#132 = EDGE_LOOP('',(#133,#134,#135,#143,#151,#159)); +#133 = ORIENTED_EDGE('',*,*,#40,.F.); +#134 = ORIENTED_EDGE('',*,*,#120,.T.); +#135 = ORIENTED_EDGE('',*,*,#136,.F.); +#136 = EDGE_CURVE('',#137,#112,#139,.T.); +#137 = VERTEX_POINT('',#138); +#138 = CARTESIAN_POINT('',(-1.49,1.125,2.E-002)); +#139 = LINE('',#140,#141); +#140 = CARTESIAN_POINT('',(-1.3575,1.125,2.E-002)); +#141 = VECTOR('',#142,1.); +#142 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#143 = ORIENTED_EDGE('',*,*,#144,.F.); +#144 = EDGE_CURVE('',#145,#137,#147,.T.); +#145 = VERTEX_POINT('',#146); +#146 = CARTESIAN_POINT('',(-1.49,1.125,0.2)); +#147 = LINE('',#148,#149); +#148 = CARTESIAN_POINT('',(-1.49,1.125,1.E-002)); +#149 = VECTOR('',#150,1.); +#150 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#151 = ORIENTED_EDGE('',*,*,#152,.T.); +#152 = EDGE_CURVE('',#145,#153,#155,.T.); +#153 = VERTEX_POINT('',#154); +#154 = CARTESIAN_POINT('',(-1.5,1.125,0.2)); +#155 = LINE('',#156,#157); +#156 = CARTESIAN_POINT('',(-1.225,1.125,0.2)); +#157 = VECTOR('',#158,1.); +#158 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#159 = ORIENTED_EDGE('',*,*,#160,.F.); +#160 = EDGE_CURVE('',#41,#153,#161,.T.); +#161 = LINE('',#162,#163); +#162 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#163 = VECTOR('',#164,1.); +#164 = DIRECTION('',(0.E+000,0.E+000,1.)); +#165 = PLANE('',#166); +#166 = AXIS2_PLACEMENT_3D('',#167,#168,#169); +#167 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#168 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#169 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#170 = ADVANCED_FACE('',(#171),#182,.F.); +#171 = FACE_BOUND('',#172,.F.); +#172 = EDGE_LOOP('',(#173,#174,#180,#181)); +#173 = ORIENTED_EDGE('',*,*,#160,.T.); +#174 = ORIENTED_EDGE('',*,*,#175,.T.); +#175 = EDGE_CURVE('',#153,#64,#176,.T.); +#176 = LINE('',#177,#178); +#177 = CARTESIAN_POINT('',(-1.5,1.125,0.2)); +#178 = VECTOR('',#179,1.); +#179 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#180 = ORIENTED_EDGE('',*,*,#63,.F.); +#181 = ORIENTED_EDGE('',*,*,#48,.F.); +#182 = PLANE('',#183); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#185 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#186 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#187 = ADVANCED_FACE('',(#188,#660),#702,.F.); +#188 = FACE_BOUND('',#189,.F.); +#189 = EDGE_LOOP('',(#190,#200,#208,#216,#224,#233,#241,#247,#248,#249, +#250,#258,#266,#275,#283,#291,#299,#308,#316,#324,#332,#341,#349, +#357,#365,#374,#382,#390,#398,#407,#415,#423,#431,#439,#447,#456, +#464,#472,#480,#489,#497,#505,#513,#522,#530,#538,#546,#555,#563, +#571,#579,#588,#596,#604,#612,#621,#629,#637,#645,#654)); +#190 = ORIENTED_EDGE('',*,*,#191,.F.); +#191 = EDGE_CURVE('',#192,#194,#196,.T.); +#192 = VERTEX_POINT('',#193); +#193 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#194 = VERTEX_POINT('',#195); +#195 = CARTESIAN_POINT('',(1.49,1.625,2.E-002)); +#196 = LINE('',#197,#198); +#197 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#198 = VECTOR('',#199,1.); +#199 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#200 = ORIENTED_EDGE('',*,*,#201,.F.); +#201 = EDGE_CURVE('',#202,#192,#204,.T.); +#202 = VERTEX_POINT('',#203); +#203 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#204 = LINE('',#205,#206); +#205 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#206 = VECTOR('',#207,1.); +#207 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#208 = ORIENTED_EDGE('',*,*,#209,.T.); +#209 = EDGE_CURVE('',#202,#210,#212,.T.); +#210 = VERTEX_POINT('',#211); +#211 = CARTESIAN_POINT('',(-1.49,1.625,2.E-002)); +#212 = LINE('',#213,#214); +#213 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#214 = VECTOR('',#215,1.); +#215 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#216 = ORIENTED_EDGE('',*,*,#217,.T.); +#217 = EDGE_CURVE('',#210,#218,#220,.T.); +#218 = VERTEX_POINT('',#219); +#219 = CARTESIAN_POINT('',(-1.225,1.625,2.E-002)); +#220 = LINE('',#221,#222); +#221 = CARTESIAN_POINT('',(-1.3575,1.625,2.E-002)); +#222 = VECTOR('',#223,1.); +#223 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#224 = ORIENTED_EDGE('',*,*,#225,.T.); +#225 = EDGE_CURVE('',#218,#226,#228,.T.); +#226 = VERTEX_POINT('',#227); +#227 = CARTESIAN_POINT('',(-1.225,1.375,2.E-002)); +#228 = CIRCLE('',#229,0.125); +#229 = AXIS2_PLACEMENT_3D('',#230,#231,#232); +#230 = CARTESIAN_POINT('',(-1.225,1.5,2.E-002)); +#231 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#232 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#233 = ORIENTED_EDGE('',*,*,#234,.T.); +#234 = EDGE_CURVE('',#226,#235,#237,.T.); +#235 = VERTEX_POINT('',#236); +#236 = CARTESIAN_POINT('',(-1.49,1.375,2.E-002)); +#237 = LINE('',#238,#239); +#238 = CARTESIAN_POINT('',(-1.495,1.375,2.E-002)); +#239 = VECTOR('',#240,1.); +#240 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#241 = ORIENTED_EDGE('',*,*,#242,.T.); +#242 = EDGE_CURVE('',#235,#137,#243,.T.); +#243 = LINE('',#244,#245); +#244 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#245 = VECTOR('',#246,1.); +#246 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#247 = ORIENTED_EDGE('',*,*,#136,.T.); +#248 = ORIENTED_EDGE('',*,*,#111,.T.); +#249 = ORIENTED_EDGE('',*,*,#87,.T.); +#250 = ORIENTED_EDGE('',*,*,#251,.T.); +#251 = EDGE_CURVE('',#80,#252,#254,.T.); +#252 = VERTEX_POINT('',#253); +#253 = CARTESIAN_POINT('',(-1.49,0.625,2.E-002)); +#254 = LINE('',#255,#256); +#255 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#256 = VECTOR('',#257,1.); +#257 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#258 = ORIENTED_EDGE('',*,*,#259,.T.); +#259 = EDGE_CURVE('',#252,#260,#262,.T.); +#260 = VERTEX_POINT('',#261); +#261 = CARTESIAN_POINT('',(-1.225,0.625,2.E-002)); +#262 = LINE('',#263,#264); +#263 = CARTESIAN_POINT('',(-1.3575,0.625,2.E-002)); +#264 = VECTOR('',#265,1.); +#265 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#266 = ORIENTED_EDGE('',*,*,#267,.T.); +#267 = EDGE_CURVE('',#260,#268,#270,.T.); +#268 = VERTEX_POINT('',#269); +#269 = CARTESIAN_POINT('',(-1.225,0.375,2.E-002)); +#270 = CIRCLE('',#271,0.125); +#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274); +#272 = CARTESIAN_POINT('',(-1.225,0.5,2.E-002)); +#273 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#274 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#275 = ORIENTED_EDGE('',*,*,#276,.T.); +#276 = EDGE_CURVE('',#268,#277,#279,.T.); +#277 = VERTEX_POINT('',#278); +#278 = CARTESIAN_POINT('',(-1.49,0.375,2.E-002)); +#279 = LINE('',#280,#281); +#280 = CARTESIAN_POINT('',(-1.495,0.375,2.E-002)); +#281 = VECTOR('',#282,1.); +#282 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#283 = ORIENTED_EDGE('',*,*,#284,.T.); +#284 = EDGE_CURVE('',#277,#285,#287,.T.); +#285 = VERTEX_POINT('',#286); +#286 = CARTESIAN_POINT('',(-1.49,0.125,2.E-002)); +#287 = LINE('',#288,#289); +#288 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#289 = VECTOR('',#290,1.); +#290 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#291 = ORIENTED_EDGE('',*,*,#292,.T.); +#292 = EDGE_CURVE('',#285,#293,#295,.T.); +#293 = VERTEX_POINT('',#294); +#294 = CARTESIAN_POINT('',(-1.225,0.125,2.E-002)); +#295 = LINE('',#296,#297); +#296 = CARTESIAN_POINT('',(-1.3575,0.125,2.E-002)); +#297 = VECTOR('',#298,1.); +#298 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#299 = ORIENTED_EDGE('',*,*,#300,.T.); +#300 = EDGE_CURVE('',#293,#301,#303,.T.); +#301 = VERTEX_POINT('',#302); +#302 = CARTESIAN_POINT('',(-1.225,-0.125,2.E-002)); +#303 = CIRCLE('',#304,0.125); +#304 = AXIS2_PLACEMENT_3D('',#305,#306,#307); +#305 = CARTESIAN_POINT('',(-1.225,4.662936703426E-016,2.E-002)); +#306 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#307 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#308 = ORIENTED_EDGE('',*,*,#309,.T.); +#309 = EDGE_CURVE('',#301,#310,#312,.T.); +#310 = VERTEX_POINT('',#311); +#311 = CARTESIAN_POINT('',(-1.49,-0.125,2.E-002)); +#312 = LINE('',#313,#314); +#313 = CARTESIAN_POINT('',(-1.495,-0.125,2.E-002)); +#314 = VECTOR('',#315,1.); +#315 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#316 = ORIENTED_EDGE('',*,*,#317,.T.); +#317 = EDGE_CURVE('',#310,#318,#320,.T.); +#318 = VERTEX_POINT('',#319); +#319 = CARTESIAN_POINT('',(-1.49,-0.375,2.E-002)); +#320 = LINE('',#321,#322); +#321 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#322 = VECTOR('',#323,1.); +#323 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#324 = ORIENTED_EDGE('',*,*,#325,.T.); +#325 = EDGE_CURVE('',#318,#326,#328,.T.); +#326 = VERTEX_POINT('',#327); +#327 = CARTESIAN_POINT('',(-1.225,-0.375,2.E-002)); +#328 = LINE('',#329,#330); +#329 = CARTESIAN_POINT('',(-1.3575,-0.375,2.E-002)); +#330 = VECTOR('',#331,1.); +#331 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#332 = ORIENTED_EDGE('',*,*,#333,.T.); +#333 = EDGE_CURVE('',#326,#334,#336,.T.); +#334 = VERTEX_POINT('',#335); +#335 = CARTESIAN_POINT('',(-1.225,-0.625,2.E-002)); +#336 = CIRCLE('',#337,0.125); +#337 = AXIS2_PLACEMENT_3D('',#338,#339,#340); +#338 = CARTESIAN_POINT('',(-1.225,-0.5,2.E-002)); +#339 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#340 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#341 = ORIENTED_EDGE('',*,*,#342,.T.); +#342 = EDGE_CURVE('',#334,#343,#345,.T.); +#343 = VERTEX_POINT('',#344); +#344 = CARTESIAN_POINT('',(-1.49,-0.625,2.E-002)); +#345 = LINE('',#346,#347); +#346 = CARTESIAN_POINT('',(-1.495,-0.625,2.E-002)); +#347 = VECTOR('',#348,1.); +#348 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#349 = ORIENTED_EDGE('',*,*,#350,.T.); +#350 = EDGE_CURVE('',#343,#351,#353,.T.); +#351 = VERTEX_POINT('',#352); +#352 = CARTESIAN_POINT('',(-1.49,-0.875,2.E-002)); +#353 = LINE('',#354,#355); +#354 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#355 = VECTOR('',#356,1.); +#356 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#357 = ORIENTED_EDGE('',*,*,#358,.T.); +#358 = EDGE_CURVE('',#351,#359,#361,.T.); +#359 = VERTEX_POINT('',#360); +#360 = CARTESIAN_POINT('',(-1.225,-0.875,2.E-002)); +#361 = LINE('',#362,#363); +#362 = CARTESIAN_POINT('',(-1.3575,-0.875,2.E-002)); +#363 = VECTOR('',#364,1.); +#364 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#365 = ORIENTED_EDGE('',*,*,#366,.T.); +#366 = EDGE_CURVE('',#359,#367,#369,.T.); +#367 = VERTEX_POINT('',#368); +#368 = CARTESIAN_POINT('',(-1.225,-1.125,2.E-002)); +#369 = CIRCLE('',#370,0.125); +#370 = AXIS2_PLACEMENT_3D('',#371,#372,#373); +#371 = CARTESIAN_POINT('',(-1.225,-1.,2.E-002)); +#372 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#373 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#374 = ORIENTED_EDGE('',*,*,#375,.T.); +#375 = EDGE_CURVE('',#367,#376,#378,.T.); +#376 = VERTEX_POINT('',#377); +#377 = CARTESIAN_POINT('',(-1.49,-1.125,2.E-002)); +#378 = LINE('',#379,#380); +#379 = CARTESIAN_POINT('',(-1.495,-1.125,2.E-002)); +#380 = VECTOR('',#381,1.); +#381 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#382 = ORIENTED_EDGE('',*,*,#383,.T.); +#383 = EDGE_CURVE('',#376,#384,#386,.T.); +#384 = VERTEX_POINT('',#385); +#385 = CARTESIAN_POINT('',(-1.49,-1.375,2.E-002)); +#386 = LINE('',#387,#388); +#387 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#388 = VECTOR('',#389,1.); +#389 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#390 = ORIENTED_EDGE('',*,*,#391,.T.); +#391 = EDGE_CURVE('',#384,#392,#394,.T.); +#392 = VERTEX_POINT('',#393); +#393 = CARTESIAN_POINT('',(-1.225,-1.375,2.E-002)); +#394 = LINE('',#395,#396); +#395 = CARTESIAN_POINT('',(-1.3575,-1.375,2.E-002)); +#396 = VECTOR('',#397,1.); +#397 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#398 = ORIENTED_EDGE('',*,*,#399,.T.); +#399 = EDGE_CURVE('',#392,#400,#402,.T.); +#400 = VERTEX_POINT('',#401); +#401 = CARTESIAN_POINT('',(-1.225,-1.625,2.E-002)); +#402 = CIRCLE('',#403,0.125); +#403 = AXIS2_PLACEMENT_3D('',#404,#405,#406); +#404 = CARTESIAN_POINT('',(-1.225,-1.5,2.E-002)); +#405 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#406 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#407 = ORIENTED_EDGE('',*,*,#408,.T.); +#408 = EDGE_CURVE('',#400,#409,#411,.T.); +#409 = VERTEX_POINT('',#410); +#410 = CARTESIAN_POINT('',(-1.49,-1.625,2.E-002)); +#411 = LINE('',#412,#413); +#412 = CARTESIAN_POINT('',(-1.495,-1.625,2.E-002)); +#413 = VECTOR('',#414,1.); +#414 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#415 = ORIENTED_EDGE('',*,*,#416,.T.); +#416 = EDGE_CURVE('',#409,#417,#419,.T.); +#417 = VERTEX_POINT('',#418); +#418 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#419 = LINE('',#420,#421); +#420 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#421 = VECTOR('',#422,1.); +#422 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#423 = ORIENTED_EDGE('',*,*,#424,.T.); +#424 = EDGE_CURVE('',#417,#425,#427,.T.); +#425 = VERTEX_POINT('',#426); +#426 = CARTESIAN_POINT('',(1.49,-1.99,2.E-002)); +#427 = LINE('',#428,#429); +#428 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#429 = VECTOR('',#430,1.); +#430 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#431 = ORIENTED_EDGE('',*,*,#432,.F.); +#432 = EDGE_CURVE('',#433,#425,#435,.T.); +#433 = VERTEX_POINT('',#434); +#434 = CARTESIAN_POINT('',(1.49,-1.625,2.E-002)); +#435 = LINE('',#436,#437); +#436 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#437 = VECTOR('',#438,1.); +#438 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#439 = ORIENTED_EDGE('',*,*,#440,.T.); +#440 = EDGE_CURVE('',#433,#441,#443,.T.); +#441 = VERTEX_POINT('',#442); +#442 = CARTESIAN_POINT('',(1.225,-1.625,2.E-002)); +#443 = LINE('',#444,#445); +#444 = CARTESIAN_POINT('',(-0.1325,-1.625,2.E-002)); +#445 = VECTOR('',#446,1.); +#446 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#447 = ORIENTED_EDGE('',*,*,#448,.T.); +#448 = EDGE_CURVE('',#441,#449,#451,.T.); +#449 = VERTEX_POINT('',#450); +#450 = CARTESIAN_POINT('',(1.225,-1.375,2.E-002)); +#451 = CIRCLE('',#452,0.125); +#452 = AXIS2_PLACEMENT_3D('',#453,#454,#455); +#453 = CARTESIAN_POINT('',(1.225,-1.5,2.E-002)); +#454 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#455 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#456 = ORIENTED_EDGE('',*,*,#457,.T.); +#457 = EDGE_CURVE('',#449,#458,#460,.T.); +#458 = VERTEX_POINT('',#459); +#459 = CARTESIAN_POINT('',(1.49,-1.375,2.E-002)); +#460 = LINE('',#461,#462); +#461 = CARTESIAN_POINT('',(4.999999999999E-003,-1.375,2.E-002)); +#462 = VECTOR('',#463,1.); +#463 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#464 = ORIENTED_EDGE('',*,*,#465,.F.); +#465 = EDGE_CURVE('',#466,#458,#468,.T.); +#466 = VERTEX_POINT('',#467); +#467 = CARTESIAN_POINT('',(1.49,-1.125,2.E-002)); +#468 = LINE('',#469,#470); +#469 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#470 = VECTOR('',#471,1.); +#471 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#472 = ORIENTED_EDGE('',*,*,#473,.T.); +#473 = EDGE_CURVE('',#466,#474,#476,.T.); +#474 = VERTEX_POINT('',#475); +#475 = CARTESIAN_POINT('',(1.225,-1.125,2.E-002)); +#476 = LINE('',#477,#478); +#477 = CARTESIAN_POINT('',(-0.1325,-1.125,2.E-002)); +#478 = VECTOR('',#479,1.); +#479 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#480 = ORIENTED_EDGE('',*,*,#481,.T.); +#481 = EDGE_CURVE('',#474,#482,#484,.T.); +#482 = VERTEX_POINT('',#483); +#483 = CARTESIAN_POINT('',(1.225,-0.875,2.E-002)); +#484 = CIRCLE('',#485,0.125); +#485 = AXIS2_PLACEMENT_3D('',#486,#487,#488); +#486 = CARTESIAN_POINT('',(1.225,-1.,2.E-002)); +#487 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#488 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#489 = ORIENTED_EDGE('',*,*,#490,.T.); +#490 = EDGE_CURVE('',#482,#491,#493,.T.); +#491 = VERTEX_POINT('',#492); +#492 = CARTESIAN_POINT('',(1.49,-0.875,2.E-002)); +#493 = LINE('',#494,#495); +#494 = CARTESIAN_POINT('',(5.E-003,-0.875,2.E-002)); +#495 = VECTOR('',#496,1.); +#496 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#497 = ORIENTED_EDGE('',*,*,#498,.F.); +#498 = EDGE_CURVE('',#499,#491,#501,.T.); +#499 = VERTEX_POINT('',#500); +#500 = CARTESIAN_POINT('',(1.49,-0.625,2.E-002)); +#501 = LINE('',#502,#503); +#502 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#503 = VECTOR('',#504,1.); +#504 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#505 = ORIENTED_EDGE('',*,*,#506,.T.); +#506 = EDGE_CURVE('',#499,#507,#509,.T.); +#507 = VERTEX_POINT('',#508); +#508 = CARTESIAN_POINT('',(1.225,-0.625,2.E-002)); +#509 = LINE('',#510,#511); +#510 = CARTESIAN_POINT('',(-0.1325,-0.625,2.E-002)); +#511 = VECTOR('',#512,1.); +#512 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#513 = ORIENTED_EDGE('',*,*,#514,.T.); +#514 = EDGE_CURVE('',#507,#515,#517,.T.); +#515 = VERTEX_POINT('',#516); +#516 = CARTESIAN_POINT('',(1.225,-0.375,2.E-002)); +#517 = CIRCLE('',#518,0.125); +#518 = AXIS2_PLACEMENT_3D('',#519,#520,#521); +#519 = CARTESIAN_POINT('',(1.225,-0.5,2.E-002)); +#520 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#521 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#522 = ORIENTED_EDGE('',*,*,#523,.T.); +#523 = EDGE_CURVE('',#515,#524,#526,.T.); +#524 = VERTEX_POINT('',#525); +#525 = CARTESIAN_POINT('',(1.49,-0.375,2.E-002)); +#526 = LINE('',#527,#528); +#527 = CARTESIAN_POINT('',(5.E-003,-0.375,2.E-002)); +#528 = VECTOR('',#529,1.); +#529 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#530 = ORIENTED_EDGE('',*,*,#531,.F.); +#531 = EDGE_CURVE('',#532,#524,#534,.T.); +#532 = VERTEX_POINT('',#533); +#533 = CARTESIAN_POINT('',(1.49,-0.125,2.E-002)); +#534 = LINE('',#535,#536); +#535 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#536 = VECTOR('',#537,1.); +#537 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#538 = ORIENTED_EDGE('',*,*,#539,.T.); +#539 = EDGE_CURVE('',#532,#540,#542,.T.); +#540 = VERTEX_POINT('',#541); +#541 = CARTESIAN_POINT('',(1.225,-0.125,2.E-002)); +#542 = LINE('',#543,#544); +#543 = CARTESIAN_POINT('',(-0.1325,-0.125,2.E-002)); +#544 = VECTOR('',#545,1.); +#545 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#546 = ORIENTED_EDGE('',*,*,#547,.T.); +#547 = EDGE_CURVE('',#540,#548,#550,.T.); +#548 = VERTEX_POINT('',#549); +#549 = CARTESIAN_POINT('',(1.225,0.125,2.E-002)); +#550 = CIRCLE('',#551,0.125); +#551 = AXIS2_PLACEMENT_3D('',#552,#553,#554); +#552 = CARTESIAN_POINT('',(1.225,-2.720046410332E-016,2.E-002)); +#553 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#554 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#555 = ORIENTED_EDGE('',*,*,#556,.T.); +#556 = EDGE_CURVE('',#548,#557,#559,.T.); +#557 = VERTEX_POINT('',#558); +#558 = CARTESIAN_POINT('',(1.49,0.125,2.E-002)); +#559 = LINE('',#560,#561); +#560 = CARTESIAN_POINT('',(5.E-003,0.125,2.E-002)); +#561 = VECTOR('',#562,1.); +#562 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#563 = ORIENTED_EDGE('',*,*,#564,.F.); +#564 = EDGE_CURVE('',#565,#557,#567,.T.); +#565 = VERTEX_POINT('',#566); +#566 = CARTESIAN_POINT('',(1.49,0.375,2.E-002)); +#567 = LINE('',#568,#569); +#568 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#569 = VECTOR('',#570,1.); +#570 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#571 = ORIENTED_EDGE('',*,*,#572,.T.); +#572 = EDGE_CURVE('',#565,#573,#575,.T.); +#573 = VERTEX_POINT('',#574); +#574 = CARTESIAN_POINT('',(1.225,0.375,2.E-002)); +#575 = LINE('',#576,#577); +#576 = CARTESIAN_POINT('',(-0.1325,0.375,2.E-002)); +#577 = VECTOR('',#578,1.); +#578 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#579 = ORIENTED_EDGE('',*,*,#580,.T.); +#580 = EDGE_CURVE('',#573,#581,#583,.T.); +#581 = VERTEX_POINT('',#582); +#582 = CARTESIAN_POINT('',(1.225,0.625,2.E-002)); +#583 = CIRCLE('',#584,0.125); +#584 = AXIS2_PLACEMENT_3D('',#585,#586,#587); +#585 = CARTESIAN_POINT('',(1.225,0.5,2.E-002)); +#586 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#587 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#588 = ORIENTED_EDGE('',*,*,#589,.T.); +#589 = EDGE_CURVE('',#581,#590,#592,.T.); +#590 = VERTEX_POINT('',#591); +#591 = CARTESIAN_POINT('',(1.49,0.625,2.E-002)); +#592 = LINE('',#593,#594); +#593 = CARTESIAN_POINT('',(5.E-003,0.625,2.E-002)); +#594 = VECTOR('',#595,1.); +#595 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#596 = ORIENTED_EDGE('',*,*,#597,.F.); +#597 = EDGE_CURVE('',#598,#590,#600,.T.); +#598 = VERTEX_POINT('',#599); +#599 = CARTESIAN_POINT('',(1.49,0.875,2.E-002)); +#600 = LINE('',#601,#602); +#601 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#602 = VECTOR('',#603,1.); +#603 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#604 = ORIENTED_EDGE('',*,*,#605,.T.); +#605 = EDGE_CURVE('',#598,#606,#608,.T.); +#606 = VERTEX_POINT('',#607); +#607 = CARTESIAN_POINT('',(1.225,0.875,2.E-002)); +#608 = LINE('',#609,#610); +#609 = CARTESIAN_POINT('',(-0.1325,0.875,2.E-002)); +#610 = VECTOR('',#611,1.); +#611 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#612 = ORIENTED_EDGE('',*,*,#613,.T.); +#613 = EDGE_CURVE('',#606,#614,#616,.T.); +#614 = VERTEX_POINT('',#615); +#615 = CARTESIAN_POINT('',(1.225,1.125,2.E-002)); +#616 = CIRCLE('',#617,0.125); +#617 = AXIS2_PLACEMENT_3D('',#618,#619,#620); +#618 = CARTESIAN_POINT('',(1.225,1.,2.E-002)); +#619 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#620 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#621 = ORIENTED_EDGE('',*,*,#622,.T.); +#622 = EDGE_CURVE('',#614,#623,#625,.T.); +#623 = VERTEX_POINT('',#624); +#624 = CARTESIAN_POINT('',(1.49,1.125,2.E-002)); +#625 = LINE('',#626,#627); +#626 = CARTESIAN_POINT('',(5.E-003,1.125,2.E-002)); +#627 = VECTOR('',#628,1.); +#628 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#629 = ORIENTED_EDGE('',*,*,#630,.F.); +#630 = EDGE_CURVE('',#631,#623,#633,.T.); +#631 = VERTEX_POINT('',#632); +#632 = CARTESIAN_POINT('',(1.49,1.375,2.E-002)); +#633 = LINE('',#634,#635); +#634 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#635 = VECTOR('',#636,1.); +#636 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#637 = ORIENTED_EDGE('',*,*,#638,.T.); +#638 = EDGE_CURVE('',#631,#639,#641,.T.); +#639 = VERTEX_POINT('',#640); +#640 = CARTESIAN_POINT('',(1.225,1.375,2.E-002)); +#641 = LINE('',#642,#643); +#642 = CARTESIAN_POINT('',(-0.1325,1.375,2.E-002)); +#643 = VECTOR('',#644,1.); +#644 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#645 = ORIENTED_EDGE('',*,*,#646,.T.); +#646 = EDGE_CURVE('',#639,#647,#649,.T.); +#647 = VERTEX_POINT('',#648); +#648 = CARTESIAN_POINT('',(1.225,1.625,2.E-002)); +#649 = CIRCLE('',#650,0.125); +#650 = AXIS2_PLACEMENT_3D('',#651,#652,#653); +#651 = CARTESIAN_POINT('',(1.225,1.5,2.E-002)); +#652 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#653 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#654 = ORIENTED_EDGE('',*,*,#655,.T.); +#655 = EDGE_CURVE('',#647,#194,#656,.T.); +#656 = LINE('',#657,#658); +#657 = CARTESIAN_POINT('',(5.E-003,1.625,2.E-002)); +#658 = VECTOR('',#659,1.); +#659 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#660 = FACE_BOUND('',#661,.F.); +#661 = EDGE_LOOP('',(#662,#672,#680,#688,#696)); +#662 = ORIENTED_EDGE('',*,*,#663,.F.); +#663 = EDGE_CURVE('',#664,#666,#668,.T.); +#664 = VERTEX_POINT('',#665); +#665 = CARTESIAN_POINT('',(-0.85,1.3,2.E-002)); +#666 = VERTEX_POINT('',#667); +#667 = CARTESIAN_POINT('',(-0.85,-1.65,2.E-002)); +#668 = LINE('',#669,#670); +#669 = CARTESIAN_POINT('',(-0.85,1.3,2.E-002)); +#670 = VECTOR('',#671,1.); +#671 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#672 = ORIENTED_EDGE('',*,*,#673,.F.); +#673 = EDGE_CURVE('',#674,#664,#676,.T.); +#674 = VERTEX_POINT('',#675); +#675 = CARTESIAN_POINT('',(-0.5,1.65,2.E-002)); +#676 = LINE('',#677,#678); +#677 = CARTESIAN_POINT('',(-0.5,1.65,2.E-002)); +#678 = VECTOR('',#679,1.); +#679 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#680 = ORIENTED_EDGE('',*,*,#681,.F.); +#681 = EDGE_CURVE('',#682,#674,#684,.T.); +#682 = VERTEX_POINT('',#683); +#683 = CARTESIAN_POINT('',(0.85,1.65,2.E-002)); +#684 = LINE('',#685,#686); +#685 = CARTESIAN_POINT('',(0.85,1.65,2.E-002)); +#686 = VECTOR('',#687,1.); +#687 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#688 = ORIENTED_EDGE('',*,*,#689,.F.); +#689 = EDGE_CURVE('',#690,#682,#692,.T.); +#690 = VERTEX_POINT('',#691); +#691 = CARTESIAN_POINT('',(0.85,-1.65,2.E-002)); +#692 = LINE('',#693,#694); +#693 = CARTESIAN_POINT('',(0.85,-1.65,2.E-002)); +#694 = VECTOR('',#695,1.); +#695 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#696 = ORIENTED_EDGE('',*,*,#697,.F.); +#697 = EDGE_CURVE('',#666,#690,#698,.T.); +#698 = LINE('',#699,#700); +#699 = CARTESIAN_POINT('',(-0.85,-1.65,2.E-002)); +#700 = VECTOR('',#701,1.); +#701 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#702 = PLANE('',#703); +#703 = AXIS2_PLACEMENT_3D('',#704,#705,#706); +#704 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#705 = DIRECTION('',(0.E+000,0.E+000,1.)); +#706 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#707 = ADVANCED_FACE('',(#708),#880,.F.); +#708 = FACE_BOUND('',#709,.F.); +#709 = EDGE_LOOP('',(#710,#711,#719,#727,#733,#734,#742,#750,#756,#757, +#765,#773,#779,#780,#788,#796,#802,#803,#811,#819,#825,#826,#834, +#842,#848,#849,#850,#856,#857,#858,#866,#874)); +#710 = ORIENTED_EDGE('',*,*,#209,.F.); +#711 = ORIENTED_EDGE('',*,*,#712,.T.); +#712 = EDGE_CURVE('',#202,#713,#715,.T.); +#713 = VERTEX_POINT('',#714); +#714 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#715 = LINE('',#716,#717); +#716 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#717 = VECTOR('',#718,1.); +#718 = DIRECTION('',(0.E+000,0.E+000,1.)); +#719 = ORIENTED_EDGE('',*,*,#720,.T.); +#720 = EDGE_CURVE('',#713,#721,#723,.T.); +#721 = VERTEX_POINT('',#722); +#722 = CARTESIAN_POINT('',(-1.49,-1.99,0.77)); +#723 = LINE('',#724,#725); +#724 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#725 = VECTOR('',#726,1.); +#726 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#727 = ORIENTED_EDGE('',*,*,#728,.F.); +#728 = EDGE_CURVE('',#417,#721,#729,.T.); +#729 = LINE('',#730,#731); +#730 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#731 = VECTOR('',#732,1.); +#732 = DIRECTION('',(0.E+000,0.E+000,1.)); +#733 = ORIENTED_EDGE('',*,*,#416,.F.); +#734 = ORIENTED_EDGE('',*,*,#735,.T.); +#735 = EDGE_CURVE('',#409,#736,#738,.T.); +#736 = VERTEX_POINT('',#737); +#737 = CARTESIAN_POINT('',(-1.49,-1.625,0.2)); +#738 = LINE('',#739,#740); +#739 = CARTESIAN_POINT('',(-1.49,-1.625,1.E-002)); +#740 = VECTOR('',#741,1.); +#741 = DIRECTION('',(0.E+000,0.E+000,1.)); +#742 = ORIENTED_EDGE('',*,*,#743,.T.); +#743 = EDGE_CURVE('',#736,#744,#746,.T.); +#744 = VERTEX_POINT('',#745); +#745 = CARTESIAN_POINT('',(-1.49,-1.375,0.2)); +#746 = LINE('',#747,#748); +#747 = CARTESIAN_POINT('',(-1.49,0.1825,0.2)); +#748 = VECTOR('',#749,1.); +#749 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#750 = ORIENTED_EDGE('',*,*,#751,.T.); +#751 = EDGE_CURVE('',#744,#384,#752,.T.); +#752 = LINE('',#753,#754); +#753 = CARTESIAN_POINT('',(-1.49,-1.375,1.E-002)); +#754 = VECTOR('',#755,1.); +#755 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#756 = ORIENTED_EDGE('',*,*,#383,.F.); +#757 = ORIENTED_EDGE('',*,*,#758,.T.); +#758 = EDGE_CURVE('',#376,#759,#761,.T.); +#759 = VERTEX_POINT('',#760); +#760 = CARTESIAN_POINT('',(-1.49,-1.125,0.2)); +#761 = LINE('',#762,#763); +#762 = CARTESIAN_POINT('',(-1.49,-1.125,1.E-002)); +#763 = VECTOR('',#764,1.); +#764 = DIRECTION('',(0.E+000,0.E+000,1.)); +#765 = ORIENTED_EDGE('',*,*,#766,.T.); +#766 = EDGE_CURVE('',#759,#767,#769,.T.); +#767 = VERTEX_POINT('',#768); +#768 = CARTESIAN_POINT('',(-1.49,-0.875,0.2)); +#769 = LINE('',#770,#771); +#770 = CARTESIAN_POINT('',(-1.49,0.4325,0.2)); +#771 = VECTOR('',#772,1.); +#772 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#773 = ORIENTED_EDGE('',*,*,#774,.T.); +#774 = EDGE_CURVE('',#767,#351,#775,.T.); +#775 = LINE('',#776,#777); +#776 = CARTESIAN_POINT('',(-1.49,-0.875,1.E-002)); +#777 = VECTOR('',#778,1.); +#778 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#779 = ORIENTED_EDGE('',*,*,#350,.F.); +#780 = ORIENTED_EDGE('',*,*,#781,.T.); +#781 = EDGE_CURVE('',#343,#782,#784,.T.); +#782 = VERTEX_POINT('',#783); +#783 = CARTESIAN_POINT('',(-1.49,-0.625,0.2)); +#784 = LINE('',#785,#786); +#785 = CARTESIAN_POINT('',(-1.49,-0.625,1.E-002)); +#786 = VECTOR('',#787,1.); +#787 = DIRECTION('',(0.E+000,0.E+000,1.)); +#788 = ORIENTED_EDGE('',*,*,#789,.T.); +#789 = EDGE_CURVE('',#782,#790,#792,.T.); +#790 = VERTEX_POINT('',#791); +#791 = CARTESIAN_POINT('',(-1.49,-0.375,0.2)); +#792 = LINE('',#793,#794); +#793 = CARTESIAN_POINT('',(-1.49,0.6825,0.2)); +#794 = VECTOR('',#795,1.); +#795 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#796 = ORIENTED_EDGE('',*,*,#797,.T.); +#797 = EDGE_CURVE('',#790,#318,#798,.T.); +#798 = LINE('',#799,#800); +#799 = CARTESIAN_POINT('',(-1.49,-0.375,1.E-002)); +#800 = VECTOR('',#801,1.); +#801 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#802 = ORIENTED_EDGE('',*,*,#317,.F.); +#803 = ORIENTED_EDGE('',*,*,#804,.T.); +#804 = EDGE_CURVE('',#310,#805,#807,.T.); +#805 = VERTEX_POINT('',#806); +#806 = CARTESIAN_POINT('',(-1.49,-0.125,0.2)); +#807 = LINE('',#808,#809); +#808 = CARTESIAN_POINT('',(-1.49,-0.125,1.E-002)); +#809 = VECTOR('',#810,1.); +#810 = DIRECTION('',(0.E+000,0.E+000,1.)); +#811 = ORIENTED_EDGE('',*,*,#812,.T.); +#812 = EDGE_CURVE('',#805,#813,#815,.T.); +#813 = VERTEX_POINT('',#814); +#814 = CARTESIAN_POINT('',(-1.49,0.125,0.2)); +#815 = LINE('',#816,#817); +#816 = CARTESIAN_POINT('',(-1.49,0.9325,0.2)); +#817 = VECTOR('',#818,1.); +#818 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#819 = ORIENTED_EDGE('',*,*,#820,.T.); +#820 = EDGE_CURVE('',#813,#285,#821,.T.); +#821 = LINE('',#822,#823); +#822 = CARTESIAN_POINT('',(-1.49,0.125,1.E-002)); +#823 = VECTOR('',#824,1.); +#824 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#825 = ORIENTED_EDGE('',*,*,#284,.F.); +#826 = ORIENTED_EDGE('',*,*,#827,.T.); +#827 = EDGE_CURVE('',#277,#828,#830,.T.); +#828 = VERTEX_POINT('',#829); +#829 = CARTESIAN_POINT('',(-1.49,0.375,0.2)); +#830 = LINE('',#831,#832); +#831 = CARTESIAN_POINT('',(-1.49,0.375,1.E-002)); +#832 = VECTOR('',#833,1.); +#833 = DIRECTION('',(0.E+000,0.E+000,1.)); +#834 = ORIENTED_EDGE('',*,*,#835,.T.); +#835 = EDGE_CURVE('',#828,#836,#838,.T.); +#836 = VERTEX_POINT('',#837); +#837 = CARTESIAN_POINT('',(-1.49,0.625,0.2)); +#838 = LINE('',#839,#840); +#839 = CARTESIAN_POINT('',(-1.49,1.1825,0.2)); +#840 = VECTOR('',#841,1.); +#841 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#842 = ORIENTED_EDGE('',*,*,#843,.T.); +#843 = EDGE_CURVE('',#836,#252,#844,.T.); +#844 = LINE('',#845,#846); +#845 = CARTESIAN_POINT('',(-1.49,0.625,1.E-002)); +#846 = VECTOR('',#847,1.); +#847 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#848 = ORIENTED_EDGE('',*,*,#251,.F.); +#849 = ORIENTED_EDGE('',*,*,#79,.T.); +#850 = ORIENTED_EDGE('',*,*,#851,.T.); +#851 = EDGE_CURVE('',#72,#145,#852,.T.); +#852 = LINE('',#853,#854); +#853 = CARTESIAN_POINT('',(-1.49,1.4325,0.2)); +#854 = VECTOR('',#855,1.); +#855 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#856 = ORIENTED_EDGE('',*,*,#144,.T.); +#857 = ORIENTED_EDGE('',*,*,#242,.F.); +#858 = ORIENTED_EDGE('',*,*,#859,.T.); +#859 = EDGE_CURVE('',#235,#860,#862,.T.); +#860 = VERTEX_POINT('',#861); +#861 = CARTESIAN_POINT('',(-1.49,1.375,0.2)); +#862 = LINE('',#863,#864); +#863 = CARTESIAN_POINT('',(-1.49,1.375,1.E-002)); +#864 = VECTOR('',#865,1.); +#865 = DIRECTION('',(0.E+000,0.E+000,1.)); +#866 = ORIENTED_EDGE('',*,*,#867,.T.); +#867 = EDGE_CURVE('',#860,#868,#870,.T.); +#868 = VERTEX_POINT('',#869); +#869 = CARTESIAN_POINT('',(-1.49,1.625,0.2)); +#870 = LINE('',#871,#872); +#871 = CARTESIAN_POINT('',(-1.49,1.6825,0.2)); +#872 = VECTOR('',#873,1.); +#873 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#874 = ORIENTED_EDGE('',*,*,#875,.T.); +#875 = EDGE_CURVE('',#868,#210,#876,.T.); +#876 = LINE('',#877,#878); +#877 = CARTESIAN_POINT('',(-1.49,1.625,1.E-002)); +#878 = VECTOR('',#879,1.); +#879 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#880 = PLANE('',#881); +#881 = AXIS2_PLACEMENT_3D('',#882,#883,#884); +#882 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#883 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#884 = DIRECTION('',(0.E+000,0.E+000,1.)); +#885 = ADVANCED_FACE('',(#886),#892,.F.); +#886 = FACE_BOUND('',#887,.F.); +#887 = EDGE_LOOP('',(#888,#889,#890,#891)); +#888 = ORIENTED_EDGE('',*,*,#71,.F.); +#889 = ORIENTED_EDGE('',*,*,#175,.F.); +#890 = ORIENTED_EDGE('',*,*,#152,.F.); +#891 = ORIENTED_EDGE('',*,*,#851,.F.); +#892 = PLANE('',#893); +#893 = AXIS2_PLACEMENT_3D('',#894,#895,#896); +#894 = CARTESIAN_POINT('',(-1.5,0.875,0.2)); +#895 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#896 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#897 = ADVANCED_FACE('',(#898),#1084,.T.); +#898 = FACE_BOUND('',#899,.T.); +#899 = EDGE_LOOP('',(#900,#901,#909,#917,#923,#924,#932,#940,#946,#947, +#955,#963,#969,#970,#978,#986,#992,#993,#1001,#1009,#1015,#1016, +#1024,#1032,#1038,#1039,#1047,#1055,#1061,#1062,#1070,#1078)); +#900 = ORIENTED_EDGE('',*,*,#191,.F.); +#901 = ORIENTED_EDGE('',*,*,#902,.T.); +#902 = EDGE_CURVE('',#192,#903,#905,.T.); +#903 = VERTEX_POINT('',#904); +#904 = CARTESIAN_POINT('',(1.49,1.99,0.77)); +#905 = LINE('',#906,#907); +#906 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#907 = VECTOR('',#908,1.); +#908 = DIRECTION('',(0.E+000,0.E+000,1.)); +#909 = ORIENTED_EDGE('',*,*,#910,.T.); +#910 = EDGE_CURVE('',#903,#911,#913,.T.); +#911 = VERTEX_POINT('',#912); +#912 = CARTESIAN_POINT('',(1.49,-1.99,0.77)); +#913 = LINE('',#914,#915); +#914 = CARTESIAN_POINT('',(1.49,1.99,0.77)); +#915 = VECTOR('',#916,1.); +#916 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#917 = ORIENTED_EDGE('',*,*,#918,.F.); +#918 = EDGE_CURVE('',#425,#911,#919,.T.); +#919 = LINE('',#920,#921); +#920 = CARTESIAN_POINT('',(1.49,-1.99,2.E-002)); +#921 = VECTOR('',#922,1.); +#922 = DIRECTION('',(0.E+000,0.E+000,1.)); +#923 = ORIENTED_EDGE('',*,*,#432,.F.); +#924 = ORIENTED_EDGE('',*,*,#925,.T.); +#925 = EDGE_CURVE('',#433,#926,#928,.T.); +#926 = VERTEX_POINT('',#927); +#927 = CARTESIAN_POINT('',(1.49,-1.625,0.2)); +#928 = LINE('',#929,#930); +#929 = CARTESIAN_POINT('',(1.49,-1.625,1.E-002)); +#930 = VECTOR('',#931,1.); +#931 = DIRECTION('',(0.E+000,0.E+000,1.)); +#932 = ORIENTED_EDGE('',*,*,#933,.T.); +#933 = EDGE_CURVE('',#926,#934,#936,.T.); +#934 = VERTEX_POINT('',#935); +#935 = CARTESIAN_POINT('',(1.49,-1.375,0.2)); +#936 = LINE('',#937,#938); +#937 = CARTESIAN_POINT('',(1.49,0.3075,0.2)); +#938 = VECTOR('',#939,1.); +#939 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#940 = ORIENTED_EDGE('',*,*,#941,.T.); +#941 = EDGE_CURVE('',#934,#458,#942,.T.); +#942 = LINE('',#943,#944); +#943 = CARTESIAN_POINT('',(1.49,-1.375,1.E-002)); +#944 = VECTOR('',#945,1.); +#945 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#946 = ORIENTED_EDGE('',*,*,#465,.F.); +#947 = ORIENTED_EDGE('',*,*,#948,.T.); +#948 = EDGE_CURVE('',#466,#949,#951,.T.); +#949 = VERTEX_POINT('',#950); +#950 = CARTESIAN_POINT('',(1.49,-1.125,0.2)); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(1.49,-1.125,1.E-002)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(0.E+000,0.E+000,1.)); +#955 = ORIENTED_EDGE('',*,*,#956,.T.); +#956 = EDGE_CURVE('',#949,#957,#959,.T.); +#957 = VERTEX_POINT('',#958); +#958 = CARTESIAN_POINT('',(1.49,-0.875,0.2)); +#959 = LINE('',#960,#961); +#960 = CARTESIAN_POINT('',(1.49,0.5575,0.2)); +#961 = VECTOR('',#962,1.); +#962 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#963 = ORIENTED_EDGE('',*,*,#964,.T.); +#964 = EDGE_CURVE('',#957,#491,#965,.T.); +#965 = LINE('',#966,#967); +#966 = CARTESIAN_POINT('',(1.49,-0.875,1.E-002)); +#967 = VECTOR('',#968,1.); +#968 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#969 = ORIENTED_EDGE('',*,*,#498,.F.); +#970 = ORIENTED_EDGE('',*,*,#971,.T.); +#971 = EDGE_CURVE('',#499,#972,#974,.T.); +#972 = VERTEX_POINT('',#973); +#973 = CARTESIAN_POINT('',(1.49,-0.625,0.2)); +#974 = LINE('',#975,#976); +#975 = CARTESIAN_POINT('',(1.49,-0.625,1.E-002)); +#976 = VECTOR('',#977,1.); +#977 = DIRECTION('',(0.E+000,0.E+000,1.)); +#978 = ORIENTED_EDGE('',*,*,#979,.T.); +#979 = EDGE_CURVE('',#972,#980,#982,.T.); +#980 = VERTEX_POINT('',#981); +#981 = CARTESIAN_POINT('',(1.49,-0.375,0.2)); +#982 = LINE('',#983,#984); +#983 = CARTESIAN_POINT('',(1.49,0.8075,0.2)); +#984 = VECTOR('',#985,1.); +#985 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#986 = ORIENTED_EDGE('',*,*,#987,.T.); +#987 = EDGE_CURVE('',#980,#524,#988,.T.); +#988 = LINE('',#989,#990); +#989 = CARTESIAN_POINT('',(1.49,-0.375,1.E-002)); +#990 = VECTOR('',#991,1.); +#991 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#992 = ORIENTED_EDGE('',*,*,#531,.F.); +#993 = ORIENTED_EDGE('',*,*,#994,.T.); +#994 = EDGE_CURVE('',#532,#995,#997,.T.); +#995 = VERTEX_POINT('',#996); +#996 = CARTESIAN_POINT('',(1.49,-0.125,0.2)); +#997 = LINE('',#998,#999); +#998 = CARTESIAN_POINT('',(1.49,-0.125,1.E-002)); +#999 = VECTOR('',#1000,1.); +#1000 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1001 = ORIENTED_EDGE('',*,*,#1002,.T.); +#1002 = EDGE_CURVE('',#995,#1003,#1005,.T.); +#1003 = VERTEX_POINT('',#1004); +#1004 = CARTESIAN_POINT('',(1.49,0.125,0.2)); +#1005 = LINE('',#1006,#1007); +#1006 = CARTESIAN_POINT('',(1.49,1.0575,0.2)); +#1007 = VECTOR('',#1008,1.); +#1008 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#1009 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1010 = EDGE_CURVE('',#1003,#557,#1011,.T.); +#1011 = LINE('',#1012,#1013); +#1012 = CARTESIAN_POINT('',(1.49,0.125,1.E-002)); +#1013 = VECTOR('',#1014,1.); +#1014 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1015 = ORIENTED_EDGE('',*,*,#564,.F.); +#1016 = ORIENTED_EDGE('',*,*,#1017,.T.); +#1017 = EDGE_CURVE('',#565,#1018,#1020,.T.); +#1018 = VERTEX_POINT('',#1019); +#1019 = CARTESIAN_POINT('',(1.49,0.375,0.2)); +#1020 = LINE('',#1021,#1022); +#1021 = CARTESIAN_POINT('',(1.49,0.375,1.E-002)); +#1022 = VECTOR('',#1023,1.); +#1023 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1024 = ORIENTED_EDGE('',*,*,#1025,.T.); +#1025 = EDGE_CURVE('',#1018,#1026,#1028,.T.); +#1026 = VERTEX_POINT('',#1027); +#1027 = CARTESIAN_POINT('',(1.49,0.625,0.2)); +#1028 = LINE('',#1029,#1030); +#1029 = CARTESIAN_POINT('',(1.49,1.3075,0.2)); +#1030 = VECTOR('',#1031,1.); +#1031 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#1032 = ORIENTED_EDGE('',*,*,#1033,.T.); +#1033 = EDGE_CURVE('',#1026,#590,#1034,.T.); +#1034 = LINE('',#1035,#1036); +#1035 = CARTESIAN_POINT('',(1.49,0.625,1.E-002)); +#1036 = VECTOR('',#1037,1.); +#1037 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1038 = ORIENTED_EDGE('',*,*,#597,.F.); +#1039 = ORIENTED_EDGE('',*,*,#1040,.T.); +#1040 = EDGE_CURVE('',#598,#1041,#1043,.T.); +#1041 = VERTEX_POINT('',#1042); +#1042 = CARTESIAN_POINT('',(1.49,0.875,0.2)); +#1043 = LINE('',#1044,#1045); +#1044 = CARTESIAN_POINT('',(1.49,0.875,1.E-002)); +#1045 = VECTOR('',#1046,1.); +#1046 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1047 = ORIENTED_EDGE('',*,*,#1048,.T.); +#1048 = EDGE_CURVE('',#1041,#1049,#1051,.T.); +#1049 = VERTEX_POINT('',#1050); +#1050 = CARTESIAN_POINT('',(1.49,1.125,0.2)); +#1051 = LINE('',#1052,#1053); +#1052 = CARTESIAN_POINT('',(1.49,1.5575,0.2)); +#1053 = VECTOR('',#1054,1.); +#1054 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#1055 = ORIENTED_EDGE('',*,*,#1056,.T.); +#1056 = EDGE_CURVE('',#1049,#623,#1057,.T.); +#1057 = LINE('',#1058,#1059); +#1058 = CARTESIAN_POINT('',(1.49,1.125,1.E-002)); +#1059 = VECTOR('',#1060,1.); +#1060 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1061 = ORIENTED_EDGE('',*,*,#630,.F.); +#1062 = ORIENTED_EDGE('',*,*,#1063,.T.); +#1063 = EDGE_CURVE('',#631,#1064,#1066,.T.); +#1064 = VERTEX_POINT('',#1065); +#1065 = CARTESIAN_POINT('',(1.49,1.375,0.2)); +#1066 = LINE('',#1067,#1068); +#1067 = CARTESIAN_POINT('',(1.49,1.375,1.E-002)); +#1068 = VECTOR('',#1069,1.); +#1069 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1070 = ORIENTED_EDGE('',*,*,#1071,.T.); +#1071 = EDGE_CURVE('',#1064,#1072,#1074,.T.); +#1072 = VERTEX_POINT('',#1073); +#1073 = CARTESIAN_POINT('',(1.49,1.625,0.2)); +#1074 = LINE('',#1075,#1076); +#1075 = CARTESIAN_POINT('',(1.49,1.8075,0.2)); +#1076 = VECTOR('',#1077,1.); +#1077 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#1078 = ORIENTED_EDGE('',*,*,#1079,.T.); +#1079 = EDGE_CURVE('',#1072,#194,#1080,.T.); +#1080 = LINE('',#1081,#1082); +#1081 = CARTESIAN_POINT('',(1.49,1.625,1.E-002)); +#1082 = VECTOR('',#1083,1.); +#1083 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1084 = PLANE('',#1085); +#1085 = AXIS2_PLACEMENT_3D('',#1086,#1087,#1088); +#1086 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#1087 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1088 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1089 = ADVANCED_FACE('',(#1090),#1101,.F.); +#1090 = FACE_BOUND('',#1091,.F.); +#1091 = EDGE_LOOP('',(#1092,#1093,#1094,#1095)); +#1092 = ORIENTED_EDGE('',*,*,#712,.F.); +#1093 = ORIENTED_EDGE('',*,*,#201,.T.); +#1094 = ORIENTED_EDGE('',*,*,#902,.T.); +#1095 = ORIENTED_EDGE('',*,*,#1096,.F.); +#1096 = EDGE_CURVE('',#713,#903,#1097,.T.); +#1097 = LINE('',#1098,#1099); +#1098 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#1099 = VECTOR('',#1100,1.); +#1100 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1101 = PLANE('',#1102); +#1102 = AXIS2_PLACEMENT_3D('',#1103,#1104,#1105); +#1103 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#1104 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1105 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1106 = ADVANCED_FACE('',(#1107),#1141,.F.); +#1107 = FACE_BOUND('',#1108,.F.); +#1108 = EDGE_LOOP('',(#1109,#1119,#1127,#1133,#1134,#1135)); +#1109 = ORIENTED_EDGE('',*,*,#1110,.F.); +#1110 = EDGE_CURVE('',#1111,#1113,#1115,.T.); +#1111 = VERTEX_POINT('',#1112); +#1112 = CARTESIAN_POINT('',(1.5,1.625,0.E+000)); +#1113 = VERTEX_POINT('',#1114); +#1114 = CARTESIAN_POINT('',(1.225,1.625,0.E+000)); +#1115 = LINE('',#1116,#1117); +#1116 = CARTESIAN_POINT('',(1.5,1.625,0.E+000)); +#1117 = VECTOR('',#1118,1.); +#1118 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1119 = ORIENTED_EDGE('',*,*,#1120,.T.); +#1120 = EDGE_CURVE('',#1111,#1121,#1123,.T.); +#1121 = VERTEX_POINT('',#1122); +#1122 = CARTESIAN_POINT('',(1.5,1.625,0.2)); +#1123 = LINE('',#1124,#1125); +#1124 = CARTESIAN_POINT('',(1.5,1.625,0.E+000)); +#1125 = VECTOR('',#1126,1.); +#1126 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1127 = ORIENTED_EDGE('',*,*,#1128,.T.); +#1128 = EDGE_CURVE('',#1121,#1072,#1129,.T.); +#1129 = LINE('',#1130,#1131); +#1130 = CARTESIAN_POINT('',(1.5,1.625,0.2)); +#1131 = VECTOR('',#1132,1.); +#1132 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1133 = ORIENTED_EDGE('',*,*,#1079,.T.); +#1134 = ORIENTED_EDGE('',*,*,#655,.F.); +#1135 = ORIENTED_EDGE('',*,*,#1136,.F.); +#1136 = EDGE_CURVE('',#1113,#647,#1137,.T.); +#1137 = LINE('',#1138,#1139); +#1138 = CARTESIAN_POINT('',(1.225,1.625,0.E+000)); +#1139 = VECTOR('',#1140,1.); +#1140 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1141 = PLANE('',#1142); +#1142 = AXIS2_PLACEMENT_3D('',#1143,#1144,#1145); +#1143 = CARTESIAN_POINT('',(1.5,1.625,0.E+000)); +#1144 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1145 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1146 = ADVANCED_FACE('',(#1147),#1166,.T.); +#1147 = FACE_BOUND('',#1148,.F.); +#1148 = EDGE_LOOP('',(#1149,#1158,#1159,#1160)); +#1149 = ORIENTED_EDGE('',*,*,#1150,.F.); +#1150 = EDGE_CURVE('',#1113,#1151,#1153,.T.); +#1151 = VERTEX_POINT('',#1152); +#1152 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#1153 = CIRCLE('',#1154,0.125); +#1154 = AXIS2_PLACEMENT_3D('',#1155,#1156,#1157); +#1155 = CARTESIAN_POINT('',(1.225,1.5,0.E+000)); +#1156 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1157 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1158 = ORIENTED_EDGE('',*,*,#1136,.T.); +#1159 = ORIENTED_EDGE('',*,*,#646,.F.); +#1160 = ORIENTED_EDGE('',*,*,#1161,.F.); +#1161 = EDGE_CURVE('',#1151,#639,#1162,.T.); +#1162 = LINE('',#1163,#1164); +#1163 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#1164 = VECTOR('',#1165,1.); +#1165 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1166 = CYLINDRICAL_SURFACE('',#1167,0.125); +#1167 = AXIS2_PLACEMENT_3D('',#1168,#1169,#1170); +#1168 = CARTESIAN_POINT('',(1.225,1.5,0.E+000)); +#1169 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1170 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1171 = ADVANCED_FACE('',(#1172),#1206,.F.); +#1172 = FACE_BOUND('',#1173,.F.); +#1173 = EDGE_LOOP('',(#1174,#1184,#1190,#1191,#1192,#1200)); +#1174 = ORIENTED_EDGE('',*,*,#1175,.F.); +#1175 = EDGE_CURVE('',#1176,#1178,#1180,.T.); +#1176 = VERTEX_POINT('',#1177); +#1177 = CARTESIAN_POINT('',(-1.225,1.625,0.E+000)); +#1178 = VERTEX_POINT('',#1179); +#1179 = CARTESIAN_POINT('',(-1.5,1.625,0.E+000)); +#1180 = LINE('',#1181,#1182); +#1181 = CARTESIAN_POINT('',(-1.225,1.625,0.E+000)); +#1182 = VECTOR('',#1183,1.); +#1183 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1184 = ORIENTED_EDGE('',*,*,#1185,.T.); +#1185 = EDGE_CURVE('',#1176,#218,#1186,.T.); +#1186 = LINE('',#1187,#1188); +#1187 = CARTESIAN_POINT('',(-1.225,1.625,0.E+000)); +#1188 = VECTOR('',#1189,1.); +#1189 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1190 = ORIENTED_EDGE('',*,*,#217,.F.); +#1191 = ORIENTED_EDGE('',*,*,#875,.F.); +#1192 = ORIENTED_EDGE('',*,*,#1193,.T.); +#1193 = EDGE_CURVE('',#868,#1194,#1196,.T.); +#1194 = VERTEX_POINT('',#1195); +#1195 = CARTESIAN_POINT('',(-1.5,1.625,0.2)); +#1196 = LINE('',#1197,#1198); +#1197 = CARTESIAN_POINT('',(-1.225,1.625,0.2)); +#1198 = VECTOR('',#1199,1.); +#1199 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1200 = ORIENTED_EDGE('',*,*,#1201,.F.); +#1201 = EDGE_CURVE('',#1178,#1194,#1202,.T.); +#1202 = LINE('',#1203,#1204); +#1203 = CARTESIAN_POINT('',(-1.5,1.625,0.E+000)); +#1204 = VECTOR('',#1205,1.); +#1205 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1206 = PLANE('',#1207); +#1207 = AXIS2_PLACEMENT_3D('',#1208,#1209,#1210); +#1208 = CARTESIAN_POINT('',(-1.225,1.625,0.E+000)); +#1209 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1210 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1211 = ADVANCED_FACE('',(#1212),#1239,.F.); +#1212 = FACE_BOUND('',#1213,.F.); +#1213 = EDGE_LOOP('',(#1214,#1222,#1223,#1224,#1225,#1233)); +#1214 = ORIENTED_EDGE('',*,*,#1215,.F.); +#1215 = EDGE_CURVE('',#1151,#1216,#1218,.T.); +#1216 = VERTEX_POINT('',#1217); +#1217 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#1218 = LINE('',#1219,#1220); +#1219 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#1220 = VECTOR('',#1221,1.); +#1221 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1222 = ORIENTED_EDGE('',*,*,#1161,.T.); +#1223 = ORIENTED_EDGE('',*,*,#638,.F.); +#1224 = ORIENTED_EDGE('',*,*,#1063,.T.); +#1225 = ORIENTED_EDGE('',*,*,#1226,.T.); +#1226 = EDGE_CURVE('',#1064,#1227,#1229,.T.); +#1227 = VERTEX_POINT('',#1228); +#1228 = CARTESIAN_POINT('',(1.5,1.375,0.2)); +#1229 = LINE('',#1230,#1231); +#1230 = CARTESIAN_POINT('',(1.225,1.375,0.2)); +#1231 = VECTOR('',#1232,1.); +#1232 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1233 = ORIENTED_EDGE('',*,*,#1234,.F.); +#1234 = EDGE_CURVE('',#1216,#1227,#1235,.T.); +#1235 = LINE('',#1236,#1237); +#1236 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#1237 = VECTOR('',#1238,1.); +#1238 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1239 = PLANE('',#1240); +#1240 = AXIS2_PLACEMENT_3D('',#1241,#1242,#1243); +#1241 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#1242 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1243 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1244 = ADVANCED_FACE('',(#1245),#1264,.T.); +#1245 = FACE_BOUND('',#1246,.F.); +#1246 = EDGE_LOOP('',(#1247,#1256,#1262,#1263)); +#1247 = ORIENTED_EDGE('',*,*,#1248,.F.); +#1248 = EDGE_CURVE('',#1249,#1176,#1251,.T.); +#1249 = VERTEX_POINT('',#1250); +#1250 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1251 = CIRCLE('',#1252,0.125); +#1252 = AXIS2_PLACEMENT_3D('',#1253,#1254,#1255); +#1253 = CARTESIAN_POINT('',(-1.225,1.5,0.E+000)); +#1254 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1255 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1256 = ORIENTED_EDGE('',*,*,#1257,.T.); +#1257 = EDGE_CURVE('',#1249,#226,#1258,.T.); +#1258 = LINE('',#1259,#1260); +#1259 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1260 = VECTOR('',#1261,1.); +#1261 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1262 = ORIENTED_EDGE('',*,*,#225,.F.); +#1263 = ORIENTED_EDGE('',*,*,#1185,.F.); +#1264 = CYLINDRICAL_SURFACE('',#1265,0.125); +#1265 = AXIS2_PLACEMENT_3D('',#1266,#1267,#1268); +#1266 = CARTESIAN_POINT('',(-1.225,1.5,0.E+000)); +#1267 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1268 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1269 = ADVANCED_FACE('',(#1270),#1297,.F.); +#1270 = FACE_BOUND('',#1271,.F.); +#1271 = EDGE_LOOP('',(#1272,#1280,#1288,#1294,#1295,#1296)); +#1272 = ORIENTED_EDGE('',*,*,#1273,.F.); +#1273 = EDGE_CURVE('',#1274,#1249,#1276,.T.); +#1274 = VERTEX_POINT('',#1275); +#1275 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1276 = LINE('',#1277,#1278); +#1277 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1278 = VECTOR('',#1279,1.); +#1279 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1280 = ORIENTED_EDGE('',*,*,#1281,.T.); +#1281 = EDGE_CURVE('',#1274,#1282,#1284,.T.); +#1282 = VERTEX_POINT('',#1283); +#1283 = CARTESIAN_POINT('',(-1.5,1.375,0.2)); +#1284 = LINE('',#1285,#1286); +#1285 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1286 = VECTOR('',#1287,1.); +#1287 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1288 = ORIENTED_EDGE('',*,*,#1289,.T.); +#1289 = EDGE_CURVE('',#1282,#860,#1290,.T.); +#1290 = LINE('',#1291,#1292); +#1291 = CARTESIAN_POINT('',(-1.5,1.375,0.2)); +#1292 = VECTOR('',#1293,1.); +#1293 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1294 = ORIENTED_EDGE('',*,*,#859,.F.); +#1295 = ORIENTED_EDGE('',*,*,#234,.F.); +#1296 = ORIENTED_EDGE('',*,*,#1257,.F.); +#1297 = PLANE('',#1298); +#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301); +#1299 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1300 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1301 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1302 = ADVANCED_FACE('',(#1303),#1337,.F.); +#1303 = FACE_BOUND('',#1304,.F.); +#1304 = EDGE_LOOP('',(#1305,#1315,#1323,#1329,#1330,#1331)); +#1305 = ORIENTED_EDGE('',*,*,#1306,.F.); +#1306 = EDGE_CURVE('',#1307,#1309,#1311,.T.); +#1307 = VERTEX_POINT('',#1308); +#1308 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1309 = VERTEX_POINT('',#1310); +#1310 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1311 = LINE('',#1312,#1313); +#1312 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1313 = VECTOR('',#1314,1.); +#1314 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1315 = ORIENTED_EDGE('',*,*,#1316,.T.); +#1316 = EDGE_CURVE('',#1307,#1317,#1319,.T.); +#1317 = VERTEX_POINT('',#1318); +#1318 = CARTESIAN_POINT('',(1.5,1.125,0.2)); +#1319 = LINE('',#1320,#1321); +#1320 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1321 = VECTOR('',#1322,1.); +#1322 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1323 = ORIENTED_EDGE('',*,*,#1324,.T.); +#1324 = EDGE_CURVE('',#1317,#1049,#1325,.T.); +#1325 = LINE('',#1326,#1327); +#1326 = CARTESIAN_POINT('',(1.5,1.125,0.2)); +#1327 = VECTOR('',#1328,1.); +#1328 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1329 = ORIENTED_EDGE('',*,*,#1056,.T.); +#1330 = ORIENTED_EDGE('',*,*,#622,.F.); +#1331 = ORIENTED_EDGE('',*,*,#1332,.F.); +#1332 = EDGE_CURVE('',#1309,#614,#1333,.T.); +#1333 = LINE('',#1334,#1335); +#1334 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1335 = VECTOR('',#1336,1.); +#1336 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1337 = PLANE('',#1338); +#1338 = AXIS2_PLACEMENT_3D('',#1339,#1340,#1341); +#1339 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1340 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1341 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1342 = ADVANCED_FACE('',(#1343),#1362,.T.); +#1343 = FACE_BOUND('',#1344,.F.); +#1344 = EDGE_LOOP('',(#1345,#1354,#1355,#1356)); +#1345 = ORIENTED_EDGE('',*,*,#1346,.F.); +#1346 = EDGE_CURVE('',#1309,#1347,#1349,.T.); +#1347 = VERTEX_POINT('',#1348); +#1348 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1349 = CIRCLE('',#1350,0.125); +#1350 = AXIS2_PLACEMENT_3D('',#1351,#1352,#1353); +#1351 = CARTESIAN_POINT('',(1.225,1.,0.E+000)); +#1352 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1353 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1354 = ORIENTED_EDGE('',*,*,#1332,.T.); +#1355 = ORIENTED_EDGE('',*,*,#613,.F.); +#1356 = ORIENTED_EDGE('',*,*,#1357,.F.); +#1357 = EDGE_CURVE('',#1347,#606,#1358,.T.); +#1358 = LINE('',#1359,#1360); +#1359 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1360 = VECTOR('',#1361,1.); +#1361 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1362 = CYLINDRICAL_SURFACE('',#1363,0.125); +#1363 = AXIS2_PLACEMENT_3D('',#1364,#1365,#1366); +#1364 = CARTESIAN_POINT('',(1.225,1.,0.E+000)); +#1365 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1366 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1367 = ADVANCED_FACE('',(#1368),#1395,.F.); +#1368 = FACE_BOUND('',#1369,.F.); +#1369 = EDGE_LOOP('',(#1370,#1378,#1379,#1380,#1381,#1389)); +#1370 = ORIENTED_EDGE('',*,*,#1371,.F.); +#1371 = EDGE_CURVE('',#1347,#1372,#1374,.T.); +#1372 = VERTEX_POINT('',#1373); +#1373 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1374 = LINE('',#1375,#1376); +#1375 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1376 = VECTOR('',#1377,1.); +#1377 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1378 = ORIENTED_EDGE('',*,*,#1357,.T.); +#1379 = ORIENTED_EDGE('',*,*,#605,.F.); +#1380 = ORIENTED_EDGE('',*,*,#1040,.T.); +#1381 = ORIENTED_EDGE('',*,*,#1382,.T.); +#1382 = EDGE_CURVE('',#1041,#1383,#1385,.T.); +#1383 = VERTEX_POINT('',#1384); +#1384 = CARTESIAN_POINT('',(1.5,0.875,0.2)); +#1385 = LINE('',#1386,#1387); +#1386 = CARTESIAN_POINT('',(1.225,0.875,0.2)); +#1387 = VECTOR('',#1388,1.); +#1388 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1389 = ORIENTED_EDGE('',*,*,#1390,.F.); +#1390 = EDGE_CURVE('',#1372,#1383,#1391,.T.); +#1391 = LINE('',#1392,#1393); +#1392 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1393 = VECTOR('',#1394,1.); +#1394 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1395 = PLANE('',#1396); +#1396 = AXIS2_PLACEMENT_3D('',#1397,#1398,#1399); +#1397 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1398 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1399 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1400 = ADVANCED_FACE('',(#1401),#1435,.F.); +#1401 = FACE_BOUND('',#1402,.F.); +#1402 = EDGE_LOOP('',(#1403,#1413,#1421,#1427,#1428,#1429)); +#1403 = ORIENTED_EDGE('',*,*,#1404,.F.); +#1404 = EDGE_CURVE('',#1405,#1407,#1409,.T.); +#1405 = VERTEX_POINT('',#1406); +#1406 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1407 = VERTEX_POINT('',#1408); +#1408 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1409 = LINE('',#1410,#1411); +#1410 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1411 = VECTOR('',#1412,1.); +#1412 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1413 = ORIENTED_EDGE('',*,*,#1414,.T.); +#1414 = EDGE_CURVE('',#1405,#1415,#1417,.T.); +#1415 = VERTEX_POINT('',#1416); +#1416 = CARTESIAN_POINT('',(1.5,0.625,0.2)); +#1417 = LINE('',#1418,#1419); +#1418 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1419 = VECTOR('',#1420,1.); +#1420 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1421 = ORIENTED_EDGE('',*,*,#1422,.T.); +#1422 = EDGE_CURVE('',#1415,#1026,#1423,.T.); +#1423 = LINE('',#1424,#1425); +#1424 = CARTESIAN_POINT('',(1.5,0.625,0.2)); +#1425 = VECTOR('',#1426,1.); +#1426 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1427 = ORIENTED_EDGE('',*,*,#1033,.T.); +#1428 = ORIENTED_EDGE('',*,*,#589,.F.); +#1429 = ORIENTED_EDGE('',*,*,#1430,.F.); +#1430 = EDGE_CURVE('',#1407,#581,#1431,.T.); +#1431 = LINE('',#1432,#1433); +#1432 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1433 = VECTOR('',#1434,1.); +#1434 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1435 = PLANE('',#1436); +#1436 = AXIS2_PLACEMENT_3D('',#1437,#1438,#1439); +#1437 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1438 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1439 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1440 = ADVANCED_FACE('',(#1441),#1460,.T.); +#1441 = FACE_BOUND('',#1442,.F.); +#1442 = EDGE_LOOP('',(#1443,#1452,#1453,#1454)); +#1443 = ORIENTED_EDGE('',*,*,#1444,.F.); +#1444 = EDGE_CURVE('',#1407,#1445,#1447,.T.); +#1445 = VERTEX_POINT('',#1446); +#1446 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1447 = CIRCLE('',#1448,0.125); +#1448 = AXIS2_PLACEMENT_3D('',#1449,#1450,#1451); +#1449 = CARTESIAN_POINT('',(1.225,0.5,0.E+000)); +#1450 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1451 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1452 = ORIENTED_EDGE('',*,*,#1430,.T.); +#1453 = ORIENTED_EDGE('',*,*,#580,.F.); +#1454 = ORIENTED_EDGE('',*,*,#1455,.F.); +#1455 = EDGE_CURVE('',#1445,#573,#1456,.T.); +#1456 = LINE('',#1457,#1458); +#1457 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1458 = VECTOR('',#1459,1.); +#1459 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1460 = CYLINDRICAL_SURFACE('',#1461,0.125); +#1461 = AXIS2_PLACEMENT_3D('',#1462,#1463,#1464); +#1462 = CARTESIAN_POINT('',(1.225,0.5,0.E+000)); +#1463 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1464 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1465 = ADVANCED_FACE('',(#1466),#1500,.F.); +#1466 = FACE_BOUND('',#1467,.F.); +#1467 = EDGE_LOOP('',(#1468,#1478,#1484,#1485,#1486,#1494)); +#1468 = ORIENTED_EDGE('',*,*,#1469,.F.); +#1469 = EDGE_CURVE('',#1470,#1472,#1474,.T.); +#1470 = VERTEX_POINT('',#1471); +#1471 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1472 = VERTEX_POINT('',#1473); +#1473 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1474 = LINE('',#1475,#1476); +#1475 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1476 = VECTOR('',#1477,1.); +#1477 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1478 = ORIENTED_EDGE('',*,*,#1479,.T.); +#1479 = EDGE_CURVE('',#1470,#260,#1480,.T.); +#1480 = LINE('',#1481,#1482); +#1481 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1482 = VECTOR('',#1483,1.); +#1483 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1484 = ORIENTED_EDGE('',*,*,#259,.F.); +#1485 = ORIENTED_EDGE('',*,*,#843,.F.); +#1486 = ORIENTED_EDGE('',*,*,#1487,.T.); +#1487 = EDGE_CURVE('',#836,#1488,#1490,.T.); +#1488 = VERTEX_POINT('',#1489); +#1489 = CARTESIAN_POINT('',(-1.5,0.625,0.2)); +#1490 = LINE('',#1491,#1492); +#1491 = CARTESIAN_POINT('',(-1.225,0.625,0.2)); +#1492 = VECTOR('',#1493,1.); +#1493 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1494 = ORIENTED_EDGE('',*,*,#1495,.F.); +#1495 = EDGE_CURVE('',#1472,#1488,#1496,.T.); +#1496 = LINE('',#1497,#1498); +#1497 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1498 = VECTOR('',#1499,1.); +#1499 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1500 = PLANE('',#1501); +#1501 = AXIS2_PLACEMENT_3D('',#1502,#1503,#1504); +#1502 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1503 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1504 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1505 = ADVANCED_FACE('',(#1506),#1533,.F.); +#1506 = FACE_BOUND('',#1507,.F.); +#1507 = EDGE_LOOP('',(#1508,#1516,#1517,#1518,#1519,#1527)); +#1508 = ORIENTED_EDGE('',*,*,#1509,.F.); +#1509 = EDGE_CURVE('',#1445,#1510,#1512,.T.); +#1510 = VERTEX_POINT('',#1511); +#1511 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1512 = LINE('',#1513,#1514); +#1513 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1514 = VECTOR('',#1515,1.); +#1515 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1516 = ORIENTED_EDGE('',*,*,#1455,.T.); +#1517 = ORIENTED_EDGE('',*,*,#572,.F.); +#1518 = ORIENTED_EDGE('',*,*,#1017,.T.); +#1519 = ORIENTED_EDGE('',*,*,#1520,.T.); +#1520 = EDGE_CURVE('',#1018,#1521,#1523,.T.); +#1521 = VERTEX_POINT('',#1522); +#1522 = CARTESIAN_POINT('',(1.5,0.375,0.2)); +#1523 = LINE('',#1524,#1525); +#1524 = CARTESIAN_POINT('',(1.225,0.375,0.2)); +#1525 = VECTOR('',#1526,1.); +#1526 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1527 = ORIENTED_EDGE('',*,*,#1528,.F.); +#1528 = EDGE_CURVE('',#1510,#1521,#1529,.T.); +#1529 = LINE('',#1530,#1531); +#1530 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1531 = VECTOR('',#1532,1.); +#1532 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1533 = PLANE('',#1534); +#1534 = AXIS2_PLACEMENT_3D('',#1535,#1536,#1537); +#1535 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1536 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1537 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1538 = ADVANCED_FACE('',(#1539),#1558,.T.); +#1539 = FACE_BOUND('',#1540,.F.); +#1540 = EDGE_LOOP('',(#1541,#1550,#1556,#1557)); +#1541 = ORIENTED_EDGE('',*,*,#1542,.F.); +#1542 = EDGE_CURVE('',#1543,#1470,#1545,.T.); +#1543 = VERTEX_POINT('',#1544); +#1544 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1545 = CIRCLE('',#1546,0.125); +#1546 = AXIS2_PLACEMENT_3D('',#1547,#1548,#1549); +#1547 = CARTESIAN_POINT('',(-1.225,0.5,0.E+000)); +#1548 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1549 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1550 = ORIENTED_EDGE('',*,*,#1551,.T.); +#1551 = EDGE_CURVE('',#1543,#268,#1552,.T.); +#1552 = LINE('',#1553,#1554); +#1553 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1554 = VECTOR('',#1555,1.); +#1555 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1556 = ORIENTED_EDGE('',*,*,#267,.F.); +#1557 = ORIENTED_EDGE('',*,*,#1479,.F.); +#1558 = CYLINDRICAL_SURFACE('',#1559,0.125); +#1559 = AXIS2_PLACEMENT_3D('',#1560,#1561,#1562); +#1560 = CARTESIAN_POINT('',(-1.225,0.5,0.E+000)); +#1561 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1562 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1563 = ADVANCED_FACE('',(#1564),#1591,.F.); +#1564 = FACE_BOUND('',#1565,.F.); +#1565 = EDGE_LOOP('',(#1566,#1574,#1582,#1588,#1589,#1590)); +#1566 = ORIENTED_EDGE('',*,*,#1567,.F.); +#1567 = EDGE_CURVE('',#1568,#1543,#1570,.T.); +#1568 = VERTEX_POINT('',#1569); +#1569 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1570 = LINE('',#1571,#1572); +#1571 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1572 = VECTOR('',#1573,1.); +#1573 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1574 = ORIENTED_EDGE('',*,*,#1575,.T.); +#1575 = EDGE_CURVE('',#1568,#1576,#1578,.T.); +#1576 = VERTEX_POINT('',#1577); +#1577 = CARTESIAN_POINT('',(-1.5,0.375,0.2)); +#1578 = LINE('',#1579,#1580); +#1579 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1580 = VECTOR('',#1581,1.); +#1581 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1582 = ORIENTED_EDGE('',*,*,#1583,.T.); +#1583 = EDGE_CURVE('',#1576,#828,#1584,.T.); +#1584 = LINE('',#1585,#1586); +#1585 = CARTESIAN_POINT('',(-1.5,0.375,0.2)); +#1586 = VECTOR('',#1587,1.); +#1587 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1588 = ORIENTED_EDGE('',*,*,#827,.F.); +#1589 = ORIENTED_EDGE('',*,*,#276,.F.); +#1590 = ORIENTED_EDGE('',*,*,#1551,.F.); +#1591 = PLANE('',#1592); +#1592 = AXIS2_PLACEMENT_3D('',#1593,#1594,#1595); +#1593 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1594 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1595 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1596 = ADVANCED_FACE('',(#1597),#1631,.F.); +#1597 = FACE_BOUND('',#1598,.F.); +#1598 = EDGE_LOOP('',(#1599,#1609,#1617,#1623,#1624,#1625)); +#1599 = ORIENTED_EDGE('',*,*,#1600,.F.); +#1600 = EDGE_CURVE('',#1601,#1603,#1605,.T.); +#1601 = VERTEX_POINT('',#1602); +#1602 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1603 = VERTEX_POINT('',#1604); +#1604 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1605 = LINE('',#1606,#1607); +#1606 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1607 = VECTOR('',#1608,1.); +#1608 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1609 = ORIENTED_EDGE('',*,*,#1610,.T.); +#1610 = EDGE_CURVE('',#1601,#1611,#1613,.T.); +#1611 = VERTEX_POINT('',#1612); +#1612 = CARTESIAN_POINT('',(1.5,0.125,0.2)); +#1613 = LINE('',#1614,#1615); +#1614 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1615 = VECTOR('',#1616,1.); +#1616 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1617 = ORIENTED_EDGE('',*,*,#1618,.T.); +#1618 = EDGE_CURVE('',#1611,#1003,#1619,.T.); +#1619 = LINE('',#1620,#1621); +#1620 = CARTESIAN_POINT('',(1.5,0.125,0.2)); +#1621 = VECTOR('',#1622,1.); +#1622 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1623 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1624 = ORIENTED_EDGE('',*,*,#556,.F.); +#1625 = ORIENTED_EDGE('',*,*,#1626,.F.); +#1626 = EDGE_CURVE('',#1603,#548,#1627,.T.); +#1627 = LINE('',#1628,#1629); +#1628 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1629 = VECTOR('',#1630,1.); +#1630 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1631 = PLANE('',#1632); +#1632 = AXIS2_PLACEMENT_3D('',#1633,#1634,#1635); +#1633 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1634 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1635 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1636 = ADVANCED_FACE('',(#1637),#1656,.T.); +#1637 = FACE_BOUND('',#1638,.F.); +#1638 = EDGE_LOOP('',(#1639,#1648,#1649,#1650)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1640 = EDGE_CURVE('',#1603,#1641,#1643,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1643 = CIRCLE('',#1644,0.125); +#1644 = AXIS2_PLACEMENT_3D('',#1645,#1646,#1647); +#1645 = CARTESIAN_POINT('',(1.225,-2.775557561563E-016,0.E+000)); +#1646 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1647 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1648 = ORIENTED_EDGE('',*,*,#1626,.T.); +#1649 = ORIENTED_EDGE('',*,*,#547,.F.); +#1650 = ORIENTED_EDGE('',*,*,#1651,.F.); +#1651 = EDGE_CURVE('',#1641,#540,#1652,.T.); +#1652 = LINE('',#1653,#1654); +#1653 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1654 = VECTOR('',#1655,1.); +#1655 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1656 = CYLINDRICAL_SURFACE('',#1657,0.125); +#1657 = AXIS2_PLACEMENT_3D('',#1658,#1659,#1660); +#1658 = CARTESIAN_POINT('',(1.225,-2.775557561563E-016,0.E+000)); +#1659 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1660 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1661 = ADVANCED_FACE('',(#1662),#1696,.F.); +#1662 = FACE_BOUND('',#1663,.F.); +#1663 = EDGE_LOOP('',(#1664,#1674,#1680,#1681,#1682,#1690)); +#1664 = ORIENTED_EDGE('',*,*,#1665,.F.); +#1665 = EDGE_CURVE('',#1666,#1668,#1670,.T.); +#1666 = VERTEX_POINT('',#1667); +#1667 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1668 = VERTEX_POINT('',#1669); +#1669 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1670 = LINE('',#1671,#1672); +#1671 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1672 = VECTOR('',#1673,1.); +#1673 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1674 = ORIENTED_EDGE('',*,*,#1675,.T.); +#1675 = EDGE_CURVE('',#1666,#293,#1676,.T.); +#1676 = LINE('',#1677,#1678); +#1677 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1678 = VECTOR('',#1679,1.); +#1679 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1680 = ORIENTED_EDGE('',*,*,#292,.F.); +#1681 = ORIENTED_EDGE('',*,*,#820,.F.); +#1682 = ORIENTED_EDGE('',*,*,#1683,.T.); +#1683 = EDGE_CURVE('',#813,#1684,#1686,.T.); +#1684 = VERTEX_POINT('',#1685); +#1685 = CARTESIAN_POINT('',(-1.5,0.125,0.2)); +#1686 = LINE('',#1687,#1688); +#1687 = CARTESIAN_POINT('',(-1.225,0.125,0.2)); +#1688 = VECTOR('',#1689,1.); +#1689 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1690 = ORIENTED_EDGE('',*,*,#1691,.F.); +#1691 = EDGE_CURVE('',#1668,#1684,#1692,.T.); +#1692 = LINE('',#1693,#1694); +#1693 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1694 = VECTOR('',#1695,1.); +#1695 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1696 = PLANE('',#1697); +#1697 = AXIS2_PLACEMENT_3D('',#1698,#1699,#1700); +#1698 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1699 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1700 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1701 = ADVANCED_FACE('',(#1702),#1729,.F.); +#1702 = FACE_BOUND('',#1703,.F.); +#1703 = EDGE_LOOP('',(#1704,#1712,#1713,#1714,#1715,#1723)); +#1704 = ORIENTED_EDGE('',*,*,#1705,.F.); +#1705 = EDGE_CURVE('',#1641,#1706,#1708,.T.); +#1706 = VERTEX_POINT('',#1707); +#1707 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1708 = LINE('',#1709,#1710); +#1709 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1710 = VECTOR('',#1711,1.); +#1711 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1712 = ORIENTED_EDGE('',*,*,#1651,.T.); +#1713 = ORIENTED_EDGE('',*,*,#539,.F.); +#1714 = ORIENTED_EDGE('',*,*,#994,.T.); +#1715 = ORIENTED_EDGE('',*,*,#1716,.T.); +#1716 = EDGE_CURVE('',#995,#1717,#1719,.T.); +#1717 = VERTEX_POINT('',#1718); +#1718 = CARTESIAN_POINT('',(1.5,-0.125,0.2)); +#1719 = LINE('',#1720,#1721); +#1720 = CARTESIAN_POINT('',(1.225,-0.125,0.2)); +#1721 = VECTOR('',#1722,1.); +#1722 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1723 = ORIENTED_EDGE('',*,*,#1724,.F.); +#1724 = EDGE_CURVE('',#1706,#1717,#1725,.T.); +#1725 = LINE('',#1726,#1727); +#1726 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1727 = VECTOR('',#1728,1.); +#1728 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1729 = PLANE('',#1730); +#1730 = AXIS2_PLACEMENT_3D('',#1731,#1732,#1733); +#1731 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1732 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1733 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1734 = ADVANCED_FACE('',(#1735),#1754,.T.); +#1735 = FACE_BOUND('',#1736,.F.); +#1736 = EDGE_LOOP('',(#1737,#1746,#1752,#1753)); +#1737 = ORIENTED_EDGE('',*,*,#1738,.F.); +#1738 = EDGE_CURVE('',#1739,#1666,#1741,.T.); +#1739 = VERTEX_POINT('',#1740); +#1740 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1741 = CIRCLE('',#1742,0.125); +#1742 = AXIS2_PLACEMENT_3D('',#1743,#1744,#1745); +#1743 = CARTESIAN_POINT('',(-1.225,4.440892098501E-016,0.E+000)); +#1744 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1745 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1746 = ORIENTED_EDGE('',*,*,#1747,.T.); +#1747 = EDGE_CURVE('',#1739,#301,#1748,.T.); +#1748 = LINE('',#1749,#1750); +#1749 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1750 = VECTOR('',#1751,1.); +#1751 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1752 = ORIENTED_EDGE('',*,*,#300,.F.); +#1753 = ORIENTED_EDGE('',*,*,#1675,.F.); +#1754 = CYLINDRICAL_SURFACE('',#1755,0.125); +#1755 = AXIS2_PLACEMENT_3D('',#1756,#1757,#1758); +#1756 = CARTESIAN_POINT('',(-1.225,4.440892098501E-016,0.E+000)); +#1757 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1758 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1759 = ADVANCED_FACE('',(#1760),#1787,.F.); +#1760 = FACE_BOUND('',#1761,.F.); +#1761 = EDGE_LOOP('',(#1762,#1770,#1778,#1784,#1785,#1786)); +#1762 = ORIENTED_EDGE('',*,*,#1763,.F.); +#1763 = EDGE_CURVE('',#1764,#1739,#1766,.T.); +#1764 = VERTEX_POINT('',#1765); +#1765 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1766 = LINE('',#1767,#1768); +#1767 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1768 = VECTOR('',#1769,1.); +#1769 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1770 = ORIENTED_EDGE('',*,*,#1771,.T.); +#1771 = EDGE_CURVE('',#1764,#1772,#1774,.T.); +#1772 = VERTEX_POINT('',#1773); +#1773 = CARTESIAN_POINT('',(-1.5,-0.125,0.2)); +#1774 = LINE('',#1775,#1776); +#1775 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1776 = VECTOR('',#1777,1.); +#1777 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1778 = ORIENTED_EDGE('',*,*,#1779,.T.); +#1779 = EDGE_CURVE('',#1772,#805,#1780,.T.); +#1780 = LINE('',#1781,#1782); +#1781 = CARTESIAN_POINT('',(-1.5,-0.125,0.2)); +#1782 = VECTOR('',#1783,1.); +#1783 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1784 = ORIENTED_EDGE('',*,*,#804,.F.); +#1785 = ORIENTED_EDGE('',*,*,#309,.F.); +#1786 = ORIENTED_EDGE('',*,*,#1747,.F.); +#1787 = PLANE('',#1788); +#1788 = AXIS2_PLACEMENT_3D('',#1789,#1790,#1791); +#1789 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1790 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1791 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1792 = ADVANCED_FACE('',(#1793),#1827,.F.); +#1793 = FACE_BOUND('',#1794,.F.); +#1794 = EDGE_LOOP('',(#1795,#1805,#1813,#1819,#1820,#1821)); +#1795 = ORIENTED_EDGE('',*,*,#1796,.F.); +#1796 = EDGE_CURVE('',#1797,#1799,#1801,.T.); +#1797 = VERTEX_POINT('',#1798); +#1798 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1799 = VERTEX_POINT('',#1800); +#1800 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1801 = LINE('',#1802,#1803); +#1802 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1803 = VECTOR('',#1804,1.); +#1804 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1805 = ORIENTED_EDGE('',*,*,#1806,.T.); +#1806 = EDGE_CURVE('',#1797,#1807,#1809,.T.); +#1807 = VERTEX_POINT('',#1808); +#1808 = CARTESIAN_POINT('',(1.5,-0.375,0.2)); +#1809 = LINE('',#1810,#1811); +#1810 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1811 = VECTOR('',#1812,1.); +#1812 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1813 = ORIENTED_EDGE('',*,*,#1814,.T.); +#1814 = EDGE_CURVE('',#1807,#980,#1815,.T.); +#1815 = LINE('',#1816,#1817); +#1816 = CARTESIAN_POINT('',(1.5,-0.375,0.2)); +#1817 = VECTOR('',#1818,1.); +#1818 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1819 = ORIENTED_EDGE('',*,*,#987,.T.); +#1820 = ORIENTED_EDGE('',*,*,#523,.F.); +#1821 = ORIENTED_EDGE('',*,*,#1822,.F.); +#1822 = EDGE_CURVE('',#1799,#515,#1823,.T.); +#1823 = LINE('',#1824,#1825); +#1824 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1825 = VECTOR('',#1826,1.); +#1826 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1827 = PLANE('',#1828); +#1828 = AXIS2_PLACEMENT_3D('',#1829,#1830,#1831); +#1829 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1830 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1831 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1832 = ADVANCED_FACE('',(#1833),#1852,.T.); +#1833 = FACE_BOUND('',#1834,.F.); +#1834 = EDGE_LOOP('',(#1835,#1844,#1845,#1846)); +#1835 = ORIENTED_EDGE('',*,*,#1836,.F.); +#1836 = EDGE_CURVE('',#1799,#1837,#1839,.T.); +#1837 = VERTEX_POINT('',#1838); +#1838 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1839 = CIRCLE('',#1840,0.125); +#1840 = AXIS2_PLACEMENT_3D('',#1841,#1842,#1843); +#1841 = CARTESIAN_POINT('',(1.225,-0.5,0.E+000)); +#1842 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1843 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1844 = ORIENTED_EDGE('',*,*,#1822,.T.); +#1845 = ORIENTED_EDGE('',*,*,#514,.F.); +#1846 = ORIENTED_EDGE('',*,*,#1847,.F.); +#1847 = EDGE_CURVE('',#1837,#507,#1848,.T.); +#1848 = LINE('',#1849,#1850); +#1849 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1850 = VECTOR('',#1851,1.); +#1851 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1852 = CYLINDRICAL_SURFACE('',#1853,0.125); +#1853 = AXIS2_PLACEMENT_3D('',#1854,#1855,#1856); +#1854 = CARTESIAN_POINT('',(1.225,-0.5,0.E+000)); +#1855 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1856 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1857 = ADVANCED_FACE('',(#1858),#1892,.F.); +#1858 = FACE_BOUND('',#1859,.F.); +#1859 = EDGE_LOOP('',(#1860,#1870,#1876,#1877,#1878,#1886)); +#1860 = ORIENTED_EDGE('',*,*,#1861,.F.); +#1861 = EDGE_CURVE('',#1862,#1864,#1866,.T.); +#1862 = VERTEX_POINT('',#1863); +#1863 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1864 = VERTEX_POINT('',#1865); +#1865 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1866 = LINE('',#1867,#1868); +#1867 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1868 = VECTOR('',#1869,1.); +#1869 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1870 = ORIENTED_EDGE('',*,*,#1871,.T.); +#1871 = EDGE_CURVE('',#1862,#326,#1872,.T.); +#1872 = LINE('',#1873,#1874); +#1873 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1874 = VECTOR('',#1875,1.); +#1875 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1876 = ORIENTED_EDGE('',*,*,#325,.F.); +#1877 = ORIENTED_EDGE('',*,*,#797,.F.); +#1878 = ORIENTED_EDGE('',*,*,#1879,.T.); +#1879 = EDGE_CURVE('',#790,#1880,#1882,.T.); +#1880 = VERTEX_POINT('',#1881); +#1881 = CARTESIAN_POINT('',(-1.5,-0.375,0.2)); +#1882 = LINE('',#1883,#1884); +#1883 = CARTESIAN_POINT('',(-1.225,-0.375,0.2)); +#1884 = VECTOR('',#1885,1.); +#1885 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1886 = ORIENTED_EDGE('',*,*,#1887,.F.); +#1887 = EDGE_CURVE('',#1864,#1880,#1888,.T.); +#1888 = LINE('',#1889,#1890); +#1889 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1890 = VECTOR('',#1891,1.); +#1891 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1892 = PLANE('',#1893); +#1893 = AXIS2_PLACEMENT_3D('',#1894,#1895,#1896); +#1894 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1895 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1896 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1897 = ADVANCED_FACE('',(#1898),#1925,.F.); +#1898 = FACE_BOUND('',#1899,.F.); +#1899 = EDGE_LOOP('',(#1900,#1908,#1909,#1910,#1911,#1919)); +#1900 = ORIENTED_EDGE('',*,*,#1901,.F.); +#1901 = EDGE_CURVE('',#1837,#1902,#1904,.T.); +#1902 = VERTEX_POINT('',#1903); +#1903 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1904 = LINE('',#1905,#1906); +#1905 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1906 = VECTOR('',#1907,1.); +#1907 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1908 = ORIENTED_EDGE('',*,*,#1847,.T.); +#1909 = ORIENTED_EDGE('',*,*,#506,.F.); +#1910 = ORIENTED_EDGE('',*,*,#971,.T.); +#1911 = ORIENTED_EDGE('',*,*,#1912,.T.); +#1912 = EDGE_CURVE('',#972,#1913,#1915,.T.); +#1913 = VERTEX_POINT('',#1914); +#1914 = CARTESIAN_POINT('',(1.5,-0.625,0.2)); +#1915 = LINE('',#1916,#1917); +#1916 = CARTESIAN_POINT('',(1.225,-0.625,0.2)); +#1917 = VECTOR('',#1918,1.); +#1918 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1919 = ORIENTED_EDGE('',*,*,#1920,.F.); +#1920 = EDGE_CURVE('',#1902,#1913,#1921,.T.); +#1921 = LINE('',#1922,#1923); +#1922 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1923 = VECTOR('',#1924,1.); +#1924 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1925 = PLANE('',#1926); +#1926 = AXIS2_PLACEMENT_3D('',#1927,#1928,#1929); +#1927 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1928 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1929 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1930 = ADVANCED_FACE('',(#1931),#1950,.T.); +#1931 = FACE_BOUND('',#1932,.F.); +#1932 = EDGE_LOOP('',(#1933,#1942,#1948,#1949)); +#1933 = ORIENTED_EDGE('',*,*,#1934,.F.); +#1934 = EDGE_CURVE('',#1935,#1862,#1937,.T.); +#1935 = VERTEX_POINT('',#1936); +#1936 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1937 = CIRCLE('',#1938,0.125); +#1938 = AXIS2_PLACEMENT_3D('',#1939,#1940,#1941); +#1939 = CARTESIAN_POINT('',(-1.225,-0.5,0.E+000)); +#1940 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1941 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1942 = ORIENTED_EDGE('',*,*,#1943,.T.); +#1943 = EDGE_CURVE('',#1935,#334,#1944,.T.); +#1944 = LINE('',#1945,#1946); +#1945 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1946 = VECTOR('',#1947,1.); +#1947 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1948 = ORIENTED_EDGE('',*,*,#333,.F.); +#1949 = ORIENTED_EDGE('',*,*,#1871,.F.); +#1950 = CYLINDRICAL_SURFACE('',#1951,0.125); +#1951 = AXIS2_PLACEMENT_3D('',#1952,#1953,#1954); +#1952 = CARTESIAN_POINT('',(-1.225,-0.5,0.E+000)); +#1953 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1954 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1955 = ADVANCED_FACE('',(#1956),#1983,.F.); +#1956 = FACE_BOUND('',#1957,.F.); +#1957 = EDGE_LOOP('',(#1958,#1966,#1974,#1980,#1981,#1982)); +#1958 = ORIENTED_EDGE('',*,*,#1959,.F.); +#1959 = EDGE_CURVE('',#1960,#1935,#1962,.T.); +#1960 = VERTEX_POINT('',#1961); +#1961 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1962 = LINE('',#1963,#1964); +#1963 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1964 = VECTOR('',#1965,1.); +#1965 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1966 = ORIENTED_EDGE('',*,*,#1967,.T.); +#1967 = EDGE_CURVE('',#1960,#1968,#1970,.T.); +#1968 = VERTEX_POINT('',#1969); +#1969 = CARTESIAN_POINT('',(-1.5,-0.625,0.2)); +#1970 = LINE('',#1971,#1972); +#1971 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1972 = VECTOR('',#1973,1.); +#1973 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1974 = ORIENTED_EDGE('',*,*,#1975,.T.); +#1975 = EDGE_CURVE('',#1968,#782,#1976,.T.); +#1976 = LINE('',#1977,#1978); +#1977 = CARTESIAN_POINT('',(-1.5,-0.625,0.2)); +#1978 = VECTOR('',#1979,1.); +#1979 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1980 = ORIENTED_EDGE('',*,*,#781,.F.); +#1981 = ORIENTED_EDGE('',*,*,#342,.F.); +#1982 = ORIENTED_EDGE('',*,*,#1943,.F.); +#1983 = PLANE('',#1984); +#1984 = AXIS2_PLACEMENT_3D('',#1985,#1986,#1987); +#1985 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1986 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1987 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1988 = ADVANCED_FACE('',(#1989),#2023,.F.); +#1989 = FACE_BOUND('',#1990,.F.); +#1990 = EDGE_LOOP('',(#1991,#2001,#2009,#2015,#2016,#2017)); +#1991 = ORIENTED_EDGE('',*,*,#1992,.F.); +#1992 = EDGE_CURVE('',#1993,#1995,#1997,.T.); +#1993 = VERTEX_POINT('',#1994); +#1994 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#1995 = VERTEX_POINT('',#1996); +#1996 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#1997 = LINE('',#1998,#1999); +#1998 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#1999 = VECTOR('',#2000,1.); +#2000 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2001 = ORIENTED_EDGE('',*,*,#2002,.T.); +#2002 = EDGE_CURVE('',#1993,#2003,#2005,.T.); +#2003 = VERTEX_POINT('',#2004); +#2004 = CARTESIAN_POINT('',(1.5,-0.875,0.2)); +#2005 = LINE('',#2006,#2007); +#2006 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#2007 = VECTOR('',#2008,1.); +#2008 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2009 = ORIENTED_EDGE('',*,*,#2010,.T.); +#2010 = EDGE_CURVE('',#2003,#957,#2011,.T.); +#2011 = LINE('',#2012,#2013); +#2012 = CARTESIAN_POINT('',(1.5,-0.875,0.2)); +#2013 = VECTOR('',#2014,1.); +#2014 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2015 = ORIENTED_EDGE('',*,*,#964,.T.); +#2016 = ORIENTED_EDGE('',*,*,#490,.F.); +#2017 = ORIENTED_EDGE('',*,*,#2018,.F.); +#2018 = EDGE_CURVE('',#1995,#482,#2019,.T.); +#2019 = LINE('',#2020,#2021); +#2020 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#2021 = VECTOR('',#2022,1.); +#2022 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2023 = PLANE('',#2024); +#2024 = AXIS2_PLACEMENT_3D('',#2025,#2026,#2027); +#2025 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#2026 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2027 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2028 = ADVANCED_FACE('',(#2029),#2048,.T.); +#2029 = FACE_BOUND('',#2030,.F.); +#2030 = EDGE_LOOP('',(#2031,#2040,#2041,#2042)); +#2031 = ORIENTED_EDGE('',*,*,#2032,.F.); +#2032 = EDGE_CURVE('',#1995,#2033,#2035,.T.); +#2033 = VERTEX_POINT('',#2034); +#2034 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#2035 = CIRCLE('',#2036,0.125); +#2036 = AXIS2_PLACEMENT_3D('',#2037,#2038,#2039); +#2037 = CARTESIAN_POINT('',(1.225,-1.,0.E+000)); +#2038 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#2039 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2040 = ORIENTED_EDGE('',*,*,#2018,.T.); +#2041 = ORIENTED_EDGE('',*,*,#481,.F.); +#2042 = ORIENTED_EDGE('',*,*,#2043,.F.); +#2043 = EDGE_CURVE('',#2033,#474,#2044,.T.); +#2044 = LINE('',#2045,#2046); +#2045 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#2046 = VECTOR('',#2047,1.); +#2047 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2048 = CYLINDRICAL_SURFACE('',#2049,0.125); +#2049 = AXIS2_PLACEMENT_3D('',#2050,#2051,#2052); +#2050 = CARTESIAN_POINT('',(1.225,-1.,0.E+000)); +#2051 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2052 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2053 = ADVANCED_FACE('',(#2054),#2088,.F.); +#2054 = FACE_BOUND('',#2055,.F.); +#2055 = EDGE_LOOP('',(#2056,#2066,#2072,#2073,#2074,#2082)); +#2056 = ORIENTED_EDGE('',*,*,#2057,.F.); +#2057 = EDGE_CURVE('',#2058,#2060,#2062,.T.); +#2058 = VERTEX_POINT('',#2059); +#2059 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#2060 = VERTEX_POINT('',#2061); +#2061 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#2062 = LINE('',#2063,#2064); +#2063 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#2064 = VECTOR('',#2065,1.); +#2065 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2066 = ORIENTED_EDGE('',*,*,#2067,.T.); +#2067 = EDGE_CURVE('',#2058,#359,#2068,.T.); +#2068 = LINE('',#2069,#2070); +#2069 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#2070 = VECTOR('',#2071,1.); +#2071 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2072 = ORIENTED_EDGE('',*,*,#358,.F.); +#2073 = ORIENTED_EDGE('',*,*,#774,.F.); +#2074 = ORIENTED_EDGE('',*,*,#2075,.T.); +#2075 = EDGE_CURVE('',#767,#2076,#2078,.T.); +#2076 = VERTEX_POINT('',#2077); +#2077 = CARTESIAN_POINT('',(-1.5,-0.875,0.2)); +#2078 = LINE('',#2079,#2080); +#2079 = CARTESIAN_POINT('',(-1.225,-0.875,0.2)); +#2080 = VECTOR('',#2081,1.); +#2081 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2082 = ORIENTED_EDGE('',*,*,#2083,.F.); +#2083 = EDGE_CURVE('',#2060,#2076,#2084,.T.); +#2084 = LINE('',#2085,#2086); +#2085 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#2086 = VECTOR('',#2087,1.); +#2087 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2088 = PLANE('',#2089); +#2089 = AXIS2_PLACEMENT_3D('',#2090,#2091,#2092); +#2090 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#2091 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2092 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2093 = ADVANCED_FACE('',(#2094),#2121,.F.); +#2094 = FACE_BOUND('',#2095,.F.); +#2095 = EDGE_LOOP('',(#2096,#2104,#2105,#2106,#2107,#2115)); +#2096 = ORIENTED_EDGE('',*,*,#2097,.F.); +#2097 = EDGE_CURVE('',#2033,#2098,#2100,.T.); +#2098 = VERTEX_POINT('',#2099); +#2099 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#2100 = LINE('',#2101,#2102); +#2101 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#2102 = VECTOR('',#2103,1.); +#2103 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2104 = ORIENTED_EDGE('',*,*,#2043,.T.); +#2105 = ORIENTED_EDGE('',*,*,#473,.F.); +#2106 = ORIENTED_EDGE('',*,*,#948,.T.); +#2107 = ORIENTED_EDGE('',*,*,#2108,.T.); +#2108 = EDGE_CURVE('',#949,#2109,#2111,.T.); +#2109 = VERTEX_POINT('',#2110); +#2110 = CARTESIAN_POINT('',(1.5,-1.125,0.2)); +#2111 = LINE('',#2112,#2113); +#2112 = CARTESIAN_POINT('',(1.225,-1.125,0.2)); +#2113 = VECTOR('',#2114,1.); +#2114 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2115 = ORIENTED_EDGE('',*,*,#2116,.F.); +#2116 = EDGE_CURVE('',#2098,#2109,#2117,.T.); +#2117 = LINE('',#2118,#2119); +#2118 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#2119 = VECTOR('',#2120,1.); +#2120 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2121 = PLANE('',#2122); +#2122 = AXIS2_PLACEMENT_3D('',#2123,#2124,#2125); +#2123 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#2124 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2125 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2126 = ADVANCED_FACE('',(#2127),#2146,.T.); +#2127 = FACE_BOUND('',#2128,.F.); +#2128 = EDGE_LOOP('',(#2129,#2138,#2144,#2145)); +#2129 = ORIENTED_EDGE('',*,*,#2130,.F.); +#2130 = EDGE_CURVE('',#2131,#2058,#2133,.T.); +#2131 = VERTEX_POINT('',#2132); +#2132 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2133 = CIRCLE('',#2134,0.125); +#2134 = AXIS2_PLACEMENT_3D('',#2135,#2136,#2137); +#2135 = CARTESIAN_POINT('',(-1.225,-1.,0.E+000)); +#2136 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2137 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2138 = ORIENTED_EDGE('',*,*,#2139,.T.); +#2139 = EDGE_CURVE('',#2131,#367,#2140,.T.); +#2140 = LINE('',#2141,#2142); +#2141 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2142 = VECTOR('',#2143,1.); +#2143 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2144 = ORIENTED_EDGE('',*,*,#366,.F.); +#2145 = ORIENTED_EDGE('',*,*,#2067,.F.); +#2146 = CYLINDRICAL_SURFACE('',#2147,0.125); +#2147 = AXIS2_PLACEMENT_3D('',#2148,#2149,#2150); +#2148 = CARTESIAN_POINT('',(-1.225,-1.,0.E+000)); +#2149 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2150 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2151 = ADVANCED_FACE('',(#2152),#2179,.F.); +#2152 = FACE_BOUND('',#2153,.F.); +#2153 = EDGE_LOOP('',(#2154,#2162,#2170,#2176,#2177,#2178)); +#2154 = ORIENTED_EDGE('',*,*,#2155,.F.); +#2155 = EDGE_CURVE('',#2156,#2131,#2158,.T.); +#2156 = VERTEX_POINT('',#2157); +#2157 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2158 = LINE('',#2159,#2160); +#2159 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2160 = VECTOR('',#2161,1.); +#2161 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2162 = ORIENTED_EDGE('',*,*,#2163,.T.); +#2163 = EDGE_CURVE('',#2156,#2164,#2166,.T.); +#2164 = VERTEX_POINT('',#2165); +#2165 = CARTESIAN_POINT('',(-1.5,-1.125,0.2)); +#2166 = LINE('',#2167,#2168); +#2167 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2168 = VECTOR('',#2169,1.); +#2169 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2170 = ORIENTED_EDGE('',*,*,#2171,.T.); +#2171 = EDGE_CURVE('',#2164,#759,#2172,.T.); +#2172 = LINE('',#2173,#2174); +#2173 = CARTESIAN_POINT('',(-1.5,-1.125,0.2)); +#2174 = VECTOR('',#2175,1.); +#2175 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2176 = ORIENTED_EDGE('',*,*,#758,.F.); +#2177 = ORIENTED_EDGE('',*,*,#375,.F.); +#2178 = ORIENTED_EDGE('',*,*,#2139,.F.); +#2179 = PLANE('',#2180); +#2180 = AXIS2_PLACEMENT_3D('',#2181,#2182,#2183); +#2181 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2182 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2183 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2184 = ADVANCED_FACE('',(#2185),#2219,.F.); +#2185 = FACE_BOUND('',#2186,.F.); +#2186 = EDGE_LOOP('',(#2187,#2197,#2205,#2211,#2212,#2213)); +#2187 = ORIENTED_EDGE('',*,*,#2188,.F.); +#2188 = EDGE_CURVE('',#2189,#2191,#2193,.T.); +#2189 = VERTEX_POINT('',#2190); +#2190 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2191 = VERTEX_POINT('',#2192); +#2192 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2193 = LINE('',#2194,#2195); +#2194 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2195 = VECTOR('',#2196,1.); +#2196 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2197 = ORIENTED_EDGE('',*,*,#2198,.T.); +#2198 = EDGE_CURVE('',#2189,#2199,#2201,.T.); +#2199 = VERTEX_POINT('',#2200); +#2200 = CARTESIAN_POINT('',(1.5,-1.375,0.2)); +#2201 = LINE('',#2202,#2203); +#2202 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2203 = VECTOR('',#2204,1.); +#2204 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2205 = ORIENTED_EDGE('',*,*,#2206,.T.); +#2206 = EDGE_CURVE('',#2199,#934,#2207,.T.); +#2207 = LINE('',#2208,#2209); +#2208 = CARTESIAN_POINT('',(1.5,-1.375,0.2)); +#2209 = VECTOR('',#2210,1.); +#2210 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2211 = ORIENTED_EDGE('',*,*,#941,.T.); +#2212 = ORIENTED_EDGE('',*,*,#457,.F.); +#2213 = ORIENTED_EDGE('',*,*,#2214,.F.); +#2214 = EDGE_CURVE('',#2191,#449,#2215,.T.); +#2215 = LINE('',#2216,#2217); +#2216 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2217 = VECTOR('',#2218,1.); +#2218 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2219 = PLANE('',#2220); +#2220 = AXIS2_PLACEMENT_3D('',#2221,#2222,#2223); +#2221 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2222 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2223 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2224 = ADVANCED_FACE('',(#2225),#2244,.T.); +#2225 = FACE_BOUND('',#2226,.F.); +#2226 = EDGE_LOOP('',(#2227,#2236,#2237,#2238)); +#2227 = ORIENTED_EDGE('',*,*,#2228,.F.); +#2228 = EDGE_CURVE('',#2191,#2229,#2231,.T.); +#2229 = VERTEX_POINT('',#2230); +#2230 = CARTESIAN_POINT('',(1.225,-1.625,0.E+000)); +#2231 = CIRCLE('',#2232,0.125); +#2232 = AXIS2_PLACEMENT_3D('',#2233,#2234,#2235); +#2233 = CARTESIAN_POINT('',(1.225,-1.5,0.E+000)); +#2234 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#2235 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2236 = ORIENTED_EDGE('',*,*,#2214,.T.); +#2237 = ORIENTED_EDGE('',*,*,#448,.F.); +#2238 = ORIENTED_EDGE('',*,*,#2239,.F.); +#2239 = EDGE_CURVE('',#2229,#441,#2240,.T.); +#2240 = LINE('',#2241,#2242); +#2241 = CARTESIAN_POINT('',(1.225,-1.625,0.E+000)); +#2242 = VECTOR('',#2243,1.); +#2243 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2244 = CYLINDRICAL_SURFACE('',#2245,0.125); +#2245 = AXIS2_PLACEMENT_3D('',#2246,#2247,#2248); +#2246 = CARTESIAN_POINT('',(1.225,-1.5,0.E+000)); +#2247 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2248 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2249 = ADVANCED_FACE('',(#2250),#2284,.F.); +#2250 = FACE_BOUND('',#2251,.F.); +#2251 = EDGE_LOOP('',(#2252,#2262,#2268,#2269,#2270,#2278)); +#2252 = ORIENTED_EDGE('',*,*,#2253,.F.); +#2253 = EDGE_CURVE('',#2254,#2256,#2258,.T.); +#2254 = VERTEX_POINT('',#2255); +#2255 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2256 = VERTEX_POINT('',#2257); +#2257 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2258 = LINE('',#2259,#2260); +#2259 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2260 = VECTOR('',#2261,1.); +#2261 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2262 = ORIENTED_EDGE('',*,*,#2263,.T.); +#2263 = EDGE_CURVE('',#2254,#392,#2264,.T.); +#2264 = LINE('',#2265,#2266); +#2265 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2266 = VECTOR('',#2267,1.); +#2267 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2268 = ORIENTED_EDGE('',*,*,#391,.F.); +#2269 = ORIENTED_EDGE('',*,*,#751,.F.); +#2270 = ORIENTED_EDGE('',*,*,#2271,.T.); +#2271 = EDGE_CURVE('',#744,#2272,#2274,.T.); +#2272 = VERTEX_POINT('',#2273); +#2273 = CARTESIAN_POINT('',(-1.5,-1.375,0.2)); +#2274 = LINE('',#2275,#2276); +#2275 = CARTESIAN_POINT('',(-1.225,-1.375,0.2)); +#2276 = VECTOR('',#2277,1.); +#2277 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2278 = ORIENTED_EDGE('',*,*,#2279,.F.); +#2279 = EDGE_CURVE('',#2256,#2272,#2280,.T.); +#2280 = LINE('',#2281,#2282); +#2281 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2282 = VECTOR('',#2283,1.); +#2283 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2284 = PLANE('',#2285); +#2285 = AXIS2_PLACEMENT_3D('',#2286,#2287,#2288); +#2286 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2287 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2288 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2289 = ADVANCED_FACE('',(#2290),#2317,.F.); +#2290 = FACE_BOUND('',#2291,.F.); +#2291 = EDGE_LOOP('',(#2292,#2300,#2301,#2302,#2303,#2311)); +#2292 = ORIENTED_EDGE('',*,*,#2293,.F.); +#2293 = EDGE_CURVE('',#2229,#2294,#2296,.T.); +#2294 = VERTEX_POINT('',#2295); +#2295 = CARTESIAN_POINT('',(1.5,-1.625,0.E+000)); +#2296 = LINE('',#2297,#2298); +#2297 = CARTESIAN_POINT('',(1.225,-1.625,0.E+000)); +#2298 = VECTOR('',#2299,1.); +#2299 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2300 = ORIENTED_EDGE('',*,*,#2239,.T.); +#2301 = ORIENTED_EDGE('',*,*,#440,.F.); +#2302 = ORIENTED_EDGE('',*,*,#925,.T.); +#2303 = ORIENTED_EDGE('',*,*,#2304,.T.); +#2304 = EDGE_CURVE('',#926,#2305,#2307,.T.); +#2305 = VERTEX_POINT('',#2306); +#2306 = CARTESIAN_POINT('',(1.5,-1.625,0.2)); +#2307 = LINE('',#2308,#2309); +#2308 = CARTESIAN_POINT('',(1.225,-1.625,0.2)); +#2309 = VECTOR('',#2310,1.); +#2310 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2311 = ORIENTED_EDGE('',*,*,#2312,.F.); +#2312 = EDGE_CURVE('',#2294,#2305,#2313,.T.); +#2313 = LINE('',#2314,#2315); +#2314 = CARTESIAN_POINT('',(1.5,-1.625,0.E+000)); +#2315 = VECTOR('',#2316,1.); +#2316 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2317 = PLANE('',#2318); +#2318 = AXIS2_PLACEMENT_3D('',#2319,#2320,#2321); +#2319 = CARTESIAN_POINT('',(1.225,-1.625,0.E+000)); +#2320 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2321 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2322 = ADVANCED_FACE('',(#2323),#2342,.T.); +#2323 = FACE_BOUND('',#2324,.F.); +#2324 = EDGE_LOOP('',(#2325,#2334,#2340,#2341)); +#2325 = ORIENTED_EDGE('',*,*,#2326,.F.); +#2326 = EDGE_CURVE('',#2327,#2254,#2329,.T.); +#2327 = VERTEX_POINT('',#2328); +#2328 = CARTESIAN_POINT('',(-1.225,-1.625,0.E+000)); +#2329 = CIRCLE('',#2330,0.125); +#2330 = AXIS2_PLACEMENT_3D('',#2331,#2332,#2333); +#2331 = CARTESIAN_POINT('',(-1.225,-1.5,0.E+000)); +#2332 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2333 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2334 = ORIENTED_EDGE('',*,*,#2335,.T.); +#2335 = EDGE_CURVE('',#2327,#400,#2336,.T.); +#2336 = LINE('',#2337,#2338); +#2337 = CARTESIAN_POINT('',(-1.225,-1.625,0.E+000)); +#2338 = VECTOR('',#2339,1.); +#2339 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2340 = ORIENTED_EDGE('',*,*,#399,.F.); +#2341 = ORIENTED_EDGE('',*,*,#2263,.F.); +#2342 = CYLINDRICAL_SURFACE('',#2343,0.125); +#2343 = AXIS2_PLACEMENT_3D('',#2344,#2345,#2346); +#2344 = CARTESIAN_POINT('',(-1.225,-1.5,0.E+000)); +#2345 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2346 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2347 = ADVANCED_FACE('',(#2348),#2375,.F.); +#2348 = FACE_BOUND('',#2349,.F.); +#2349 = EDGE_LOOP('',(#2350,#2358,#2366,#2372,#2373,#2374)); +#2350 = ORIENTED_EDGE('',*,*,#2351,.F.); +#2351 = EDGE_CURVE('',#2352,#2327,#2354,.T.); +#2352 = VERTEX_POINT('',#2353); +#2353 = CARTESIAN_POINT('',(-1.5,-1.625,0.E+000)); +#2354 = LINE('',#2355,#2356); +#2355 = CARTESIAN_POINT('',(-1.5,-1.625,0.E+000)); +#2356 = VECTOR('',#2357,1.); +#2357 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2358 = ORIENTED_EDGE('',*,*,#2359,.T.); +#2359 = EDGE_CURVE('',#2352,#2360,#2362,.T.); +#2360 = VERTEX_POINT('',#2361); +#2361 = CARTESIAN_POINT('',(-1.5,-1.625,0.2)); +#2362 = LINE('',#2363,#2364); +#2363 = CARTESIAN_POINT('',(-1.5,-1.625,0.E+000)); +#2364 = VECTOR('',#2365,1.); +#2365 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2366 = ORIENTED_EDGE('',*,*,#2367,.T.); +#2367 = EDGE_CURVE('',#2360,#736,#2368,.T.); +#2368 = LINE('',#2369,#2370); +#2369 = CARTESIAN_POINT('',(-1.5,-1.625,0.2)); +#2370 = VECTOR('',#2371,1.); +#2371 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2372 = ORIENTED_EDGE('',*,*,#735,.F.); +#2373 = ORIENTED_EDGE('',*,*,#408,.F.); +#2374 = ORIENTED_EDGE('',*,*,#2335,.F.); +#2375 = PLANE('',#2376); +#2376 = AXIS2_PLACEMENT_3D('',#2377,#2378,#2379); +#2377 = CARTESIAN_POINT('',(-1.5,-1.625,0.E+000)); +#2378 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2379 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2380 = ADVANCED_FACE('',(#2381),#2392,.T.); +#2381 = FACE_BOUND('',#2382,.T.); +#2382 = EDGE_LOOP('',(#2383,#2384,#2385,#2386)); +#2383 = ORIENTED_EDGE('',*,*,#728,.F.); +#2384 = ORIENTED_EDGE('',*,*,#424,.T.); +#2385 = ORIENTED_EDGE('',*,*,#918,.T.); +#2386 = ORIENTED_EDGE('',*,*,#2387,.F.); +#2387 = EDGE_CURVE('',#721,#911,#2388,.T.); +#2388 = LINE('',#2389,#2390); +#2389 = CARTESIAN_POINT('',(-1.49,-1.99,0.77)); +#2390 = VECTOR('',#2391,1.); +#2391 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2392 = PLANE('',#2393); +#2393 = AXIS2_PLACEMENT_3D('',#2394,#2395,#2396); +#2394 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#2395 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2396 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2397 = ADVANCED_FACE('',(#2398),#2423,.F.); +#2398 = FACE_BOUND('',#2399,.F.); +#2399 = EDGE_LOOP('',(#2400,#2408,#2409,#2417)); +#2400 = ORIENTED_EDGE('',*,*,#2401,.T.); +#2401 = EDGE_CURVE('',#2402,#664,#2404,.T.); +#2402 = VERTEX_POINT('',#2403); +#2403 = CARTESIAN_POINT('',(-0.85,1.3,0.E+000)); +#2404 = LINE('',#2405,#2406); +#2405 = CARTESIAN_POINT('',(-0.85,1.3,0.E+000)); +#2406 = VECTOR('',#2407,1.); +#2407 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2408 = ORIENTED_EDGE('',*,*,#663,.T.); +#2409 = ORIENTED_EDGE('',*,*,#2410,.F.); +#2410 = EDGE_CURVE('',#2411,#666,#2413,.T.); +#2411 = VERTEX_POINT('',#2412); +#2412 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#2413 = LINE('',#2414,#2415); +#2414 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#2415 = VECTOR('',#2416,1.); +#2416 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2417 = ORIENTED_EDGE('',*,*,#2418,.F.); +#2418 = EDGE_CURVE('',#2402,#2411,#2419,.T.); +#2419 = LINE('',#2420,#2421); +#2420 = CARTESIAN_POINT('',(-0.85,1.3,0.E+000)); +#2421 = VECTOR('',#2422,1.); +#2422 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2423 = PLANE('',#2424); +#2424 = AXIS2_PLACEMENT_3D('',#2425,#2426,#2427); +#2425 = CARTESIAN_POINT('',(-0.85,1.3,0.E+000)); +#2426 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2427 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2428 = ADVANCED_FACE('',(#2429),#2447,.F.); +#2429 = FACE_BOUND('',#2430,.F.); +#2430 = EDGE_LOOP('',(#2431,#2432,#2433,#2441)); +#2431 = ORIENTED_EDGE('',*,*,#2410,.T.); +#2432 = ORIENTED_EDGE('',*,*,#697,.T.); +#2433 = ORIENTED_EDGE('',*,*,#2434,.F.); +#2434 = EDGE_CURVE('',#2435,#690,#2437,.T.); +#2435 = VERTEX_POINT('',#2436); +#2436 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#2437 = LINE('',#2438,#2439); +#2438 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#2439 = VECTOR('',#2440,1.); +#2440 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2441 = ORIENTED_EDGE('',*,*,#2442,.F.); +#2442 = EDGE_CURVE('',#2411,#2435,#2443,.T.); +#2443 = LINE('',#2444,#2445); +#2444 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#2445 = VECTOR('',#2446,1.); +#2446 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2447 = PLANE('',#2448); +#2448 = AXIS2_PLACEMENT_3D('',#2449,#2450,#2451); +#2449 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#2450 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#2451 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2452 = ADVANCED_FACE('',(#2453),#2471,.F.); +#2453 = FACE_BOUND('',#2454,.F.); +#2454 = EDGE_LOOP('',(#2455,#2456,#2457,#2465)); +#2455 = ORIENTED_EDGE('',*,*,#2434,.T.); +#2456 = ORIENTED_EDGE('',*,*,#689,.T.); +#2457 = ORIENTED_EDGE('',*,*,#2458,.F.); +#2458 = EDGE_CURVE('',#2459,#682,#2461,.T.); +#2459 = VERTEX_POINT('',#2460); +#2460 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#2461 = LINE('',#2462,#2463); +#2462 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#2463 = VECTOR('',#2464,1.); +#2464 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2465 = ORIENTED_EDGE('',*,*,#2466,.F.); +#2466 = EDGE_CURVE('',#2435,#2459,#2467,.T.); +#2467 = LINE('',#2468,#2469); +#2468 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#2469 = VECTOR('',#2470,1.); +#2470 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#2471 = PLANE('',#2472); +#2472 = AXIS2_PLACEMENT_3D('',#2473,#2474,#2475); +#2473 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#2474 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#2475 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#2476 = ADVANCED_FACE('',(#2477),#2495,.F.); +#2477 = FACE_BOUND('',#2478,.F.); +#2478 = EDGE_LOOP('',(#2479,#2480,#2481,#2489)); +#2479 = ORIENTED_EDGE('',*,*,#2458,.T.); +#2480 = ORIENTED_EDGE('',*,*,#681,.T.); +#2481 = ORIENTED_EDGE('',*,*,#2482,.F.); +#2482 = EDGE_CURVE('',#2483,#674,#2485,.T.); +#2483 = VERTEX_POINT('',#2484); +#2484 = CARTESIAN_POINT('',(-0.5,1.65,0.E+000)); +#2485 = LINE('',#2486,#2487); +#2486 = CARTESIAN_POINT('',(-0.5,1.65,0.E+000)); +#2487 = VECTOR('',#2488,1.); +#2488 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2489 = ORIENTED_EDGE('',*,*,#2490,.F.); +#2490 = EDGE_CURVE('',#2459,#2483,#2491,.T.); +#2491 = LINE('',#2492,#2493); +#2492 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#2493 = VECTOR('',#2494,1.); +#2494 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#2495 = PLANE('',#2496); +#2496 = AXIS2_PLACEMENT_3D('',#2497,#2498,#2499); +#2497 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#2498 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2499 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#2500 = ADVANCED_FACE('',(#2501),#2512,.F.); +#2501 = FACE_BOUND('',#2502,.F.); +#2502 = EDGE_LOOP('',(#2503,#2504,#2505,#2506)); +#2503 = ORIENTED_EDGE('',*,*,#2482,.T.); +#2504 = ORIENTED_EDGE('',*,*,#673,.T.); +#2505 = ORIENTED_EDGE('',*,*,#2401,.F.); +#2506 = ORIENTED_EDGE('',*,*,#2507,.F.); +#2507 = EDGE_CURVE('',#2483,#2402,#2508,.T.); +#2508 = LINE('',#2509,#2510); +#2509 = CARTESIAN_POINT('',(-0.5,1.65,0.E+000)); +#2510 = VECTOR('',#2511,1.); +#2511 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#2512 = PLANE('',#2513); +#2513 = AXIS2_PLACEMENT_3D('',#2514,#2515,#2516); +#2514 = CARTESIAN_POINT('',(-0.5,1.65,0.E+000)); +#2515 = DIRECTION('',(0.707106781187,-0.707106781187,0.E+000)); +#2516 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#2517 = ADVANCED_FACE('',(#2518,#2524),#2535,.T.); +#2518 = FACE_BOUND('',#2519,.T.); +#2519 = EDGE_LOOP('',(#2520,#2521,#2522,#2523)); +#2520 = ORIENTED_EDGE('',*,*,#1096,.F.); +#2521 = ORIENTED_EDGE('',*,*,#720,.T.); +#2522 = ORIENTED_EDGE('',*,*,#2387,.T.); +#2523 = ORIENTED_EDGE('',*,*,#910,.F.); +#2524 = FACE_BOUND('',#2525,.T.); +#2525 = EDGE_LOOP('',(#2526)); +#2526 = ORIENTED_EDGE('',*,*,#2527,.T.); +#2527 = EDGE_CURVE('',#2528,#2528,#2530,.T.); +#2528 = VERTEX_POINT('',#2529); +#2529 = CARTESIAN_POINT('',(-0.9,1.15,0.77)); +#2530 = CIRCLE('',#2531,0.25); +#2531 = AXIS2_PLACEMENT_3D('',#2532,#2533,#2534); +#2532 = CARTESIAN_POINT('',(-0.9,1.4,0.77)); +#2533 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#2534 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2535 = PLANE('',#2536); +#2536 = AXIS2_PLACEMENT_3D('',#2537,#2538,#2539); +#2537 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#2538 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2539 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2540 = ADVANCED_FACE('',(#2541),#2552,.F.); +#2541 = FACE_BOUND('',#2542,.F.); +#2542 = EDGE_LOOP('',(#2543,#2544,#2550,#2551)); +#2543 = ORIENTED_EDGE('',*,*,#1289,.F.); +#2544 = ORIENTED_EDGE('',*,*,#2545,.F.); +#2545 = EDGE_CURVE('',#1194,#1282,#2546,.T.); +#2546 = LINE('',#2547,#2548); +#2547 = CARTESIAN_POINT('',(-1.5,1.625,0.2)); +#2548 = VECTOR('',#2549,1.); +#2549 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2550 = ORIENTED_EDGE('',*,*,#1193,.F.); +#2551 = ORIENTED_EDGE('',*,*,#867,.F.); +#2552 = PLANE('',#2553); +#2553 = AXIS2_PLACEMENT_3D('',#2554,#2555,#2556); +#2554 = CARTESIAN_POINT('',(-1.5,1.375,0.2)); +#2555 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2556 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2557 = ADVANCED_FACE('',(#2558),#2569,.F.); +#2558 = FACE_BOUND('',#2559,.F.); +#2559 = EDGE_LOOP('',(#2560,#2561,#2567,#2568)); +#2560 = ORIENTED_EDGE('',*,*,#2367,.F.); +#2561 = ORIENTED_EDGE('',*,*,#2562,.F.); +#2562 = EDGE_CURVE('',#2272,#2360,#2563,.T.); +#2563 = LINE('',#2564,#2565); +#2564 = CARTESIAN_POINT('',(-1.5,-1.375,0.2)); +#2565 = VECTOR('',#2566,1.); +#2566 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2567 = ORIENTED_EDGE('',*,*,#2271,.F.); +#2568 = ORIENTED_EDGE('',*,*,#743,.F.); +#2569 = PLANE('',#2570); +#2570 = AXIS2_PLACEMENT_3D('',#2571,#2572,#2573); +#2571 = CARTESIAN_POINT('',(-1.5,-1.625,0.2)); +#2572 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2573 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2574 = ADVANCED_FACE('',(#2575),#2586,.F.); +#2575 = FACE_BOUND('',#2576,.F.); +#2576 = EDGE_LOOP('',(#2577,#2578,#2584,#2585)); +#2577 = ORIENTED_EDGE('',*,*,#2171,.F.); +#2578 = ORIENTED_EDGE('',*,*,#2579,.F.); +#2579 = EDGE_CURVE('',#2076,#2164,#2580,.T.); +#2580 = LINE('',#2581,#2582); +#2581 = CARTESIAN_POINT('',(-1.5,-0.875,0.2)); +#2582 = VECTOR('',#2583,1.); +#2583 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2584 = ORIENTED_EDGE('',*,*,#2075,.F.); +#2585 = ORIENTED_EDGE('',*,*,#766,.F.); +#2586 = PLANE('',#2587); +#2587 = AXIS2_PLACEMENT_3D('',#2588,#2589,#2590); +#2588 = CARTESIAN_POINT('',(-1.5,-1.125,0.2)); +#2589 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2590 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2591 = ADVANCED_FACE('',(#2592),#2603,.F.); +#2592 = FACE_BOUND('',#2593,.F.); +#2593 = EDGE_LOOP('',(#2594,#2595,#2601,#2602)); +#2594 = ORIENTED_EDGE('',*,*,#1583,.F.); +#2595 = ORIENTED_EDGE('',*,*,#2596,.F.); +#2596 = EDGE_CURVE('',#1488,#1576,#2597,.T.); +#2597 = LINE('',#2598,#2599); +#2598 = CARTESIAN_POINT('',(-1.5,0.625,0.2)); +#2599 = VECTOR('',#2600,1.); +#2600 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2601 = ORIENTED_EDGE('',*,*,#1487,.F.); +#2602 = ORIENTED_EDGE('',*,*,#835,.F.); +#2603 = PLANE('',#2604); +#2604 = AXIS2_PLACEMENT_3D('',#2605,#2606,#2607); +#2605 = CARTESIAN_POINT('',(-1.5,0.375,0.2)); +#2606 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2607 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2608 = ADVANCED_FACE('',(#2609),#2620,.F.); +#2609 = FACE_BOUND('',#2610,.F.); +#2610 = EDGE_LOOP('',(#2611,#2612,#2618,#2619)); +#2611 = ORIENTED_EDGE('',*,*,#1975,.F.); +#2612 = ORIENTED_EDGE('',*,*,#2613,.F.); +#2613 = EDGE_CURVE('',#1880,#1968,#2614,.T.); +#2614 = LINE('',#2615,#2616); +#2615 = CARTESIAN_POINT('',(-1.5,-0.375,0.2)); +#2616 = VECTOR('',#2617,1.); +#2617 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2618 = ORIENTED_EDGE('',*,*,#1879,.F.); +#2619 = ORIENTED_EDGE('',*,*,#789,.F.); +#2620 = PLANE('',#2621); +#2621 = AXIS2_PLACEMENT_3D('',#2622,#2623,#2624); +#2622 = CARTESIAN_POINT('',(-1.5,-0.625,0.2)); +#2623 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2624 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2625 = ADVANCED_FACE('',(#2626),#2637,.F.); +#2626 = FACE_BOUND('',#2627,.F.); +#2627 = EDGE_LOOP('',(#2628,#2629,#2635,#2636)); +#2628 = ORIENTED_EDGE('',*,*,#1779,.F.); +#2629 = ORIENTED_EDGE('',*,*,#2630,.F.); +#2630 = EDGE_CURVE('',#1684,#1772,#2631,.T.); +#2631 = LINE('',#2632,#2633); +#2632 = CARTESIAN_POINT('',(-1.5,0.125,0.2)); +#2633 = VECTOR('',#2634,1.); +#2634 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2635 = ORIENTED_EDGE('',*,*,#1683,.F.); +#2636 = ORIENTED_EDGE('',*,*,#812,.F.); +#2637 = PLANE('',#2638); +#2638 = AXIS2_PLACEMENT_3D('',#2639,#2640,#2641); +#2639 = CARTESIAN_POINT('',(-1.5,-0.125,0.2)); +#2640 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2641 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2642 = ADVANCED_FACE('',(#2643),#2654,.F.); +#2643 = FACE_BOUND('',#2644,.F.); +#2644 = EDGE_LOOP('',(#2645,#2646,#2652,#2653)); +#2645 = ORIENTED_EDGE('',*,*,#1128,.F.); +#2646 = ORIENTED_EDGE('',*,*,#2647,.F.); +#2647 = EDGE_CURVE('',#1227,#1121,#2648,.T.); +#2648 = LINE('',#2649,#2650); +#2649 = CARTESIAN_POINT('',(1.5,1.375,0.2)); +#2650 = VECTOR('',#2651,1.); +#2651 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2652 = ORIENTED_EDGE('',*,*,#1226,.F.); +#2653 = ORIENTED_EDGE('',*,*,#1071,.T.); +#2654 = PLANE('',#2655); +#2655 = AXIS2_PLACEMENT_3D('',#2656,#2657,#2658); +#2656 = CARTESIAN_POINT('',(1.5,1.625,0.2)); +#2657 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2658 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2659 = ADVANCED_FACE('',(#2660),#2671,.F.); +#2660 = FACE_BOUND('',#2661,.F.); +#2661 = EDGE_LOOP('',(#2662,#2663,#2669,#2670)); +#2662 = ORIENTED_EDGE('',*,*,#2206,.F.); +#2663 = ORIENTED_EDGE('',*,*,#2664,.F.); +#2664 = EDGE_CURVE('',#2305,#2199,#2665,.T.); +#2665 = LINE('',#2666,#2667); +#2666 = CARTESIAN_POINT('',(1.5,-1.625,0.2)); +#2667 = VECTOR('',#2668,1.); +#2668 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2669 = ORIENTED_EDGE('',*,*,#2304,.F.); +#2670 = ORIENTED_EDGE('',*,*,#933,.T.); +#2671 = PLANE('',#2672); +#2672 = AXIS2_PLACEMENT_3D('',#2673,#2674,#2675); +#2673 = CARTESIAN_POINT('',(1.5,-1.375,0.2)); +#2674 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2675 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2676 = ADVANCED_FACE('',(#2677),#2688,.F.); +#2677 = FACE_BOUND('',#2678,.F.); +#2678 = EDGE_LOOP('',(#2679,#2680,#2686,#2687)); +#2679 = ORIENTED_EDGE('',*,*,#1324,.F.); +#2680 = ORIENTED_EDGE('',*,*,#2681,.F.); +#2681 = EDGE_CURVE('',#1383,#1317,#2682,.T.); +#2682 = LINE('',#2683,#2684); +#2683 = CARTESIAN_POINT('',(1.5,0.875,0.2)); +#2684 = VECTOR('',#2685,1.); +#2685 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2686 = ORIENTED_EDGE('',*,*,#1382,.F.); +#2687 = ORIENTED_EDGE('',*,*,#1048,.T.); +#2688 = PLANE('',#2689); +#2689 = AXIS2_PLACEMENT_3D('',#2690,#2691,#2692); +#2690 = CARTESIAN_POINT('',(1.5,1.125,0.2)); +#2691 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2692 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2693 = ADVANCED_FACE('',(#2694),#2705,.F.); +#2694 = FACE_BOUND('',#2695,.F.); +#2695 = EDGE_LOOP('',(#2696,#2697,#2703,#2704)); +#2696 = ORIENTED_EDGE('',*,*,#2010,.F.); +#2697 = ORIENTED_EDGE('',*,*,#2698,.F.); +#2698 = EDGE_CURVE('',#2109,#2003,#2699,.T.); +#2699 = LINE('',#2700,#2701); +#2700 = CARTESIAN_POINT('',(1.5,-1.125,0.2)); +#2701 = VECTOR('',#2702,1.); +#2702 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2703 = ORIENTED_EDGE('',*,*,#2108,.F.); +#2704 = ORIENTED_EDGE('',*,*,#956,.T.); +#2705 = PLANE('',#2706); +#2706 = AXIS2_PLACEMENT_3D('',#2707,#2708,#2709); +#2707 = CARTESIAN_POINT('',(1.5,-0.875,0.2)); +#2708 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2709 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2710 = ADVANCED_FACE('',(#2711),#2722,.F.); +#2711 = FACE_BOUND('',#2712,.F.); +#2712 = EDGE_LOOP('',(#2713,#2714,#2720,#2721)); +#2713 = ORIENTED_EDGE('',*,*,#1422,.F.); +#2714 = ORIENTED_EDGE('',*,*,#2715,.F.); +#2715 = EDGE_CURVE('',#1521,#1415,#2716,.T.); +#2716 = LINE('',#2717,#2718); +#2717 = CARTESIAN_POINT('',(1.5,0.375,0.2)); +#2718 = VECTOR('',#2719,1.); +#2719 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2720 = ORIENTED_EDGE('',*,*,#1520,.F.); +#2721 = ORIENTED_EDGE('',*,*,#1025,.T.); +#2722 = PLANE('',#2723); +#2723 = AXIS2_PLACEMENT_3D('',#2724,#2725,#2726); +#2724 = CARTESIAN_POINT('',(1.5,0.625,0.2)); +#2725 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2726 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2727 = ADVANCED_FACE('',(#2728),#2739,.F.); +#2728 = FACE_BOUND('',#2729,.F.); +#2729 = EDGE_LOOP('',(#2730,#2731,#2737,#2738)); +#2730 = ORIENTED_EDGE('',*,*,#1814,.F.); +#2731 = ORIENTED_EDGE('',*,*,#2732,.F.); +#2732 = EDGE_CURVE('',#1913,#1807,#2733,.T.); +#2733 = LINE('',#2734,#2735); +#2734 = CARTESIAN_POINT('',(1.5,-0.625,0.2)); +#2735 = VECTOR('',#2736,1.); +#2736 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2737 = ORIENTED_EDGE('',*,*,#1912,.F.); +#2738 = ORIENTED_EDGE('',*,*,#979,.T.); +#2739 = PLANE('',#2740); +#2740 = AXIS2_PLACEMENT_3D('',#2741,#2742,#2743); +#2741 = CARTESIAN_POINT('',(1.5,-0.375,0.2)); +#2742 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2743 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2744 = ADVANCED_FACE('',(#2745),#2756,.F.); +#2745 = FACE_BOUND('',#2746,.F.); +#2746 = EDGE_LOOP('',(#2747,#2748,#2754,#2755)); +#2747 = ORIENTED_EDGE('',*,*,#1618,.F.); +#2748 = ORIENTED_EDGE('',*,*,#2749,.F.); +#2749 = EDGE_CURVE('',#1717,#1611,#2750,.T.); +#2750 = LINE('',#2751,#2752); +#2751 = CARTESIAN_POINT('',(1.5,-0.125,0.2)); +#2752 = VECTOR('',#2753,1.); +#2753 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2754 = ORIENTED_EDGE('',*,*,#1716,.F.); +#2755 = ORIENTED_EDGE('',*,*,#1002,.T.); +#2756 = PLANE('',#2757); +#2757 = AXIS2_PLACEMENT_3D('',#2758,#2759,#2760); +#2758 = CARTESIAN_POINT('',(1.5,0.125,0.2)); +#2759 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2760 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2761 = ADVANCED_FACE('',(#2762),#2773,.T.); +#2762 = FACE_BOUND('',#2763,.F.); +#2763 = EDGE_LOOP('',(#2764,#2765,#2766,#2767)); +#2764 = ORIENTED_EDGE('',*,*,#1110,.T.); +#2765 = ORIENTED_EDGE('',*,*,#1150,.T.); +#2766 = ORIENTED_EDGE('',*,*,#1215,.T.); +#2767 = ORIENTED_EDGE('',*,*,#2768,.T.); +#2768 = EDGE_CURVE('',#1216,#1111,#2769,.T.); +#2769 = LINE('',#2770,#2771); +#2770 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#2771 = VECTOR('',#2772,1.); +#2772 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2773 = PLANE('',#2774); +#2774 = AXIS2_PLACEMENT_3D('',#2775,#2776,#2777); +#2775 = CARTESIAN_POINT('',(1.5,1.625,0.E+000)); +#2776 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2777 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2778 = ADVANCED_FACE('',(#2779),#2785,.F.); +#2779 = FACE_BOUND('',#2780,.F.); +#2780 = EDGE_LOOP('',(#2781,#2782,#2783,#2784)); +#2781 = ORIENTED_EDGE('',*,*,#1234,.T.); +#2782 = ORIENTED_EDGE('',*,*,#2647,.T.); +#2783 = ORIENTED_EDGE('',*,*,#1120,.F.); +#2784 = ORIENTED_EDGE('',*,*,#2768,.F.); +#2785 = PLANE('',#2786); +#2786 = AXIS2_PLACEMENT_3D('',#2787,#2788,#2789); +#2787 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#2788 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2789 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2790 = ADVANCED_FACE('',(#2791),#2802,.T.); +#2791 = FACE_BOUND('',#2792,.F.); +#2792 = EDGE_LOOP('',(#2793,#2794,#2795,#2796)); +#2793 = ORIENTED_EDGE('',*,*,#1273,.T.); +#2794 = ORIENTED_EDGE('',*,*,#1248,.T.); +#2795 = ORIENTED_EDGE('',*,*,#1175,.T.); +#2796 = ORIENTED_EDGE('',*,*,#2797,.T.); +#2797 = EDGE_CURVE('',#1178,#1274,#2798,.T.); +#2798 = LINE('',#2799,#2800); +#2799 = CARTESIAN_POINT('',(-1.5,1.625,0.E+000)); +#2800 = VECTOR('',#2801,1.); +#2801 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2802 = PLANE('',#2803); +#2803 = AXIS2_PLACEMENT_3D('',#2804,#2805,#2806); +#2804 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#2805 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2806 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2807 = ADVANCED_FACE('',(#2808),#2814,.F.); +#2808 = FACE_BOUND('',#2809,.F.); +#2809 = EDGE_LOOP('',(#2810,#2811,#2812,#2813)); +#2810 = ORIENTED_EDGE('',*,*,#1201,.T.); +#2811 = ORIENTED_EDGE('',*,*,#2545,.T.); +#2812 = ORIENTED_EDGE('',*,*,#1281,.F.); +#2813 = ORIENTED_EDGE('',*,*,#2797,.F.); +#2814 = PLANE('',#2815); +#2815 = AXIS2_PLACEMENT_3D('',#2816,#2817,#2818); +#2816 = CARTESIAN_POINT('',(-1.5,1.625,0.E+000)); +#2817 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2818 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2819 = ADVANCED_FACE('',(#2820),#2831,.T.); +#2820 = FACE_BOUND('',#2821,.F.); +#2821 = EDGE_LOOP('',(#2822,#2823,#2824,#2825)); +#2822 = ORIENTED_EDGE('',*,*,#1306,.T.); +#2823 = ORIENTED_EDGE('',*,*,#1346,.T.); +#2824 = ORIENTED_EDGE('',*,*,#1371,.T.); +#2825 = ORIENTED_EDGE('',*,*,#2826,.T.); +#2826 = EDGE_CURVE('',#1372,#1307,#2827,.T.); +#2827 = LINE('',#2828,#2829); +#2828 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#2829 = VECTOR('',#2830,1.); +#2830 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2831 = PLANE('',#2832); +#2832 = AXIS2_PLACEMENT_3D('',#2833,#2834,#2835); +#2833 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#2834 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2835 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2836 = ADVANCED_FACE('',(#2837),#2843,.F.); +#2837 = FACE_BOUND('',#2838,.F.); +#2838 = EDGE_LOOP('',(#2839,#2840,#2841,#2842)); +#2839 = ORIENTED_EDGE('',*,*,#1390,.T.); +#2840 = ORIENTED_EDGE('',*,*,#2681,.T.); +#2841 = ORIENTED_EDGE('',*,*,#1316,.F.); +#2842 = ORIENTED_EDGE('',*,*,#2826,.F.); +#2843 = PLANE('',#2844); +#2844 = AXIS2_PLACEMENT_3D('',#2845,#2846,#2847); +#2845 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#2846 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2847 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2848 = ADVANCED_FACE('',(#2849),#2860,.T.); +#2849 = FACE_BOUND('',#2850,.F.); +#2850 = EDGE_LOOP('',(#2851,#2852,#2853,#2854)); +#2851 = ORIENTED_EDGE('',*,*,#1404,.T.); +#2852 = ORIENTED_EDGE('',*,*,#1444,.T.); +#2853 = ORIENTED_EDGE('',*,*,#1509,.T.); +#2854 = ORIENTED_EDGE('',*,*,#2855,.T.); +#2855 = EDGE_CURVE('',#1510,#1405,#2856,.T.); +#2856 = LINE('',#2857,#2858); +#2857 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#2858 = VECTOR('',#2859,1.); +#2859 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2860 = PLANE('',#2861); +#2861 = AXIS2_PLACEMENT_3D('',#2862,#2863,#2864); +#2862 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#2863 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2864 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2865 = ADVANCED_FACE('',(#2866),#2872,.F.); +#2866 = FACE_BOUND('',#2867,.F.); +#2867 = EDGE_LOOP('',(#2868,#2869,#2870,#2871)); +#2868 = ORIENTED_EDGE('',*,*,#1528,.T.); +#2869 = ORIENTED_EDGE('',*,*,#2715,.T.); +#2870 = ORIENTED_EDGE('',*,*,#1414,.F.); +#2871 = ORIENTED_EDGE('',*,*,#2855,.F.); +#2872 = PLANE('',#2873); +#2873 = AXIS2_PLACEMENT_3D('',#2874,#2875,#2876); +#2874 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#2875 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2876 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2877 = ADVANCED_FACE('',(#2878),#2889,.T.); +#2878 = FACE_BOUND('',#2879,.F.); +#2879 = EDGE_LOOP('',(#2880,#2881,#2882,#2883)); +#2880 = ORIENTED_EDGE('',*,*,#1567,.T.); +#2881 = ORIENTED_EDGE('',*,*,#1542,.T.); +#2882 = ORIENTED_EDGE('',*,*,#1469,.T.); +#2883 = ORIENTED_EDGE('',*,*,#2884,.T.); +#2884 = EDGE_CURVE('',#1472,#1568,#2885,.T.); +#2885 = LINE('',#2886,#2887); +#2886 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#2887 = VECTOR('',#2888,1.); +#2888 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2889 = PLANE('',#2890); +#2890 = AXIS2_PLACEMENT_3D('',#2891,#2892,#2893); +#2891 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#2892 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2893 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2894 = ADVANCED_FACE('',(#2895),#2901,.F.); +#2895 = FACE_BOUND('',#2896,.F.); +#2896 = EDGE_LOOP('',(#2897,#2898,#2899,#2900)); +#2897 = ORIENTED_EDGE('',*,*,#1495,.T.); +#2898 = ORIENTED_EDGE('',*,*,#2596,.T.); +#2899 = ORIENTED_EDGE('',*,*,#1575,.F.); +#2900 = ORIENTED_EDGE('',*,*,#2884,.F.); +#2901 = PLANE('',#2902); +#2902 = AXIS2_PLACEMENT_3D('',#2903,#2904,#2905); +#2903 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#2904 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2905 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2906 = ADVANCED_FACE('',(#2907),#2918,.T.); +#2907 = FACE_BOUND('',#2908,.F.); +#2908 = EDGE_LOOP('',(#2909,#2910,#2911,#2912)); +#2909 = ORIENTED_EDGE('',*,*,#1600,.T.); +#2910 = ORIENTED_EDGE('',*,*,#1640,.T.); +#2911 = ORIENTED_EDGE('',*,*,#1705,.T.); +#2912 = ORIENTED_EDGE('',*,*,#2913,.T.); +#2913 = EDGE_CURVE('',#1706,#1601,#2914,.T.); +#2914 = LINE('',#2915,#2916); +#2915 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#2916 = VECTOR('',#2917,1.); +#2917 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2918 = PLANE('',#2919); +#2919 = AXIS2_PLACEMENT_3D('',#2920,#2921,#2922); +#2920 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#2921 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2922 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2923 = ADVANCED_FACE('',(#2924),#2930,.F.); +#2924 = FACE_BOUND('',#2925,.F.); +#2925 = EDGE_LOOP('',(#2926,#2927,#2928,#2929)); +#2926 = ORIENTED_EDGE('',*,*,#1724,.T.); +#2927 = ORIENTED_EDGE('',*,*,#2749,.T.); +#2928 = ORIENTED_EDGE('',*,*,#1610,.F.); +#2929 = ORIENTED_EDGE('',*,*,#2913,.F.); +#2930 = PLANE('',#2931); +#2931 = AXIS2_PLACEMENT_3D('',#2932,#2933,#2934); +#2932 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#2933 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2934 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2935 = ADVANCED_FACE('',(#2936),#2947,.T.); +#2936 = FACE_BOUND('',#2937,.F.); +#2937 = EDGE_LOOP('',(#2938,#2939,#2940,#2941)); +#2938 = ORIENTED_EDGE('',*,*,#1763,.T.); +#2939 = ORIENTED_EDGE('',*,*,#1738,.T.); +#2940 = ORIENTED_EDGE('',*,*,#1665,.T.); +#2941 = ORIENTED_EDGE('',*,*,#2942,.T.); +#2942 = EDGE_CURVE('',#1668,#1764,#2943,.T.); +#2943 = LINE('',#2944,#2945); +#2944 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#2945 = VECTOR('',#2946,1.); +#2946 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2947 = PLANE('',#2948); +#2948 = AXIS2_PLACEMENT_3D('',#2949,#2950,#2951); +#2949 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#2950 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2951 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2952 = ADVANCED_FACE('',(#2953),#2959,.F.); +#2953 = FACE_BOUND('',#2954,.F.); +#2954 = EDGE_LOOP('',(#2955,#2956,#2957,#2958)); +#2955 = ORIENTED_EDGE('',*,*,#1691,.T.); +#2956 = ORIENTED_EDGE('',*,*,#2630,.T.); +#2957 = ORIENTED_EDGE('',*,*,#1771,.F.); +#2958 = ORIENTED_EDGE('',*,*,#2942,.F.); +#2959 = PLANE('',#2960); +#2960 = AXIS2_PLACEMENT_3D('',#2961,#2962,#2963); +#2961 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#2962 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2963 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2964 = ADVANCED_FACE('',(#2965),#2976,.T.); +#2965 = FACE_BOUND('',#2966,.F.); +#2966 = EDGE_LOOP('',(#2967,#2968,#2969,#2970)); +#2967 = ORIENTED_EDGE('',*,*,#1796,.T.); +#2968 = ORIENTED_EDGE('',*,*,#1836,.T.); +#2969 = ORIENTED_EDGE('',*,*,#1901,.T.); +#2970 = ORIENTED_EDGE('',*,*,#2971,.T.); +#2971 = EDGE_CURVE('',#1902,#1797,#2972,.T.); +#2972 = LINE('',#2973,#2974); +#2973 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#2974 = VECTOR('',#2975,1.); +#2975 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2976 = PLANE('',#2977); +#2977 = AXIS2_PLACEMENT_3D('',#2978,#2979,#2980); +#2978 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#2979 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2980 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2981 = ADVANCED_FACE('',(#2982),#2988,.F.); +#2982 = FACE_BOUND('',#2983,.F.); +#2983 = EDGE_LOOP('',(#2984,#2985,#2986,#2987)); +#2984 = ORIENTED_EDGE('',*,*,#1920,.T.); +#2985 = ORIENTED_EDGE('',*,*,#2732,.T.); +#2986 = ORIENTED_EDGE('',*,*,#1806,.F.); +#2987 = ORIENTED_EDGE('',*,*,#2971,.F.); +#2988 = PLANE('',#2989); +#2989 = AXIS2_PLACEMENT_3D('',#2990,#2991,#2992); +#2990 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#2991 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2992 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2993 = ADVANCED_FACE('',(#2994),#3005,.T.); +#2994 = FACE_BOUND('',#2995,.F.); +#2995 = EDGE_LOOP('',(#2996,#2997,#2998,#2999)); +#2996 = ORIENTED_EDGE('',*,*,#1959,.T.); +#2997 = ORIENTED_EDGE('',*,*,#1934,.T.); +#2998 = ORIENTED_EDGE('',*,*,#1861,.T.); +#2999 = ORIENTED_EDGE('',*,*,#3000,.T.); +#3000 = EDGE_CURVE('',#1864,#1960,#3001,.T.); +#3001 = LINE('',#3002,#3003); +#3002 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#3003 = VECTOR('',#3004,1.); +#3004 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3005 = PLANE('',#3006); +#3006 = AXIS2_PLACEMENT_3D('',#3007,#3008,#3009); +#3007 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#3008 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#3009 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#3010 = ADVANCED_FACE('',(#3011),#3017,.F.); +#3011 = FACE_BOUND('',#3012,.F.); +#3012 = EDGE_LOOP('',(#3013,#3014,#3015,#3016)); +#3013 = ORIENTED_EDGE('',*,*,#1887,.T.); +#3014 = ORIENTED_EDGE('',*,*,#2613,.T.); +#3015 = ORIENTED_EDGE('',*,*,#1967,.F.); +#3016 = ORIENTED_EDGE('',*,*,#3000,.F.); +#3017 = PLANE('',#3018); +#3018 = AXIS2_PLACEMENT_3D('',#3019,#3020,#3021); +#3019 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#3020 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3021 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3022 = ADVANCED_FACE('',(#3023),#3034,.T.); +#3023 = FACE_BOUND('',#3024,.F.); +#3024 = EDGE_LOOP('',(#3025,#3026,#3027,#3028)); +#3025 = ORIENTED_EDGE('',*,*,#1992,.T.); +#3026 = ORIENTED_EDGE('',*,*,#2032,.T.); +#3027 = ORIENTED_EDGE('',*,*,#2097,.T.); +#3028 = ORIENTED_EDGE('',*,*,#3029,.T.); +#3029 = EDGE_CURVE('',#2098,#1993,#3030,.T.); +#3030 = LINE('',#3031,#3032); +#3031 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#3032 = VECTOR('',#3033,1.); +#3033 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3034 = PLANE('',#3035); +#3035 = AXIS2_PLACEMENT_3D('',#3036,#3037,#3038); +#3036 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#3037 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#3038 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#3039 = ADVANCED_FACE('',(#3040),#3046,.F.); +#3040 = FACE_BOUND('',#3041,.F.); +#3041 = EDGE_LOOP('',(#3042,#3043,#3044,#3045)); +#3042 = ORIENTED_EDGE('',*,*,#2116,.T.); +#3043 = ORIENTED_EDGE('',*,*,#2698,.T.); +#3044 = ORIENTED_EDGE('',*,*,#2002,.F.); +#3045 = ORIENTED_EDGE('',*,*,#3029,.F.); +#3046 = PLANE('',#3047); +#3047 = AXIS2_PLACEMENT_3D('',#3048,#3049,#3050); +#3048 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#3049 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#3050 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3051 = ADVANCED_FACE('',(#3052),#3063,.T.); +#3052 = FACE_BOUND('',#3053,.F.); +#3053 = EDGE_LOOP('',(#3054,#3055,#3056,#3057)); +#3054 = ORIENTED_EDGE('',*,*,#2155,.T.); +#3055 = ORIENTED_EDGE('',*,*,#2130,.T.); +#3056 = ORIENTED_EDGE('',*,*,#2057,.T.); +#3057 = ORIENTED_EDGE('',*,*,#3058,.T.); +#3058 = EDGE_CURVE('',#2060,#2156,#3059,.T.); +#3059 = LINE('',#3060,#3061); +#3060 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#3061 = VECTOR('',#3062,1.); +#3062 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3063 = PLANE('',#3064); +#3064 = AXIS2_PLACEMENT_3D('',#3065,#3066,#3067); +#3065 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#3066 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#3067 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#3068 = ADVANCED_FACE('',(#3069),#3075,.F.); +#3069 = FACE_BOUND('',#3070,.F.); +#3070 = EDGE_LOOP('',(#3071,#3072,#3073,#3074)); +#3071 = ORIENTED_EDGE('',*,*,#2083,.T.); +#3072 = ORIENTED_EDGE('',*,*,#2579,.T.); +#3073 = ORIENTED_EDGE('',*,*,#2163,.F.); +#3074 = ORIENTED_EDGE('',*,*,#3058,.F.); +#3075 = PLANE('',#3076); +#3076 = AXIS2_PLACEMENT_3D('',#3077,#3078,#3079); +#3077 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#3078 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3079 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3080 = ADVANCED_FACE('',(#3081),#3092,.T.); +#3081 = FACE_BOUND('',#3082,.F.); +#3082 = EDGE_LOOP('',(#3083,#3084,#3085,#3086)); +#3083 = ORIENTED_EDGE('',*,*,#2188,.T.); +#3084 = ORIENTED_EDGE('',*,*,#2228,.T.); +#3085 = ORIENTED_EDGE('',*,*,#2293,.T.); +#3086 = ORIENTED_EDGE('',*,*,#3087,.T.); +#3087 = EDGE_CURVE('',#2294,#2189,#3088,.T.); +#3088 = LINE('',#3089,#3090); +#3089 = CARTESIAN_POINT('',(1.5,-1.625,0.E+000)); +#3090 = VECTOR('',#3091,1.); +#3091 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3092 = PLANE('',#3093); +#3093 = AXIS2_PLACEMENT_3D('',#3094,#3095,#3096); +#3094 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#3095 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#3096 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#3097 = ADVANCED_FACE('',(#3098),#3104,.F.); +#3098 = FACE_BOUND('',#3099,.F.); +#3099 = EDGE_LOOP('',(#3100,#3101,#3102,#3103)); +#3100 = ORIENTED_EDGE('',*,*,#2312,.T.); +#3101 = ORIENTED_EDGE('',*,*,#2664,.T.); +#3102 = ORIENTED_EDGE('',*,*,#2198,.F.); +#3103 = ORIENTED_EDGE('',*,*,#3087,.F.); +#3104 = PLANE('',#3105); +#3105 = AXIS2_PLACEMENT_3D('',#3106,#3107,#3108); +#3106 = CARTESIAN_POINT('',(1.5,-1.625,0.E+000)); +#3107 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#3108 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3109 = ADVANCED_FACE('',(#3110),#3121,.T.); +#3110 = FACE_BOUND('',#3111,.F.); +#3111 = EDGE_LOOP('',(#3112,#3113,#3114,#3115)); +#3112 = ORIENTED_EDGE('',*,*,#2351,.T.); +#3113 = ORIENTED_EDGE('',*,*,#2326,.T.); +#3114 = ORIENTED_EDGE('',*,*,#2253,.T.); +#3115 = ORIENTED_EDGE('',*,*,#3116,.T.); +#3116 = EDGE_CURVE('',#2256,#2352,#3117,.T.); +#3117 = LINE('',#3118,#3119); +#3118 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#3119 = VECTOR('',#3120,1.); +#3120 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3121 = PLANE('',#3122); +#3122 = AXIS2_PLACEMENT_3D('',#3123,#3124,#3125); +#3123 = CARTESIAN_POINT('',(-1.5,-1.625,0.E+000)); +#3124 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#3125 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#3126 = ADVANCED_FACE('',(#3127),#3133,.F.); +#3127 = FACE_BOUND('',#3128,.F.); +#3128 = EDGE_LOOP('',(#3129,#3130,#3131,#3132)); +#3129 = ORIENTED_EDGE('',*,*,#2279,.T.); +#3130 = ORIENTED_EDGE('',*,*,#2562,.T.); +#3131 = ORIENTED_EDGE('',*,*,#2359,.F.); +#3132 = ORIENTED_EDGE('',*,*,#3116,.F.); +#3133 = PLANE('',#3134); +#3134 = AXIS2_PLACEMENT_3D('',#3135,#3136,#3137); +#3135 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#3136 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#3137 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3138 = ADVANCED_FACE('',(#3139),#3146,.T.); +#3139 = FACE_BOUND('',#3140,.F.); +#3140 = EDGE_LOOP('',(#3141,#3142,#3143,#3144,#3145)); +#3141 = ORIENTED_EDGE('',*,*,#2418,.T.); +#3142 = ORIENTED_EDGE('',*,*,#2442,.T.); +#3143 = ORIENTED_EDGE('',*,*,#2466,.T.); +#3144 = ORIENTED_EDGE('',*,*,#2490,.T.); +#3145 = ORIENTED_EDGE('',*,*,#2507,.T.); +#3146 = PLANE('',#3147); +#3147 = AXIS2_PLACEMENT_3D('',#3148,#3149,#3150); +#3148 = CARTESIAN_POINT('',(-0.85,1.3,0.E+000)); +#3149 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#3150 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#3151 = ADVANCED_FACE('',(#3152),#3171,.F.); +#3152 = FACE_BOUND('',#3153,.T.); +#3153 = EDGE_LOOP('',(#3154,#3155,#3163,#3170)); +#3154 = ORIENTED_EDGE('',*,*,#2527,.F.); +#3155 = ORIENTED_EDGE('',*,*,#3156,.T.); +#3156 = EDGE_CURVE('',#2528,#3157,#3159,.T.); +#3157 = VERTEX_POINT('',#3158); +#3158 = CARTESIAN_POINT('',(-0.9,1.15,0.76)); +#3159 = LINE('',#3160,#3161); +#3160 = CARTESIAN_POINT('',(-0.9,1.15,0.78)); +#3161 = VECTOR('',#3162,1.); +#3162 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#3163 = ORIENTED_EDGE('',*,*,#3164,.F.); +#3164 = EDGE_CURVE('',#3157,#3157,#3165,.T.); +#3165 = CIRCLE('',#3166,0.25); +#3166 = AXIS2_PLACEMENT_3D('',#3167,#3168,#3169); +#3167 = CARTESIAN_POINT('',(-0.9,1.4,0.76)); +#3168 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3169 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3170 = ORIENTED_EDGE('',*,*,#3156,.F.); +#3171 = CYLINDRICAL_SURFACE('',#3172,0.25); +#3172 = AXIS2_PLACEMENT_3D('',#3173,#3174,#3175); +#3173 = CARTESIAN_POINT('',(-0.9,1.4,0.78)); +#3174 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#3175 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3176 = ADVANCED_FACE('',(#3177),#3180,.T.); +#3177 = FACE_BOUND('',#3178,.T.); +#3178 = EDGE_LOOP('',(#3179)); +#3179 = ORIENTED_EDGE('',*,*,#3164,.T.); +#3180 = PLANE('',#3181); +#3181 = AXIS2_PLACEMENT_3D('',#3182,#3183,#3184); +#3182 = CARTESIAN_POINT('',(-0.9,1.4,0.76)); +#3183 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3184 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3189)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3186,#3187,#3188)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#3186 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#3187 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#3188 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#3189 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#3186, +'distance_accuracy_value','confusion accuracy'); +#3190 = PRODUCT_TYPE('part',$,(#7)); +#3191 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( +#3192,#3200,#3207,#3214,#3221,#3228,#3236,#3243,#3250,#3257,#3264, +#3271,#3278,#3285,#3292,#3299,#3306,#3313,#3320,#3327,#3334,#3341, +#3348,#3355,#3362,#3369,#3376,#3383,#3390,#3397,#3404,#3411,#3418, +#3425,#3432,#3439,#3446,#3453,#3460,#3467,#3474,#3481,#3488,#3495, +#3502,#3509,#3516,#3523,#3530,#3537,#3544,#3551,#3558,#3565,#3572, +#3579,#3586,#3593,#3600,#3607,#3614,#3621,#3628,#3635,#3642,#3649, +#3656,#3663,#3670,#3677,#3684,#3691,#3698,#3705,#3712,#3719,#3726, +#3733,#3740,#3747,#3754,#3761,#3768,#3775,#3782,#3789,#3796,#3803, +#3810,#3817,#3824,#3831,#3838,#3845,#3852,#3859,#3866,#3874),#3185); +#3192 = STYLED_ITEM('color',(#3193),#17); +#3193 = PRESENTATION_STYLE_ASSIGNMENT((#3194)); +#3194 = SURFACE_STYLE_USAGE(.BOTH.,#3195); +#3195 = SURFACE_SIDE_STYLE('',(#3196)); +#3196 = SURFACE_STYLE_FILL_AREA(#3197); +#3197 = FILL_AREA_STYLE('',(#3198)); +#3198 = FILL_AREA_STYLE_COLOUR('',#3199); +#3199 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#3200 = STYLED_ITEM('color',(#3201),#58); +#3201 = PRESENTATION_STYLE_ASSIGNMENT((#3202)); +#3202 = SURFACE_STYLE_USAGE(.BOTH.,#3203); +#3203 = SURFACE_SIDE_STYLE('',(#3204)); +#3204 = SURFACE_STYLE_FILL_AREA(#3205); +#3205 = FILL_AREA_STYLE('',(#3206)); +#3206 = FILL_AREA_STYLE_COLOUR('',#3199); +#3207 = STYLED_ITEM('color',(#3208),#105); +#3208 = PRESENTATION_STYLE_ASSIGNMENT((#3209)); +#3209 = SURFACE_STYLE_USAGE(.BOTH.,#3210); +#3210 = SURFACE_SIDE_STYLE('',(#3211)); +#3211 = SURFACE_STYLE_FILL_AREA(#3212); +#3212 = FILL_AREA_STYLE('',(#3213)); +#3213 = FILL_AREA_STYLE_COLOUR('',#3199); +#3214 = STYLED_ITEM('color',(#3215),#130); +#3215 = PRESENTATION_STYLE_ASSIGNMENT((#3216)); +#3216 = SURFACE_STYLE_USAGE(.BOTH.,#3217); +#3217 = SURFACE_SIDE_STYLE('',(#3218)); +#3218 = SURFACE_STYLE_FILL_AREA(#3219); +#3219 = FILL_AREA_STYLE('',(#3220)); +#3220 = FILL_AREA_STYLE_COLOUR('',#3199); +#3221 = STYLED_ITEM('color',(#3222),#170); +#3222 = PRESENTATION_STYLE_ASSIGNMENT((#3223)); +#3223 = SURFACE_STYLE_USAGE(.BOTH.,#3224); +#3224 = SURFACE_SIDE_STYLE('',(#3225)); +#3225 = SURFACE_STYLE_FILL_AREA(#3226); +#3226 = FILL_AREA_STYLE('',(#3227)); +#3227 = FILL_AREA_STYLE_COLOUR('',#3199); +#3228 = STYLED_ITEM('color',(#3229),#187); +#3229 = PRESENTATION_STYLE_ASSIGNMENT((#3230)); +#3230 = SURFACE_STYLE_USAGE(.BOTH.,#3231); +#3231 = SURFACE_SIDE_STYLE('',(#3232)); +#3232 = SURFACE_STYLE_FILL_AREA(#3233); +#3233 = FILL_AREA_STYLE('',(#3234)); +#3234 = FILL_AREA_STYLE_COLOUR('',#3235); +#3235 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#3236 = STYLED_ITEM('color',(#3237),#707); +#3237 = PRESENTATION_STYLE_ASSIGNMENT((#3238)); +#3238 = SURFACE_STYLE_USAGE(.BOTH.,#3239); +#3239 = SURFACE_SIDE_STYLE('',(#3240)); +#3240 = SURFACE_STYLE_FILL_AREA(#3241); +#3241 = FILL_AREA_STYLE('',(#3242)); +#3242 = FILL_AREA_STYLE_COLOUR('',#3235); +#3243 = STYLED_ITEM('color',(#3244),#885); +#3244 = PRESENTATION_STYLE_ASSIGNMENT((#3245)); +#3245 = SURFACE_STYLE_USAGE(.BOTH.,#3246); +#3246 = SURFACE_SIDE_STYLE('',(#3247)); +#3247 = SURFACE_STYLE_FILL_AREA(#3248); +#3248 = FILL_AREA_STYLE('',(#3249)); +#3249 = FILL_AREA_STYLE_COLOUR('',#3199); +#3250 = STYLED_ITEM('color',(#3251),#897); +#3251 = PRESENTATION_STYLE_ASSIGNMENT((#3252)); +#3252 = SURFACE_STYLE_USAGE(.BOTH.,#3253); +#3253 = SURFACE_SIDE_STYLE('',(#3254)); +#3254 = SURFACE_STYLE_FILL_AREA(#3255); +#3255 = FILL_AREA_STYLE('',(#3256)); +#3256 = FILL_AREA_STYLE_COLOUR('',#3235); +#3257 = STYLED_ITEM('color',(#3258),#1089); +#3258 = PRESENTATION_STYLE_ASSIGNMENT((#3259)); +#3259 = SURFACE_STYLE_USAGE(.BOTH.,#3260); +#3260 = SURFACE_SIDE_STYLE('',(#3261)); +#3261 = SURFACE_STYLE_FILL_AREA(#3262); +#3262 = FILL_AREA_STYLE('',(#3263)); +#3263 = FILL_AREA_STYLE_COLOUR('',#3235); +#3264 = STYLED_ITEM('color',(#3265),#1106); +#3265 = PRESENTATION_STYLE_ASSIGNMENT((#3266)); +#3266 = SURFACE_STYLE_USAGE(.BOTH.,#3267); +#3267 = SURFACE_SIDE_STYLE('',(#3268)); +#3268 = SURFACE_STYLE_FILL_AREA(#3269); +#3269 = FILL_AREA_STYLE('',(#3270)); +#3270 = FILL_AREA_STYLE_COLOUR('',#3199); +#3271 = STYLED_ITEM('color',(#3272),#1146); +#3272 = PRESENTATION_STYLE_ASSIGNMENT((#3273)); +#3273 = SURFACE_STYLE_USAGE(.BOTH.,#3274); +#3274 = SURFACE_SIDE_STYLE('',(#3275)); +#3275 = SURFACE_STYLE_FILL_AREA(#3276); +#3276 = FILL_AREA_STYLE('',(#3277)); +#3277 = FILL_AREA_STYLE_COLOUR('',#3199); +#3278 = STYLED_ITEM('color',(#3279),#1171); +#3279 = PRESENTATION_STYLE_ASSIGNMENT((#3280)); +#3280 = SURFACE_STYLE_USAGE(.BOTH.,#3281); +#3281 = SURFACE_SIDE_STYLE('',(#3282)); +#3282 = SURFACE_STYLE_FILL_AREA(#3283); +#3283 = FILL_AREA_STYLE('',(#3284)); +#3284 = FILL_AREA_STYLE_COLOUR('',#3199); +#3285 = STYLED_ITEM('color',(#3286),#1211); +#3286 = PRESENTATION_STYLE_ASSIGNMENT((#3287)); +#3287 = SURFACE_STYLE_USAGE(.BOTH.,#3288); +#3288 = SURFACE_SIDE_STYLE('',(#3289)); +#3289 = SURFACE_STYLE_FILL_AREA(#3290); +#3290 = FILL_AREA_STYLE('',(#3291)); +#3291 = FILL_AREA_STYLE_COLOUR('',#3199); +#3292 = STYLED_ITEM('color',(#3293),#1244); +#3293 = PRESENTATION_STYLE_ASSIGNMENT((#3294)); +#3294 = SURFACE_STYLE_USAGE(.BOTH.,#3295); +#3295 = SURFACE_SIDE_STYLE('',(#3296)); +#3296 = SURFACE_STYLE_FILL_AREA(#3297); +#3297 = FILL_AREA_STYLE('',(#3298)); +#3298 = FILL_AREA_STYLE_COLOUR('',#3199); +#3299 = STYLED_ITEM('color',(#3300),#1269); +#3300 = PRESENTATION_STYLE_ASSIGNMENT((#3301)); +#3301 = SURFACE_STYLE_USAGE(.BOTH.,#3302); +#3302 = SURFACE_SIDE_STYLE('',(#3303)); +#3303 = SURFACE_STYLE_FILL_AREA(#3304); +#3304 = FILL_AREA_STYLE('',(#3305)); +#3305 = FILL_AREA_STYLE_COLOUR('',#3199); +#3306 = STYLED_ITEM('color',(#3307),#1302); +#3307 = PRESENTATION_STYLE_ASSIGNMENT((#3308)); +#3308 = SURFACE_STYLE_USAGE(.BOTH.,#3309); +#3309 = SURFACE_SIDE_STYLE('',(#3310)); +#3310 = SURFACE_STYLE_FILL_AREA(#3311); +#3311 = FILL_AREA_STYLE('',(#3312)); +#3312 = FILL_AREA_STYLE_COLOUR('',#3199); +#3313 = STYLED_ITEM('color',(#3314),#1342); +#3314 = PRESENTATION_STYLE_ASSIGNMENT((#3315)); +#3315 = SURFACE_STYLE_USAGE(.BOTH.,#3316); +#3316 = SURFACE_SIDE_STYLE('',(#3317)); +#3317 = SURFACE_STYLE_FILL_AREA(#3318); +#3318 = FILL_AREA_STYLE('',(#3319)); +#3319 = FILL_AREA_STYLE_COLOUR('',#3199); +#3320 = STYLED_ITEM('color',(#3321),#1367); +#3321 = PRESENTATION_STYLE_ASSIGNMENT((#3322)); +#3322 = SURFACE_STYLE_USAGE(.BOTH.,#3323); +#3323 = SURFACE_SIDE_STYLE('',(#3324)); +#3324 = SURFACE_STYLE_FILL_AREA(#3325); +#3325 = FILL_AREA_STYLE('',(#3326)); +#3326 = FILL_AREA_STYLE_COLOUR('',#3199); +#3327 = STYLED_ITEM('color',(#3328),#1400); +#3328 = PRESENTATION_STYLE_ASSIGNMENT((#3329)); +#3329 = SURFACE_STYLE_USAGE(.BOTH.,#3330); +#3330 = SURFACE_SIDE_STYLE('',(#3331)); +#3331 = SURFACE_STYLE_FILL_AREA(#3332); +#3332 = FILL_AREA_STYLE('',(#3333)); +#3333 = FILL_AREA_STYLE_COLOUR('',#3199); +#3334 = STYLED_ITEM('color',(#3335),#1440); +#3335 = PRESENTATION_STYLE_ASSIGNMENT((#3336)); +#3336 = SURFACE_STYLE_USAGE(.BOTH.,#3337); +#3337 = SURFACE_SIDE_STYLE('',(#3338)); +#3338 = SURFACE_STYLE_FILL_AREA(#3339); +#3339 = FILL_AREA_STYLE('',(#3340)); +#3340 = FILL_AREA_STYLE_COLOUR('',#3199); +#3341 = STYLED_ITEM('color',(#3342),#1465); +#3342 = PRESENTATION_STYLE_ASSIGNMENT((#3343)); +#3343 = SURFACE_STYLE_USAGE(.BOTH.,#3344); +#3344 = SURFACE_SIDE_STYLE('',(#3345)); +#3345 = SURFACE_STYLE_FILL_AREA(#3346); +#3346 = FILL_AREA_STYLE('',(#3347)); +#3347 = FILL_AREA_STYLE_COLOUR('',#3199); +#3348 = STYLED_ITEM('color',(#3349),#1505); +#3349 = PRESENTATION_STYLE_ASSIGNMENT((#3350)); +#3350 = SURFACE_STYLE_USAGE(.BOTH.,#3351); +#3351 = SURFACE_SIDE_STYLE('',(#3352)); +#3352 = SURFACE_STYLE_FILL_AREA(#3353); +#3353 = FILL_AREA_STYLE('',(#3354)); +#3354 = FILL_AREA_STYLE_COLOUR('',#3199); +#3355 = STYLED_ITEM('color',(#3356),#1538); +#3356 = PRESENTATION_STYLE_ASSIGNMENT((#3357)); +#3357 = SURFACE_STYLE_USAGE(.BOTH.,#3358); +#3358 = SURFACE_SIDE_STYLE('',(#3359)); +#3359 = SURFACE_STYLE_FILL_AREA(#3360); +#3360 = FILL_AREA_STYLE('',(#3361)); +#3361 = FILL_AREA_STYLE_COLOUR('',#3199); +#3362 = STYLED_ITEM('color',(#3363),#1563); +#3363 = PRESENTATION_STYLE_ASSIGNMENT((#3364)); +#3364 = SURFACE_STYLE_USAGE(.BOTH.,#3365); +#3365 = SURFACE_SIDE_STYLE('',(#3366)); +#3366 = SURFACE_STYLE_FILL_AREA(#3367); +#3367 = FILL_AREA_STYLE('',(#3368)); +#3368 = FILL_AREA_STYLE_COLOUR('',#3199); +#3369 = STYLED_ITEM('color',(#3370),#1596); +#3370 = PRESENTATION_STYLE_ASSIGNMENT((#3371)); +#3371 = SURFACE_STYLE_USAGE(.BOTH.,#3372); +#3372 = SURFACE_SIDE_STYLE('',(#3373)); +#3373 = SURFACE_STYLE_FILL_AREA(#3374); +#3374 = FILL_AREA_STYLE('',(#3375)); +#3375 = FILL_AREA_STYLE_COLOUR('',#3199); +#3376 = STYLED_ITEM('color',(#3377),#1636); +#3377 = PRESENTATION_STYLE_ASSIGNMENT((#3378)); +#3378 = SURFACE_STYLE_USAGE(.BOTH.,#3379); +#3379 = SURFACE_SIDE_STYLE('',(#3380)); +#3380 = SURFACE_STYLE_FILL_AREA(#3381); +#3381 = FILL_AREA_STYLE('',(#3382)); +#3382 = FILL_AREA_STYLE_COLOUR('',#3199); +#3383 = STYLED_ITEM('color',(#3384),#1661); +#3384 = PRESENTATION_STYLE_ASSIGNMENT((#3385)); +#3385 = SURFACE_STYLE_USAGE(.BOTH.,#3386); +#3386 = SURFACE_SIDE_STYLE('',(#3387)); +#3387 = SURFACE_STYLE_FILL_AREA(#3388); +#3388 = FILL_AREA_STYLE('',(#3389)); +#3389 = FILL_AREA_STYLE_COLOUR('',#3199); +#3390 = STYLED_ITEM('color',(#3391),#1701); +#3391 = PRESENTATION_STYLE_ASSIGNMENT((#3392)); +#3392 = SURFACE_STYLE_USAGE(.BOTH.,#3393); +#3393 = SURFACE_SIDE_STYLE('',(#3394)); +#3394 = SURFACE_STYLE_FILL_AREA(#3395); +#3395 = FILL_AREA_STYLE('',(#3396)); +#3396 = FILL_AREA_STYLE_COLOUR('',#3199); +#3397 = STYLED_ITEM('color',(#3398),#1734); +#3398 = PRESENTATION_STYLE_ASSIGNMENT((#3399)); +#3399 = SURFACE_STYLE_USAGE(.BOTH.,#3400); +#3400 = SURFACE_SIDE_STYLE('',(#3401)); +#3401 = SURFACE_STYLE_FILL_AREA(#3402); +#3402 = FILL_AREA_STYLE('',(#3403)); +#3403 = FILL_AREA_STYLE_COLOUR('',#3199); +#3404 = STYLED_ITEM('color',(#3405),#1759); +#3405 = PRESENTATION_STYLE_ASSIGNMENT((#3406)); +#3406 = SURFACE_STYLE_USAGE(.BOTH.,#3407); +#3407 = SURFACE_SIDE_STYLE('',(#3408)); +#3408 = SURFACE_STYLE_FILL_AREA(#3409); +#3409 = FILL_AREA_STYLE('',(#3410)); +#3410 = FILL_AREA_STYLE_COLOUR('',#3199); +#3411 = STYLED_ITEM('color',(#3412),#1792); +#3412 = PRESENTATION_STYLE_ASSIGNMENT((#3413)); +#3413 = SURFACE_STYLE_USAGE(.BOTH.,#3414); +#3414 = SURFACE_SIDE_STYLE('',(#3415)); +#3415 = SURFACE_STYLE_FILL_AREA(#3416); +#3416 = FILL_AREA_STYLE('',(#3417)); +#3417 = FILL_AREA_STYLE_COLOUR('',#3199); +#3418 = STYLED_ITEM('color',(#3419),#1832); +#3419 = PRESENTATION_STYLE_ASSIGNMENT((#3420)); +#3420 = SURFACE_STYLE_USAGE(.BOTH.,#3421); +#3421 = SURFACE_SIDE_STYLE('',(#3422)); +#3422 = SURFACE_STYLE_FILL_AREA(#3423); +#3423 = FILL_AREA_STYLE('',(#3424)); +#3424 = FILL_AREA_STYLE_COLOUR('',#3199); +#3425 = STYLED_ITEM('color',(#3426),#1857); +#3426 = PRESENTATION_STYLE_ASSIGNMENT((#3427)); +#3427 = SURFACE_STYLE_USAGE(.BOTH.,#3428); +#3428 = SURFACE_SIDE_STYLE('',(#3429)); +#3429 = SURFACE_STYLE_FILL_AREA(#3430); +#3430 = FILL_AREA_STYLE('',(#3431)); +#3431 = FILL_AREA_STYLE_COLOUR('',#3199); +#3432 = STYLED_ITEM('color',(#3433),#1897); +#3433 = PRESENTATION_STYLE_ASSIGNMENT((#3434)); +#3434 = SURFACE_STYLE_USAGE(.BOTH.,#3435); +#3435 = SURFACE_SIDE_STYLE('',(#3436)); +#3436 = SURFACE_STYLE_FILL_AREA(#3437); +#3437 = FILL_AREA_STYLE('',(#3438)); +#3438 = FILL_AREA_STYLE_COLOUR('',#3199); +#3439 = STYLED_ITEM('color',(#3440),#1930); +#3440 = PRESENTATION_STYLE_ASSIGNMENT((#3441)); +#3441 = SURFACE_STYLE_USAGE(.BOTH.,#3442); +#3442 = SURFACE_SIDE_STYLE('',(#3443)); +#3443 = SURFACE_STYLE_FILL_AREA(#3444); +#3444 = FILL_AREA_STYLE('',(#3445)); +#3445 = FILL_AREA_STYLE_COLOUR('',#3199); +#3446 = STYLED_ITEM('color',(#3447),#1955); +#3447 = PRESENTATION_STYLE_ASSIGNMENT((#3448)); +#3448 = SURFACE_STYLE_USAGE(.BOTH.,#3449); +#3449 = SURFACE_SIDE_STYLE('',(#3450)); +#3450 = SURFACE_STYLE_FILL_AREA(#3451); +#3451 = FILL_AREA_STYLE('',(#3452)); +#3452 = FILL_AREA_STYLE_COLOUR('',#3199); +#3453 = STYLED_ITEM('color',(#3454),#1988); +#3454 = PRESENTATION_STYLE_ASSIGNMENT((#3455)); +#3455 = SURFACE_STYLE_USAGE(.BOTH.,#3456); +#3456 = SURFACE_SIDE_STYLE('',(#3457)); +#3457 = SURFACE_STYLE_FILL_AREA(#3458); +#3458 = FILL_AREA_STYLE('',(#3459)); +#3459 = FILL_AREA_STYLE_COLOUR('',#3199); +#3460 = STYLED_ITEM('color',(#3461),#2028); +#3461 = PRESENTATION_STYLE_ASSIGNMENT((#3462)); +#3462 = SURFACE_STYLE_USAGE(.BOTH.,#3463); +#3463 = SURFACE_SIDE_STYLE('',(#3464)); +#3464 = SURFACE_STYLE_FILL_AREA(#3465); +#3465 = FILL_AREA_STYLE('',(#3466)); +#3466 = FILL_AREA_STYLE_COLOUR('',#3199); +#3467 = STYLED_ITEM('color',(#3468),#2053); +#3468 = PRESENTATION_STYLE_ASSIGNMENT((#3469)); +#3469 = SURFACE_STYLE_USAGE(.BOTH.,#3470); +#3470 = SURFACE_SIDE_STYLE('',(#3471)); +#3471 = SURFACE_STYLE_FILL_AREA(#3472); +#3472 = FILL_AREA_STYLE('',(#3473)); +#3473 = FILL_AREA_STYLE_COLOUR('',#3199); +#3474 = STYLED_ITEM('color',(#3475),#2093); +#3475 = PRESENTATION_STYLE_ASSIGNMENT((#3476)); +#3476 = SURFACE_STYLE_USAGE(.BOTH.,#3477); +#3477 = SURFACE_SIDE_STYLE('',(#3478)); +#3478 = SURFACE_STYLE_FILL_AREA(#3479); +#3479 = FILL_AREA_STYLE('',(#3480)); +#3480 = FILL_AREA_STYLE_COLOUR('',#3199); +#3481 = STYLED_ITEM('color',(#3482),#2126); +#3482 = PRESENTATION_STYLE_ASSIGNMENT((#3483)); +#3483 = SURFACE_STYLE_USAGE(.BOTH.,#3484); +#3484 = SURFACE_SIDE_STYLE('',(#3485)); +#3485 = SURFACE_STYLE_FILL_AREA(#3486); +#3486 = FILL_AREA_STYLE('',(#3487)); +#3487 = FILL_AREA_STYLE_COLOUR('',#3199); +#3488 = STYLED_ITEM('color',(#3489),#2151); +#3489 = PRESENTATION_STYLE_ASSIGNMENT((#3490)); +#3490 = SURFACE_STYLE_USAGE(.BOTH.,#3491); +#3491 = SURFACE_SIDE_STYLE('',(#3492)); +#3492 = SURFACE_STYLE_FILL_AREA(#3493); +#3493 = FILL_AREA_STYLE('',(#3494)); +#3494 = FILL_AREA_STYLE_COLOUR('',#3199); +#3495 = STYLED_ITEM('color',(#3496),#2184); +#3496 = PRESENTATION_STYLE_ASSIGNMENT((#3497)); +#3497 = SURFACE_STYLE_USAGE(.BOTH.,#3498); +#3498 = SURFACE_SIDE_STYLE('',(#3499)); +#3499 = SURFACE_STYLE_FILL_AREA(#3500); +#3500 = FILL_AREA_STYLE('',(#3501)); +#3501 = FILL_AREA_STYLE_COLOUR('',#3199); +#3502 = STYLED_ITEM('color',(#3503),#2224); +#3503 = PRESENTATION_STYLE_ASSIGNMENT((#3504)); +#3504 = SURFACE_STYLE_USAGE(.BOTH.,#3505); +#3505 = SURFACE_SIDE_STYLE('',(#3506)); +#3506 = SURFACE_STYLE_FILL_AREA(#3507); +#3507 = FILL_AREA_STYLE('',(#3508)); +#3508 = FILL_AREA_STYLE_COLOUR('',#3199); +#3509 = STYLED_ITEM('color',(#3510),#2249); +#3510 = PRESENTATION_STYLE_ASSIGNMENT((#3511)); +#3511 = SURFACE_STYLE_USAGE(.BOTH.,#3512); +#3512 = SURFACE_SIDE_STYLE('',(#3513)); +#3513 = SURFACE_STYLE_FILL_AREA(#3514); +#3514 = FILL_AREA_STYLE('',(#3515)); +#3515 = FILL_AREA_STYLE_COLOUR('',#3199); +#3516 = STYLED_ITEM('color',(#3517),#2289); +#3517 = PRESENTATION_STYLE_ASSIGNMENT((#3518)); +#3518 = SURFACE_STYLE_USAGE(.BOTH.,#3519); +#3519 = SURFACE_SIDE_STYLE('',(#3520)); +#3520 = SURFACE_STYLE_FILL_AREA(#3521); +#3521 = FILL_AREA_STYLE('',(#3522)); +#3522 = FILL_AREA_STYLE_COLOUR('',#3199); +#3523 = STYLED_ITEM('color',(#3524),#2322); +#3524 = PRESENTATION_STYLE_ASSIGNMENT((#3525)); +#3525 = SURFACE_STYLE_USAGE(.BOTH.,#3526); +#3526 = SURFACE_SIDE_STYLE('',(#3527)); +#3527 = SURFACE_STYLE_FILL_AREA(#3528); +#3528 = FILL_AREA_STYLE('',(#3529)); +#3529 = FILL_AREA_STYLE_COLOUR('',#3199); +#3530 = STYLED_ITEM('color',(#3531),#2347); +#3531 = PRESENTATION_STYLE_ASSIGNMENT((#3532)); +#3532 = SURFACE_STYLE_USAGE(.BOTH.,#3533); +#3533 = SURFACE_SIDE_STYLE('',(#3534)); +#3534 = SURFACE_STYLE_FILL_AREA(#3535); +#3535 = FILL_AREA_STYLE('',(#3536)); +#3536 = FILL_AREA_STYLE_COLOUR('',#3199); +#3537 = STYLED_ITEM('color',(#3538),#2380); +#3538 = PRESENTATION_STYLE_ASSIGNMENT((#3539)); +#3539 = SURFACE_STYLE_USAGE(.BOTH.,#3540); +#3540 = SURFACE_SIDE_STYLE('',(#3541)); +#3541 = SURFACE_STYLE_FILL_AREA(#3542); +#3542 = FILL_AREA_STYLE('',(#3543)); +#3543 = FILL_AREA_STYLE_COLOUR('',#3235); +#3544 = STYLED_ITEM('color',(#3545),#2397); +#3545 = PRESENTATION_STYLE_ASSIGNMENT((#3546)); +#3546 = SURFACE_STYLE_USAGE(.BOTH.,#3547); +#3547 = SURFACE_SIDE_STYLE('',(#3548)); +#3548 = SURFACE_STYLE_FILL_AREA(#3549); +#3549 = FILL_AREA_STYLE('',(#3550)); +#3550 = FILL_AREA_STYLE_COLOUR('',#3199); +#3551 = STYLED_ITEM('color',(#3552),#2428); +#3552 = PRESENTATION_STYLE_ASSIGNMENT((#3553)); +#3553 = SURFACE_STYLE_USAGE(.BOTH.,#3554); +#3554 = SURFACE_SIDE_STYLE('',(#3555)); +#3555 = SURFACE_STYLE_FILL_AREA(#3556); +#3556 = FILL_AREA_STYLE('',(#3557)); +#3557 = FILL_AREA_STYLE_COLOUR('',#3199); +#3558 = STYLED_ITEM('color',(#3559),#2452); +#3559 = PRESENTATION_STYLE_ASSIGNMENT((#3560)); +#3560 = SURFACE_STYLE_USAGE(.BOTH.,#3561); +#3561 = SURFACE_SIDE_STYLE('',(#3562)); +#3562 = SURFACE_STYLE_FILL_AREA(#3563); +#3563 = FILL_AREA_STYLE('',(#3564)); +#3564 = FILL_AREA_STYLE_COLOUR('',#3199); +#3565 = STYLED_ITEM('color',(#3566),#2476); +#3566 = PRESENTATION_STYLE_ASSIGNMENT((#3567)); +#3567 = SURFACE_STYLE_USAGE(.BOTH.,#3568); +#3568 = SURFACE_SIDE_STYLE('',(#3569)); +#3569 = SURFACE_STYLE_FILL_AREA(#3570); +#3570 = FILL_AREA_STYLE('',(#3571)); +#3571 = FILL_AREA_STYLE_COLOUR('',#3199); +#3572 = STYLED_ITEM('color',(#3573),#2500); +#3573 = PRESENTATION_STYLE_ASSIGNMENT((#3574)); +#3574 = SURFACE_STYLE_USAGE(.BOTH.,#3575); +#3575 = SURFACE_SIDE_STYLE('',(#3576)); +#3576 = SURFACE_STYLE_FILL_AREA(#3577); +#3577 = FILL_AREA_STYLE('',(#3578)); +#3578 = FILL_AREA_STYLE_COLOUR('',#3199); +#3579 = STYLED_ITEM('color',(#3580),#2517); +#3580 = PRESENTATION_STYLE_ASSIGNMENT((#3581)); +#3581 = SURFACE_STYLE_USAGE(.BOTH.,#3582); +#3582 = SURFACE_SIDE_STYLE('',(#3583)); +#3583 = SURFACE_STYLE_FILL_AREA(#3584); +#3584 = FILL_AREA_STYLE('',(#3585)); +#3585 = FILL_AREA_STYLE_COLOUR('',#3235); +#3586 = STYLED_ITEM('color',(#3587),#2540); +#3587 = PRESENTATION_STYLE_ASSIGNMENT((#3588)); +#3588 = SURFACE_STYLE_USAGE(.BOTH.,#3589); +#3589 = SURFACE_SIDE_STYLE('',(#3590)); +#3590 = SURFACE_STYLE_FILL_AREA(#3591); +#3591 = FILL_AREA_STYLE('',(#3592)); +#3592 = FILL_AREA_STYLE_COLOUR('',#3199); +#3593 = STYLED_ITEM('color',(#3594),#2557); +#3594 = PRESENTATION_STYLE_ASSIGNMENT((#3595)); +#3595 = SURFACE_STYLE_USAGE(.BOTH.,#3596); +#3596 = SURFACE_SIDE_STYLE('',(#3597)); +#3597 = SURFACE_STYLE_FILL_AREA(#3598); +#3598 = FILL_AREA_STYLE('',(#3599)); +#3599 = FILL_AREA_STYLE_COLOUR('',#3199); +#3600 = STYLED_ITEM('color',(#3601),#2574); +#3601 = PRESENTATION_STYLE_ASSIGNMENT((#3602)); +#3602 = SURFACE_STYLE_USAGE(.BOTH.,#3603); +#3603 = SURFACE_SIDE_STYLE('',(#3604)); +#3604 = SURFACE_STYLE_FILL_AREA(#3605); +#3605 = FILL_AREA_STYLE('',(#3606)); +#3606 = FILL_AREA_STYLE_COLOUR('',#3199); +#3607 = STYLED_ITEM('color',(#3608),#2591); +#3608 = PRESENTATION_STYLE_ASSIGNMENT((#3609)); +#3609 = SURFACE_STYLE_USAGE(.BOTH.,#3610); +#3610 = SURFACE_SIDE_STYLE('',(#3611)); +#3611 = SURFACE_STYLE_FILL_AREA(#3612); +#3612 = FILL_AREA_STYLE('',(#3613)); +#3613 = FILL_AREA_STYLE_COLOUR('',#3199); +#3614 = STYLED_ITEM('color',(#3615),#2608); +#3615 = PRESENTATION_STYLE_ASSIGNMENT((#3616)); +#3616 = SURFACE_STYLE_USAGE(.BOTH.,#3617); +#3617 = SURFACE_SIDE_STYLE('',(#3618)); +#3618 = SURFACE_STYLE_FILL_AREA(#3619); +#3619 = FILL_AREA_STYLE('',(#3620)); +#3620 = FILL_AREA_STYLE_COLOUR('',#3199); +#3621 = STYLED_ITEM('color',(#3622),#2625); +#3622 = PRESENTATION_STYLE_ASSIGNMENT((#3623)); +#3623 = SURFACE_STYLE_USAGE(.BOTH.,#3624); +#3624 = SURFACE_SIDE_STYLE('',(#3625)); +#3625 = SURFACE_STYLE_FILL_AREA(#3626); +#3626 = FILL_AREA_STYLE('',(#3627)); +#3627 = FILL_AREA_STYLE_COLOUR('',#3199); +#3628 = STYLED_ITEM('color',(#3629),#2642); +#3629 = PRESENTATION_STYLE_ASSIGNMENT((#3630)); +#3630 = SURFACE_STYLE_USAGE(.BOTH.,#3631); +#3631 = SURFACE_SIDE_STYLE('',(#3632)); +#3632 = SURFACE_STYLE_FILL_AREA(#3633); +#3633 = FILL_AREA_STYLE('',(#3634)); +#3634 = FILL_AREA_STYLE_COLOUR('',#3199); +#3635 = STYLED_ITEM('color',(#3636),#2659); +#3636 = PRESENTATION_STYLE_ASSIGNMENT((#3637)); +#3637 = SURFACE_STYLE_USAGE(.BOTH.,#3638); +#3638 = SURFACE_SIDE_STYLE('',(#3639)); +#3639 = SURFACE_STYLE_FILL_AREA(#3640); +#3640 = FILL_AREA_STYLE('',(#3641)); +#3641 = FILL_AREA_STYLE_COLOUR('',#3199); +#3642 = STYLED_ITEM('color',(#3643),#2676); +#3643 = PRESENTATION_STYLE_ASSIGNMENT((#3644)); +#3644 = SURFACE_STYLE_USAGE(.BOTH.,#3645); +#3645 = SURFACE_SIDE_STYLE('',(#3646)); +#3646 = SURFACE_STYLE_FILL_AREA(#3647); +#3647 = FILL_AREA_STYLE('',(#3648)); +#3648 = FILL_AREA_STYLE_COLOUR('',#3199); +#3649 = STYLED_ITEM('color',(#3650),#2693); +#3650 = PRESENTATION_STYLE_ASSIGNMENT((#3651)); +#3651 = SURFACE_STYLE_USAGE(.BOTH.,#3652); +#3652 = SURFACE_SIDE_STYLE('',(#3653)); +#3653 = SURFACE_STYLE_FILL_AREA(#3654); +#3654 = FILL_AREA_STYLE('',(#3655)); +#3655 = FILL_AREA_STYLE_COLOUR('',#3199); +#3656 = STYLED_ITEM('color',(#3657),#2710); +#3657 = PRESENTATION_STYLE_ASSIGNMENT((#3658)); +#3658 = SURFACE_STYLE_USAGE(.BOTH.,#3659); +#3659 = SURFACE_SIDE_STYLE('',(#3660)); +#3660 = SURFACE_STYLE_FILL_AREA(#3661); +#3661 = FILL_AREA_STYLE('',(#3662)); +#3662 = FILL_AREA_STYLE_COLOUR('',#3199); +#3663 = STYLED_ITEM('color',(#3664),#2727); +#3664 = PRESENTATION_STYLE_ASSIGNMENT((#3665)); +#3665 = SURFACE_STYLE_USAGE(.BOTH.,#3666); +#3666 = SURFACE_SIDE_STYLE('',(#3667)); +#3667 = SURFACE_STYLE_FILL_AREA(#3668); +#3668 = FILL_AREA_STYLE('',(#3669)); +#3669 = FILL_AREA_STYLE_COLOUR('',#3199); +#3670 = STYLED_ITEM('color',(#3671),#2744); +#3671 = PRESENTATION_STYLE_ASSIGNMENT((#3672)); +#3672 = SURFACE_STYLE_USAGE(.BOTH.,#3673); +#3673 = SURFACE_SIDE_STYLE('',(#3674)); +#3674 = SURFACE_STYLE_FILL_AREA(#3675); +#3675 = FILL_AREA_STYLE('',(#3676)); +#3676 = FILL_AREA_STYLE_COLOUR('',#3199); +#3677 = STYLED_ITEM('color',(#3678),#2761); +#3678 = PRESENTATION_STYLE_ASSIGNMENT((#3679)); +#3679 = SURFACE_STYLE_USAGE(.BOTH.,#3680); +#3680 = SURFACE_SIDE_STYLE('',(#3681)); +#3681 = SURFACE_STYLE_FILL_AREA(#3682); +#3682 = FILL_AREA_STYLE('',(#3683)); +#3683 = FILL_AREA_STYLE_COLOUR('',#3199); +#3684 = STYLED_ITEM('color',(#3685),#2778); +#3685 = PRESENTATION_STYLE_ASSIGNMENT((#3686)); +#3686 = SURFACE_STYLE_USAGE(.BOTH.,#3687); +#3687 = SURFACE_SIDE_STYLE('',(#3688)); +#3688 = SURFACE_STYLE_FILL_AREA(#3689); +#3689 = FILL_AREA_STYLE('',(#3690)); +#3690 = FILL_AREA_STYLE_COLOUR('',#3199); +#3691 = STYLED_ITEM('color',(#3692),#2790); +#3692 = PRESENTATION_STYLE_ASSIGNMENT((#3693)); +#3693 = SURFACE_STYLE_USAGE(.BOTH.,#3694); +#3694 = SURFACE_SIDE_STYLE('',(#3695)); +#3695 = SURFACE_STYLE_FILL_AREA(#3696); +#3696 = FILL_AREA_STYLE('',(#3697)); +#3697 = FILL_AREA_STYLE_COLOUR('',#3199); +#3698 = STYLED_ITEM('color',(#3699),#2807); +#3699 = PRESENTATION_STYLE_ASSIGNMENT((#3700)); +#3700 = SURFACE_STYLE_USAGE(.BOTH.,#3701); +#3701 = SURFACE_SIDE_STYLE('',(#3702)); +#3702 = SURFACE_STYLE_FILL_AREA(#3703); +#3703 = FILL_AREA_STYLE('',(#3704)); +#3704 = FILL_AREA_STYLE_COLOUR('',#3199); +#3705 = STYLED_ITEM('color',(#3706),#2819); +#3706 = PRESENTATION_STYLE_ASSIGNMENT((#3707)); +#3707 = SURFACE_STYLE_USAGE(.BOTH.,#3708); +#3708 = SURFACE_SIDE_STYLE('',(#3709)); +#3709 = SURFACE_STYLE_FILL_AREA(#3710); +#3710 = FILL_AREA_STYLE('',(#3711)); +#3711 = FILL_AREA_STYLE_COLOUR('',#3199); +#3712 = STYLED_ITEM('color',(#3713),#2836); +#3713 = PRESENTATION_STYLE_ASSIGNMENT((#3714)); +#3714 = SURFACE_STYLE_USAGE(.BOTH.,#3715); +#3715 = SURFACE_SIDE_STYLE('',(#3716)); +#3716 = SURFACE_STYLE_FILL_AREA(#3717); +#3717 = FILL_AREA_STYLE('',(#3718)); +#3718 = FILL_AREA_STYLE_COLOUR('',#3199); +#3719 = STYLED_ITEM('color',(#3720),#2848); +#3720 = PRESENTATION_STYLE_ASSIGNMENT((#3721)); +#3721 = SURFACE_STYLE_USAGE(.BOTH.,#3722); +#3722 = SURFACE_SIDE_STYLE('',(#3723)); +#3723 = SURFACE_STYLE_FILL_AREA(#3724); +#3724 = FILL_AREA_STYLE('',(#3725)); +#3725 = FILL_AREA_STYLE_COLOUR('',#3199); +#3726 = STYLED_ITEM('color',(#3727),#2865); +#3727 = PRESENTATION_STYLE_ASSIGNMENT((#3728)); +#3728 = SURFACE_STYLE_USAGE(.BOTH.,#3729); +#3729 = SURFACE_SIDE_STYLE('',(#3730)); +#3730 = SURFACE_STYLE_FILL_AREA(#3731); +#3731 = FILL_AREA_STYLE('',(#3732)); +#3732 = FILL_AREA_STYLE_COLOUR('',#3199); +#3733 = STYLED_ITEM('color',(#3734),#2877); +#3734 = PRESENTATION_STYLE_ASSIGNMENT((#3735)); +#3735 = SURFACE_STYLE_USAGE(.BOTH.,#3736); +#3736 = SURFACE_SIDE_STYLE('',(#3737)); +#3737 = SURFACE_STYLE_FILL_AREA(#3738); +#3738 = FILL_AREA_STYLE('',(#3739)); +#3739 = FILL_AREA_STYLE_COLOUR('',#3199); +#3740 = STYLED_ITEM('color',(#3741),#2894); +#3741 = PRESENTATION_STYLE_ASSIGNMENT((#3742)); +#3742 = SURFACE_STYLE_USAGE(.BOTH.,#3743); +#3743 = SURFACE_SIDE_STYLE('',(#3744)); +#3744 = SURFACE_STYLE_FILL_AREA(#3745); +#3745 = FILL_AREA_STYLE('',(#3746)); +#3746 = FILL_AREA_STYLE_COLOUR('',#3199); +#3747 = STYLED_ITEM('color',(#3748),#2906); +#3748 = PRESENTATION_STYLE_ASSIGNMENT((#3749)); +#3749 = SURFACE_STYLE_USAGE(.BOTH.,#3750); +#3750 = SURFACE_SIDE_STYLE('',(#3751)); +#3751 = SURFACE_STYLE_FILL_AREA(#3752); +#3752 = FILL_AREA_STYLE('',(#3753)); +#3753 = FILL_AREA_STYLE_COLOUR('',#3199); +#3754 = STYLED_ITEM('color',(#3755),#2923); +#3755 = PRESENTATION_STYLE_ASSIGNMENT((#3756)); +#3756 = SURFACE_STYLE_USAGE(.BOTH.,#3757); +#3757 = SURFACE_SIDE_STYLE('',(#3758)); +#3758 = SURFACE_STYLE_FILL_AREA(#3759); +#3759 = FILL_AREA_STYLE('',(#3760)); +#3760 = FILL_AREA_STYLE_COLOUR('',#3199); +#3761 = STYLED_ITEM('color',(#3762),#2935); +#3762 = PRESENTATION_STYLE_ASSIGNMENT((#3763)); +#3763 = SURFACE_STYLE_USAGE(.BOTH.,#3764); +#3764 = SURFACE_SIDE_STYLE('',(#3765)); +#3765 = SURFACE_STYLE_FILL_AREA(#3766); +#3766 = FILL_AREA_STYLE('',(#3767)); +#3767 = FILL_AREA_STYLE_COLOUR('',#3199); +#3768 = STYLED_ITEM('color',(#3769),#2952); +#3769 = PRESENTATION_STYLE_ASSIGNMENT((#3770)); +#3770 = SURFACE_STYLE_USAGE(.BOTH.,#3771); +#3771 = SURFACE_SIDE_STYLE('',(#3772)); +#3772 = SURFACE_STYLE_FILL_AREA(#3773); +#3773 = FILL_AREA_STYLE('',(#3774)); +#3774 = FILL_AREA_STYLE_COLOUR('',#3199); +#3775 = STYLED_ITEM('color',(#3776),#2964); +#3776 = PRESENTATION_STYLE_ASSIGNMENT((#3777)); +#3777 = SURFACE_STYLE_USAGE(.BOTH.,#3778); +#3778 = SURFACE_SIDE_STYLE('',(#3779)); +#3779 = SURFACE_STYLE_FILL_AREA(#3780); +#3780 = FILL_AREA_STYLE('',(#3781)); +#3781 = FILL_AREA_STYLE_COLOUR('',#3199); +#3782 = STYLED_ITEM('color',(#3783),#2981); +#3783 = PRESENTATION_STYLE_ASSIGNMENT((#3784)); +#3784 = SURFACE_STYLE_USAGE(.BOTH.,#3785); +#3785 = SURFACE_SIDE_STYLE('',(#3786)); +#3786 = SURFACE_STYLE_FILL_AREA(#3787); +#3787 = FILL_AREA_STYLE('',(#3788)); +#3788 = FILL_AREA_STYLE_COLOUR('',#3199); +#3789 = STYLED_ITEM('color',(#3790),#2993); +#3790 = PRESENTATION_STYLE_ASSIGNMENT((#3791)); +#3791 = SURFACE_STYLE_USAGE(.BOTH.,#3792); +#3792 = SURFACE_SIDE_STYLE('',(#3793)); +#3793 = SURFACE_STYLE_FILL_AREA(#3794); +#3794 = FILL_AREA_STYLE('',(#3795)); +#3795 = FILL_AREA_STYLE_COLOUR('',#3199); +#3796 = STYLED_ITEM('color',(#3797),#3010); +#3797 = PRESENTATION_STYLE_ASSIGNMENT((#3798)); +#3798 = SURFACE_STYLE_USAGE(.BOTH.,#3799); +#3799 = SURFACE_SIDE_STYLE('',(#3800)); +#3800 = SURFACE_STYLE_FILL_AREA(#3801); +#3801 = FILL_AREA_STYLE('',(#3802)); +#3802 = FILL_AREA_STYLE_COLOUR('',#3199); +#3803 = STYLED_ITEM('color',(#3804),#3022); +#3804 = PRESENTATION_STYLE_ASSIGNMENT((#3805)); +#3805 = SURFACE_STYLE_USAGE(.BOTH.,#3806); +#3806 = SURFACE_SIDE_STYLE('',(#3807)); +#3807 = SURFACE_STYLE_FILL_AREA(#3808); +#3808 = FILL_AREA_STYLE('',(#3809)); +#3809 = FILL_AREA_STYLE_COLOUR('',#3199); +#3810 = STYLED_ITEM('color',(#3811),#3039); +#3811 = PRESENTATION_STYLE_ASSIGNMENT((#3812)); +#3812 = SURFACE_STYLE_USAGE(.BOTH.,#3813); +#3813 = SURFACE_SIDE_STYLE('',(#3814)); +#3814 = SURFACE_STYLE_FILL_AREA(#3815); +#3815 = FILL_AREA_STYLE('',(#3816)); +#3816 = FILL_AREA_STYLE_COLOUR('',#3199); +#3817 = STYLED_ITEM('color',(#3818),#3051); +#3818 = PRESENTATION_STYLE_ASSIGNMENT((#3819)); +#3819 = SURFACE_STYLE_USAGE(.BOTH.,#3820); +#3820 = SURFACE_SIDE_STYLE('',(#3821)); +#3821 = SURFACE_STYLE_FILL_AREA(#3822); +#3822 = FILL_AREA_STYLE('',(#3823)); +#3823 = FILL_AREA_STYLE_COLOUR('',#3199); +#3824 = STYLED_ITEM('color',(#3825),#3068); +#3825 = PRESENTATION_STYLE_ASSIGNMENT((#3826)); +#3826 = SURFACE_STYLE_USAGE(.BOTH.,#3827); +#3827 = SURFACE_SIDE_STYLE('',(#3828)); +#3828 = SURFACE_STYLE_FILL_AREA(#3829); +#3829 = FILL_AREA_STYLE('',(#3830)); +#3830 = FILL_AREA_STYLE_COLOUR('',#3199); +#3831 = STYLED_ITEM('color',(#3832),#3080); +#3832 = PRESENTATION_STYLE_ASSIGNMENT((#3833)); +#3833 = SURFACE_STYLE_USAGE(.BOTH.,#3834); +#3834 = SURFACE_SIDE_STYLE('',(#3835)); +#3835 = SURFACE_STYLE_FILL_AREA(#3836); +#3836 = FILL_AREA_STYLE('',(#3837)); +#3837 = FILL_AREA_STYLE_COLOUR('',#3199); +#3838 = STYLED_ITEM('color',(#3839),#3097); +#3839 = PRESENTATION_STYLE_ASSIGNMENT((#3840)); +#3840 = SURFACE_STYLE_USAGE(.BOTH.,#3841); +#3841 = SURFACE_SIDE_STYLE('',(#3842)); +#3842 = SURFACE_STYLE_FILL_AREA(#3843); +#3843 = FILL_AREA_STYLE('',(#3844)); +#3844 = FILL_AREA_STYLE_COLOUR('',#3199); +#3845 = STYLED_ITEM('color',(#3846),#3109); +#3846 = PRESENTATION_STYLE_ASSIGNMENT((#3847)); +#3847 = SURFACE_STYLE_USAGE(.BOTH.,#3848); +#3848 = SURFACE_SIDE_STYLE('',(#3849)); +#3849 = SURFACE_STYLE_FILL_AREA(#3850); +#3850 = FILL_AREA_STYLE('',(#3851)); +#3851 = FILL_AREA_STYLE_COLOUR('',#3199); +#3852 = STYLED_ITEM('color',(#3853),#3126); +#3853 = PRESENTATION_STYLE_ASSIGNMENT((#3854)); +#3854 = SURFACE_STYLE_USAGE(.BOTH.,#3855); +#3855 = SURFACE_SIDE_STYLE('',(#3856)); +#3856 = SURFACE_STYLE_FILL_AREA(#3857); +#3857 = FILL_AREA_STYLE('',(#3858)); +#3858 = FILL_AREA_STYLE_COLOUR('',#3199); +#3859 = STYLED_ITEM('color',(#3860),#3138); +#3860 = PRESENTATION_STYLE_ASSIGNMENT((#3861)); +#3861 = SURFACE_STYLE_USAGE(.BOTH.,#3862); +#3862 = SURFACE_SIDE_STYLE('',(#3863)); +#3863 = SURFACE_STYLE_FILL_AREA(#3864); +#3864 = FILL_AREA_STYLE('',(#3865)); +#3865 = FILL_AREA_STYLE_COLOUR('',#3199); +#3866 = STYLED_ITEM('color',(#3867),#3151); +#3867 = PRESENTATION_STYLE_ASSIGNMENT((#3868)); +#3868 = SURFACE_STYLE_USAGE(.BOTH.,#3869); +#3869 = SURFACE_SIDE_STYLE('',(#3870)); +#3870 = SURFACE_STYLE_FILL_AREA(#3871); +#3871 = FILL_AREA_STYLE('',(#3872)); +#3872 = FILL_AREA_STYLE_COLOUR('',#3873); +#3873 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986); +#3874 = STYLED_ITEM('color',(#3875),#3176); +#3875 = PRESENTATION_STYLE_ASSIGNMENT((#3876)); +#3876 = SURFACE_STYLE_USAGE(.BOTH.,#3877); +#3877 = SURFACE_SIDE_STYLE('',(#3878)); +#3878 = SURFACE_STYLE_FILL_AREA(#3879); +#3879 = FILL_AREA_STYLE('',(#3880)); +#3880 = FILL_AREA_STYLE_COLOUR('',#3873); +ENDSEC; +END-ISO-10303-21;
docs/al1793afe-13-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "al1793afe-13",+ "version": "0.1.0",+ "type": "component",+ "description": "Diodes Incorporated LED Drivers, UDFN-14-EP(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "al1793afe-13",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "al1793afe-13.kicad_sym",+ "al1793afe-13.kicad_mod",+ "al1793afe-13.glb",+ "al1793afe-13.step",+ "al1793afe-13.lbr",+ "docs/hero.png",+ "docs/al1793afe-13-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "al1793afe-13-hero.glb",+ "al1793afe-13-hero.overlay.json",+ "al1793afe-13-etched.glb"+ ],+ "component": {+ "mpn": "AL1793AFE-13",+ "manufacturer": "Diodes Incorporated",+ "package": "UDFN-14-EP(4x3)",+ "pin_count": 15,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881830787895296",+ "parts": {+ "symbol": "al1793afe-13.kicad_sym",+ "footprint": "al1793afe-13.kicad_mod",+ "model_3d": "al1793afe-13-hero.glb",+ "model_3d_plain": "al1793afe-13-etched.glb",+ "model_3d_step": "al1793afe-13-etched.step",+ "model_3d_step_plain": "al1793afe-13.step",+ "lbr": "al1793afe-13.lbr"+ },+ "distributor_links": {+ "lcsc": "C67354",+ "mouser": "621-AL1793AFE-13"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T09:25:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "error"+ },+ "mouser": {+ "pn": "621-AL1793AFE-13",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable, internally pulled down; the device is enabled above about 2.5 V and disabled below 0.4 V (VIH min 2.5 V, VIL max 0.4 V)."+ },+ {+ "number": "2",+ "name": "PWM4/GND",+ "type": "power_in",+ "description": "For the AL1793 this pin is GND (PWM4 is not applicable to the AL1793, which has three channels)."+ },+ {+ "number": "3",+ "name": "PWM3/GND",+ "type": "input",+ "description": "PWM signal input for channel 3 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V."+ },+ {+ "number": "4",+ "name": "PWM2/GND",+ "type": "input",+ "description": "PWM signal input for channel 2 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V."+ },+ {+ "number": "5",+ "name": "PWM1",+ "type": "input",+ "description": "PWM signal input for channel 1, internally pulled down; tie to GND when channel 1 is not used. Digital PWM frequency 0.5 to 4 kHz, minimum on-time 2.5 µs; analog dimming 0.4 V to 1.5 V."+ },+ {+ "number": "6",+ "name": "LED1",+ "type": "output",+ "description": "Channel 1 LED cathode (current sink); regulated current up to 500 mA via RSET, with LED short protection at a 6 V threshold."+ },+ {+ "number": "7",+ "name": "LED2/GND",+ "type": "output",+ "description": "Channel 2 LED cathode (current sink) for the AL1793; not GND on this variant."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "9",+ "name": "LED3/GND",+ "type": "output",+ "description": "Channel 3 LED cathode (current sink) for the AL1793; not GND on this variant."+ },+ {+ "number": "10",+ "name": "LED4/GND",+ "type": "power_in",+ "description": "For the AL1793 this pin is GND (channel 4 is not applicable to the AL1793)."+ },+ {+ "number": "11",+ "name": "LEDPG",+ "type": "output",+ "description": "LED power-good indication, asserted low to report insufficient LED headroom; requires an external pull-up resistor (open-drain style)."+ },+ {+ "number": "12",+ "name": "FAULTB",+ "type": "output",+ "description": "Fault report, asserted low for LED open/short, over-temperature or UVLO; open-drain output that requires an external pull-up resistor; FAULTB leakage max 1 µA at 6 V, low-level max 180 mV at 1 mA."+ },+ {+ "number": "13",+ "name": "REF",+ "type": "passive",+ "description": "Reference current setting through an external resistor RSET (VREF 1.5 V typical; IREF 0.125 mA at RSET = 12 kΩ)."+ },+ {+ "number": "14",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input, 6.5 V to 30 V recommended operating range; UVLO releases at 6.3 V rising with 300 mV hysteresis."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed pad is listed in the pin table ('Exposed PAD, internally connected to GND, should be ext; Pins 2, 3, 4, 7, 9 and 10 are multi-function in the datasheet. Descriptions and types were taken for; The datasheet has no explicit output-type or electrical limits for the LEDx current-sink pins or the",+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0996,+ "at": "2026-10-19T09:22:59"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881830787895296",+ "pages": 18,+ "sha256": "b00e0b817e901edf",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "al1793afe-13.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "be5cff1a18ac6ffbe197561441c1546755e61de7ca02dcc6734fc20d3d6c79dd",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "al1793afe-13-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5fdb34d6011c336f79789a11ca7b93f72f471958ce94966b738250e73759f24e",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+242@@ -0,0 +1,242 @@+{+ "slug": "al1793afe-13",+ "version": "0.1.0",+ "type": "component",+ "description": "Diodes Incorporated LED Drivers, UDFN-14-EP(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "al1793afe-13",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "al1793afe-13.kicad_sym",+ "al1793afe-13.kicad_mod",+ "al1793afe-13.glb",+ "al1793afe-13.step",+ "al1793afe-13.lbr",+ "docs/hero.png",+ "docs/al1793afe-13-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "al1793afe-13-hero.glb",+ "al1793afe-13-hero.overlay.json",+ "al1793afe-13-etched.glb"+ ],+ "component": {+ "mpn": "AL1793AFE-13",+ "manufacturer": "Diodes Incorporated",+ "package": "UDFN-14-EP(4x3)",+ "pin_count": 15,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881830787895296",+ "parts": {+ "symbol": "al1793afe-13.kicad_sym",+ "footprint": "al1793afe-13.kicad_mod",+ "model_3d": "al1793afe-13-hero.glb",+ "model_3d_plain": "al1793afe-13-etched.glb",+ "model_3d_step": "al1793afe-13-etched.step",+ "model_3d_step_plain": "al1793afe-13.step",+ "lbr": "al1793afe-13.lbr"+ },+ "distributor_links": {+ "lcsc": "C67354",+ "mouser": "621-AL1793AFE-13"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T09:25:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "error"+ },+ "mouser": {+ "pn": "621-AL1793AFE-13",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable, internally pulled down; the device is enabled above about 2.5 V and disabled below 0.4 V (VIH min 2.5 V, VIL max 0.4 V)."+ },+ {+ "number": "2",+ "name": "PWM4/GND",+ "type": "power_in",+ "description": "For the AL1793 this pin is GND (PWM4 is not applicable to the AL1793, which has three channels)."+ },+ {+ "number": "3",+ "name": "PWM3/GND",+ "type": "input",+ "description": "PWM signal input for channel 3 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V."+ },+ {+ "number": "4",+ "name": "PWM2/GND",+ "type": "input",+ "description": "PWM signal input for channel 2 on the AL1793, internally pulled down; VIH min 2.5 V, VIL max 0.3 V, absolute maximum 7 V."+ },+ {+ "number": "5",+ "name": "PWM1",+ "type": "input",+ "description": "PWM signal input for channel 1, internally pulled down; tie to GND when channel 1 is not used. Digital PWM frequency 0.5 to 4 kHz, minimum on-time 2.5 µs; analog dimming 0.4 V to 1.5 V."+ },+ {+ "number": "6",+ "name": "LED1",+ "type": "output",+ "description": "Channel 1 LED cathode (current sink); regulated current up to 500 mA via RSET, with LED short protection at a 6 V threshold."+ },+ {+ "number": "7",+ "name": "LED2/GND",+ "type": "output",+ "description": "Channel 2 LED cathode (current sink) for the AL1793; not GND on this variant."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "9",+ "name": "LED3/GND",+ "type": "output",+ "description": "Channel 3 LED cathode (current sink) for the AL1793; not GND on this variant."+ },+ {+ "number": "10",+ "name": "LED4/GND",+ "type": "power_in",+ "description": "For the AL1793 this pin is GND (channel 4 is not applicable to the AL1793)."+ },+ {+ "number": "11",+ "name": "LEDPG",+ "type": "output",+ "description": "LED power-good indication, asserted low to report insufficient LED headroom; requires an external pull-up resistor (open-drain style)."+ },+ {+ "number": "12",+ "name": "FAULTB",+ "type": "output",+ "description": "Fault report, asserted low for LED open/short, over-temperature or UVLO; open-drain output that requires an external pull-up resistor; FAULTB leakage max 1 µA at 6 V, low-level max 180 mV at 1 mA."+ },+ {+ "number": "13",+ "name": "REF",+ "type": "passive",+ "description": "Reference current setting through an external resistor RSET (VREF 1.5 V typical; IREF 0.125 mA at RSET = 12 kΩ)."+ },+ {+ "number": "14",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input, 6.5 V to 30 V recommended operating range; UVLO releases at 6.3 V rising with 300 mV hysteresis."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed pad is listed in the pin table ('Exposed PAD, internally connected to GND, should be ext; Pins 2, 3, 4, 7, 9 and 10 are multi-function in the datasheet. Descriptions and types were taken for; The datasheet has no explicit output-type or electrical limits for the LEDx current-sink pins or the",+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0996,+ "at": "2026-10-19T09:22:59"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881830787895296",+ "pages": 18,+ "sha256": "b00e0b817e901edf",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "al1793afe-13.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "be5cff1a18ac6ffbe197561441c1546755e61de7ca02dcc6734fc20d3d6c79dd",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "al1793afe-13-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5fdb34d6011c336f79789a11ca7b93f72f471958ce94966b738250e73759f24e",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>al1793afe-13</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>al1793afe-13</title>