component
AI01C
Public Made by Adomby adom
Sam wing Touch Sensors, SOT-23-6L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+207−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/ai01c-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+205@@ -0,0 +1,205 @@+{+ "schema": "adom.pads/1",+ "slug": "ai01c",+ "footprint": "SOT-23-6",+ "generated_from": {+ "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -1.1375,+ -0.95+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"+ },+ "pad_count": 6,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "OUT",+ "type": "output",+ "description": "Key-detect output. Behavior is selected by MD: MD=floating gives an open-drain active-low output (requires external pull-up, e.g. 10 kΩ); MD=VDD gives push-pull active-high direct output; MD=GND gives a toggle/latch output (each press flips the state). Output sink current up to 10 mA at VCC=5 V; low-level output impedance ~50 Ω, high-Z ~100 MΩ.",+ "is_pin1": true,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply reference (0 V).",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "KEY",+ "type": "input",+ "description": "Capacitive touch sense input. Connect to the touch pad/electrode through a series resistor RX (recommended 2 kΩ, range 0-5 kΩ). An optional CSEL capacitor (0-10 pF) from this pin to GND trims sensitivity; smaller CSEL = higher sensitivity, floating = maximum sensitivity.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "MD",+ "type": "input",+ "description": "Mode-select input with three states: floating = open-drain active-low output on OUT (needs external pull-up); tied to VDD = push-pull active-high direct output; tied to GND = toggle/latch (self-locking) output starting at low.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input, 2.5 V to 6.5 V. Typical Idd ≈ 666 µA at 5 V, 394 µA at 3 V (active); ~11 µA (5 V) / ~7 µA (3 V) in sleep. A 20 Ω series resistor between the board VDD rail and this pin is recommended (do not omit), and a 100 nF decoupling cap should be placed as close as possible to the pin.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "C1",+ "type": "passive",+ "description": "Internal reference-capacitor connection. Connect a 4.7 nF capacitor (allowable range 1 nF - 10 nF) from this pin to GND, placed close to the chip. Required for correct capacitive sensing operation.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}