ai03c-ssop10

@@ -33,5 +33,90 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AI03C ssop10",+    "manufacturer": "Sam wing AI03C ssop10",+    "package": "SSOP-10-150mil",+    "pin_count": 10,+    "category": "Touch Sensors",+    "parts": {+      "symbol": "ai03c-ssop10.kicad_sym",+      "footprint": "ai03c-ssop10.kicad_mod",+      "model_3d": "ai03c-ssop10-etched.glb",+      "model_3d_plain": "ai03c-ssop10.glb",+      "model_3d_step": "ai03c-ssop10-etched.step",+      "model_3d_step_plain": "ai03c-ssop10.step",+      "lbr": "ai03c-ssop10.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "C1",+        "type": "passive",+        "description": "Internal reference (balance) capacitor interface. Connect a 1-10 nF NPO capacitor to GND (4.7 nF recommended). Should be placed close to the IC."+      },+      {+        "number": "2",+        "name": "CSEL",+        "type": "passive",+        "description": "Sensitivity-adjust capacitor interface. Connect a 0-100 pF NPO capacitor to GND; smaller value gives higher sensitivity. Should be placed close to the IC."+      },+      {+        "number": "3",+        "name": "KEY1",+        "type": "input",+        "description": "Capacitive touch sensing input for channel 1. Connect to touch pad (typically 3mm-30mm square) through a ~1 kΩ series resistor."+      },+      {+        "number": "4",+        "name": "KEY2",+        "type": "input",+        "description": "Capacitive touch sensing input for channel 2. Connect to touch pad through a ~1 kΩ series resistor."+      },+      {+        "number": "5",+        "name": "KEY3",+        "type": "input",+        "description": "Capacitive touch sensing input for channel 3. Connect to touch pad through a ~1 kΩ series resistor."+      },+      {+        "number": "6",+        "name": "OUT3",+        "type": "output",+        "description": "Open-drain output for KEY3. Pulls low when KEY3 is touched, high-impedance otherwise. Requires an external pull-up resistor (typ. 10 kΩ)."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Open-drain output for KEY2. Pulls low when KEY2 is touched, high-impedance otherwise. Requires an external pull-up resistor (typ. 10 kΩ)."+      },+      {+        "number": "8",+        "name": "OUT1",+        "type": "output",+        "description": "Open-drain output for KEY1. Pulls low when KEY1 is touched, high-impedance otherwise. Requires an external pull-up resistor (typ. 10 kΩ)."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply input, 2.5 V to 5.5 V (absolute max 6.0 V). Typical current 394 µA at 3.0 V / 666 µA at 5.0 V; sleep current 7 µA / 11 µA. Datasheet recommends a 20 Ω series resistor from the supply rail and a 100 nF decoupling capacitor to GND."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (supply return). 0 V reference for all pins."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}