component
AI01C
Public Made by Adomby adom
Sam wing Touch Sensors, SOT-23-6L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -30,6 +30,20 @@ AI01C from Sam wing, in a SOT-23-6L. Pinout and pin descriptions extracted from - Footprint: `Package_TO_SOT_SMD:SOT-23-6` - 3D model: SOT-23-6L (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`ai01c.step`](ai01c.step) | 97 KB | You want the bare part, or you mark your own boards. |+| [`ai01c-etched.step`](ai01c-etched.step) | 1.0 MB | You want the part with `AI01C` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 271 faces against 117 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "ai01c",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Sam wing Touch Sensors, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+8−8@@ -4,7 +4,7 @@ "slug": "ai01c", "title": "AI01C", "brief": "Sam wing Touch Sensors, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "number": "1", "name": "OUT", "type": "output",- "description": "Key-detect output. Behavior is selected by MD: MD=floating gives an open-drain active-low output (requires external pull-up, e.g. 10 k\u03a9); MD=VDD gives push-pull active-high direct output; MD=GND gives a toggle/latch output (each press flips the state). Output sink current up to 10 mA at VCC=5 V; low-level output impedance ~50 \u03a9, high-Z ~100 M\u03a9."+ "description": "Key-detect output. Behavior is selected by MD: MD=floating gives an open-drain active-low output (requires external pull-up, e.g. 10 kΩ); MD=VDD gives push-pull active-high direct output; MD=GND gives a toggle/latch output (each press flips the state). Output sink current up to 10 mA at VCC=5 V; low-level output impedance ~50 Ω, high-Z ~100 MΩ." }, { "number": "2",@@ -46,7 +46,7 @@ "number": "3", "name": "KEY", "type": "input",- "description": "Capacitive touch sense input. Connect to the touch pad/electrode through a series resistor RX (recommended 2 k\u03a9, range 0-5 k\u03a9). An optional CSEL capacitor (0-10 pF) from this pin to GND trims sensitivity; smaller CSEL = higher sensitivity, floating = maximum sensitivity."+ "description": "Capacitive touch sense input. Connect to the touch pad/electrode through a series resistor RX (recommended 2 kΩ, range 0-5 kΩ). An optional CSEL capacitor (0-10 pF) from this pin to GND trims sensitivity; smaller CSEL = higher sensitivity, floating = maximum sensitivity." }, { "number": "4",@@ -58,7 +58,7 @@ "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive supply input, 2.5 V to 6.5 V. Typical Idd \u2248 666 \u00b5A at 5 V, 394 \u00b5A at 3 V (active); ~11 \u00b5A (5 V) / ~7 \u00b5A (3 V) in sleep. A 20 \u03a9 series resistor between the board VDD rail and this pin is recommended (do not omit), and a 100 nF decoupling cap should be placed as close as possible to the pin."+ "description": "Positive supply input, 2.5 V to 6.5 V. Typical Idd ≈ 666 µA at 5 V, 394 µA at 3 V (active); ~11 µA (5 V) / ~7 µA (3 V) in sleep. A 20 Ω series resistor between the board VDD rail and this pin is recommended (do not omit), and a 100 nF decoupling cap should be placed as close as possible to the pin." }, { "number": "6",@@ -138,9 +138,9 @@ "docs/hero.png", "docs/ai01c-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Sam wing Touch Sensors, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D." }