AFC10-S11QCA-00

@@ -0,0 +1,366 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AFC10-S11QCA-00",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 13,+      "span_mm": 13.8,+      "dash_mm": 0.345,+      "gap_mm": 0.207,+      "pad_stroke_mm": 0.0828+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 6,+      "pin1": {+        "source": "added dot (AI)",+        "pad": "1",+        "center_mm": [+          -5.632,+          -2.0+        ],+        "r_mm": 0.132+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 12,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 12+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.104,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -6.5,+      6.5,+      -2.475,+      2.475+    ],+    "pads_bbox_mm": [+      -6.9,+      6.9,+      -2.775,+      2.775+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "afc10-s11qca-00.glb",+    "glb_sha256": "8a9f74dd7bb3de2e5ddb202707edf37d5081fe41a814b7ac61e42c7f9b8de2b4",+    "footprint": "afc10-s11qca-00.kicad_mod",+    "footprint_sha256": "d028553d056ca9f4d2366c9fff9842481779877698700c59e1d717b843177f77",+    "pins": "page.json component.pins",+    "pins_sha256": "c0ed5447e68a1531dcf5a74a94b5751994954c6df192703e5e18caaec139985a"+  },+  "generator": "adom-wiki 1.8.11 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "1",+      "x": -5.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "2",+      "text": "2",+      "x": -4.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "3",+      "text": "3",+      "x": -3.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "4",+      "text": "4",+      "x": -2.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "5",+      "text": "5",+      "x": -1.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "6",+      "text": "6",+      "x": 0.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "7",+      "text": "7",+      "x": 1.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "8",+      "text": "8",+      "x": 2.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "9",+      "text": "9",+      "x": 3.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "10",+      "text": "10",+      "x": 4.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "11",+      "text": "11",+      "x": 5.0,+      "y": -2.9,+      "align": "left",+      "vertical": true,+      "h": 0.5+    },+    {+      "pad": "MP",+      "text": "MP",+      "x": -7.05,+      "y": 1.875,+      "align": "right",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -5.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -3.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        3.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        4.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        5.0,+        -2.0+      ],+      "size_mm": [+        0.6,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "MP",+      "shape": "roundrect",+      "center_mm": [+        -6.3,+        1.875+      ],+      "size_mm": [+        1.2,+        1.8+      ],+      "rot": 0.0+    },+    {+      "number": "MP",+      "shape": "roundrect",+      "center_mm": [+        6.3,+        1.875+      ],+      "size_mm": [+        1.2,+        1.8+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,254 @@+(footprint "JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "JST SH series connector, SM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf)")+	(tags "connector JST SH horizontal")+	(property "Reference" "REF**"+		(at 0 -3.98 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal"+		(at 0 3.98 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "connector/SMD_single_row_plus_mounting_pad"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -6.61 -1.785)+		(end -5.56 -1.785)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -6.61 0.715)+		(end -6.61 -1.785)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -5.56 -1.785)+		(end -5.56 -2.775)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -5.44 2.685)+		(end 5.44 2.685)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 6.61 -1.785)+		(end 5.56 -1.785)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 6.61 0.715)+		(end 6.61 -1.785)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -6.5 -1.675)+		(end -6.5 2.575)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -6.5 -1.675)+		(end 6.5 -1.675)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -6.5 2.575)+		(end 6.5 2.575)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -5.5 -1.675)+		(end -5 -0.967893)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -5 -0.967893)+		(end -4.5 -1.675)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start 6.5 -1.675)+		(end 6.5 2.575)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -5 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -4 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -3 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -1 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at 0 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at 1 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at 2 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at 3 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at 4 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at 5 -2)+		(size 0.6 1.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "MP" smd roundrect+		(at -6.3 1.875)+		(size 1.2 1.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.208333)+	)+	(pad "MP" smd roundrect+		(at 6.3 1.875)+		(size 1.2 1.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.208333)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -7.15 0.72) (xy -6.75 0.72) (xy -6.75 -1.93) (xy -5.55 -1.93) (xy -5.55 -3.03) (xy 5.55 -3.03) (xy 5.55 -1.93) (xy 6.75 -1.93) (xy 6.75 0.72) (xy 7.15 0.72) (xy 7.15 3.03) (xy 5.45 3.03) (xy 5.45 2.83) (xy -5.45 2.83) (xy -5.45 3.03) (xy -7.15 3.03))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,135 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal">+  <description>JST, 1.00 mm pitch. JST SH series connector, SM11B-SRSS-TB</description>+  <smd name="1" x="-5.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="2" x="-4.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="3" x="-3.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="4" x="-2.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="5" x="-1.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="6" x="0.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="7" x="1.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="8" x="2.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="9" x="3.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="10" x="4.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="11" x="5.0000" y="2.0000" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+  <smd name="MP" x="-6.3000" y="-1.8750" dx="1.2000" dy="1.8000" layer="1" roundness="42"/>+  <smd name="MP@2" x="6.3000" y="-1.8750" dx="1.2000" dy="1.8000" layer="1" roundness="42"/>+  <wire x1="-6.6100" y1="1.7850" x2="-5.5600" y2="1.7850" width="0.1200" layer="21"/>+  <wire x1="-6.6100" y1="-0.7150" x2="-6.6100" y2="1.7850" width="0.1200" layer="21"/>+  <wire x1="-5.5600" y1="1.7850" x2="-5.5600" y2="2.7750" width="0.1200" layer="21"/>+  <wire x1="-5.4400" y1="-2.6850" x2="5.4400" y2="-2.6850" width="0.1200" layer="21"/>+  <wire x1="6.6100" y1="1.7850" x2="5.5600" y2="1.7850" width="0.1200" layer="21"/>+  <wire x1="6.6100" y1="-0.7150" x2="6.6100" y2="1.7850" width="0.1200" layer="21"/>+  <wire x1="-6.5000" y1="1.6750" x2="-6.5000" y2="-2.5750" width="0.1000" layer="51"/>+  <wire x1="-6.5000" y1="1.6750" x2="6.5000" y2="1.6750" width="0.1000" layer="51"/>+  <wire x1="-6.5000" y1="-2.5750" x2="6.5000" y2="-2.5750" width="0.1000" layer="51"/>+  <wire x1="-5.5000" y1="1.6750" x2="-5.0000" y2="0.9679" width="0.1000" layer="51"/>+  <wire x1="-5.0000" y1="0.9679" x2="-4.5000" y2="1.6750" width="0.1000" layer="51"/>+  <wire x1="6.5000" y1="1.6750" x2="6.5000" y2="-2.5750" width="0.1000" layer="51"/>+  <text x="0" y="3.375" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-3.375" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="AFC10-S11QCA-00">+  <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+  <wire x1="12.7" y1="7.62" x2="12.7" y2="-10.16" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-10.16" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+  <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-12.7000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="1" x="-17.78" y="5.08" length="middle" direction="pas"/>+  <pin name="2" x="-17.78" y="2.54" length="middle" direction="pas"/>+  <pin name="3" x="-17.78" y="0" length="middle" direction="pas"/>+  <pin name="4" x="-17.78" y="-2.54" length="middle" direction="pas"/>+  <pin name="5" x="-17.78" y="-5.08" length="middle" direction="pas"/>+  <pin name="6" x="-17.78" y="-7.62" length="middle" direction="pas"/>+  <pin name="11" x="17.78" y="5.08" length="middle" direction="pas" rot="R180"/>+  <pin name="10" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="9" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+  <pin name="8" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="7" x="17.78" y="-5.08" length="middle" direction="pas" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="AFC10-S11QCA-00" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="AFC10-S11QCA-00" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal">+      <connects>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+        <connect gate="G$1" pin="3" pad="3"/>+        <connect gate="G$1" pin="4" pad="4"/>+        <connect gate="G$1" pin="5" pad="5"/>+        <connect gate="G$1" pin="6" pad="6"/>+        <connect gate="G$1" pin="11" pad="11"/>+        <connect gate="G$1" pin="10" pad="10"/>+        <connect gate="G$1" pin="9" pad="9"/>+        <connect gate="G$1" pin="8" pad="8"/>+        <connect gate="G$1" pin="7" pad="7"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,3429 @@+ISO-10303-21;+HEADER;+/* JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal','JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#3192);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#95,#356,#373,#388,#403,#418,#513,#548,#563,#578,#593,#608,#787,#830,#845,#862,#880,#901,#913,#939,#953,#974,#998,#1012,#1033,#1057,#1071,#1092,#1116,#1130,#1151,#1175,#1189,#1210,#1234,#1248,#1269,#1293,#1307,#1328,#1352,#1366,#1387,#1411,#1425,#1446,#1470,#1484,#1505,#1529,#1543,#1564,#1579,#1590,#1606,#1620,#1652,#1667,#1681,#1691,#1705,#1733,#1744,#1757,#1764,#1774,#1799,#1808,#1815,#1825,#1834,#1843,#1852,#1861,#1870,#1879,#1888,#1897,#1906,#1915,#1924,#1939,#1949,#1959,#1967,#1980,#1989,#1997,#2007,#2015,#2025,#2033,#2043,#2051,#2061,#2069,#2079,#2087,#2097,#2105,#2115,#2123,#2133,#2141,#2151,#2159,#2169,#2177,#2187,#2195,#2201,#2449,#2452,#2474,#2488,#2502,#2514,#2534,#2549,#2563,#2573,#2593,#2608,#2622,#2632,#2652,#2667,#2681,#2691,#2711,#2726,#2740,#2750,#2770,#2785,#2799,#2809,#2829,#2844,#2858,#2868,#2888,#2903,#2917,#2927,#2947,#2962,#2976,#2986,#3006,#3021,#3035,#3045,#3065,#3080,#3094,#3104,#3112,#3120,#3128,#3136,#3144,#3152,#3160,#3168,#3176,#3184));+#17=ADVANCED_FACE('',(#18),#92,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#36,#41,#46,#51,#58,#64,#70,#77,#84,#89));+#20=ORIENTED_EDGE('',*,*,#21,.F.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-6.5,1.775,6.E-02));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(-6.5,-0.975,6.E-02));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(0.,-1.,1.110223024625E-16));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#22,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(-6.5,1.775,1.46));+#33=LINE('',#23,#34);+#34=VECTOR('',#35,1.);+#35=DIRECTION('',(0.,1.110223024625E-16,1.));+#36=ORIENTED_EDGE('',*,*,#37,.T.);+#37=EDGE_CURVE('',#31,#38,#40,.T.);+#38=VERTEX_POINT('',#39);+#39=CARTESIAN_POINT('',(-6.5,1.225,1.46));+#40=LINE('',#32,#27);+#41=ORIENTED_EDGE('',*,*,#42,.T.);+#42=EDGE_CURVE('',#38,#43,#45,.T.);+#43=VERTEX_POINT('',#44);+#44=CARTESIAN_POINT('',(-6.5,1.225,2.46));+#45=LINE('',#39,#34);+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#43,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(-6.5,0.575,2.46));+#50=LINE('',#44,#27);+#51=ORIENTED_EDGE('',*,*,#52,.T.);+#52=EDGE_CURVE('',#48,#53,#55,.T.);+#53=VERTEX_POINT('',#54);+#54=CARTESIAN_POINT('',(-6.5,0.286,2.96));+#55=LINE('',#49,#56);+#56=VECTOR('',#57,1.);+#57=DIRECTION('',(0.,-0.500421834463,0.865781720524));+#58=ORIENTED_EDGE('',*,*,#59,.T.);+#59=EDGE_CURVE('',#53,#60,#62,.T.);+#60=VERTEX_POINT('',#61);+#61=CARTESIAN_POINT('',(-6.5,-2.475,2.96));+#62=LINE('',#63,#27);+#63=CARTESIAN_POINT('',(-6.5,1.775,2.96));+#64=ORIENTED_EDGE('',*,*,#65,.F.);+#65=EDGE_CURVE('',#66,#60,#68,.T.);+#66=VERTEX_POINT('',#67);+#67=CARTESIAN_POINT('',(-6.5,-2.475,1.26));+#68=LINE('',#69,#34);+#69=CARTESIAN_POINT('',(-6.5,-2.475,6.E-02));+#70=ORIENTED_EDGE('',*,*,#71,.T.);+#71=EDGE_CURVE('',#66,#72,#74,.T.);+#72=VERTEX_POINT('',#73);+#73=CARTESIAN_POINT('',(-6.5,-1.975,1.26));+#74=LINE('',#67,#75);+#75=VECTOR('',#76,1.);+#76=DIRECTION('',(0.,1.,-1.110223024625E-16));+#77=ORIENTED_EDGE('',*,*,#78,.T.);+#78=EDGE_CURVE('',#72,#79,#81,.T.);+#79=VERTEX_POINT('',#80);+#80=CARTESIAN_POINT('',(-6.5,-1.975,0.61));+#81=LINE('',#73,#82);+#82=VECTOR('',#83,1.);+#83=DIRECTION('',(0.,-1.110223024625E-16,-1.));+#84=ORIENTED_EDGE('',*,*,#85,.T.);+#85=EDGE_CURVE('',#79,#86,#88,.T.);+#86=VERTEX_POINT('',#87);+#87=CARTESIAN_POINT('',(-6.5,-0.975,0.61));+#88=LINE('',#80,#75);+#89=ORIENTED_EDGE('',*,*,#90,.T.);+#90=EDGE_CURVE('',#86,#24,#91,.T.);+#91=LINE('',#87,#82);+#92=PLANE('',#93);+#93=AXIS2_PLACEMENT_3D('',#23,#94,#28);+#94=DIRECTION('',(1.,0.,0.));+#95=ADVANCED_FACE('',(#96),#354,.F.);+#96=FACE_BOUND('',#97,.F.);+#97=EDGE_LOOP('',(#98,#105,#111,#118,#123,#128,#132,#137,#142,#147,#151,#156,#161,#166,#170,#175,#180,#185,#189,#194,#199,#204,#208,#213,#218,#223,#227,#232,#237,#242,#246,#251,#256,#261,#265,#270,#275,#280,#284,#289,#294,#299,#303,#308,#313,#318,#320,#321,#326,#330,#337,#342,#347,#352));+#98=ORIENTED_EDGE('',*,*,#99,.F.);+#99=EDGE_CURVE('',#100,#102,#104,.T.);+#100=VERTEX_POINT('',#101);+#101=CARTESIAN_POINT('',(6.5,1.775,6.E-02));+#102=VERTEX_POINT('',#103);+#103=CARTESIAN_POINT('',(6.5,-0.975,6.E-02));+#104=LINE('',#101,#27);+#105=ORIENTED_EDGE('',*,*,#106,.F.);+#106=EDGE_CURVE('',#107,#100,#109,.T.);+#107=VERTEX_POINT('',#108);+#108=CARTESIAN_POINT('',(5.1,1.775,6.E-02));+#109=LINE('',#23,#110);+#110=VECTOR('',#94,1.);+#111=ORIENTED_EDGE('',*,*,#112,.F.);+#112=EDGE_CURVE('',#113,#107,#115,.T.);+#113=VERTEX_POINT('',#114);+#114=CARTESIAN_POINT('',(5.1,1.675,6.E-02));+#115=LINE('',#114,#116);+#116=VECTOR('',#117,1.);+#117=DIRECTION('',(0.,1.,0.));+#118=ORIENTED_EDGE('',*,*,#119,.F.);+#119=EDGE_CURVE('',#120,#113,#122,.T.);+#120=VERTEX_POINT('',#121);+#121=CARTESIAN_POINT('',(4.9,1.675,6.E-02));+#122=LINE('',#121,#110);+#123=ORIENTED_EDGE('',*,*,#124,.T.);+#124=EDGE_CURVE('',#120,#125,#127,.T.);+#125=VERTEX_POINT('',#126);+#126=CARTESIAN_POINT('',(4.9,1.775,6.E-02));+#127=LINE('',#121,#116);+#128=ORIENTED_EDGE('',*,*,#129,.F.);+#129=EDGE_CURVE('',#130,#125,#109,.T.);+#130=VERTEX_POINT('',#131);+#131=CARTESIAN_POINT('',(4.1,1.775,6.E-02));+#132=ORIENTED_EDGE('',*,*,#133,.F.);+#133=EDGE_CURVE('',#134,#130,#136,.T.);+#134=VERTEX_POINT('',#135);+#135=CARTESIAN_POINT('',(4.1,1.675,6.E-02));+#136=LINE('',#135,#116);+#137=ORIENTED_EDGE('',*,*,#138,.F.);+#138=EDGE_CURVE('',#139,#134,#141,.T.);+#139=VERTEX_POINT('',#140);+#140=CARTESIAN_POINT('',(3.9,1.675,6.E-02));+#141=LINE('',#140,#110);+#142=ORIENTED_EDGE('',*,*,#143,.T.);+#143=EDGE_CURVE('',#139,#144,#146,.T.);+#144=VERTEX_POINT('',#145);+#145=CARTESIAN_POINT('',(3.9,1.775,6.E-02));+#146=LINE('',#140,#116);+#147=ORIENTED_EDGE('',*,*,#148,.F.);+#148=EDGE_CURVE('',#149,#144,#109,.T.);+#149=VERTEX_POINT('',#150);+#150=CARTESIAN_POINT('',(3.1,1.775,6.E-02));+#151=ORIENTED_EDGE('',*,*,#152,.F.);+#152=EDGE_CURVE('',#153,#149,#155,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(3.1,1.675,6.E-02));+#155=LINE('',#154,#116);+#156=ORIENTED_EDGE('',*,*,#157,.F.);+#157=EDGE_CURVE('',#158,#153,#160,.T.);+#158=VERTEX_POINT('',#159);+#159=CARTESIAN_POINT('',(2.9,1.675,6.E-02));+#160=LINE('',#159,#110);+#161=ORIENTED_EDGE('',*,*,#162,.T.);+#162=EDGE_CURVE('',#158,#163,#165,.T.);+#163=VERTEX_POINT('',#164);+#164=CARTESIAN_POINT('',(2.9,1.775,6.E-02));+#165=LINE('',#159,#116);+#166=ORIENTED_EDGE('',*,*,#167,.F.);+#167=EDGE_CURVE('',#168,#163,#109,.T.);+#168=VERTEX_POINT('',#169);+#169=CARTESIAN_POINT('',(2.1,1.775,6.E-02));+#170=ORIENTED_EDGE('',*,*,#171,.F.);+#171=EDGE_CURVE('',#172,#168,#174,.T.);+#172=VERTEX_POINT('',#173);+#173=CARTESIAN_POINT('',(2.1,1.675,6.E-02));+#174=LINE('',#173,#116);+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#177,#172,#179,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(1.9,1.675,6.E-02));+#179=LINE('',#178,#110);+#180=ORIENTED_EDGE('',*,*,#181,.T.);+#181=EDGE_CURVE('',#177,#182,#184,.T.);+#182=VERTEX_POINT('',#183);+#183=CARTESIAN_POINT('',(1.9,1.775,6.E-02));+#184=LINE('',#178,#116);+#185=ORIENTED_EDGE('',*,*,#186,.F.);+#186=EDGE_CURVE('',#187,#182,#109,.T.);+#187=VERTEX_POINT('',#188);+#188=CARTESIAN_POINT('',(1.1,1.775,6.E-02));+#189=ORIENTED_EDGE('',*,*,#190,.F.);+#190=EDGE_CURVE('',#191,#187,#193,.T.);+#191=VERTEX_POINT('',#192);+#192=CARTESIAN_POINT('',(1.1,1.675,6.E-02));+#193=LINE('',#192,#116);+#194=ORIENTED_EDGE('',*,*,#195,.F.);+#195=EDGE_CURVE('',#196,#191,#198,.T.);+#196=VERTEX_POINT('',#197);+#197=CARTESIAN_POINT('',(0.9,1.675,6.E-02));+#198=LINE('',#197,#110);+#199=ORIENTED_EDGE('',*,*,#200,.T.);+#200=EDGE_CURVE('',#196,#201,#203,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(0.9,1.775,6.E-02));+#203=LINE('',#197,#116);+#204=ORIENTED_EDGE('',*,*,#205,.F.);+#205=EDGE_CURVE('',#206,#201,#109,.T.);+#206=VERTEX_POINT('',#207);+#207=CARTESIAN_POINT('',(0.1,1.775,6.E-02));+#208=ORIENTED_EDGE('',*,*,#209,.F.);+#209=EDGE_CURVE('',#210,#206,#212,.T.);+#210=VERTEX_POINT('',#211);+#211=CARTESIAN_POINT('',(0.1,1.675,6.E-02));+#212=LINE('',#211,#116);+#213=ORIENTED_EDGE('',*,*,#214,.F.);+#214=EDGE_CURVE('',#215,#210,#217,.T.);+#215=VERTEX_POINT('',#216);+#216=CARTESIAN_POINT('',(-1.E-01,1.675,6.E-02));+#217=LINE('',#216,#110);+#218=ORIENTED_EDGE('',*,*,#219,.T.);+#219=EDGE_CURVE('',#215,#220,#222,.T.);+#220=VERTEX_POINT('',#221);+#221=CARTESIAN_POINT('',(-1.E-01,1.775,6.E-02));+#222=LINE('',#216,#116);+#223=ORIENTED_EDGE('',*,*,#224,.F.);+#224=EDGE_CURVE('',#225,#220,#109,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(-0.9,1.775,6.E-02));+#227=ORIENTED_EDGE('',*,*,#228,.F.);+#228=EDGE_CURVE('',#229,#225,#231,.T.);+#229=VERTEX_POINT('',#230);+#230=CARTESIAN_POINT('',(-0.9,1.675,6.E-02));+#231=LINE('',#230,#116);+#232=ORIENTED_EDGE('',*,*,#233,.F.);+#233=EDGE_CURVE('',#234,#229,#236,.T.);+#234=VERTEX_POINT('',#235);+#235=CARTESIAN_POINT('',(-1.1,1.675,6.E-02));+#236=LINE('',#235,#110);+#237=ORIENTED_EDGE('',*,*,#238,.T.);+#238=EDGE_CURVE('',#234,#239,#241,.T.);+#239=VERTEX_POINT('',#240);+#240=CARTESIAN_POINT('',(-1.1,1.775,6.E-02));+#241=LINE('',#235,#116);+#242=ORIENTED_EDGE('',*,*,#243,.F.);+#243=EDGE_CURVE('',#244,#239,#109,.T.);+#244=VERTEX_POINT('',#245);+#245=CARTESIAN_POINT('',(-1.9,1.775,6.E-02));+#246=ORIENTED_EDGE('',*,*,#247,.F.);+#247=EDGE_CURVE('',#248,#244,#250,.T.);+#248=VERTEX_POINT('',#249);+#249=CARTESIAN_POINT('',(-1.9,1.675,6.E-02));+#250=LINE('',#249,#116);+#251=ORIENTED_EDGE('',*,*,#252,.F.);+#252=EDGE_CURVE('',#253,#248,#255,.T.);+#253=VERTEX_POINT('',#254);+#254=CARTESIAN_POINT('',(-2.1,1.675,6.E-02));+#255=LINE('',#254,#110);+#256=ORIENTED_EDGE('',*,*,#257,.T.);+#257=EDGE_CURVE('',#253,#258,#260,.T.);+#258=VERTEX_POINT('',#259);+#259=CARTESIAN_POINT('',(-2.1,1.775,6.E-02));+#260=LINE('',#254,#116);+#261=ORIENTED_EDGE('',*,*,#262,.F.);+#262=EDGE_CURVE('',#263,#258,#109,.T.);+#263=VERTEX_POINT('',#264);+#264=CARTESIAN_POINT('',(-2.9,1.775,6.E-02));+#265=ORIENTED_EDGE('',*,*,#266,.F.);+#266=EDGE_CURVE('',#267,#263,#269,.T.);+#267=VERTEX_POINT('',#268);+#268=CARTESIAN_POINT('',(-2.9,1.675,6.E-02));+#269=LINE('',#268,#116);+#270=ORIENTED_EDGE('',*,*,#271,.F.);+#271=EDGE_CURVE('',#272,#267,#274,.T.);+#272=VERTEX_POINT('',#273);+#273=CARTESIAN_POINT('',(-3.1,1.675,6.E-02));+#274=LINE('',#273,#110);+#275=ORIENTED_EDGE('',*,*,#276,.T.);+#276=EDGE_CURVE('',#272,#277,#279,.T.);+#277=VERTEX_POINT('',#278);+#278=CARTESIAN_POINT('',(-3.1,1.775,6.E-02));+#279=LINE('',#273,#116);+#280=ORIENTED_EDGE('',*,*,#281,.F.);+#281=EDGE_CURVE('',#282,#277,#109,.T.);+#282=VERTEX_POINT('',#283);+#283=CARTESIAN_POINT('',(-3.9,1.775,6.E-02));+#284=ORIENTED_EDGE('',*,*,#285,.F.);+#285=EDGE_CURVE('',#286,#282,#288,.T.);+#286=VERTEX_POINT('',#287);+#287=CARTESIAN_POINT('',(-3.9,1.675,6.E-02));+#288=LINE('',#287,#116);+#289=ORIENTED_EDGE('',*,*,#290,.F.);+#290=EDGE_CURVE('',#291,#286,#293,.T.);+#291=VERTEX_POINT('',#292);+#292=CARTESIAN_POINT('',(-4.1,1.675,6.E-02));+#293=LINE('',#292,#110);+#294=ORIENTED_EDGE('',*,*,#295,.T.);+#295=EDGE_CURVE('',#291,#296,#298,.T.);+#296=VERTEX_POINT('',#297);+#297=CARTESIAN_POINT('',(-4.1,1.775,6.E-02));+#298=LINE('',#292,#116);+#299=ORIENTED_EDGE('',*,*,#300,.F.);+#300=EDGE_CURVE('',#301,#296,#109,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(-4.9,1.775,6.E-02));+#303=ORIENTED_EDGE('',*,*,#304,.F.);+#304=EDGE_CURVE('',#305,#301,#307,.T.);+#305=VERTEX_POINT('',#306);+#306=CARTESIAN_POINT('',(-4.9,1.675,6.E-02));+#307=LINE('',#306,#116);+#308=ORIENTED_EDGE('',*,*,#309,.F.);+#309=EDGE_CURVE('',#310,#305,#312,.T.);+#310=VERTEX_POINT('',#311);+#311=CARTESIAN_POINT('',(-5.1,1.675,6.E-02));+#312=LINE('',#311,#110);+#313=ORIENTED_EDGE('',*,*,#314,.T.);+#314=EDGE_CURVE('',#310,#315,#317,.T.);+#315=VERTEX_POINT('',#316);+#316=CARTESIAN_POINT('',(-5.1,1.775,6.E-02));+#317=LINE('',#311,#116);+#318=ORIENTED_EDGE('',*,*,#319,.F.);+#319=EDGE_CURVE('',#22,#315,#109,.T.);+#320=ORIENTED_EDGE('',*,*,#21,.T.);+#321=ORIENTED_EDGE('',*,*,#322,.T.);+#322=EDGE_CURVE('',#24,#323,#325,.T.);+#323=VERTEX_POINT('',#324);+#324=CARTESIAN_POINT('',(-6.2,-0.975,6.E-02));+#325=LINE('',#25,#110);+#326=ORIENTED_EDGE('',*,*,#327,.T.);+#327=EDGE_CURVE('',#323,#328,#325,.T.);+#328=VERTEX_POINT('',#329);+#329=CARTESIAN_POINT('',(-6.,-0.975,6.E-02));+#330=ORIENTED_EDGE('',*,*,#331,.T.);+#331=EDGE_CURVE('',#328,#332,#334,.T.);+#332=VERTEX_POINT('',#333);+#333=CARTESIAN_POINT('',(-6.,-2.475,6.E-02));+#334=LINE('',#329,#335);+#335=VECTOR('',#336,1.);+#336=DIRECTION('',(0.,-1.,2.590520390792E-16));+#337=ORIENTED_EDGE('',*,*,#338,.T.);+#338=EDGE_CURVE('',#332,#339,#341,.T.);+#339=VERTEX_POINT('',#340);+#340=CARTESIAN_POINT('',(6.,-2.475,6.E-02));+#341=LINE('',#69,#110);+#342=ORIENTED_EDGE('',*,*,#343,.F.);+#343=EDGE_CURVE('',#344,#339,#346,.T.);+#344=VERTEX_POINT('',#345);+#345=CARTESIAN_POINT('',(6.,-0.975,6.E-02));+#346=LINE('',#345,#335);+#347=ORIENTED_EDGE('',*,*,#348,.T.);+#348=EDGE_CURVE('',#344,#349,#351,.T.);+#349=VERTEX_POINT('',#350);+#350=CARTESIAN_POINT('',(6.2,-0.975,6.E-02));+#351=LINE('',#345,#110);+#352=ORIENTED_EDGE('',*,*,#353,.T.);+#353=EDGE_CURVE('',#349,#102,#351,.T.);+#354=PLANE('',#355);+#355=AXIS2_PLACEMENT_3D('',#23,#35,#28);+#356=ADVANCED_FACE('',(#357),#371,.F.);+#357=FACE_BOUND('',#358,.F.);+#358=EDGE_LOOP('',(#359,#360,#365,#370));+#359=ORIENTED_EDGE('',*,*,#90,.F.);+#360=ORIENTED_EDGE('',*,*,#361,.T.);+#361=EDGE_CURVE('',#86,#362,#364,.T.);+#362=VERTEX_POINT('',#363);+#363=CARTESIAN_POINT('',(-6.2,-0.975,0.61));+#364=LINE('',#87,#110);+#365=ORIENTED_EDGE('',*,*,#366,.T.);+#366=EDGE_CURVE('',#362,#323,#367,.T.);+#367=LINE('',#363,#368);+#368=VECTOR('',#369,1.);+#369=DIRECTION('',(0.,0.,-1.));+#370=ORIENTED_EDGE('',*,*,#322,.F.);+#371=PLANE('',#372);+#372=AXIS2_PLACEMENT_3D('',#87,#76,#83);+#373=ADVANCED_FACE('',(#374),#386,.F.);+#374=FACE_BOUND('',#375,.F.);+#375=EDGE_LOOP('',(#376,#377,#382,#385));+#376=ORIENTED_EDGE('',*,*,#85,.F.);+#377=ORIENTED_EDGE('',*,*,#378,.T.);+#378=EDGE_CURVE('',#79,#379,#381,.T.);+#379=VERTEX_POINT('',#380);+#380=CARTESIAN_POINT('',(-6.2,-1.975,0.61));+#381=LINE('',#80,#110);+#382=ORIENTED_EDGE('',*,*,#383,.T.);+#383=EDGE_CURVE('',#379,#362,#384,.T.);+#384=LINE('',#380,#116);+#385=ORIENTED_EDGE('',*,*,#361,.F.);+#386=PLANE('',#387);+#387=AXIS2_PLACEMENT_3D('',#80,#35,#76);+#388=ADVANCED_FACE('',(#389),#401,.F.);+#389=FACE_BOUND('',#390,.F.);+#390=EDGE_LOOP('',(#391,#392,#397,#400));+#391=ORIENTED_EDGE('',*,*,#78,.F.);+#392=ORIENTED_EDGE('',*,*,#393,.T.);+#393=EDGE_CURVE('',#72,#394,#396,.T.);+#394=VERTEX_POINT('',#395);+#395=CARTESIAN_POINT('',(-6.2,-1.975,1.26));+#396=LINE('',#73,#110);+#397=ORIENTED_EDGE('',*,*,#398,.T.);+#398=EDGE_CURVE('',#394,#379,#399,.T.);+#399=LINE('',#395,#368);+#400=ORIENTED_EDGE('',*,*,#378,.F.);+#401=PLANE('',#402);+#402=AXIS2_PLACEMENT_3D('',#73,#76,#83);+#403=ADVANCED_FACE('',(#404),#416,.F.);+#404=FACE_BOUND('',#405,.F.);+#405=EDGE_LOOP('',(#406,#407,#412,#415));+#406=ORIENTED_EDGE('',*,*,#71,.F.);+#407=ORIENTED_EDGE('',*,*,#408,.T.);+#408=EDGE_CURVE('',#66,#409,#411,.T.);+#409=VERTEX_POINT('',#410);+#410=CARTESIAN_POINT('',(-6.2,-2.475,1.26));+#411=LINE('',#67,#110);+#412=ORIENTED_EDGE('',*,*,#413,.T.);+#413=EDGE_CURVE('',#409,#394,#414,.T.);+#414=LINE('',#410,#116);+#415=ORIENTED_EDGE('',*,*,#393,.F.);+#416=PLANE('',#417);+#417=AXIS2_PLACEMENT_3D('',#67,#35,#76);+#418=ADVANCED_FACE('',(#419,#451),#511,.T.);+#419=FACE_BOUND('',#420,.T.);+#420=EDGE_LOOP('',(#64,#407,#421,#425,#337,#428,#433,#438,#442,#448));+#421=ORIENTED_EDGE('',*,*,#422,.T.);+#422=EDGE_CURVE('',#409,#423,#411,.T.);+#423=VERTEX_POINT('',#424);+#424=CARTESIAN_POINT('',(-6.,-2.475,1.26));+#425=ORIENTED_EDGE('',*,*,#426,.F.);+#426=EDGE_CURVE('',#332,#423,#427,.T.);+#427=LINE('',#333,#34);+#428=ORIENTED_EDGE('',*,*,#429,.T.);+#429=EDGE_CURVE('',#339,#430,#432,.T.);+#430=VERTEX_POINT('',#431);+#431=CARTESIAN_POINT('',(6.,-2.475,1.26));+#432=LINE('',#340,#34);+#433=ORIENTED_EDGE('',*,*,#434,.T.);+#434=EDGE_CURVE('',#430,#435,#437,.T.);+#435=VERTEX_POINT('',#436);+#436=CARTESIAN_POINT('',(6.2,-2.475,1.26));+#437=LINE('',#431,#110);+#438=ORIENTED_EDGE('',*,*,#439,.T.);+#439=EDGE_CURVE('',#435,#440,#437,.T.);+#440=VERTEX_POINT('',#441);+#441=CARTESIAN_POINT('',(6.5,-2.475,1.26));+#442=ORIENTED_EDGE('',*,*,#443,.T.);+#443=EDGE_CURVE('',#440,#444,#446,.T.);+#444=VERTEX_POINT('',#445);+#445=CARTESIAN_POINT('',(6.5,-2.475,2.96));+#446=LINE('',#447,#34);+#447=CARTESIAN_POINT('',(6.5,-2.475,6.E-02));+#448=ORIENTED_EDGE('',*,*,#449,.F.);+#449=EDGE_CURVE('',#60,#444,#450,.T.);+#450=LINE('',#61,#110);+#451=FACE_BOUND('',#452,.T.);+#452=EDGE_LOOP('',(#453,#460,#465,#471,#476,#481,#489,#492,#497,#501,#504,#509));+#453=ORIENTED_EDGE('',*,*,#454,.F.);+#454=EDGE_CURVE('',#455,#457,#459,.T.);+#455=VERTEX_POINT('',#456);+#456=CARTESIAN_POINT('',(5.7,-2.475,0.46));+#457=VERTEX_POINT('',#458);+#458=CARTESIAN_POINT('',(5.7,-2.475,1.46));+#459=LINE('',#456,#34);+#460=ORIENTED_EDGE('',*,*,#461,.F.);+#461=EDGE_CURVE('',#462,#455,#464,.T.);+#462=VERTEX_POINT('',#463);+#463=CARTESIAN_POINT('',(-5.7,-2.475,0.46));+#464=LINE('',#463,#110);+#465=ORIENTED_EDGE('',*,*,#466,.F.);+#466=EDGE_CURVE('',#467,#462,#469,.T.);+#467=VERTEX_POINT('',#468);+#468=CARTESIAN_POINT('',(-5.7,-2.475,1.46));+#469=LINE('',#470,#82);+#470=CARTESIAN_POINT('',(-5.7,-2.475,2.56));+#471=ORIENTED_EDGE('',*,*,#472,.F.);+#472=EDGE_CURVE('',#473,#467,#475,.T.);+#473=VERTEX_POINT('',#474);+#474=CARTESIAN_POINT('',(-6.05,-2.475,1.46));+#475=LINE('',#474,#110);+#476=ORIENTED_EDGE('',*,*,#477,.F.);+#477=EDGE_CURVE('',#478,#473,#480,.T.);+#478=VERTEX_POINT('',#479);+#479=CARTESIAN_POINT('',(-6.05,-2.475,2.06));+#480=LINE('',#479,#82);+#481=ORIENTED_EDGE('',*,*,#482,.F.);+#482=EDGE_CURVE('',#483,#478,#485,.T.);+#483=VERTEX_POINT('',#484);+#484=CARTESIAN_POINT('',(-5.7,-2.475,2.06));+#485=LINE('',#486,#487);+#486=CARTESIAN_POINT('',(6.05,-2.475,2.06));+#487=VECTOR('',#488,1.);+#488=DIRECTION('',(-1.,0.,0.));+#489=ORIENTED_EDGE('',*,*,#490,.F.);+#490=EDGE_CURVE('',#491,#483,#469,.T.);+#491=VERTEX_POINT('',#470);+#492=ORIENTED_EDGE('',*,*,#493,.F.);+#493=EDGE_CURVE('',#494,#491,#496,.T.);+#494=VERTEX_POINT('',#495);+#495=CARTESIAN_POINT('',(5.7,-2.475,2.56));+#496=LINE('',#495,#487);+#497=ORIENTED_EDGE('',*,*,#498,.F.);+#498=EDGE_CURVE('',#499,#494,#459,.T.);+#499=VERTEX_POINT('',#500);+#500=CARTESIAN_POINT('',(5.7,-2.475,2.06));+#501=ORIENTED_EDGE('',*,*,#502,.F.);+#502=EDGE_CURVE('',#503,#499,#485,.T.);+#503=VERTEX_POINT('',#486);+#504=ORIENTED_EDGE('',*,*,#505,.F.);+#505=EDGE_CURVE('',#506,#503,#508,.T.);+#506=VERTEX_POINT('',#507);+#507=CARTESIAN_POINT('',(6.05,-2.475,1.46));+#508=LINE('',#507,#34);+#509=ORIENTED_EDGE('',*,*,#510,.F.);+#510=EDGE_CURVE('',#457,#506,#475,.T.);+#511=PLANE('',#512);+#512=AXIS2_PLACEMENT_3D('',#69,#28,#94);+#513=ADVANCED_FACE('',(#514),#546,.T.);+#514=FACE_BOUND('',#515,.T.);+#515=EDGE_LOOP('',(#516,#523,#528,#58,#531,#532,#538,#543));+#516=ORIENTED_EDGE('',*,*,#517,.F.);+#517=EDGE_CURVE('',#518,#520,#522,.T.);+#518=VERTEX_POINT('',#519);+#519=CARTESIAN_POINT('',(-6.,1.775,2.96));+#520=VERTEX_POINT('',#521);+#521=CARTESIAN_POINT('',(6.,1.775,2.96));+#522=LINE('',#63,#110);+#523=ORIENTED_EDGE('',*,*,#524,.F.);+#524=EDGE_CURVE('',#525,#518,#527,.T.);+#525=VERTEX_POINT('',#526);+#526=CARTESIAN_POINT('',(-6.,0.286,2.96));+#527=LINE('',#526,#75);+#528=ORIENTED_EDGE('',*,*,#529,.F.);+#529=EDGE_CURVE('',#53,#525,#530,.T.);+#530=LINE('',#54,#110);+#531=ORIENTED_EDGE('',*,*,#449,.T.);+#532=ORIENTED_EDGE('',*,*,#533,.F.);+#533=EDGE_CURVE('',#534,#444,#536,.T.);+#534=VERTEX_POINT('',#535);+#535=CARTESIAN_POINT('',(6.5,0.286,2.96));+#536=LINE('',#537,#27);+#537=CARTESIAN_POINT('',(6.5,1.775,2.96));+#538=ORIENTED_EDGE('',*,*,#539,.F.);+#539=EDGE_CURVE('',#540,#534,#542,.T.);+#540=VERTEX_POINT('',#541);+#541=CARTESIAN_POINT('',(6.,0.286,2.96));+#542=LINE('',#541,#110);+#543=ORIENTED_EDGE('',*,*,#544,.T.);+#544=EDGE_CURVE('',#540,#520,#545,.T.);+#545=LINE('',#541,#75);+#546=PLANE('',#547);+#547=AXIS2_PLACEMENT_3D('',#63,#35,#28);+#548=ADVANCED_FACE('',(#549),#560,.F.);+#549=FACE_BOUND('',#550,.F.);+#550=EDGE_LOOP('',(#551,#556,#528,#559));+#551=ORIENTED_EDGE('',*,*,#552,.T.);+#552=EDGE_CURVE('',#48,#553,#555,.T.);+#553=VERTEX_POINT('',#554);+#554=CARTESIAN_POINT('',(-6.,0.575,2.46));+#555=LINE('',#49,#110);+#556=ORIENTED_EDGE('',*,*,#557,.T.);+#557=EDGE_CURVE('',#553,#525,#558,.T.);+#558=LINE('',#554,#56);+#559=ORIENTED_EDGE('',*,*,#52,.F.);+#560=PLANE('',#561);+#561=AXIS2_PLACEMENT_3D('',#49,#562,#57);+#562=DIRECTION('',(0.,-0.865781720524,-0.500421834463));+#563=ADVANCED_FACE('',(#564),#576,.F.);+#564=FACE_BOUND('',#565,.F.);+#565=EDGE_LOOP('',(#566,#571,#574,#575));+#566=ORIENTED_EDGE('',*,*,#567,.T.);+#567=EDGE_CURVE('',#43,#568,#570,.T.);+#568=VERTEX_POINT('',#569);+#569=CARTESIAN_POINT('',(-6.,1.225,2.46));+#570=LINE('',#44,#110);+#571=ORIENTED_EDGE('',*,*,#572,.T.);+#572=EDGE_CURVE('',#568,#553,#573,.T.);+#573=LINE('',#569,#27);+#574=ORIENTED_EDGE('',*,*,#552,.F.);+#575=ORIENTED_EDGE('',*,*,#47,.F.);+#576=PLANE('',#577);+#577=AXIS2_PLACEMENT_3D('',#44,#83,#28);+#578=ADVANCED_FACE('',(#579),#591,.F.);+#579=FACE_BOUND('',#580,.F.);+#580=EDGE_LOOP('',(#581,#586,#589,#590));+#581=ORIENTED_EDGE('',*,*,#582,.T.);+#582=EDGE_CURVE('',#38,#583,#585,.T.);+#583=VERTEX_POINT('',#584);+#584=CARTESIAN_POINT('',(-6.,1.225,1.46));+#585=LINE('',#39,#110);+#586=ORIENTED_EDGE('',*,*,#587,.T.);+#587=EDGE_CURVE('',#583,#568,#588,.T.);+#588=LINE('',#584,#34);+#589=ORIENTED_EDGE('',*,*,#567,.F.);+#590=ORIENTED_EDGE('',*,*,#42,.F.);+#591=PLANE('',#592);+#592=AXIS2_PLACEMENT_3D('',#39,#28,#35);+#593=ADVANCED_FACE('',(#594),#606,.F.);+#594=FACE_BOUND('',#595,.F.);+#595=EDGE_LOOP('',(#596,#601,#604,#605));+#596=ORIENTED_EDGE('',*,*,#597,.T.);+#597=EDGE_CURVE('',#31,#598,#600,.T.);+#598=VERTEX_POINT('',#599);+#599=CARTESIAN_POINT('',(-6.,1.775,1.46));+#600=LINE('',#32,#110);+#601=ORIENTED_EDGE('',*,*,#602,.T.);+#602=EDGE_CURVE('',#598,#583,#603,.T.);+#603=LINE('',#599,#27);+#604=ORIENTED_EDGE('',*,*,#582,.F.);+#605=ORIENTED_EDGE('',*,*,#37,.F.);+#606=PLANE('',#607);+#607=AXIS2_PLACEMENT_3D('',#32,#83,#28);+#608=ADVANCED_FACE('',(#609),#785,.F.);+#609=FACE_BOUND('',#610,.F.);+#610=EDGE_LOOP('',(#611,#612,#613,#619,#624,#627,#628,#633,#638,#641,#642,#647,#652,#655,#656,#661,#666,#669,#670,#675,#680,#683,#684,#689,#694,#697,#698,#703,#708,#711,#712,#717,#722,#725,#726,#731,#736,#739,#740,#745,#750,#753,#754,#759,#764,#767,#768,#773,#778,#516,#781,#784));+#611=ORIENTED_EDGE('',*,*,#30,.F.);+#612=ORIENTED_EDGE('',*,*,#319,.T.);+#613=ORIENTED_EDGE('',*,*,#614,.T.);+#614=EDGE_CURVE('',#315,#615,#617,.T.);+#615=VERTEX_POINT('',#616);+#616=CARTESIAN_POINT('',(-5.1,1.775,0.2));+#617=LINE('',#316,#618);+#618=VECTOR('',#13,1.);+#619=ORIENTED_EDGE('',*,*,#620,.T.);+#620=EDGE_CURVE('',#615,#621,#623,.T.);+#621=VERTEX_POINT('',#622);+#622=CARTESIAN_POINT('',(-4.9,1.775,0.2));+#623=LINE('',#616,#110);+#624=ORIENTED_EDGE('',*,*,#625,.F.);+#625=EDGE_CURVE('',#301,#621,#626,.T.);+#626=LINE('',#302,#618);+#627=ORIENTED_EDGE('',*,*,#300,.T.);+#628=ORIENTED_EDGE('',*,*,#629,.T.);+#629=EDGE_CURVE('',#296,#630,#632,.T.);+#630=VERTEX_POINT('',#631);+#631=CARTESIAN_POINT('',(-4.1,1.775,0.2));+#632=LINE('',#297,#618);+#633=ORIENTED_EDGE('',*,*,#634,.T.);+#634=EDGE_CURVE('',#630,#635,#637,.T.);+#635=VERTEX_POINT('',#636);+#636=CARTESIAN_POINT('',(-3.9,1.775,0.2));+#637=LINE('',#631,#110);+#638=ORIENTED_EDGE('',*,*,#639,.F.);+#639=EDGE_CURVE('',#282,#635,#640,.T.);+#640=LINE('',#283,#618);+#641=ORIENTED_EDGE('',*,*,#281,.T.);+#642=ORIENTED_EDGE('',*,*,#643,.T.);+#643=EDGE_CURVE('',#277,#644,#646,.T.);+#644=VERTEX_POINT('',#645);+#645=CARTESIAN_POINT('',(-3.1,1.775,0.2));+#646=LINE('',#278,#618);+#647=ORIENTED_EDGE('',*,*,#648,.T.);+#648=EDGE_CURVE('',#644,#649,#651,.T.);+#649=VERTEX_POINT('',#650);+#650=CARTESIAN_POINT('',(-2.9,1.775,0.2));+#651=LINE('',#645,#110);+#652=ORIENTED_EDGE('',*,*,#653,.F.);+#653=EDGE_CURVE('',#263,#649,#654,.T.);+#654=LINE('',#264,#618);+#655=ORIENTED_EDGE('',*,*,#262,.T.);+#656=ORIENTED_EDGE('',*,*,#657,.T.);+#657=EDGE_CURVE('',#258,#658,#660,.T.);+#658=VERTEX_POINT('',#659);+#659=CARTESIAN_POINT('',(-2.1,1.775,0.2));+#660=LINE('',#259,#618);+#661=ORIENTED_EDGE('',*,*,#662,.T.);+#662=EDGE_CURVE('',#658,#663,#665,.T.);+#663=VERTEX_POINT('',#664);+#664=CARTESIAN_POINT('',(-1.9,1.775,0.2));+#665=LINE('',#659,#110);+#666=ORIENTED_EDGE('',*,*,#667,.F.);+#667=EDGE_CURVE('',#244,#663,#668,.T.);+#668=LINE('',#245,#618);+#669=ORIENTED_EDGE('',*,*,#243,.T.);+#670=ORIENTED_EDGE('',*,*,#671,.T.);+#671=EDGE_CURVE('',#239,#672,#674,.T.);+#672=VERTEX_POINT('',#673);+#673=CARTESIAN_POINT('',(-1.1,1.775,0.2));+#674=LINE('',#240,#618);+#675=ORIENTED_EDGE('',*,*,#676,.T.);+#676=EDGE_CURVE('',#672,#677,#679,.T.);+#677=VERTEX_POINT('',#678);+#678=CARTESIAN_POINT('',(-0.9,1.775,0.2));+#679=LINE('',#673,#110);+#680=ORIENTED_EDGE('',*,*,#681,.F.);+#681=EDGE_CURVE('',#225,#677,#682,.T.);+#682=LINE('',#226,#618);+#683=ORIENTED_EDGE('',*,*,#224,.T.);+#684=ORIENTED_EDGE('',*,*,#685,.T.);+#685=EDGE_CURVE('',#220,#686,#688,.T.);+#686=VERTEX_POINT('',#687);+#687=CARTESIAN_POINT('',(-1.E-01,1.775,0.2));+#688=LINE('',#221,#618);+#689=ORIENTED_EDGE('',*,*,#690,.T.);+#690=EDGE_CURVE('',#686,#691,#693,.T.);+#691=VERTEX_POINT('',#692);+#692=CARTESIAN_POINT('',(0.1,1.775,0.2));+#693=LINE('',#687,#110);+#694=ORIENTED_EDGE('',*,*,#695,.F.);+#695=EDGE_CURVE('',#206,#691,#696,.T.);+#696=LINE('',#207,#618);+#697=ORIENTED_EDGE('',*,*,#205,.T.);+#698=ORIENTED_EDGE('',*,*,#699,.T.);+#699=EDGE_CURVE('',#201,#700,#702,.T.);+#700=VERTEX_POINT('',#701);+#701=CARTESIAN_POINT('',(0.9,1.775,0.2));+#702=LINE('',#202,#618);+#703=ORIENTED_EDGE('',*,*,#704,.T.);+#704=EDGE_CURVE('',#700,#705,#707,.T.);+#705=VERTEX_POINT('',#706);+#706=CARTESIAN_POINT('',(1.1,1.775,0.2));+#707=LINE('',#701,#110);+#708=ORIENTED_EDGE('',*,*,#709,.F.);+#709=EDGE_CURVE('',#187,#705,#710,.T.);+#710=LINE('',#188,#618);+#711=ORIENTED_EDGE('',*,*,#186,.T.);+#712=ORIENTED_EDGE('',*,*,#713,.T.);+#713=EDGE_CURVE('',#182,#714,#716,.T.);+#714=VERTEX_POINT('',#715);+#715=CARTESIAN_POINT('',(1.9,1.775,0.2));+#716=LINE('',#183,#618);+#717=ORIENTED_EDGE('',*,*,#718,.T.);+#718=EDGE_CURVE('',#714,#719,#721,.T.);+#719=VERTEX_POINT('',#720);+#720=CARTESIAN_POINT('',(2.1,1.775,0.2));+#721=LINE('',#715,#110);+#722=ORIENTED_EDGE('',*,*,#723,.F.);+#723=EDGE_CURVE('',#168,#719,#724,.T.);+#724=LINE('',#169,#618);+#725=ORIENTED_EDGE('',*,*,#167,.T.);+#726=ORIENTED_EDGE('',*,*,#727,.T.);+#727=EDGE_CURVE('',#163,#728,#730,.T.);+#728=VERTEX_POINT('',#729);+#729=CARTESIAN_POINT('',(2.9,1.775,0.2));+#730=LINE('',#164,#618);+#731=ORIENTED_EDGE('',*,*,#732,.T.);+#732=EDGE_CURVE('',#728,#733,#735,.T.);+#733=VERTEX_POINT('',#734);+#734=CARTESIAN_POINT('',(3.1,1.775,0.2));+#735=LINE('',#729,#110);+#736=ORIENTED_EDGE('',*,*,#737,.F.);+#737=EDGE_CURVE('',#149,#733,#738,.T.);+#738=LINE('',#150,#618);+#739=ORIENTED_EDGE('',*,*,#148,.T.);+#740=ORIENTED_EDGE('',*,*,#741,.T.);+#741=EDGE_CURVE('',#144,#742,#744,.T.);+#742=VERTEX_POINT('',#743);+#743=CARTESIAN_POINT('',(3.9,1.775,0.2));+#744=LINE('',#145,#618);+#745=ORIENTED_EDGE('',*,*,#746,.T.);+#746=EDGE_CURVE('',#742,#747,#749,.T.);+#747=VERTEX_POINT('',#748);+#748=CARTESIAN_POINT('',(4.1,1.775,0.2));+#749=LINE('',#743,#110);+#750=ORIENTED_EDGE('',*,*,#751,.F.);+#751=EDGE_CURVE('',#130,#747,#752,.T.);+#752=LINE('',#131,#618);+#753=ORIENTED_EDGE('',*,*,#129,.T.);+#754=ORIENTED_EDGE('',*,*,#755,.T.);+#755=EDGE_CURVE('',#125,#756,#758,.T.);+#756=VERTEX_POINT('',#757);+#757=CARTESIAN_POINT('',(4.9,1.775,0.2));+#758=LINE('',#126,#618);+#759=ORIENTED_EDGE('',*,*,#760,.T.);+#760=EDGE_CURVE('',#756,#761,#763,.T.);+#761=VERTEX_POINT('',#762);+#762=CARTESIAN_POINT('',(5.1,1.775,0.2));+#763=LINE('',#757,#110);+#764=ORIENTED_EDGE('',*,*,#765,.F.);+#765=EDGE_CURVE('',#107,#761,#766,.T.);+#766=LINE('',#108,#618);+#767=ORIENTED_EDGE('',*,*,#106,.T.);+#768=ORIENTED_EDGE('',*,*,#769,.T.);+#769=EDGE_CURVE('',#100,#770,#772,.T.);+#770=VERTEX_POINT('',#771);+#771=CARTESIAN_POINT('',(6.5,1.775,1.46));+#772=LINE('',#101,#34);+#773=ORIENTED_EDGE('',*,*,#774,.F.);+#774=EDGE_CURVE('',#775,#770,#777,.T.);+#775=VERTEX_POINT('',#776);+#776=CARTESIAN_POINT('',(6.,1.775,1.46));+#777=LINE('',#776,#110);+#778=ORIENTED_EDGE('',*,*,#779,.F.);+#779=EDGE_CURVE('',#520,#775,#780,.T.);+#780=LINE('',#521,#82);+#781=ORIENTED_EDGE('',*,*,#782,.T.);+#782=EDGE_CURVE('',#518,#598,#783,.T.);+#783=LINE('',#519,#82);+#784=ORIENTED_EDGE('',*,*,#597,.F.);+#785=PLANE('',#786);+#786=AXIS2_PLACEMENT_3D('',#23,#28,#94);+#787=ADVANCED_FACE('',(#788),#828,.T.);+#788=FACE_BOUND('',#789,.T.);+#789=EDGE_LOOP('',(#98,#768,#790,#795,#800,#805,#808,#809,#810,#815,#820,#825));+#790=ORIENTED_EDGE('',*,*,#791,.T.);+#791=EDGE_CURVE('',#770,#792,#794,.T.);+#792=VERTEX_POINT('',#793);+#793=CARTESIAN_POINT('',(6.5,1.225,1.46));+#794=LINE('',#771,#27);+#795=ORIENTED_EDGE('',*,*,#796,.T.);+#796=EDGE_CURVE('',#792,#797,#799,.T.);+#797=VERTEX_POINT('',#798);+#798=CARTESIAN_POINT('',(6.5,1.225,2.46));+#799=LINE('',#793,#34);+#800=ORIENTED_EDGE('',*,*,#801,.T.);+#801=EDGE_CURVE('',#797,#802,#804,.T.);+#802=VERTEX_POINT('',#803);+#803=CARTESIAN_POINT('',(6.5,0.575,2.46));+#804=LINE('',#798,#27);+#805=ORIENTED_EDGE('',*,*,#806,.T.);+#806=EDGE_CURVE('',#802,#534,#807,.T.);+#807=LINE('',#803,#56);+#808=ORIENTED_EDGE('',*,*,#533,.T.);+#809=ORIENTED_EDGE('',*,*,#443,.F.);+#810=ORIENTED_EDGE('',*,*,#811,.T.);+#811=EDGE_CURVE('',#440,#812,#814,.T.);+#812=VERTEX_POINT('',#813);+#813=CARTESIAN_POINT('',(6.5,-1.975,1.26));+#814=LINE('',#441,#75);+#815=ORIENTED_EDGE('',*,*,#816,.T.);+#816=EDGE_CURVE('',#812,#817,#819,.T.);+#817=VERTEX_POINT('',#818);+#818=CARTESIAN_POINT('',(6.5,-1.975,0.61));+#819=LINE('',#813,#82);+#820=ORIENTED_EDGE('',*,*,#821,.T.);+#821=EDGE_CURVE('',#817,#822,#824,.T.);+#822=VERTEX_POINT('',#823);+#823=CARTESIAN_POINT('',(6.5,-0.975,0.61));+#824=LINE('',#818,#75);+#825=ORIENTED_EDGE('',*,*,#826,.T.);+#826=EDGE_CURVE('',#822,#102,#827,.T.);+#827=LINE('',#823,#82);+#828=PLANE('',#829);+#829=AXIS2_PLACEMENT_3D('',#101,#94,#28);+#830=ADVANCED_FACE('',(#831),#843,.F.);+#831=FACE_BOUND('',#832,.F.);+#832=EDGE_LOOP('',(#833,#838,#825,#842));+#833=ORIENTED_EDGE('',*,*,#834,.F.);+#834=EDGE_CURVE('',#835,#349,#837,.T.);+#835=VERTEX_POINT('',#836);+#836=CARTESIAN_POINT('',(6.2,-0.975,0.61));+#837=LINE('',#836,#368);+#838=ORIENTED_EDGE('',*,*,#839,.T.);+#839=EDGE_CURVE('',#835,#822,#840,.T.);+#840=LINE('',#841,#110);+#841=CARTESIAN_POINT('',(6.,-0.975,0.61));+#842=ORIENTED_EDGE('',*,*,#353,.F.);+#843=PLANE('',#844);+#844=AXIS2_PLACEMENT_3D('',#841,#76,#83);+#845=ADVANCED_FACE('',(#846),#860,.T.);+#846=FACE_BOUND('',#847,.T.);+#847=EDGE_LOOP('',(#848,#347,#853,#857));+#848=ORIENTED_EDGE('',*,*,#849,.F.);+#849=EDGE_CURVE('',#344,#850,#852,.T.);+#850=VERTEX_POINT('',#851);+#851=CARTESIAN_POINT('',(6.,-0.975,1.E-02));+#852=LINE('',#841,#368);+#853=ORIENTED_EDGE('',*,*,#854,.T.);+#854=EDGE_CURVE('',#349,#855,#837,.T.);+#855=VERTEX_POINT('',#856);+#856=CARTESIAN_POINT('',(6.2,-0.975,1.E-02));+#857=ORIENTED_EDGE('',*,*,#858,.F.);+#858=EDGE_CURVE('',#850,#855,#859,.T.);+#859=LINE('',#851,#110);+#860=PLANE('',#861);+#861=AXIS2_PLACEMENT_3D('',#841,#117,#369);+#862=ADVANCED_FACE('',(#863),#876,.T.);+#863=FACE_BOUND('',#864,.T.);+#864=EDGE_LOOP('',(#865,#872,#342,#875));+#865=ORIENTED_EDGE('',*,*,#866,.T.);+#866=EDGE_CURVE('',#850,#867,#869,.T.);+#867=VERTEX_POINT('',#868);+#868=CARTESIAN_POINT('',(6.,-2.475,1.E-02));+#869=LINE('',#851,#870);+#870=VECTOR('',#871,1.);+#871=DIRECTION('',(0.,-1.,-5.782411586589E-18));+#872=ORIENTED_EDGE('',*,*,#873,.T.);+#873=EDGE_CURVE('',#867,#339,#874,.T.);+#874=LINE('',#868,#618);+#875=ORIENTED_EDGE('',*,*,#849,.T.);+#876=PLANE('',#877);+#877=AXIS2_PLACEMENT_3D('',#878,#879,#369);+#878=CARTESIAN_POINT('',(6.,-1.843181818182,0.516818181818));+#879=DIRECTION('',(-1.,-0.,-0.));+#880=ADVANCED_FACE('',(#881),#898,.F.);+#881=FACE_BOUND('',#882,.F.);+#882=EDGE_LOOP('',(#883,#890,#893,#894));+#883=ORIENTED_EDGE('',*,*,#884,.T.);+#884=EDGE_CURVE('',#885,#887,#889,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(-6.,-0.975,1.E-02));+#887=VERTEX_POINT('',#888);+#888=CARTESIAN_POINT('',(-6.,-2.475,1.E-02));+#889=LINE('',#886,#870);+#890=ORIENTED_EDGE('',*,*,#891,.T.);+#891=EDGE_CURVE('',#887,#332,#892,.T.);+#892=LINE('',#888,#618);+#893=ORIENTED_EDGE('',*,*,#331,.F.);+#894=ORIENTED_EDGE('',*,*,#895,.T.);+#895=EDGE_CURVE('',#328,#885,#896,.T.);+#896=LINE('',#897,#368);+#897=CARTESIAN_POINT('',(-6.,-0.975,0.61));+#898=PLANE('',#899);+#899=AXIS2_PLACEMENT_3D('',#900,#879,#369);+#900=CARTESIAN_POINT('',(-6.,-1.843181818182,0.516818181818));+#901=ADVANCED_FACE('',(#902),#911,.T.);+#902=FACE_BOUND('',#903,.T.);+#903=EDGE_LOOP('',(#904,#326,#894,#908));+#904=ORIENTED_EDGE('',*,*,#905,.F.);+#905=EDGE_CURVE('',#323,#906,#367,.T.);+#906=VERTEX_POINT('',#907);+#907=CARTESIAN_POINT('',(-6.2,-0.975,1.E-02));+#908=ORIENTED_EDGE('',*,*,#909,.F.);+#909=EDGE_CURVE('',#906,#885,#910,.T.);+#910=LINE('',#907,#110);+#911=PLANE('',#912);+#912=AXIS2_PLACEMENT_3D('',#363,#117,#369);+#913=ADVANCED_FACE('',(#914),#936,.T.);+#914=FACE_BOUND('',#915,.T.);+#915=EDGE_LOOP('',(#916,#313,#613,#921,#926,#931));+#916=ORIENTED_EDGE('',*,*,#917,.T.);+#917=EDGE_CURVE('',#918,#310,#920,.T.);+#918=VERTEX_POINT('',#919);+#919=CARTESIAN_POINT('',(-5.1,1.675,0.));+#920=LINE('',#919,#618);+#921=ORIENTED_EDGE('',*,*,#922,.T.);+#922=EDGE_CURVE('',#615,#923,#925,.T.);+#923=VERTEX_POINT('',#924);+#924=CARTESIAN_POINT('',(-5.1,2.475,0.2));+#925=LINE('',#616,#116);+#926=ORIENTED_EDGE('',*,*,#927,.T.);+#927=EDGE_CURVE('',#923,#928,#930,.T.);+#928=VERTEX_POINT('',#929);+#929=CARTESIAN_POINT('',(-5.1,2.475,0.));+#930=LINE('',#924,#368);+#931=ORIENTED_EDGE('',*,*,#932,.T.);+#932=EDGE_CURVE('',#928,#918,#933,.T.);+#933=LINE('',#929,#934);+#934=VECTOR('',#935,1.);+#935=DIRECTION('',(0.,-1.,0.));+#936=PLANE('',#937);+#937=AXIS2_PLACEMENT_3D('',#938,#879,#369);+#938=CARTESIAN_POINT('',(-5.1,2.082,9.3E-02));+#939=ADVANCED_FACE('',(#940),#951,.T.);+#940=FACE_BOUND('',#941,.T.);+#941=EDGE_LOOP('',(#942,#947,#308,#950));+#942=ORIENTED_EDGE('',*,*,#943,.T.);+#943=EDGE_CURVE('',#918,#944,#946,.T.);+#944=VERTEX_POINT('',#945);+#945=CARTESIAN_POINT('',(-4.9,1.675,0.));+#946=LINE('',#919,#110);+#947=ORIENTED_EDGE('',*,*,#948,.T.);+#948=EDGE_CURVE('',#944,#305,#949,.T.);+#949=LINE('',#945,#618);+#950=ORIENTED_EDGE('',*,*,#917,.F.);+#951=PLANE('',#952);+#952=AXIS2_PLACEMENT_3D('',#919,#935,#13);+#953=ADVANCED_FACE('',(#954),#971,.F.);+#954=FACE_BOUND('',#955,.F.);+#955=EDGE_LOOP('',(#947,#956,#957,#958,#963,#968));+#956=ORIENTED_EDGE('',*,*,#304,.T.);+#957=ORIENTED_EDGE('',*,*,#625,.T.);+#958=ORIENTED_EDGE('',*,*,#959,.T.);+#959=EDGE_CURVE('',#621,#960,#962,.T.);+#960=VERTEX_POINT('',#961);+#961=CARTESIAN_POINT('',(-4.9,2.475,0.2));+#962=LINE('',#622,#116);+#963=ORIENTED_EDGE('',*,*,#964,.T.);+#964=EDGE_CURVE('',#960,#965,#967,.T.);+#965=VERTEX_POINT('',#966);+#966=CARTESIAN_POINT('',(-4.9,2.475,0.));+#967=LINE('',#961,#368);+#968=ORIENTED_EDGE('',*,*,#969,.T.);+#969=EDGE_CURVE('',#965,#944,#970,.T.);+#970=LINE('',#966,#934);+#971=PLANE('',#972);+#972=AXIS2_PLACEMENT_3D('',#973,#879,#369);+#973=CARTESIAN_POINT('',(-4.9,2.082,9.3E-02));+#974=ADVANCED_FACE('',(#975),#995,.T.);+#975=FACE_BOUND('',#976,.T.);+#976=EDGE_LOOP('',(#977,#294,#628,#982,#987,#992));+#977=ORIENTED_EDGE('',*,*,#978,.T.);+#978=EDGE_CURVE('',#979,#291,#981,.T.);+#979=VERTEX_POINT('',#980);+#980=CARTESIAN_POINT('',(-4.1,1.675,0.));+#981=LINE('',#980,#618);+#982=ORIENTED_EDGE('',*,*,#983,.T.);+#983=EDGE_CURVE('',#630,#984,#986,.T.);+#984=VERTEX_POINT('',#985);+#985=CARTESIAN_POINT('',(-4.1,2.475,0.2));+#986=LINE('',#631,#116);+#987=ORIENTED_EDGE('',*,*,#988,.T.);+#988=EDGE_CURVE('',#984,#989,#991,.T.);+#989=VERTEX_POINT('',#990);+#990=CARTESIAN_POINT('',(-4.1,2.475,0.));+#991=LINE('',#985,#368);+#992=ORIENTED_EDGE('',*,*,#993,.T.);+#993=EDGE_CURVE('',#989,#979,#994,.T.);+#994=LINE('',#990,#934);+#995=PLANE('',#996);+#996=AXIS2_PLACEMENT_3D('',#997,#879,#369);+#997=CARTESIAN_POINT('',(-4.1,2.082,9.3E-02));+#998=ADVANCED_FACE('',(#999),#1010,.T.);+#999=FACE_BOUND('',#1000,.T.);+#1000=EDGE_LOOP('',(#1001,#1006,#289,#1009));+#1001=ORIENTED_EDGE('',*,*,#1002,.T.);+#1002=EDGE_CURVE('',#979,#1003,#1005,.T.);+#1003=VERTEX_POINT('',#1004);+#1004=CARTESIAN_POINT('',(-3.9,1.675,0.));+#1005=LINE('',#980,#110);+#1006=ORIENTED_EDGE('',*,*,#1007,.T.);+#1007=EDGE_CURVE('',#1003,#286,#1008,.T.);+#1008=LINE('',#1004,#618);+#1009=ORIENTED_EDGE('',*,*,#978,.F.);+#1010=PLANE('',#1011);+#1011=AXIS2_PLACEMENT_3D('',#980,#935,#13);+#1012=ADVANCED_FACE('',(#1013),#1030,.F.);+#1013=FACE_BOUND('',#1014,.F.);+#1014=EDGE_LOOP('',(#1006,#1015,#1016,#1017,#1022,#1027));+#1015=ORIENTED_EDGE('',*,*,#285,.T.);+#1016=ORIENTED_EDGE('',*,*,#639,.T.);+#1017=ORIENTED_EDGE('',*,*,#1018,.T.);+#1018=EDGE_CURVE('',#635,#1019,#1021,.T.);+#1019=VERTEX_POINT('',#1020);+#1020=CARTESIAN_POINT('',(-3.9,2.475,0.2));+#1021=LINE('',#636,#116);+#1022=ORIENTED_EDGE('',*,*,#1023,.T.);+#1023=EDGE_CURVE('',#1019,#1024,#1026,.T.);+#1024=VERTEX_POINT('',#1025);+#1025=CARTESIAN_POINT('',(-3.9,2.475,0.));+#1026=LINE('',#1020,#368);+#1027=ORIENTED_EDGE('',*,*,#1028,.T.);+#1028=EDGE_CURVE('',#1024,#1003,#1029,.T.);+#1029=LINE('',#1025,#934);+#1030=PLANE('',#1031);+#1031=AXIS2_PLACEMENT_3D('',#1032,#879,#369);+#1032=CARTESIAN_POINT('',(-3.9,2.082,9.3E-02));+#1033=ADVANCED_FACE('',(#1034),#1054,.T.);+#1034=FACE_BOUND('',#1035,.T.);+#1035=EDGE_LOOP('',(#1036,#275,#642,#1041,#1046,#1051));+#1036=ORIENTED_EDGE('',*,*,#1037,.T.);+#1037=EDGE_CURVE('',#1038,#272,#1040,.T.);+#1038=VERTEX_POINT('',#1039);+#1039=CARTESIAN_POINT('',(-3.1,1.675,0.));+#1040=LINE('',#1039,#618);+#1041=ORIENTED_EDGE('',*,*,#1042,.T.);+#1042=EDGE_CURVE('',#644,#1043,#1045,.T.);+#1043=VERTEX_POINT('',#1044);+#1044=CARTESIAN_POINT('',(-3.1,2.475,0.2));+#1045=LINE('',#645,#116);+#1046=ORIENTED_EDGE('',*,*,#1047,.T.);+#1047=EDGE_CURVE('',#1043,#1048,#1050,.T.);+#1048=VERTEX_POINT('',#1049);+#1049=CARTESIAN_POINT('',(-3.1,2.475,0.));+#1050=LINE('',#1044,#368);+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1048,#1038,#1053,.T.);+#1053=LINE('',#1049,#934);+#1054=PLANE('',#1055);+#1055=AXIS2_PLACEMENT_3D('',#1056,#879,#369);+#1056=CARTESIAN_POINT('',(-3.1,2.082,9.3E-02));+#1057=ADVANCED_FACE('',(#1058),#1069,.T.);+#1058=FACE_BOUND('',#1059,.T.);+#1059=EDGE_LOOP('',(#1060,#1065,#270,#1068));+#1060=ORIENTED_EDGE('',*,*,#1061,.T.);+#1061=EDGE_CURVE('',#1038,#1062,#1064,.T.);+#1062=VERTEX_POINT('',#1063);+#1063=CARTESIAN_POINT('',(-2.9,1.675,0.));+#1064=LINE('',#1039,#110);+#1065=ORIENTED_EDGE('',*,*,#1066,.T.);+#1066=EDGE_CURVE('',#1062,#267,#1067,.T.);+#1067=LINE('',#1063,#618);+#1068=ORIENTED_EDGE('',*,*,#1037,.F.);+#1069=PLANE('',#1070);+#1070=AXIS2_PLACEMENT_3D('',#1039,#935,#13);+#1071=ADVANCED_FACE('',(#1072),#1089,.F.);+#1072=FACE_BOUND('',#1073,.F.);+#1073=EDGE_LOOP('',(#1065,#1074,#1075,#1076,#1081,#1086));+#1074=ORIENTED_EDGE('',*,*,#266,.T.);+#1075=ORIENTED_EDGE('',*,*,#653,.T.);+#1076=ORIENTED_EDGE('',*,*,#1077,.T.);+#1077=EDGE_CURVE('',#649,#1078,#1080,.T.);+#1078=VERTEX_POINT('',#1079);+#1079=CARTESIAN_POINT('',(-2.9,2.475,0.2));+#1080=LINE('',#650,#116);+#1081=ORIENTED_EDGE('',*,*,#1082,.T.);+#1082=EDGE_CURVE('',#1078,#1083,#1085,.T.);+#1083=VERTEX_POINT('',#1084);+#1084=CARTESIAN_POINT('',(-2.9,2.475,0.));+#1085=LINE('',#1079,#368);+#1086=ORIENTED_EDGE('',*,*,#1087,.T.);+#1087=EDGE_CURVE('',#1083,#1062,#1088,.T.);+#1088=LINE('',#1084,#934);+#1089=PLANE('',#1090);+#1090=AXIS2_PLACEMENT_3D('',#1091,#879,#369);+#1091=CARTESIAN_POINT('',(-2.9,2.082,9.3E-02));+#1092=ADVANCED_FACE('',(#1093),#1113,.T.);+#1093=FACE_BOUND('',#1094,.T.);+#1094=EDGE_LOOP('',(#1095,#256,#656,#1100,#1105,#1110));+#1095=ORIENTED_EDGE('',*,*,#1096,.T.);+#1096=EDGE_CURVE('',#1097,#253,#1099,.T.);+#1097=VERTEX_POINT('',#1098);+#1098=CARTESIAN_POINT('',(-2.1,1.675,0.));+#1099=LINE('',#1098,#618);+#1100=ORIENTED_EDGE('',*,*,#1101,.T.);+#1101=EDGE_CURVE('',#658,#1102,#1104,.T.);+#1102=VERTEX_POINT('',#1103);+#1103=CARTESIAN_POINT('',(-2.1,2.475,0.2));+#1104=LINE('',#659,#116);+#1105=ORIENTED_EDGE('',*,*,#1106,.T.);+#1106=EDGE_CURVE('',#1102,#1107,#1109,.T.);+#1107=VERTEX_POINT('',#1108);+#1108=CARTESIAN_POINT('',(-2.1,2.475,0.));+#1109=LINE('',#1103,#368);+#1110=ORIENTED_EDGE('',*,*,#1111,.T.);+#1111=EDGE_CURVE('',#1107,#1097,#1112,.T.);+#1112=LINE('',#1108,#934);+#1113=PLANE('',#1114);+#1114=AXIS2_PLACEMENT_3D('',#1115,#879,#369);+#1115=CARTESIAN_POINT('',(-2.1,2.082,9.3E-02));+#1116=ADVANCED_FACE('',(#1117),#1128,.T.);+#1117=FACE_BOUND('',#1118,.T.);+#1118=EDGE_LOOP('',(#1119,#1124,#251,#1127));+#1119=ORIENTED_EDGE('',*,*,#1120,.T.);+#1120=EDGE_CURVE('',#1097,#1121,#1123,.T.);+#1121=VERTEX_POINT('',#1122);+#1122=CARTESIAN_POINT('',(-1.9,1.675,0.));+#1123=LINE('',#1098,#110);+#1124=ORIENTED_EDGE('',*,*,#1125,.T.);+#1125=EDGE_CURVE('',#1121,#248,#1126,.T.);+#1126=LINE('',#1122,#618);+#1127=ORIENTED_EDGE('',*,*,#1096,.F.);+#1128=PLANE('',#1129);+#1129=AXIS2_PLACEMENT_3D('',#1098,#935,#13);+#1130=ADVANCED_FACE('',(#1131),#1148,.F.);+#1131=FACE_BOUND('',#1132,.F.);+#1132=EDGE_LOOP('',(#1124,#1133,#1134,#1135,#1140,#1145));+#1133=ORIENTED_EDGE('',*,*,#247,.T.);+#1134=ORIENTED_EDGE('',*,*,#667,.T.);+#1135=ORIENTED_EDGE('',*,*,#1136,.T.);+#1136=EDGE_CURVE('',#663,#1137,#1139,.T.);+#1137=VERTEX_POINT('',#1138);+#1138=CARTESIAN_POINT('',(-1.9,2.475,0.2));+#1139=LINE('',#664,#116);+#1140=ORIENTED_EDGE('',*,*,#1141,.T.);+#1141=EDGE_CURVE('',#1137,#1142,#1144,.T.);+#1142=VERTEX_POINT('',#1143);+#1143=CARTESIAN_POINT('',(-1.9,2.475,0.));+#1144=LINE('',#1138,#368);+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#1142,#1121,#1147,.T.);+#1147=LINE('',#1143,#934);+#1148=PLANE('',#1149);+#1149=AXIS2_PLACEMENT_3D('',#1150,#879,#369);+#1150=CARTESIAN_POINT('',(-1.9,2.082,9.3E-02));+#1151=ADVANCED_FACE('',(#1152),#1172,.T.);+#1152=FACE_BOUND('',#1153,.T.);+#1153=EDGE_LOOP('',(#1154,#237,#670,#1159,#1164,#1169));+#1154=ORIENTED_EDGE('',*,*,#1155,.T.);+#1155=EDGE_CURVE('',#1156,#234,#1158,.T.);+#1156=VERTEX_POINT('',#1157);+#1157=CARTESIAN_POINT('',(-1.1,1.675,0.));+#1158=LINE('',#1157,#618);+#1159=ORIENTED_EDGE('',*,*,#1160,.T.);+#1160=EDGE_CURVE('',#672,#1161,#1163,.T.);+#1161=VERTEX_POINT('',#1162);+#1162=CARTESIAN_POINT('',(-1.1,2.475,0.2));+#1163=LINE('',#673,#116);+#1164=ORIENTED_EDGE('',*,*,#1165,.T.);+#1165=EDGE_CURVE('',#1161,#1166,#1168,.T.);+#1166=VERTEX_POINT('',#1167);+#1167=CARTESIAN_POINT('',(-1.1,2.475,0.));+#1168=LINE('',#1162,#368);+#1169=ORIENTED_EDGE('',*,*,#1170,.T.);+#1170=EDGE_CURVE('',#1166,#1156,#1171,.T.);+#1171=LINE('',#1167,#934);+#1172=PLANE('',#1173);+#1173=AXIS2_PLACEMENT_3D('',#1174,#879,#369);+#1174=CARTESIAN_POINT('',(-1.1,2.082,9.3E-02));+#1175=ADVANCED_FACE('',(#1176),#1187,.T.);+#1176=FACE_BOUND('',#1177,.T.);+#1177=EDGE_LOOP('',(#1178,#1183,#232,#1186));+#1178=ORIENTED_EDGE('',*,*,#1179,.T.);+#1179=EDGE_CURVE('',#1156,#1180,#1182,.T.);+#1180=VERTEX_POINT('',#1181);+#1181=CARTESIAN_POINT('',(-0.9,1.675,0.));+#1182=LINE('',#1157,#110);+#1183=ORIENTED_EDGE('',*,*,#1184,.T.);+#1184=EDGE_CURVE('',#1180,#229,#1185,.T.);+#1185=LINE('',#1181,#618);+#1186=ORIENTED_EDGE('',*,*,#1155,.F.);+#1187=PLANE('',#1188);+#1188=AXIS2_PLACEMENT_3D('',#1157,#935,#13);+#1189=ADVANCED_FACE('',(#1190),#1207,.F.);+#1190=FACE_BOUND('',#1191,.F.);+#1191=EDGE_LOOP('',(#1183,#1192,#1193,#1194,#1199,#1204));+#1192=ORIENTED_EDGE('',*,*,#228,.T.);+#1193=ORIENTED_EDGE('',*,*,#681,.T.);+#1194=ORIENTED_EDGE('',*,*,#1195,.T.);+#1195=EDGE_CURVE('',#677,#1196,#1198,.T.);+#1196=VERTEX_POINT('',#1197);+#1197=CARTESIAN_POINT('',(-0.9,2.475,0.2));+#1198=LINE('',#678,#116);+#1199=ORIENTED_EDGE('',*,*,#1200,.T.);+#1200=EDGE_CURVE('',#1196,#1201,#1203,.T.);+#1201=VERTEX_POINT('',#1202);+#1202=CARTESIAN_POINT('',(-0.9,2.475,0.));+#1203=LINE('',#1197,#368);+#1204=ORIENTED_EDGE('',*,*,#1205,.T.);+#1205=EDGE_CURVE('',#1201,#1180,#1206,.T.);+#1206=LINE('',#1202,#934);+#1207=PLANE('',#1208);+#1208=AXIS2_PLACEMENT_3D('',#1209,#879,#369);+#1209=CARTESIAN_POINT('',(-0.9,2.082,9.3E-02));+#1210=ADVANCED_FACE('',(#1211),#1231,.T.);+#1211=FACE_BOUND('',#1212,.T.);+#1212=EDGE_LOOP('',(#1213,#218,#684,#1218,#1223,#1228));+#1213=ORIENTED_EDGE('',*,*,#1214,.T.);+#1214=EDGE_CURVE('',#1215,#215,#1217,.T.);+#1215=VERTEX_POINT('',#1216);+#1216=CARTESIAN_POINT('',(-1.E-01,1.675,0.));+#1217=LINE('',#1216,#618);+#1218=ORIENTED_EDGE('',*,*,#1219,.T.);+#1219=EDGE_CURVE('',#686,#1220,#1222,.T.);+#1220=VERTEX_POINT('',#1221);+#1221=CARTESIAN_POINT('',(-1.E-01,2.475,0.2));+#1222=LINE('',#687,#116);+#1223=ORIENTED_EDGE('',*,*,#1224,.T.);+#1224=EDGE_CURVE('',#1220,#1225,#1227,.T.);+#1225=VERTEX_POINT('',#1226);+#1226=CARTESIAN_POINT('',(-1.E-01,2.475,0.));+#1227=LINE('',#1221,#368);+#1228=ORIENTED_EDGE('',*,*,#1229,.T.);+#1229=EDGE_CURVE('',#1225,#1215,#1230,.T.);+#1230=LINE('',#1226,#934);+#1231=PLANE('',#1232);+#1232=AXIS2_PLACEMENT_3D('',#1233,#879,#369);+#1233=CARTESIAN_POINT('',(-1.E-01,2.082,9.3E-02));+#1234=ADVANCED_FACE('',(#1235),#1246,.T.);+#1235=FACE_BOUND('',#1236,.T.);+#1236=EDGE_LOOP('',(#1237,#1242,#213,#1245));+#1237=ORIENTED_EDGE('',*,*,#1238,.T.);+#1238=EDGE_CURVE('',#1215,#1239,#1241,.T.);+#1239=VERTEX_POINT('',#1240);+#1240=CARTESIAN_POINT('',(0.1,1.675,0.));+#1241=LINE('',#1216,#110);+#1242=ORIENTED_EDGE('',*,*,#1243,.T.);+#1243=EDGE_CURVE('',#1239,#210,#1244,.T.);+#1244=LINE('',#1240,#618);+#1245=ORIENTED_EDGE('',*,*,#1214,.F.);+#1246=PLANE('',#1247);+#1247=AXIS2_PLACEMENT_3D('',#1216,#935,#13);+#1248=ADVANCED_FACE('',(#1249),#1266,.F.);+#1249=FACE_BOUND('',#1250,.F.);+#1250=EDGE_LOOP('',(#1242,#1251,#1252,#1253,#1258,#1263));+#1251=ORIENTED_EDGE('',*,*,#209,.T.);+#1252=ORIENTED_EDGE('',*,*,#695,.T.);+#1253=ORIENTED_EDGE('',*,*,#1254,.T.);+#1254=EDGE_CURVE('',#691,#1255,#1257,.T.);+#1255=VERTEX_POINT('',#1256);+#1256=CARTESIAN_POINT('',(0.1,2.475,0.2));+#1257=LINE('',#692,#116);+#1258=ORIENTED_EDGE('',*,*,#1259,.T.);+#1259=EDGE_CURVE('',#1255,#1260,#1262,.T.);+#1260=VERTEX_POINT('',#1261);+#1261=CARTESIAN_POINT('',(0.1,2.475,0.));+#1262=LINE('',#1256,#368);+#1263=ORIENTED_EDGE('',*,*,#1264,.T.);+#1264=EDGE_CURVE('',#1260,#1239,#1265,.T.);+#1265=LINE('',#1261,#934);+#1266=PLANE('',#1267);+#1267=AXIS2_PLACEMENT_3D('',#1268,#879,#369);+#1268=CARTESIAN_POINT('',(0.1,2.082,9.3E-02));+#1269=ADVANCED_FACE('',(#1270),#1290,.T.);+#1270=FACE_BOUND('',#1271,.T.);+#1271=EDGE_LOOP('',(#1272,#199,#698,#1277,#1282,#1287));+#1272=ORIENTED_EDGE('',*,*,#1273,.T.);+#1273=EDGE_CURVE('',#1274,#196,#1276,.T.);+#1274=VERTEX_POINT('',#1275);+#1275=CARTESIAN_POINT('',(0.9,1.675,0.));+#1276=LINE('',#1275,#618);+#1277=ORIENTED_EDGE('',*,*,#1278,.T.);+#1278=EDGE_CURVE('',#700,#1279,#1281,.T.);+#1279=VERTEX_POINT('',#1280);+#1280=CARTESIAN_POINT('',(0.9,2.475,0.2));+#1281=LINE('',#701,#116);+#1282=ORIENTED_EDGE('',*,*,#1283,.T.);+#1283=EDGE_CURVE('',#1279,#1284,#1286,.T.);+#1284=VERTEX_POINT('',#1285);+#1285=CARTESIAN_POINT('',(0.9,2.475,0.));+#1286=LINE('',#1280,#368);+#1287=ORIENTED_EDGE('',*,*,#1288,.T.);+#1288=EDGE_CURVE('',#1284,#1274,#1289,.T.);+#1289=LINE('',#1285,#934);+#1290=PLANE('',#1291);+#1291=AXIS2_PLACEMENT_3D('',#1292,#879,#369);+#1292=CARTESIAN_POINT('',(0.9,2.082,9.3E-02));+#1293=ADVANCED_FACE('',(#1294),#1305,.T.);+#1294=FACE_BOUND('',#1295,.T.);+#1295=EDGE_LOOP('',(#1296,#1301,#194,#1304));+#1296=ORIENTED_EDGE('',*,*,#1297,.T.);+#1297=EDGE_CURVE('',#1274,#1298,#1300,.T.);+#1298=VERTEX_POINT('',#1299);+#1299=CARTESIAN_POINT('',(1.1,1.675,0.));+#1300=LINE('',#1275,#110);+#1301=ORIENTED_EDGE('',*,*,#1302,.T.);+#1302=EDGE_CURVE('',#1298,#191,#1303,.T.);+#1303=LINE('',#1299,#618);+#1304=ORIENTED_EDGE('',*,*,#1273,.F.);+#1305=PLANE('',#1306);+#1306=AXIS2_PLACEMENT_3D('',#1275,#935,#13);+#1307=ADVANCED_FACE('',(#1308),#1325,.F.);+#1308=FACE_BOUND('',#1309,.F.);+#1309=EDGE_LOOP('',(#1301,#1310,#1311,#1312,#1317,#1322));+#1310=ORIENTED_EDGE('',*,*,#190,.T.);+#1311=ORIENTED_EDGE('',*,*,#709,.T.);+#1312=ORIENTED_EDGE('',*,*,#1313,.T.);+#1313=EDGE_CURVE('',#705,#1314,#1316,.T.);+#1314=VERTEX_POINT('',#1315);+#1315=CARTESIAN_POINT('',(1.1,2.475,0.2));+#1316=LINE('',#706,#116);+#1317=ORIENTED_EDGE('',*,*,#1318,.T.);+#1318=EDGE_CURVE('',#1314,#1319,#1321,.T.);+#1319=VERTEX_POINT('',#1320);+#1320=CARTESIAN_POINT('',(1.1,2.475,0.));+#1321=LINE('',#1315,#368);+#1322=ORIENTED_EDGE('',*,*,#1323,.T.);+#1323=EDGE_CURVE('',#1319,#1298,#1324,.T.);+#1324=LINE('',#1320,#934);+#1325=PLANE('',#1326);+#1326=AXIS2_PLACEMENT_3D('',#1327,#879,#369);+#1327=CARTESIAN_POINT('',(1.1,2.082,9.3E-02));+#1328=ADVANCED_FACE('',(#1329),#1349,.T.);+#1329=FACE_BOUND('',#1330,.T.);+#1330=EDGE_LOOP('',(#1331,#180,#712,#1336,#1341,#1346));+#1331=ORIENTED_EDGE('',*,*,#1332,.T.);+#1332=EDGE_CURVE('',#1333,#177,#1335,.T.);+#1333=VERTEX_POINT('',#1334);+#1334=CARTESIAN_POINT('',(1.9,1.675,0.));+#1335=LINE('',#1334,#618);+#1336=ORIENTED_EDGE('',*,*,#1337,.T.);+#1337=EDGE_CURVE('',#714,#1338,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(1.9,2.475,0.2));+#1340=LINE('',#715,#116);+#1341=ORIENTED_EDGE('',*,*,#1342,.T.);+#1342=EDGE_CURVE('',#1338,#1343,#1345,.T.);+#1343=VERTEX_POINT('',#1344);+#1344=CARTESIAN_POINT('',(1.9,2.475,0.));+#1345=LINE('',#1339,#368);+#1346=ORIENTED_EDGE('',*,*,#1347,.T.);+#1347=EDGE_CURVE('',#1343,#1333,#1348,.T.);+#1348=LINE('',#1344,#934);+#1349=PLANE('',#1350);+#1350=AXIS2_PLACEMENT_3D('',#1351,#879,#369);+#1351=CARTESIAN_POINT('',(1.9,2.082,9.3E-02));+#1352=ADVANCED_FACE('',(#1353),#1364,.T.);+#1353=FACE_BOUND('',#1354,.T.);+#1354=EDGE_LOOP('',(#1355,#1360,#175,#1363));+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1333,#1357,#1359,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(2.1,1.675,0.));+#1359=LINE('',#1334,#110);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#1357,#172,#1362,.T.);+#1362=LINE('',#1358,#618);+#1363=ORIENTED_EDGE('',*,*,#1332,.F.);+#1364=PLANE('',#1365);+#1365=AXIS2_PLACEMENT_3D('',#1334,#935,#13);+#1366=ADVANCED_FACE('',(#1367),#1384,.F.);+#1367=FACE_BOUND('',#1368,.F.);+#1368=EDGE_LOOP('',(#1360,#1369,#1370,#1371,#1376,#1381));+#1369=ORIENTED_EDGE('',*,*,#171,.T.);+#1370=ORIENTED_EDGE('',*,*,#723,.T.);+#1371=ORIENTED_EDGE('',*,*,#1372,.T.);+#1372=EDGE_CURVE('',#719,#1373,#1375,.T.);+#1373=VERTEX_POINT('',#1374);+#1374=CARTESIAN_POINT('',(2.1,2.475,0.2));+#1375=LINE('',#720,#116);+#1376=ORIENTED_EDGE('',*,*,#1377,.T.);+#1377=EDGE_CURVE('',#1373,#1378,#1380,.T.);+#1378=VERTEX_POINT('',#1379);+#1379=CARTESIAN_POINT('',(2.1,2.475,0.));+#1380=LINE('',#1374,#368);+#1381=ORIENTED_EDGE('',*,*,#1382,.T.);+#1382=EDGE_CURVE('',#1378,#1357,#1383,.T.);+#1383=LINE('',#1379,#934);+#1384=PLANE('',#1385);+#1385=AXIS2_PLACEMENT_3D('',#1386,#879,#369);+#1386=CARTESIAN_POINT('',(2.1,2.082,9.3E-02));+#1387=ADVANCED_FACE('',(#1388),#1408,.T.);+#1388=FACE_BOUND('',#1389,.T.);+#1389=EDGE_LOOP('',(#1390,#161,#726,#1395,#1400,#1405));+#1390=ORIENTED_EDGE('',*,*,#1391,.T.);+#1391=EDGE_CURVE('',#1392,#158,#1394,.T.);+#1392=VERTEX_POINT('',#1393);+#1393=CARTESIAN_POINT('',(2.9,1.675,0.));+#1394=LINE('',#1393,#618);+#1395=ORIENTED_EDGE('',*,*,#1396,.T.);+#1396=EDGE_CURVE('',#728,#1397,#1399,.T.);+#1397=VERTEX_POINT('',#1398);+#1398=CARTESIAN_POINT('',(2.9,2.475,0.2));+#1399=LINE('',#729,#116);+#1400=ORIENTED_EDGE('',*,*,#1401,.T.);+#1401=EDGE_CURVE('',#1397,#1402,#1404,.T.);+#1402=VERTEX_POINT('',#1403);+#1403=CARTESIAN_POINT('',(2.9,2.475,0.));+#1404=LINE('',#1398,#368);+#1405=ORIENTED_EDGE('',*,*,#1406,.T.);+#1406=EDGE_CURVE('',#1402,#1392,#1407,.T.);+#1407=LINE('',#1403,#934);+#1408=PLANE('',#1409);+#1409=AXIS2_PLACEMENT_3D('',#1410,#879,#369);+#1410=CARTESIAN_POINT('',(2.9,2.082,9.3E-02));+#1411=ADVANCED_FACE('',(#1412),#1423,.T.);+#1412=FACE_BOUND('',#1413,.T.);+#1413=EDGE_LOOP('',(#1414,#1419,#156,#1422));+#1414=ORIENTED_EDGE('',*,*,#1415,.T.);+#1415=EDGE_CURVE('',#1392,#1416,#1418,.T.);+#1416=VERTEX_POINT('',#1417);+#1417=CARTESIAN_POINT('',(3.1,1.675,0.));+#1418=LINE('',#1393,#110);+#1419=ORIENTED_EDGE('',*,*,#1420,.T.);+#1420=EDGE_CURVE('',#1416,#153,#1421,.T.);+#1421=LINE('',#1417,#618);+#1422=ORIENTED_EDGE('',*,*,#1391,.F.);+#1423=PLANE('',#1424);+#1424=AXIS2_PLACEMENT_3D('',#1393,#935,#13);+#1425=ADVANCED_FACE('',(#1426),#1443,.F.);+#1426=FACE_BOUND('',#1427,.F.);+#1427=EDGE_LOOP('',(#1419,#1428,#1429,#1430,#1435,#1440));+#1428=ORIENTED_EDGE('',*,*,#152,.T.);+#1429=ORIENTED_EDGE('',*,*,#737,.T.);+#1430=ORIENTED_EDGE('',*,*,#1431,.T.);+#1431=EDGE_CURVE('',#733,#1432,#1434,.T.);+#1432=VERTEX_POINT('',#1433);+#1433=CARTESIAN_POINT('',(3.1,2.475,0.2));+#1434=LINE('',#734,#116);+#1435=ORIENTED_EDGE('',*,*,#1436,.T.);+#1436=EDGE_CURVE('',#1432,#1437,#1439,.T.);+#1437=VERTEX_POINT('',#1438);+#1438=CARTESIAN_POINT('',(3.1,2.475,0.));+#1439=LINE('',#1433,#368);+#1440=ORIENTED_EDGE('',*,*,#1441,.T.);+#1441=EDGE_CURVE('',#1437,#1416,#1442,.T.);+#1442=LINE('',#1438,#934);+#1443=PLANE('',#1444);+#1444=AXIS2_PLACEMENT_3D('',#1445,#879,#369);+#1445=CARTESIAN_POINT('',(3.1,2.082,9.3E-02));+#1446=ADVANCED_FACE('',(#1447),#1467,.T.);+#1447=FACE_BOUND('',#1448,.T.);+#1448=EDGE_LOOP('',(#1449,#142,#740,#1454,#1459,#1464));+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1451,#139,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(3.9,1.675,0.));+#1453=LINE('',#1452,#618);+#1454=ORIENTED_EDGE('',*,*,#1455,.T.);+#1455=EDGE_CURVE('',#742,#1456,#1458,.T.);+#1456=VERTEX_POINT('',#1457);+#1457=CARTESIAN_POINT('',(3.9,2.475,0.2));+#1458=LINE('',#743,#116);+#1459=ORIENTED_EDGE('',*,*,#1460,.T.);+#1460=EDGE_CURVE('',#1456,#1461,#1463,.T.);+#1461=VERTEX_POINT('',#1462);+#1462=CARTESIAN_POINT('',(3.9,2.475,0.));+#1463=LINE('',#1457,#368);+#1464=ORIENTED_EDGE('',*,*,#1465,.T.);+#1465=EDGE_CURVE('',#1461,#1451,#1466,.T.);+#1466=LINE('',#1462,#934);+#1467=PLANE('',#1468);+#1468=AXIS2_PLACEMENT_3D('',#1469,#879,#369);+#1469=CARTESIAN_POINT('',(3.9,2.082,9.3E-02));+#1470=ADVANCED_FACE('',(#1471),#1482,.T.);+#1471=FACE_BOUND('',#1472,.T.);+#1472=EDGE_LOOP('',(#1473,#1478,#137,#1481));+#1473=ORIENTED_EDGE('',*,*,#1474,.T.);+#1474=EDGE_CURVE('',#1451,#1475,#1477,.T.);+#1475=VERTEX_POINT('',#1476);+#1476=CARTESIAN_POINT('',(4.1,1.675,0.));+#1477=LINE('',#1452,#110);+#1478=ORIENTED_EDGE('',*,*,#1479,.T.);+#1479=EDGE_CURVE('',#1475,#134,#1480,.T.);+#1480=LINE('',#1476,#618);+#1481=ORIENTED_EDGE('',*,*,#1450,.F.);+#1482=PLANE('',#1483);+#1483=AXIS2_PLACEMENT_3D('',#1452,#935,#13);+#1484=ADVANCED_FACE('',(#1485),#1502,.F.);+#1485=FACE_BOUND('',#1486,.F.);+#1486=EDGE_LOOP('',(#1478,#1487,#1488,#1489,#1494,#1499));+#1487=ORIENTED_EDGE('',*,*,#133,.T.);+#1488=ORIENTED_EDGE('',*,*,#751,.T.);+#1489=ORIENTED_EDGE('',*,*,#1490,.T.);+#1490=EDGE_CURVE('',#747,#1491,#1493,.T.);+#1491=VERTEX_POINT('',#1492);+#1492=CARTESIAN_POINT('',(4.1,2.475,0.2));+#1493=LINE('',#748,#116);+#1494=ORIENTED_EDGE('',*,*,#1495,.T.);+#1495=EDGE_CURVE('',#1491,#1496,#1498,.T.);+#1496=VERTEX_POINT('',#1497);+#1497=CARTESIAN_POINT('',(4.1,2.475,0.));+#1498=LINE('',#1492,#368);+#1499=ORIENTED_EDGE('',*,*,#1500,.T.);+#1500=EDGE_CURVE('',#1496,#1475,#1501,.T.);+#1501=LINE('',#1497,#934);+#1502=PLANE('',#1503);+#1503=AXIS2_PLACEMENT_3D('',#1504,#879,#369);+#1504=CARTESIAN_POINT('',(4.1,2.082,9.3E-02));+#1505=ADVANCED_FACE('',(#1506),#1526,.T.);+#1506=FACE_BOUND('',#1507,.T.);+#1507=EDGE_LOOP('',(#1508,#123,#754,#1513,#1518,#1523));+#1508=ORIENTED_EDGE('',*,*,#1509,.T.);+#1509=EDGE_CURVE('',#1510,#120,#1512,.T.);+#1510=VERTEX_POINT('',#1511);+#1511=CARTESIAN_POINT('',(4.9,1.675,0.));+#1512=LINE('',#1511,#618);+#1513=ORIENTED_EDGE('',*,*,#1514,.T.);+#1514=EDGE_CURVE('',#756,#1515,#1517,.T.);+#1515=VERTEX_POINT('',#1516);+#1516=CARTESIAN_POINT('',(4.9,2.475,0.2));+#1517=LINE('',#757,#116);+#1518=ORIENTED_EDGE('',*,*,#1519,.T.);+#1519=EDGE_CURVE('',#1515,#1520,#1522,.T.);+#1520=VERTEX_POINT('',#1521);+#1521=CARTESIAN_POINT('',(4.9,2.475,0.));+#1522=LINE('',#1516,#368);+#1523=ORIENTED_EDGE('',*,*,#1524,.T.);+#1524=EDGE_CURVE('',#1520,#1510,#1525,.T.);+#1525=LINE('',#1521,#934);+#1526=PLANE('',#1527);+#1527=AXIS2_PLACEMENT_3D('',#1528,#879,#369);+#1528=CARTESIAN_POINT('',(4.9,2.082,9.3E-02));+#1529=ADVANCED_FACE('',(#1530),#1541,.T.);+#1530=FACE_BOUND('',#1531,.T.);+#1531=EDGE_LOOP('',(#1532,#1537,#118,#1540));+#1532=ORIENTED_EDGE('',*,*,#1533,.T.);+#1533=EDGE_CURVE('',#1510,#1534,#1536,.T.);+#1534=VERTEX_POINT('',#1535);+#1535=CARTESIAN_POINT('',(5.1,1.675,0.));+#1536=LINE('',#1511,#110);+#1537=ORIENTED_EDGE('',*,*,#1538,.T.);+#1538=EDGE_CURVE('',#1534,#113,#1539,.T.);+#1539=LINE('',#1535,#618);+#1540=ORIENTED_EDGE('',*,*,#1509,.F.);+#1541=PLANE('',#1542);+#1542=AXIS2_PLACEMENT_3D('',#1511,#935,#13);+#1543=ADVANCED_FACE('',(#1544),#1561,.F.);+#1544=FACE_BOUND('',#1545,.F.);+#1545=EDGE_LOOP('',(#1537,#1546,#1547,#1548,#1553,#1558));+#1546=ORIENTED_EDGE('',*,*,#112,.T.);+#1547=ORIENTED_EDGE('',*,*,#765,.T.);+#1548=ORIENTED_EDGE('',*,*,#1549,.T.);+#1549=EDGE_CURVE('',#761,#1550,#1552,.T.);+#1550=VERTEX_POINT('',#1551);+#1551=CARTESIAN_POINT('',(5.1,2.475,0.2));+#1552=LINE('',#762,#116);+#1553=ORIENTED_EDGE('',*,*,#1554,.T.);+#1554=EDGE_CURVE('',#1550,#1555,#1557,.T.);+#1555=VERTEX_POINT('',#1556);+#1556=CARTESIAN_POINT('',(5.1,2.475,0.));+#1557=LINE('',#1551,#368);+#1558=ORIENTED_EDGE('',*,*,#1559,.T.);+#1559=EDGE_CURVE('',#1555,#1534,#1560,.T.);+#1560=LINE('',#1556,#934);+#1561=PLANE('',#1562);+#1562=AXIS2_PLACEMENT_3D('',#1563,#879,#369);+#1563=CARTESIAN_POINT('',(5.1,2.082,9.3E-02));+#1564=ADVANCED_FACE('',(#1565),#1576,.T.);+#1565=FACE_BOUND('',#1566,.T.);+#1566=EDGE_LOOP('',(#1567,#412,#397,#382,#365,#1572,#1573));+#1567=ORIENTED_EDGE('',*,*,#1568,.T.);+#1568=EDGE_CURVE('',#1569,#409,#1571,.T.);+#1569=VERTEX_POINT('',#1570);+#1570=CARTESIAN_POINT('',(-6.2,-2.475,1.E-02));+#1571=LINE('',#1570,#618);+#1572=ORIENTED_EDGE('',*,*,#905,.T.);+#1573=ORIENTED_EDGE('',*,*,#1574,.T.);+#1574=EDGE_CURVE('',#906,#1569,#1575,.T.);+#1575=LINE('',#907,#870);+#1576=PLANE('',#1577);+#1577=AXIS2_PLACEMENT_3D('',#1578,#879,#369);+#1578=CARTESIAN_POINT('',(-6.2,-1.843181818182,0.516818181818));+#1579=ADVANCED_FACE('',(#1580),#1588,.T.);+#1580=FACE_BOUND('',#1581,.T.);+#1581=EDGE_LOOP('',(#1582,#890,#1585,#1586,#1587));+#1582=ORIENTED_EDGE('',*,*,#1583,.T.);+#1583=EDGE_CURVE('',#1569,#887,#1584,.T.);+#1584=LINE('',#1570,#110);+#1585=ORIENTED_EDGE('',*,*,#426,.T.);+#1586=ORIENTED_EDGE('',*,*,#422,.F.);+#1587=ORIENTED_EDGE('',*,*,#1568,.F.);+#1588=PLANE('',#1589);+#1589=AXIS2_PLACEMENT_3D('',#1570,#935,#13);+#1590=ADVANCED_FACE('',(#1591),#1604,.T.);+#1591=FACE_BOUND('',#1592,.T.);+#1592=EDGE_LOOP('',(#1593,#1598,#1601,#1602,#1603));+#1593=ORIENTED_EDGE('',*,*,#1594,.T.);+#1594=EDGE_CURVE('',#867,#1595,#1597,.T.);+#1595=VERTEX_POINT('',#1596);+#1596=CARTESIAN_POINT('',(6.2,-2.475,1.E-02));+#1597=LINE('',#868,#110);+#1598=ORIENTED_EDGE('',*,*,#1599,.T.);+#1599=EDGE_CURVE('',#1595,#435,#1600,.T.);+#1600=LINE('',#1596,#618);+#1601=ORIENTED_EDGE('',*,*,#434,.F.);+#1602=ORIENTED_EDGE('',*,*,#429,.F.);+#1603=ORIENTED_EDGE('',*,*,#873,.F.);+#1604=PLANE('',#1605);+#1605=AXIS2_PLACEMENT_3D('',#868,#935,#13);+#1606=ADVANCED_FACE('',(#1607),#1618,.F.);+#1607=FACE_BOUND('',#1608,.F.);+#1608=EDGE_LOOP('',(#1609,#438,#810,#1614));+#1609=ORIENTED_EDGE('',*,*,#1610,.F.);+#1610=EDGE_CURVE('',#435,#1611,#1613,.T.);+#1611=VERTEX_POINT('',#1612);+#1612=CARTESIAN_POINT('',(6.2,-1.975,1.26));+#1613=LINE('',#436,#116);+#1614=ORIENTED_EDGE('',*,*,#1615,.F.);+#1615=EDGE_CURVE('',#1611,#812,#1616,.T.);+#1616=LINE('',#1617,#110);+#1617=CARTESIAN_POINT('',(6.,-1.975,1.26));+#1618=PLANE('',#1619);+#1619=AXIS2_PLACEMENT_3D('',#431,#35,#76);+#1620=ADVANCED_FACE('',(#1621),#1650,.F.);+#1621=FACE_BOUND('',#1622,.F.);+#1622=EDGE_LOOP('',(#453,#1623,#1628,#1633,#497,#1636,#1641,#1647));+#1623=ORIENTED_EDGE('',*,*,#1624,.T.);+#1624=EDGE_CURVE('',#455,#1625,#1627,.T.);+#1625=VERTEX_POINT('',#1626);+#1626=CARTESIAN_POINT('',(5.7,0.525,0.46));+#1627=LINE('',#456,#75);+#1628=ORIENTED_EDGE('',*,*,#1629,.T.);+#1629=EDGE_CURVE('',#1625,#1630,#1632,.T.);+#1630=VERTEX_POINT('',#1631);+#1631=CARTESIAN_POINT('',(5.7,0.525,2.56));+#1632=LINE('',#1626,#34);+#1633=ORIENTED_EDGE('',*,*,#1634,.F.);+#1634=EDGE_CURVE('',#494,#1630,#1635,.T.);+#1635=LINE('',#495,#75);+#1636=ORIENTED_EDGE('',*,*,#1637,.F.);+#1637=EDGE_CURVE('',#1638,#499,#1640,.T.);+#1638=VERTEX_POINT('',#1639);+#1639=CARTESIAN_POINT('',(5.7,-7.5E-02,2.06));+#1640=LINE('',#500,#27);+#1641=ORIENTED_EDGE('',*,*,#1642,.T.);+#1642=EDGE_CURVE('',#1638,#1643,#1645,.T.);+#1643=VERTEX_POINT('',#1644);+#1644=CARTESIAN_POINT('',(5.7,-7.5E-02,1.46));+#1645=LINE('',#1646,#82);+#1646=CARTESIAN_POINT('',(5.7,-7.5E-02,1.11));+#1647=ORIENTED_EDGE('',*,*,#1648,.F.);+#1648=EDGE_CURVE('',#457,#1643,#1649,.T.);+#1649=LINE('',#458,#75);+#1650=PLANE('',#1651);+#1651=AXIS2_PLACEMENT_3D('',#456,#94,#35);+#1652=ADVANCED_FACE('',(#1653),#1665,.F.);+#1653=FACE_BOUND('',#1654,.F.);+#1654=EDGE_LOOP('',(#509,#1655,#1656,#1662));+#1655=ORIENTED_EDGE('',*,*,#1648,.T.);+#1656=ORIENTED_EDGE('',*,*,#1657,.T.);+#1657=EDGE_CURVE('',#1643,#1658,#1660,.T.);+#1658=VERTEX_POINT('',#1659);+#1659=CARTESIAN_POINT('',(6.05,-7.5E-02,1.46));+#1660=LINE('',#1661,#110);+#1661=CARTESIAN_POINT('',(-6.05,-7.5E-02,1.46));+#1662=ORIENTED_EDGE('',*,*,#1663,.F.);+#1663=EDGE_CURVE('',#506,#1658,#1664,.T.);+#1664=LINE('',#507,#75);+#1665=PLANE('',#1666);+#1666=AXIS2_PLACEMENT_3D('',#474,#83,#94);+#1667=ADVANCED_FACE('',(#1668),#1679,.F.);+#1668=FACE_BOUND('',#1669,.F.);+#1669=EDGE_LOOP('',(#1670,#1671,#1676,#504));+#1670=ORIENTED_EDGE('',*,*,#1663,.T.);+#1671=ORIENTED_EDGE('',*,*,#1672,.T.);+#1672=EDGE_CURVE('',#1658,#1673,#1675,.T.);+#1673=VERTEX_POINT('',#1674);+#1674=CARTESIAN_POINT('',(6.05,-7.5E-02,2.06));+#1675=LINE('',#1659,#34);+#1676=ORIENTED_EDGE('',*,*,#1677,.F.);+#1677=EDGE_CURVE('',#503,#1673,#1678,.T.);+#1678=LINE('',#486,#75);+#1679=PLANE('',#1680);+#1680=AXIS2_PLACEMENT_3D('',#507,#94,#35);+#1681=ADVANCED_FACE('',(#1682),#1689,.F.);+#1682=FACE_BOUND('',#1683,.F.);+#1683=EDGE_LOOP('',(#501,#1684,#1685,#1688));+#1684=ORIENTED_EDGE('',*,*,#1677,.T.);+#1685=ORIENTED_EDGE('',*,*,#1686,.T.);+#1686=EDGE_CURVE('',#1673,#1638,#1687,.T.);+#1687=LINE('',#1674,#487);+#1688=ORIENTED_EDGE('',*,*,#1637,.T.);+#1689=PLANE('',#1690);+#1690=AXIS2_PLACEMENT_3D('',#486,#35,#488);+#1691=ADVANCED_FACE('',(#1692),#1703,.F.);+#1692=FACE_BOUND('',#1693,.F.);+#1693=EDGE_LOOP('',(#1694,#1695,#1700,#492));+#1694=ORIENTED_EDGE('',*,*,#1634,.T.);+#1695=ORIENTED_EDGE('',*,*,#1696,.T.);+#1696=EDGE_CURVE('',#1630,#1697,#1699,.T.);+#1697=VERTEX_POINT('',#1698);+#1698=CARTESIAN_POINT('',(-5.7,0.525,2.56));+#1699=LINE('',#1631,#487);+#1700=ORIENTED_EDGE('',*,*,#1701,.F.);+#1701=EDGE_CURVE('',#491,#1697,#1702,.T.);+#1702=LINE('',#470,#75);+#1703=PLANE('',#1704);+#1704=AXIS2_PLACEMENT_3D('',#495,#35,#488);+#1705=ADVANCED_FACE('',(#1706),#1731,.F.);+#1706=FACE_BOUND('',#1707,.F.);+#1707=EDGE_LOOP('',(#489,#1708,#1709,#1714,#465,#1717,#1722,#1728));+#1708=ORIENTED_EDGE('',*,*,#1701,.T.);+#1709=ORIENTED_EDGE('',*,*,#1710,.T.);+#1710=EDGE_CURVE('',#1697,#1711,#1713,.T.);+#1711=VERTEX_POINT('',#1712);+#1712=CARTESIAN_POINT('',(-5.7,0.525,0.46));+#1713=LINE('',#1698,#82);+#1714=ORIENTED_EDGE('',*,*,#1715,.F.);+#1715=EDGE_CURVE('',#462,#1711,#1716,.T.);+#1716=LINE('',#463,#75);+#1717=ORIENTED_EDGE('',*,*,#1718,.F.);+#1718=EDGE_CURVE('',#1719,#467,#1721,.T.);+#1719=VERTEX_POINT('',#1720);+#1720=CARTESIAN_POINT('',(-5.7,-7.5E-02,1.46));+#1721=LINE('',#468,#27);+#1722=ORIENTED_EDGE('',*,*,#1723,.T.);+#1723=EDGE_CURVE('',#1719,#1724,#1726,.T.);+#1724=VERTEX_POINT('',#1725);+#1725=CARTESIAN_POINT('',(-5.7,-7.5E-02,2.06));+#1726=LINE('',#1727,#34);+#1727=CARTESIAN_POINT('',(-5.7,-7.5E-02,2.16));+#1728=ORIENTED_EDGE('',*,*,#1729,.F.);+#1729=EDGE_CURVE('',#483,#1724,#1730,.T.);+#1730=LINE('',#484,#75);+#1731=PLANE('',#1732);+#1732=AXIS2_PLACEMENT_3D('',#470,#488,#83);+#1733=ADVANCED_FACE('',(#1734),#1689,.F.);+#1734=FACE_BOUND('',#1735,.F.);+#1735=EDGE_LOOP('',(#481,#1736,#1737,#1741));+#1736=ORIENTED_EDGE('',*,*,#1729,.T.);+#1737=ORIENTED_EDGE('',*,*,#1738,.T.);+#1738=EDGE_CURVE('',#1724,#1739,#1687,.T.);+#1739=VERTEX_POINT('',#1740);+#1740=CARTESIAN_POINT('',(-6.05,-7.5E-02,2.06));+#1741=ORIENTED_EDGE('',*,*,#1742,.F.);+#1742=EDGE_CURVE('',#478,#1739,#1743,.T.);+#1743=LINE('',#479,#75);+#1744=ADVANCED_FACE('',(#1745),#1755,.F.);+#1745=FACE_BOUND('',#1746,.F.);+#1746=EDGE_LOOP('',(#1747,#1748,#1752,#476));+#1747=ORIENTED_EDGE('',*,*,#1742,.T.);+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#1739,#1750,#1751,.T.);+#1750=VERTEX_POINT('',#1661);+#1751=LINE('',#1740,#82);+#1752=ORIENTED_EDGE('',*,*,#1753,.F.);+#1753=EDGE_CURVE('',#473,#1750,#1754,.T.);+#1754=LINE('',#474,#75);+#1755=PLANE('',#1756);+#1756=AXIS2_PLACEMENT_3D('',#479,#488,#83);+#1757=ADVANCED_FACE('',(#1758),#1665,.F.);+#1758=FACE_BOUND('',#1759,.F.);+#1759=EDGE_LOOP('',(#471,#1760,#1761,#1763));+#1760=ORIENTED_EDGE('',*,*,#1753,.T.);+#1761=ORIENTED_EDGE('',*,*,#1762,.T.);+#1762=EDGE_CURVE('',#1750,#1719,#1660,.T.);+#1763=ORIENTED_EDGE('',*,*,#1718,.T.);+#1764=ADVANCED_FACE('',(#1765),#1772,.F.);+#1765=FACE_BOUND('',#1766,.F.);+#1766=EDGE_LOOP('',(#1767,#1768,#1771,#460));+#1767=ORIENTED_EDGE('',*,*,#1715,.T.);+#1768=ORIENTED_EDGE('',*,*,#1769,.T.);+#1769=EDGE_CURVE('',#1711,#1625,#1770,.T.);+#1770=LINE('',#1712,#110);+#1771=ORIENTED_EDGE('',*,*,#1624,.F.);+#1772=PLANE('',#1773);+#1773=AXIS2_PLACEMENT_3D('',#463,#83,#94);+#1774=ADVANCED_FACE('',(#1775),#1796,.F.);+#1775=FACE_BOUND('',#1776,.F.);+#1776=EDGE_LOOP('',(#1777,#1778,#1783,#1788,#1793,#543));+#1777=ORIENTED_EDGE('',*,*,#779,.T.);+#1778=ORIENTED_EDGE('',*,*,#1779,.T.);+#1779=EDGE_CURVE('',#775,#1780,#1782,.T.);+#1780=VERTEX_POINT('',#1781);+#1781=CARTESIAN_POINT('',(6.,1.225,1.46));+#1782=LINE('',#776,#27);+#1783=ORIENTED_EDGE('',*,*,#1784,.T.);+#1784=EDGE_CURVE('',#1780,#1785,#1787,.T.);+#1785=VERTEX_POINT('',#1786);+#1786=CARTESIAN_POINT('',(6.,1.225,2.46));+#1787=LINE('',#1781,#34);+#1788=ORIENTED_EDGE('',*,*,#1789,.T.);+#1789=EDGE_CURVE('',#1785,#1790,#1792,.T.);+#1790=VERTEX_POINT('',#1791);+#1791=CARTESIAN_POINT('',(6.,0.575,2.46));+#1792=LINE('',#1786,#27);+#1793=ORIENTED_EDGE('',*,*,#1794,.T.);+#1794=EDGE_CURVE('',#1790,#540,#1795,.T.);+#1795=LINE('',#1791,#56);+#1796=PLANE('',#1797);+#1797=AXIS2_PLACEMENT_3D('',#1798,#488,#76);+#1798=CARTESIAN_POINT('',(6.,1.22787099059,2.3670284193));+#1799=ADVANCED_FACE('',(#1800),#1806,.F.);+#1800=FACE_BOUND('',#1801,.F.);+#1801=EDGE_LOOP('',(#1802,#805,#538,#1805));+#1802=ORIENTED_EDGE('',*,*,#1803,.T.);+#1803=EDGE_CURVE('',#1790,#802,#1804,.T.);+#1804=LINE('',#1791,#110);+#1805=ORIENTED_EDGE('',*,*,#1794,.F.);+#1806=PLANE('',#1807);+#1807=AXIS2_PLACEMENT_3D('',#1791,#562,#57);+#1808=ADVANCED_FACE('',(#1809),#1812,.T.);+#1809=FACE_BOUND('',#1810,.T.);+#1810=EDGE_LOOP('',(#781,#601,#586,#571,#556,#1811));+#1811=ORIENTED_EDGE('',*,*,#524,.T.);+#1812=PLANE('',#1813);+#1813=AXIS2_PLACEMENT_3D('',#1814,#488,#76);+#1814=CARTESIAN_POINT('',(-6.,1.22787099059,2.3670284193));+#1815=ADVANCED_FACE('',(#1816),#1823,.F.);+#1816=FACE_BOUND('',#1817,.F.);+#1817=EDGE_LOOP('',(#1818,#790,#1819,#1822));+#1818=ORIENTED_EDGE('',*,*,#774,.T.);+#1819=ORIENTED_EDGE('',*,*,#1820,.F.);+#1820=EDGE_CURVE('',#1780,#792,#1821,.T.);+#1821=LINE('',#1781,#110);+#1822=ORIENTED_EDGE('',*,*,#1779,.F.);+#1823=PLANE('',#1824);+#1824=AXIS2_PLACEMENT_3D('',#776,#83,#28);+#1825=ADVANCED_FACE('',(#1826),#1832,.T.);+#1826=FACE_BOUND('',#1827,.T.);+#1827=EDGE_LOOP('',(#759,#1548,#1828,#1831));+#1828=ORIENTED_EDGE('',*,*,#1829,.F.);+#1829=EDGE_CURVE('',#1515,#1550,#1830,.T.);+#1830=LINE('',#1516,#110);+#1831=ORIENTED_EDGE('',*,*,#1514,.F.);+#1832=PLANE('',#1833);+#1833=AXIS2_PLACEMENT_3D('',#757,#13,#117);+#1834=ADVANCED_FACE('',(#1835),#1841,.T.);+#1835=FACE_BOUND('',#1836,.T.);+#1836=EDGE_LOOP('',(#745,#1489,#1837,#1840));+#1837=ORIENTED_EDGE('',*,*,#1838,.F.);+#1838=EDGE_CURVE('',#1456,#1491,#1839,.T.);+#1839=LINE('',#1457,#110);+#1840=ORIENTED_EDGE('',*,*,#1455,.F.);+#1841=PLANE('',#1842);+#1842=AXIS2_PLACEMENT_3D('',#743,#13,#117);+#1843=ADVANCED_FACE('',(#1844),#1850,.T.);+#1844=FACE_BOUND('',#1845,.T.);+#1845=EDGE_LOOP('',(#731,#1430,#1846,#1849));+#1846=ORIENTED_EDGE('',*,*,#1847,.F.);+#1847=EDGE_CURVE('',#1397,#1432,#1848,.T.);+#1848=LINE('',#1398,#110);+#1849=ORIENTED_EDGE('',*,*,#1396,.F.);+#1850=PLANE('',#1851);+#1851=AXIS2_PLACEMENT_3D('',#729,#13,#117);+#1852=ADVANCED_FACE('',(#1853),#1859,.T.);+#1853=FACE_BOUND('',#1854,.T.);+#1854=EDGE_LOOP('',(#717,#1371,#1855,#1858));+#1855=ORIENTED_EDGE('',*,*,#1856,.F.);+#1856=EDGE_CURVE('',#1338,#1373,#1857,.T.);+#1857=LINE('',#1339,#110);+#1858=ORIENTED_EDGE('',*,*,#1337,.F.);+#1859=PLANE('',#1860);+#1860=AXIS2_PLACEMENT_3D('',#715,#13,#117);+#1861=ADVANCED_FACE('',(#1862),#1868,.T.);+#1862=FACE_BOUND('',#1863,.T.);+#1863=EDGE_LOOP('',(#703,#1312,#1864,#1867));+#1864=ORIENTED_EDGE('',*,*,#1865,.F.);+#1865=EDGE_CURVE('',#1279,#1314,#1866,.T.);+#1866=LINE('',#1280,#110);+#1867=ORIENTED_EDGE('',*,*,#1278,.F.);+#1868=PLANE('',#1869);+#1869=AXIS2_PLACEMENT_3D('',#701,#13,#117);+#1870=ADVANCED_FACE('',(#1871),#1877,.T.);+#1871=FACE_BOUND('',#1872,.T.);+#1872=EDGE_LOOP('',(#689,#1253,#1873,#1876));+#1873=ORIENTED_EDGE('',*,*,#1874,.F.);+#1874=EDGE_CURVE('',#1220,#1255,#1875,.T.);+#1875=LINE('',#1221,#110);+#1876=ORIENTED_EDGE('',*,*,#1219,.F.);+#1877=PLANE('',#1878);+#1878=AXIS2_PLACEMENT_3D('',#687,#13,#117);+#1879=ADVANCED_FACE('',(#1880),#1886,.T.);+#1880=FACE_BOUND('',#1881,.T.);+#1881=EDGE_LOOP('',(#675,#1194,#1882,#1885));+#1882=ORIENTED_EDGE('',*,*,#1883,.F.);+#1883=EDGE_CURVE('',#1161,#1196,#1884,.T.);+#1884=LINE('',#1162,#110);+#1885=ORIENTED_EDGE('',*,*,#1160,.F.);+#1886=PLANE('',#1887);+#1887=AXIS2_PLACEMENT_3D('',#673,#13,#117);+#1888=ADVANCED_FACE('',(#1889),#1895,.T.);+#1889=FACE_BOUND('',#1890,.T.);+#1890=EDGE_LOOP('',(#661,#1135,#1891,#1894));+#1891=ORIENTED_EDGE('',*,*,#1892,.F.);+#1892=EDGE_CURVE('',#1102,#1137,#1893,.T.);+#1893=LINE('',#1103,#110);+#1894=ORIENTED_EDGE('',*,*,#1101,.F.);+#1895=PLANE('',#1896);+#1896=AXIS2_PLACEMENT_3D('',#659,#13,#117);+#1897=ADVANCED_FACE('',(#1898),#1904,.T.);+#1898=FACE_BOUND('',#1899,.T.);+#1899=EDGE_LOOP('',(#647,#1076,#1900,#1903));+#1900=ORIENTED_EDGE('',*,*,#1901,.F.);+#1901=EDGE_CURVE('',#1043,#1078,#1902,.T.);+#1902=LINE('',#1044,#110);+#1903=ORIENTED_EDGE('',*,*,#1042,.F.);+#1904=PLANE('',#1905);+#1905=AXIS2_PLACEMENT_3D('',#645,#13,#117);+#1906=ADVANCED_FACE('',(#1907),#1913,.T.);+#1907=FACE_BOUND('',#1908,.T.);+#1908=EDGE_LOOP('',(#633,#1017,#1909,#1912));+#1909=ORIENTED_EDGE('',*,*,#1910,.F.);+#1910=EDGE_CURVE('',#984,#1019,#1911,.T.);+#1911=LINE('',#985,#110);+#1912=ORIENTED_EDGE('',*,*,#983,.F.);+#1913=PLANE('',#1914);+#1914=AXIS2_PLACEMENT_3D('',#631,#13,#117);+#1915=ADVANCED_FACE('',(#1916),#1922,.T.);+#1916=FACE_BOUND('',#1917,.T.);+#1917=EDGE_LOOP('',(#619,#958,#1918,#1921));+#1918=ORIENTED_EDGE('',*,*,#1919,.F.);+#1919=EDGE_CURVE('',#923,#960,#1920,.T.);+#1920=LINE('',#924,#110);+#1921=ORIENTED_EDGE('',*,*,#922,.F.);+#1922=PLANE('',#1923);+#1923=AXIS2_PLACEMENT_3D('',#616,#13,#117);+#1924=ADVANCED_FACE('',(#1925),#1937,.F.);+#1925=FACE_BOUND('',#1926,.F.);+#1926=EDGE_LOOP('',(#1927,#1932,#820,#1936));+#1927=ORIENTED_EDGE('',*,*,#1928,.F.);+#1928=EDGE_CURVE('',#1929,#835,#1931,.T.);+#1929=VERTEX_POINT('',#1930);+#1930=CARTESIAN_POINT('',(6.2,-1.975,0.61));+#1931=LINE('',#1930,#116);+#1932=ORIENTED_EDGE('',*,*,#1933,.T.);+#1933=EDGE_CURVE('',#1929,#817,#1934,.T.);+#1934=LINE('',#1935,#110);+#1935=CARTESIAN_POINT('',(6.,-1.975,0.61));+#1936=ORIENTED_EDGE('',*,*,#839,.F.);+#1937=PLANE('',#1938);+#1938=AXIS2_PLACEMENT_3D('',#1935,#35,#76);+#1939=ADVANCED_FACE('',(#1940),#1947,.F.);+#1940=FACE_BOUND('',#1941,.F.);+#1941=EDGE_LOOP('',(#1942,#1945,#815,#1946));+#1942=ORIENTED_EDGE('',*,*,#1943,.F.);+#1943=EDGE_CURVE('',#1611,#1929,#1944,.T.);+#1944=LINE('',#1612,#368);+#1945=ORIENTED_EDGE('',*,*,#1615,.T.);+#1946=ORIENTED_EDGE('',*,*,#1933,.F.);+#1947=PLANE('',#1948);+#1948=AXIS2_PLACEMENT_3D('',#1617,#76,#83);+#1949=ADVANCED_FACE('',(#1950),#1957,.F.);+#1950=FACE_BOUND('',#1951,.F.);+#1951=EDGE_LOOP('',(#1952,#800,#1955,#1956));+#1952=ORIENTED_EDGE('',*,*,#1953,.T.);+#1953=EDGE_CURVE('',#1785,#797,#1954,.T.);+#1954=LINE('',#1786,#110);+#1955=ORIENTED_EDGE('',*,*,#1803,.F.);+#1956=ORIENTED_EDGE('',*,*,#1789,.F.);+#1957=PLANE('',#1958);+#1958=AXIS2_PLACEMENT_3D('',#1786,#83,#28);+#1959=ADVANCED_FACE('',(#1960),#1965,.F.);+#1960=FACE_BOUND('',#1961,.F.);+#1961=EDGE_LOOP('',(#1962,#795,#1963,#1964));+#1962=ORIENTED_EDGE('',*,*,#1820,.T.);+#1963=ORIENTED_EDGE('',*,*,#1953,.F.);+#1964=ORIENTED_EDGE('',*,*,#1784,.F.);+#1965=PLANE('',#1966);+#1966=AXIS2_PLACEMENT_3D('',#1781,#28,#35);+#1967=ADVANCED_FACE('',(#1968),#1977,.F.);+#1968=FACE_BOUND('',#1969,.F.);+#1969=EDGE_LOOP('',(#1598,#1970,#1971,#1972,#1973,#853,#1974));+#1970=ORIENTED_EDGE('',*,*,#1610,.T.);+#1971=ORIENTED_EDGE('',*,*,#1943,.T.);+#1972=ORIENTED_EDGE('',*,*,#1928,.T.);+#1973=ORIENTED_EDGE('',*,*,#834,.T.);+#1974=ORIENTED_EDGE('',*,*,#1975,.T.);+#1975=EDGE_CURVE('',#855,#1595,#1976,.T.);+#1976=LINE('',#856,#870);+#1977=PLANE('',#1978);+#1978=AXIS2_PLACEMENT_3D('',#1979,#879,#369);+#1979=CARTESIAN_POINT('',(6.2,-1.843181818182,0.516818181818));+#1980=ADVANCED_FACE('',(#1981),#1986,.T.);+#1981=FACE_BOUND('',#1982,.T.);+#1982=EDGE_LOOP('',(#1983,#1974,#1984,#1985));+#1983=ORIENTED_EDGE('',*,*,#858,.T.);+#1984=ORIENTED_EDGE('',*,*,#1594,.F.);+#1985=ORIENTED_EDGE('',*,*,#866,.F.);+#1986=PLANE('',#1987);+#1987=AXIS2_PLACEMENT_3D('',#851,#1988,#871);+#1988=DIRECTION('',(0.,5.782411586589E-18,-1.));+#1989=ADVANCED_FACE('',(#1990),#1995,.T.);+#1990=FACE_BOUND('',#1991,.T.);+#1991=EDGE_LOOP('',(#1992,#883,#1993,#1994));+#1992=ORIENTED_EDGE('',*,*,#909,.T.);+#1993=ORIENTED_EDGE('',*,*,#1583,.F.);+#1994=ORIENTED_EDGE('',*,*,#1574,.F.);+#1995=PLANE('',#1996);+#1996=AXIS2_PLACEMENT_3D('',#907,#1988,#871);+#1997=ADVANCED_FACE('',(#1998),#2005,.T.);+#1998=FACE_BOUND('',#1999,.T.);+#1999=EDGE_LOOP('',(#2000,#963,#2001,#2004));+#2000=ORIENTED_EDGE('',*,*,#1919,.T.);+#2001=ORIENTED_EDGE('',*,*,#2002,.F.);+#2002=EDGE_CURVE('',#928,#965,#2003,.T.);+#2003=LINE('',#929,#110);+#2004=ORIENTED_EDGE('',*,*,#927,.F.);+#2005=PLANE('',#2006);+#2006=AXIS2_PLACEMENT_3D('',#924,#117,#369);+#2007=ADVANCED_FACE('',(#2008),#2013,.T.);+#2008=FACE_BOUND('',#2009,.T.);+#2009=EDGE_LOOP('',(#2010,#968,#2011,#2012));+#2010=ORIENTED_EDGE('',*,*,#2002,.T.);+#2011=ORIENTED_EDGE('',*,*,#943,.F.);+#2012=ORIENTED_EDGE('',*,*,#932,.F.);+#2013=PLANE('',#2014);+#2014=AXIS2_PLACEMENT_3D('',#929,#369,#935);+#2015=ADVANCED_FACE('',(#2016),#2023,.T.);+#2016=FACE_BOUND('',#2017,.T.);+#2017=EDGE_LOOP('',(#2018,#1022,#2019,#2022));+#2018=ORIENTED_EDGE('',*,*,#1910,.T.);+#2019=ORIENTED_EDGE('',*,*,#2020,.F.);+#2020=EDGE_CURVE('',#989,#1024,#2021,.T.);+#2021=LINE('',#990,#110);+#2022=ORIENTED_EDGE('',*,*,#988,.F.);+#2023=PLANE('',#2024);+#2024=AXIS2_PLACEMENT_3D('',#985,#117,#369);+#2025=ADVANCED_FACE('',(#2026),#2031,.T.);+#2026=FACE_BOUND('',#2027,.T.);+#2027=EDGE_LOOP('',(#2028,#1027,#2029,#2030));+#2028=ORIENTED_EDGE('',*,*,#2020,.T.);+#2029=ORIENTED_EDGE('',*,*,#1002,.F.);+#2030=ORIENTED_EDGE('',*,*,#993,.F.);+#2031=PLANE('',#2032);+#2032=AXIS2_PLACEMENT_3D('',#990,#369,#935);+#2033=ADVANCED_FACE('',(#2034),#2041,.T.);+#2034=FACE_BOUND('',#2035,.T.);+#2035=EDGE_LOOP('',(#2036,#1081,#2037,#2040));+#2036=ORIENTED_EDGE('',*,*,#1901,.T.);+#2037=ORIENTED_EDGE('',*,*,#2038,.F.);+#2038=EDGE_CURVE('',#1048,#1083,#2039,.T.);+#2039=LINE('',#1049,#110);+#2040=ORIENTED_EDGE('',*,*,#1047,.F.);+#2041=PLANE('',#2042);+#2042=AXIS2_PLACEMENT_3D('',#1044,#117,#369);+#2043=ADVANCED_FACE('',(#2044),#2049,.T.);+#2044=FACE_BOUND('',#2045,.T.);+#2045=EDGE_LOOP('',(#2046,#1086,#2047,#2048));+#2046=ORIENTED_EDGE('',*,*,#2038,.T.);+#2047=ORIENTED_EDGE('',*,*,#1061,.F.);+#2048=ORIENTED_EDGE('',*,*,#1052,.F.);+#2049=PLANE('',#2050);+#2050=AXIS2_PLACEMENT_3D('',#1049,#369,#935);+#2051=ADVANCED_FACE('',(#2052),#2059,.T.);+#2052=FACE_BOUND('',#2053,.T.);+#2053=EDGE_LOOP('',(#2054,#1140,#2055,#2058));+#2054=ORIENTED_EDGE('',*,*,#1892,.T.);+#2055=ORIENTED_EDGE('',*,*,#2056,.F.);+#2056=EDGE_CURVE('',#1107,#1142,#2057,.T.);+#2057=LINE('',#1108,#110);+#2058=ORIENTED_EDGE('',*,*,#1106,.F.);+#2059=PLANE('',#2060);+#2060=AXIS2_PLACEMENT_3D('',#1103,#117,#369);+#2061=ADVANCED_FACE('',(#2062),#2067,.T.);+#2062=FACE_BOUND('',#2063,.T.);+#2063=EDGE_LOOP('',(#2064,#1145,#2065,#2066));+#2064=ORIENTED_EDGE('',*,*,#2056,.T.);+#2065=ORIENTED_EDGE('',*,*,#1120,.F.);+#2066=ORIENTED_EDGE('',*,*,#1111,.F.);+#2067=PLANE('',#2068);+#2068=AXIS2_PLACEMENT_3D('',#1108,#369,#935);+#2069=ADVANCED_FACE('',(#2070),#2077,.T.);+#2070=FACE_BOUND('',#2071,.T.);+#2071=EDGE_LOOP('',(#2072,#1199,#2073,#2076));+#2072=ORIENTED_EDGE('',*,*,#1883,.T.);+#2073=ORIENTED_EDGE('',*,*,#2074,.F.);+#2074=EDGE_CURVE('',#1166,#1201,#2075,.T.);+#2075=LINE('',#1167,#110);+#2076=ORIENTED_EDGE('',*,*,#1165,.F.);+#2077=PLANE('',#2078);+#2078=AXIS2_PLACEMENT_3D('',#1162,#117,#369);+#2079=ADVANCED_FACE('',(#2080),#2085,.T.);+#2080=FACE_BOUND('',#2081,.T.);+#2081=EDGE_LOOP('',(#2082,#1204,#2083,#2084));+#2082=ORIENTED_EDGE('',*,*,#2074,.T.);+#2083=ORIENTED_EDGE('',*,*,#1179,.F.);+#2084=ORIENTED_EDGE('',*,*,#1170,.F.);+#2085=PLANE('',#2086);+#2086=AXIS2_PLACEMENT_3D('',#1167,#369,#935);+#2087=ADVANCED_FACE('',(#2088),#2095,.T.);+#2088=FACE_BOUND('',#2089,.T.);+#2089=EDGE_LOOP('',(#2090,#1258,#2091,#2094));+#2090=ORIENTED_EDGE('',*,*,#1874,.T.);+#2091=ORIENTED_EDGE('',*,*,#2092,.F.);+#2092=EDGE_CURVE('',#1225,#1260,#2093,.T.);+#2093=LINE('',#1226,#110);+#2094=ORIENTED_EDGE('',*,*,#1224,.F.);+#2095=PLANE('',#2096);+#2096=AXIS2_PLACEMENT_3D('',#1221,#117,#369);+#2097=ADVANCED_FACE('',(#2098),#2103,.T.);+#2098=FACE_BOUND('',#2099,.T.);+#2099=EDGE_LOOP('',(#2100,#1263,#2101,#2102));+#2100=ORIENTED_EDGE('',*,*,#2092,.T.);+#2101=ORIENTED_EDGE('',*,*,#1238,.F.);+#2102=ORIENTED_EDGE('',*,*,#1229,.F.);+#2103=PLANE('',#2104);+#2104=AXIS2_PLACEMENT_3D('',#1226,#369,#935);+#2105=ADVANCED_FACE('',(#2106),#2113,.T.);+#2106=FACE_BOUND('',#2107,.T.);+#2107=EDGE_LOOP('',(#2108,#1317,#2109,#2112));+#2108=ORIENTED_EDGE('',*,*,#1865,.T.);+#2109=ORIENTED_EDGE('',*,*,#2110,.F.);+#2110=EDGE_CURVE('',#1284,#1319,#2111,.T.);+#2111=LINE('',#1285,#110);+#2112=ORIENTED_EDGE('',*,*,#1283,.F.);+#2113=PLANE('',#2114);+#2114=AXIS2_PLACEMENT_3D('',#1280,#117,#369);+#2115=ADVANCED_FACE('',(#2116),#2121,.T.);+#2116=FACE_BOUND('',#2117,.T.);+#2117=EDGE_LOOP('',(#2118,#1322,#2119,#2120));+#2118=ORIENTED_EDGE('',*,*,#2110,.T.);+#2119=ORIENTED_EDGE('',*,*,#1297,.F.);+#2120=ORIENTED_EDGE('',*,*,#1288,.F.);+#2121=PLANE('',#2122);+#2122=AXIS2_PLACEMENT_3D('',#1285,#369,#935);+#2123=ADVANCED_FACE('',(#2124),#2131,.T.);+#2124=FACE_BOUND('',#2125,.T.);+#2125=EDGE_LOOP('',(#2126,#1376,#2127,#2130));+#2126=ORIENTED_EDGE('',*,*,#1856,.T.);+#2127=ORIENTED_EDGE('',*,*,#2128,.F.);+#2128=EDGE_CURVE('',#1343,#1378,#2129,.T.);+#2129=LINE('',#1344,#110);+#2130=ORIENTED_EDGE('',*,*,#1342,.F.);+#2131=PLANE('',#2132);+#2132=AXIS2_PLACEMENT_3D('',#1339,#117,#369);+#2133=ADVANCED_FACE('',(#2134),#2139,.T.);+#2134=FACE_BOUND('',#2135,.T.);+#2135=EDGE_LOOP('',(#2136,#1381,#2137,#2138));+#2136=ORIENTED_EDGE('',*,*,#2128,.T.);+#2137=ORIENTED_EDGE('',*,*,#1356,.F.);+#2138=ORIENTED_EDGE('',*,*,#1347,.F.);+#2139=PLANE('',#2140);+#2140=AXIS2_PLACEMENT_3D('',#1344,#369,#935);+#2141=ADVANCED_FACE('',(#2142),#2149,.T.);+#2142=FACE_BOUND('',#2143,.T.);+#2143=EDGE_LOOP('',(#2144,#1435,#2145,#2148));+#2144=ORIENTED_EDGE('',*,*,#1847,.T.);+#2145=ORIENTED_EDGE('',*,*,#2146,.F.);+#2146=EDGE_CURVE('',#1402,#1437,#2147,.T.);+#2147=LINE('',#1403,#110);+#2148=ORIENTED_EDGE('',*,*,#1401,.F.);+#2149=PLANE('',#2150);+#2150=AXIS2_PLACEMENT_3D('',#1398,#117,#369);+#2151=ADVANCED_FACE('',(#2152),#2157,.T.);+#2152=FACE_BOUND('',#2153,.T.);+#2153=EDGE_LOOP('',(#2154,#1440,#2155,#2156));+#2154=ORIENTED_EDGE('',*,*,#2146,.T.);+#2155=ORIENTED_EDGE('',*,*,#1415,.F.);+#2156=ORIENTED_EDGE('',*,*,#1406,.F.);+#2157=PLANE('',#2158);+#2158=AXIS2_PLACEMENT_3D('',#1403,#369,#935);+#2159=ADVANCED_FACE('',(#2160),#2167,.T.);+#2160=FACE_BOUND('',#2161,.T.);+#2161=EDGE_LOOP('',(#2162,#1494,#2163,#2166));+#2162=ORIENTED_EDGE('',*,*,#1838,.T.);+#2163=ORIENTED_EDGE('',*,*,#2164,.F.);+#2164=EDGE_CURVE('',#1461,#1496,#2165,.T.);+#2165=LINE('',#1462,#110);+#2166=ORIENTED_EDGE('',*,*,#1460,.F.);+#2167=PLANE('',#2168);+#2168=AXIS2_PLACEMENT_3D('',#1457,#117,#369);+#2169=ADVANCED_FACE('',(#2170),#2175,.T.);+#2170=FACE_BOUND('',#2171,.T.);+#2171=EDGE_LOOP('',(#2172,#1499,#2173,#2174));+#2172=ORIENTED_EDGE('',*,*,#2164,.T.);+#2173=ORIENTED_EDGE('',*,*,#1474,.F.);+#2174=ORIENTED_EDGE('',*,*,#1465,.F.);+#2175=PLANE('',#2176);+#2176=AXIS2_PLACEMENT_3D('',#1462,#369,#935);+#2177=ADVANCED_FACE('',(#2178),#2185,.T.);+#2178=FACE_BOUND('',#2179,.T.);+#2179=EDGE_LOOP('',(#2180,#1553,#2181,#2184));+#2180=ORIENTED_EDGE('',*,*,#1829,.T.);+#2181=ORIENTED_EDGE('',*,*,#2182,.F.);+#2182=EDGE_CURVE('',#1520,#1555,#2183,.T.);+#2183=LINE('',#1521,#110);+#2184=ORIENTED_EDGE('',*,*,#1519,.F.);+#2185=PLANE('',#2186);+#2186=AXIS2_PLACEMENT_3D('',#1516,#117,#369);+#2187=ADVANCED_FACE('',(#2188),#2193,.T.);+#2188=FACE_BOUND('',#2189,.T.);+#2189=EDGE_LOOP('',(#2190,#1558,#2191,#2192));+#2190=ORIENTED_EDGE('',*,*,#2182,.T.);+#2191=ORIENTED_EDGE('',*,*,#1533,.F.);+#2192=ORIENTED_EDGE('',*,*,#1524,.F.);+#2193=PLANE('',#2194);+#2194=AXIS2_PLACEMENT_3D('',#1521,#369,#935);+#2195=ADVANCED_FACE('',(#2196),#2198,.T.);+#2196=FACE_BOUND('',#2197,.T.);+#2197=EDGE_LOOP('',(#1656,#1671,#1685,#1641));+#2198=PLANE('',#2199);+#2199=AXIS2_PLACEMENT_3D('',#2200,#28,#94);+#2200=CARTESIAN_POINT('',(0.,-7.5E-02,1.76));+#2201=ADVANCED_FACE('',(#2202,#2204,#2226,#2248,#2270,#2292,#2314,#2336,#2358,#2380,#2402,#2424),#2446,.T.);+#2202=FACE_BOUND('',#2203,.T.);+#2203=EDGE_LOOP('',(#1628,#1695,#1709,#1768));+#2204=FACE_BOUND('',#2205,.T.);+#2205=EDGE_LOOP('',(#2206,#2213,#2218,#2223));+#2206=ORIENTED_EDGE('',*,*,#2207,.F.);+#2207=EDGE_CURVE('',#2208,#2210,#2212,.T.);+#2208=VERTEX_POINT('',#2209);+#2209=CARTESIAN_POINT('',(-5.1,0.525,1.66));+#2210=VERTEX_POINT('',#2211);+#2211=CARTESIAN_POINT('',(-4.9,0.525,1.66));+#2212=LINE('',#2209,#110);+#2213=ORIENTED_EDGE('',*,*,#2214,.F.);+#2214=EDGE_CURVE('',#2215,#2208,#2217,.T.);+#2215=VERTEX_POINT('',#2216);+#2216=CARTESIAN_POINT('',(-5.1,0.525,2.14));+#2217=LINE('',#2216,#368);+#2218=ORIENTED_EDGE('',*,*,#2219,.T.);+#2219=EDGE_CURVE('',#2215,#2220,#2222,.T.);+#2220=VERTEX_POINT('',#2221);+#2221=CARTESIAN_POINT('',(-4.9,0.525,2.14));+#2222=LINE('',#2216,#110);+#2223=ORIENTED_EDGE('',*,*,#2224,.T.);+#2224=EDGE_CURVE('',#2220,#2210,#2225,.T.);+#2225=LINE('',#2221,#368);+#2226=FACE_BOUND('',#2227,.T.);+#2227=EDGE_LOOP('',(#2228,#2235,#2240,#2245));+#2228=ORIENTED_EDGE('',*,*,#2229,.F.);+#2229=EDGE_CURVE('',#2230,#2232,#2234,.T.);+#2230=VERTEX_POINT('',#2231);+#2231=CARTESIAN_POINT('',(-4.1,0.525,2.14));+#2232=VERTEX_POINT('',#2233);+#2233=CARTESIAN_POINT('',(-4.1,0.525,1.66));+#2234=LINE('',#2231,#368);+#2235=ORIENTED_EDGE('',*,*,#2236,.T.);+#2236=EDGE_CURVE('',#2230,#2237,#2239,.T.);+#2237=VERTEX_POINT('',#2238);+#2238=CARTESIAN_POINT('',(-3.9,0.525,2.14));+#2239=LINE('',#2231,#110);+#2240=ORIENTED_EDGE('',*,*,#2241,.T.);+#2241=EDGE_CURVE('',#2237,#2242,#2244,.T.);+#2242=VERTEX_POINT('',#2243);+#2243=CARTESIAN_POINT('',(-3.9,0.525,1.66));+#2244=LINE('',#2238,#368);+#2245=ORIENTED_EDGE('',*,*,#2246,.F.);+#2246=EDGE_CURVE('',#2232,#2242,#2247,.T.);+#2247=LINE('',#2233,#110);+#2248=FACE_BOUND('',#2249,.T.);+#2249=EDGE_LOOP('',(#2250,#2257,#2262,#2267));+#2250=ORIENTED_EDGE('',*,*,#2251,.F.);+#2251=EDGE_CURVE('',#2252,#2254,#2256,.T.);+#2252=VERTEX_POINT('',#2253);+#2253=CARTESIAN_POINT('',(-3.1,0.525,2.14));+#2254=VERTEX_POINT('',#2255);+#2255=CARTESIAN_POINT('',(-3.1,0.525,1.66));+#2256=LINE('',#2253,#368);+#2257=ORIENTED_EDGE('',*,*,#2258,.T.);+#2258=EDGE_CURVE('',#2252,#2259,#2261,.T.);+#2259=VERTEX_POINT('',#2260);+#2260=CARTESIAN_POINT('',(-2.9,0.525,2.14));+#2261=LINE('',#2253,#110);+#2262=ORIENTED_EDGE('',*,*,#2263,.T.);+#2263=EDGE_CURVE('',#2259,#2264,#2266,.T.);+#2264=VERTEX_POINT('',#2265);+#2265=CARTESIAN_POINT('',(-2.9,0.525,1.66));+#2266=LINE('',#2260,#368);+#2267=ORIENTED_EDGE('',*,*,#2268,.F.);+#2268=EDGE_CURVE('',#2254,#2264,#2269,.T.);+#2269=LINE('',#2255,#110);+#2270=FACE_BOUND('',#2271,.T.);+#2271=EDGE_LOOP('',(#2272,#2279,#2284,#2289));+#2272=ORIENTED_EDGE('',*,*,#2273,.F.);+#2273=EDGE_CURVE('',#2274,#2276,#2278,.T.);+#2274=VERTEX_POINT('',#2275);+#2275=CARTESIAN_POINT('',(-2.1,0.525,2.14));+#2276=VERTEX_POINT('',#2277);+#2277=CARTESIAN_POINT('',(-2.1,0.525,1.66));+#2278=LINE('',#2275,#368);+#2279=ORIENTED_EDGE('',*,*,#2280,.T.);+#2280=EDGE_CURVE('',#2274,#2281,#2283,.T.);+#2281=VERTEX_POINT('',#2282);+#2282=CARTESIAN_POINT('',(-1.9,0.525,2.14));+#2283=LINE('',#2275,#110);+#2284=ORIENTED_EDGE('',*,*,#2285,.T.);+#2285=EDGE_CURVE('',#2281,#2286,#2288,.T.);+#2286=VERTEX_POINT('',#2287);+#2287=CARTESIAN_POINT('',(-1.9,0.525,1.66));+#2288=LINE('',#2282,#368);+#2289=ORIENTED_EDGE('',*,*,#2290,.F.);+#2290=EDGE_CURVE('',#2276,#2286,#2291,.T.);+#2291=LINE('',#2277,#110);+#2292=FACE_BOUND('',#2293,.T.);+#2293=EDGE_LOOP('',(#2294,#2301,#2306,#2311));+#2294=ORIENTED_EDGE('',*,*,#2295,.F.);+#2295=EDGE_CURVE('',#2296,#2298,#2300,.T.);+#2296=VERTEX_POINT('',#2297);+#2297=CARTESIAN_POINT('',(-1.1,0.525,2.14));+#2298=VERTEX_POINT('',#2299);+#2299=CARTESIAN_POINT('',(-1.1,0.525,1.66));+#2300=LINE('',#2297,#368);+#2301=ORIENTED_EDGE('',*,*,#2302,.T.);+#2302=EDGE_CURVE('',#2296,#2303,#2305,.T.);+#2303=VERTEX_POINT('',#2304);+#2304=CARTESIAN_POINT('',(-0.9,0.525,2.14));+#2305=LINE('',#2297,#110);+#2306=ORIENTED_EDGE('',*,*,#2307,.T.);+#2307=EDGE_CURVE('',#2303,#2308,#2310,.T.);+#2308=VERTEX_POINT('',#2309);+#2309=CARTESIAN_POINT('',(-0.9,0.525,1.66));+#2310=LINE('',#2304,#368);+#2311=ORIENTED_EDGE('',*,*,#2312,.F.);+#2312=EDGE_CURVE('',#2298,#2308,#2313,.T.);+#2313=LINE('',#2299,#110);+#2314=FACE_BOUND('',#2315,.T.);+#2315=EDGE_LOOP('',(#2316,#2323,#2328,#2333));+#2316=ORIENTED_EDGE('',*,*,#2317,.F.);+#2317=EDGE_CURVE('',#2318,#2320,#2322,.T.);+#2318=VERTEX_POINT('',#2319);+#2319=CARTESIAN_POINT('',(-1.E-01,0.525,2.14));+#2320=VERTEX_POINT('',#2321);+#2321=CARTESIAN_POINT('',(-1.E-01,0.525,1.66));+#2322=LINE('',#2319,#368);+#2323=ORIENTED_EDGE('',*,*,#2324,.T.);+#2324=EDGE_CURVE('',#2318,#2325,#2327,.T.);+#2325=VERTEX_POINT('',#2326);+#2326=CARTESIAN_POINT('',(0.1,0.525,2.14));+#2327=LINE('',#2319,#110);+#2328=ORIENTED_EDGE('',*,*,#2329,.T.);+#2329=EDGE_CURVE('',#2325,#2330,#2332,.T.);+#2330=VERTEX_POINT('',#2331);+#2331=CARTESIAN_POINT('',(0.1,0.525,1.66));+#2332=LINE('',#2326,#368);+#2333=ORIENTED_EDGE('',*,*,#2334,.F.);+#2334=EDGE_CURVE('',#2320,#2330,#2335,.T.);+#2335=LINE('',#2321,#110);+#2336=FACE_BOUND('',#2337,.T.);+#2337=EDGE_LOOP('',(#2338,#2345,#2350,#2355));+#2338=ORIENTED_EDGE('',*,*,#2339,.F.);+#2339=EDGE_CURVE('',#2340,#2342,#2344,.T.);+#2340=VERTEX_POINT('',#2341);+#2341=CARTESIAN_POINT('',(0.9,0.525,2.14));+#2342=VERTEX_POINT('',#2343);+#2343=CARTESIAN_POINT('',(0.9,0.525,1.66));+#2344=LINE('',#2341,#368);+#2345=ORIENTED_EDGE('',*,*,#2346,.T.);+#2346=EDGE_CURVE('',#2340,#2347,#2349,.T.);+#2347=VERTEX_POINT('',#2348);+#2348=CARTESIAN_POINT('',(1.1,0.525,2.14));+#2349=LINE('',#2341,#110);+#2350=ORIENTED_EDGE('',*,*,#2351,.T.);+#2351=EDGE_CURVE('',#2347,#2352,#2354,.T.);+#2352=VERTEX_POINT('',#2353);+#2353=CARTESIAN_POINT('',(1.1,0.525,1.66));+#2354=LINE('',#2348,#368);+#2355=ORIENTED_EDGE('',*,*,#2356,.F.);+#2356=EDGE_CURVE('',#2342,#2352,#2357,.T.);+#2357=LINE('',#2343,#110);+#2358=FACE_BOUND('',#2359,.T.);+#2359=EDGE_LOOP('',(#2360,#2367,#2372,#2377));+#2360=ORIENTED_EDGE('',*,*,#2361,.F.);+#2361=EDGE_CURVE('',#2362,#2364,#2366,.T.);+#2362=VERTEX_POINT('',#2363);+#2363=CARTESIAN_POINT('',(1.9,0.525,2.14));+#2364=VERTEX_POINT('',#2365);+#2365=CARTESIAN_POINT('',(1.9,0.525,1.66));+#2366=LINE('',#2363,#368);+#2367=ORIENTED_EDGE('',*,*,#2368,.T.);+#2368=EDGE_CURVE('',#2362,#2369,#2371,.T.);+#2369=VERTEX_POINT('',#2370);+#2370=CARTESIAN_POINT('',(2.1,0.525,2.14));+#2371=LINE('',#2363,#110);+#2372=ORIENTED_EDGE('',*,*,#2373,.T.);+#2373=EDGE_CURVE('',#2369,#2374,#2376,.T.);+#2374=VERTEX_POINT('',#2375);+#2375=CARTESIAN_POINT('',(2.1,0.525,1.66));+#2376=LINE('',#2370,#368);+#2377=ORIENTED_EDGE('',*,*,#2378,.F.);+#2378=EDGE_CURVE('',#2364,#2374,#2379,.T.);+#2379=LINE('',#2365,#110);+#2380=FACE_BOUND('',#2381,.T.);+#2381=EDGE_LOOP('',(#2382,#2389,#2394,#2399));+#2382=ORIENTED_EDGE('',*,*,#2383,.F.);+#2383=EDGE_CURVE('',#2384,#2386,#2388,.T.);+#2384=VERTEX_POINT('',#2385);+#2385=CARTESIAN_POINT('',(2.9,0.525,2.14));+#2386=VERTEX_POINT('',#2387);+#2387=CARTESIAN_POINT('',(2.9,0.525,1.66));+#2388=LINE('',#2385,#368);+#2389=ORIENTED_EDGE('',*,*,#2390,.T.);+#2390=EDGE_CURVE('',#2384,#2391,#2393,.T.);+#2391=VERTEX_POINT('',#2392);+#2392=CARTESIAN_POINT('',(3.1,0.525,2.14));+#2393=LINE('',#2385,#110);+#2394=ORIENTED_EDGE('',*,*,#2395,.T.);+#2395=EDGE_CURVE('',#2391,#2396,#2398,.T.);+#2396=VERTEX_POINT('',#2397);+#2397=CARTESIAN_POINT('',(3.1,0.525,1.66));+#2398=LINE('',#2392,#368);+#2399=ORIENTED_EDGE('',*,*,#2400,.F.);+#2400=EDGE_CURVE('',#2386,#2396,#2401,.T.);+#2401=LINE('',#2387,#110);+#2402=FACE_BOUND('',#2403,.T.);+#2403=EDGE_LOOP('',(#2404,#2411,#2416,#2421));+#2404=ORIENTED_EDGE('',*,*,#2405,.F.);+#2405=EDGE_CURVE('',#2406,#2408,#2410,.T.);+#2406=VERTEX_POINT('',#2407);+#2407=CARTESIAN_POINT('',(3.9,0.525,2.14));+#2408=VERTEX_POINT('',#2409);+#2409=CARTESIAN_POINT('',(3.9,0.525,1.66));+#2410=LINE('',#2407,#368);+#2411=ORIENTED_EDGE('',*,*,#2412,.T.);+#2412=EDGE_CURVE('',#2406,#2413,#2415,.T.);+#2413=VERTEX_POINT('',#2414);+#2414=CARTESIAN_POINT('',(4.1,0.525,2.14));+#2415=LINE('',#2407,#110);+#2416=ORIENTED_EDGE('',*,*,#2417,.T.);+#2417=EDGE_CURVE('',#2413,#2418,#2420,.T.);+#2418=VERTEX_POINT('',#2419);+#2419=CARTESIAN_POINT('',(4.1,0.525,1.66));+#2420=LINE('',#2414,#368);+#2421=ORIENTED_EDGE('',*,*,#2422,.F.);+#2422=EDGE_CURVE('',#2408,#2418,#2423,.T.);+#2423=LINE('',#2409,#110);+#2424=FACE_BOUND('',#2425,.T.);+#2425=EDGE_LOOP('',(#2426,#2433,#2438,#2443));+#2426=ORIENTED_EDGE('',*,*,#2427,.F.);+#2427=EDGE_CURVE('',#2428,#2430,#2432,.T.);+#2428=VERTEX_POINT('',#2429);+#2429=CARTESIAN_POINT('',(4.9,0.525,2.14));+#2430=VERTEX_POINT('',#2431);+#2431=CARTESIAN_POINT('',(4.9,0.525,1.66));+#2432=LINE('',#2429,#368);+#2433=ORIENTED_EDGE('',*,*,#2434,.T.);+#2434=EDGE_CURVE('',#2428,#2435,#2437,.T.);+#2435=VERTEX_POINT('',#2436);+#2436=CARTESIAN_POINT('',(5.1,0.525,2.14));+#2437=LINE('',#2429,#110);+#2438=ORIENTED_EDGE('',*,*,#2439,.T.);+#2439=EDGE_CURVE('',#2435,#2440,#2442,.T.);+#2440=VERTEX_POINT('',#2441);+#2441=CARTESIAN_POINT('',(5.1,0.525,1.66));+#2442=LINE('',#2436,#368);+#2443=ORIENTED_EDGE('',*,*,#2444,.F.);+#2444=EDGE_CURVE('',#2430,#2440,#2445,.T.);+#2445=LINE('',#2431,#110);+#2446=PLANE('',#2447);+#2447=AXIS2_PLACEMENT_3D('',#2448,#28,#94);+#2448=CARTESIAN_POINT('',(0.,0.525,1.51));+#2449=ADVANCED_FACE('',(#2450),#2198,.T.);+#2450=FACE_BOUND('',#2451,.T.);+#2451=EDGE_LOOP('',(#1761,#1722,#1737,#1748));+#2452=ADVANCED_FACE('',(#2453),#2471,.T.);+#2453=FACE_BOUND('',#2454,.T.);+#2454=EDGE_LOOP('',(#2455,#2456,#2463,#2468));+#2455=ORIENTED_EDGE('',*,*,#2207,.T.);+#2456=ORIENTED_EDGE('',*,*,#2457,.T.);+#2457=EDGE_CURVE('',#2210,#2458,#2460,.T.);+#2458=VERTEX_POINT('',#2459);+#2459=CARTESIAN_POINT('',(-4.9,-1.225,1.79));+#2460=LINE('',#2211,#2461);+#2461=VECTOR('',#2462,1.);+#2462=DIRECTION('',(0.,-0.997252183706,7.408159078958E-02));+#2463=ORIENTED_EDGE('',*,*,#2464,.F.);+#2464=EDGE_CURVE('',#2465,#2458,#2467,.T.);+#2465=VERTEX_POINT('',#2466);+#2466=CARTESIAN_POINT('',(-5.1,-1.225,1.79));+#2467=LINE('',#2466,#110);+#2468=ORIENTED_EDGE('',*,*,#2469,.F.);+#2469=EDGE_CURVE('',#2208,#2465,#2470,.T.);+#2470=LINE('',#2209,#2461);+#2471=PLANE('',#2472);+#2472=AXIS2_PLACEMENT_3D('',#2209,#2473,#2462);+#2473=DIRECTION('',(0.,-7.408159078958E-02,-0.997252183706));+#2474=ADVANCED_FACE('',(#2475),#2485,.F.);+#2475=FACE_BOUND('',#2476,.F.);+#2476=EDGE_LOOP('',(#2477,#2482,#2223,#2456));+#2477=ORIENTED_EDGE('',*,*,#2478,.T.);+#2478=EDGE_CURVE('',#2458,#2479,#2481,.T.);+#2479=VERTEX_POINT('',#2480);+#2480=CARTESIAN_POINT('',(-4.9,-1.225,2.14));+#2481=LINE('',#2459,#618);+#2482=ORIENTED_EDGE('',*,*,#2483,.T.);+#2483=EDGE_CURVE('',#2479,#2220,#2484,.T.);+#2484=LINE('',#2480,#116);+#2485=PLANE('',#2486);+#2486=AXIS2_PLACEMENT_3D('',#2487,#879,#369);+#2487=CARTESIAN_POINT('',(-4.9,-0.323759014354,1.931294517928));+#2488=ADVANCED_FACE('',(#2489),#2500,.T.);+#2489=FACE_BOUND('',#2490,.T.);+#2490=EDGE_LOOP('',(#2491,#2482,#2496,#2497));+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2493,#2479,#2495,.T.);+#2493=VERTEX_POINT('',#2494);+#2494=CARTESIAN_POINT('',(-5.1,-1.225,2.14));+#2495=LINE('',#2494,#110);+#2496=ORIENTED_EDGE('',*,*,#2219,.F.);+#2497=ORIENTED_EDGE('',*,*,#2498,.F.);+#2498=EDGE_CURVE('',#2493,#2215,#2499,.T.);+#2499=LINE('',#2494,#116);+#2500=PLANE('',#2501);+#2501=AXIS2_PLACEMENT_3D('',#2494,#13,#117);+#2502=ADVANCED_FACE('',(#2503),#2511,.T.);+#2503=FACE_BOUND('',#2504,.T.);+#2504=EDGE_LOOP('',(#2505,#2508,#2509,#2510));+#2505=ORIENTED_EDGE('',*,*,#2506,.T.);+#2506=EDGE_CURVE('',#2465,#2493,#2507,.T.);+#2507=LINE('',#2466,#618);+#2508=ORIENTED_EDGE('',*,*,#2498,.T.);+#2509=ORIENTED_EDGE('',*,*,#2214,.T.);+#2510=ORIENTED_EDGE('',*,*,#2469,.T.);+#2511=PLANE('',#2512);+#2512=AXIS2_PLACEMENT_3D('',#2513,#879,#369);+#2513=CARTESIAN_POINT('',(-5.1,-0.323759014354,1.931294517928));+#2514=ADVANCED_FACE('',(#2515),#2531,.T.);+#2515=FACE_BOUND('',#2516,.T.);+#2516=EDGE_LOOP('',(#2517,#2524,#2527,#2528));+#2517=ORIENTED_EDGE('',*,*,#2518,.T.);+#2518=EDGE_CURVE('',#2519,#2521,#2523,.T.);+#2519=VERTEX_POINT('',#2520);+#2520=CARTESIAN_POINT('',(-4.1,-1.225,1.79));+#2521=VERTEX_POINT('',#2522);+#2522=CARTESIAN_POINT('',(-4.1,-1.225,2.14));+#2523=LINE('',#2520,#618);+#2524=ORIENTED_EDGE('',*,*,#2525,.T.);+#2525=EDGE_CURVE('',#2521,#2230,#2526,.T.);+#2526=LINE('',#2522,#116);+#2527=ORIENTED_EDGE('',*,*,#2229,.T.);+#2528=ORIENTED_EDGE('',*,*,#2529,.T.);+#2529=EDGE_CURVE('',#2232,#2519,#2530,.T.);+#2530=LINE('',#2233,#2461);+#2531=PLANE('',#2532);+#2532=AXIS2_PLACEMENT_3D('',#2533,#879,#369);+#2533=CARTESIAN_POINT('',(-4.1,-0.323759014354,1.931294517928));+#2534=ADVANCED_FACE('',(#2535),#2547,.T.);+#2535=FACE_BOUND('',#2536,.T.);+#2536=EDGE_LOOP('',(#2537,#2538,#2543,#2546));+#2537=ORIENTED_EDGE('',*,*,#2246,.T.);+#2538=ORIENTED_EDGE('',*,*,#2539,.T.);+#2539=EDGE_CURVE('',#2242,#2540,#2542,.T.);+#2540=VERTEX_POINT('',#2541);+#2541=CARTESIAN_POINT('',(-3.9,-1.225,1.79));+#2542=LINE('',#2243,#2461);+#2543=ORIENTED_EDGE('',*,*,#2544,.F.);+#2544=EDGE_CURVE('',#2519,#2540,#2545,.T.);+#2545=LINE('',#2520,#110);+#2546=ORIENTED_EDGE('',*,*,#2529,.F.);+#2547=PLANE('',#2548);+#2548=AXIS2_PLACEMENT_3D('',#2233,#2473,#2462);+#2549=ADVANCED_FACE('',(#2550),#2560,.F.);+#2550=FACE_BOUND('',#2551,.F.);+#2551=EDGE_LOOP('',(#2552,#2557,#2240,#2538));+#2552=ORIENTED_EDGE('',*,*,#2553,.T.);+#2553=EDGE_CURVE('',#2540,#2554,#2556,.T.);+#2554=VERTEX_POINT('',#2555);+#2555=CARTESIAN_POINT('',(-3.9,-1.225,2.14));+#2556=LINE('',#2541,#618);+#2557=ORIENTED_EDGE('',*,*,#2558,.T.);+#2558=EDGE_CURVE('',#2554,#2237,#2559,.T.);+#2559=LINE('',#2555,#116);+#2560=PLANE('',#2561);+#2561=AXIS2_PLACEMENT_3D('',#2562,#879,#369);+#2562=CARTESIAN_POINT('',(-3.9,-0.323759014354,1.931294517928));+#2563=ADVANCED_FACE('',(#2564),#2571,.T.);+#2564=FACE_BOUND('',#2565,.T.);+#2565=EDGE_LOOP('',(#2566,#2557,#2569,#2570));+#2566=ORIENTED_EDGE('',*,*,#2567,.T.);+#2567=EDGE_CURVE('',#2521,#2554,#2568,.T.);+#2568=LINE('',#2522,#110);+#2569=ORIENTED_EDGE('',*,*,#2236,.F.);+#2570=ORIENTED_EDGE('',*,*,#2525,.F.);+#2571=PLANE('',#2572);+#2572=AXIS2_PLACEMENT_3D('',#2522,#13,#117);+#2573=ADVANCED_FACE('',(#2574),#2590,.T.);+#2574=FACE_BOUND('',#2575,.T.);+#2575=EDGE_LOOP('',(#2576,#2583,#2586,#2587));+#2576=ORIENTED_EDGE('',*,*,#2577,.T.);+#2577=EDGE_CURVE('',#2578,#2580,#2582,.T.);+#2578=VERTEX_POINT('',#2579);+#2579=CARTESIAN_POINT('',(-3.1,-1.225,1.79));+#2580=VERTEX_POINT('',#2581);+#2581=CARTESIAN_POINT('',(-3.1,-1.225,2.14));+#2582=LINE('',#2579,#618);+#2583=ORIENTED_EDGE('',*,*,#2584,.T.);+#2584=EDGE_CURVE('',#2580,#2252,#2585,.T.);+#2585=LINE('',#2581,#116);+#2586=ORIENTED_EDGE('',*,*,#2251,.T.);+#2587=ORIENTED_EDGE('',*,*,#2588,.T.);+#2588=EDGE_CURVE('',#2254,#2578,#2589,.T.);+#2589=LINE('',#2255,#2461);+#2590=PLANE('',#2591);+#2591=AXIS2_PLACEMENT_3D('',#2592,#879,#369);+#2592=CARTESIAN_POINT('',(-3.1,-0.323759014354,1.931294517928));+#2593=ADVANCED_FACE('',(#2594),#2606,.T.);+#2594=FACE_BOUND('',#2595,.T.);+#2595=EDGE_LOOP('',(#2596,#2597,#2602,#2605));+#2596=ORIENTED_EDGE('',*,*,#2268,.T.);+#2597=ORIENTED_EDGE('',*,*,#2598,.T.);+#2598=EDGE_CURVE('',#2264,#2599,#2601,.T.);+#2599=VERTEX_POINT('',#2600);+#2600=CARTESIAN_POINT('',(-2.9,-1.225,1.79));+#2601=LINE('',#2265,#2461);+#2602=ORIENTED_EDGE('',*,*,#2603,.F.);+#2603=EDGE_CURVE('',#2578,#2599,#2604,.T.);+#2604=LINE('',#2579,#110);+#2605=ORIENTED_EDGE('',*,*,#2588,.F.);+#2606=PLANE('',#2607);+#2607=AXIS2_PLACEMENT_3D('',#2255,#2473,#2462);+#2608=ADVANCED_FACE('',(#2609),#2619,.F.);+#2609=FACE_BOUND('',#2610,.F.);+#2610=EDGE_LOOP('',(#2611,#2616,#2262,#2597));+#2611=ORIENTED_EDGE('',*,*,#2612,.T.);+#2612=EDGE_CURVE('',#2599,#2613,#2615,.T.);+#2613=VERTEX_POINT('',#2614);+#2614=CARTESIAN_POINT('',(-2.9,-1.225,2.14));+#2615=LINE('',#2600,#618);+#2616=ORIENTED_EDGE('',*,*,#2617,.T.);+#2617=EDGE_CURVE('',#2613,#2259,#2618,.T.);+#2618=LINE('',#2614,#116);+#2619=PLANE('',#2620);+#2620=AXIS2_PLACEMENT_3D('',#2621,#879,#369);+#2621=CARTESIAN_POINT('',(-2.9,-0.323759014354,1.931294517928));+#2622=ADVANCED_FACE('',(#2623),#2630,.T.);+#2623=FACE_BOUND('',#2624,.T.);+#2624=EDGE_LOOP('',(#2625,#2616,#2628,#2629));+#2625=ORIENTED_EDGE('',*,*,#2626,.T.);+#2626=EDGE_CURVE('',#2580,#2613,#2627,.T.);+#2627=LINE('',#2581,#110);+#2628=ORIENTED_EDGE('',*,*,#2258,.F.);+#2629=ORIENTED_EDGE('',*,*,#2584,.F.);+#2630=PLANE('',#2631);+#2631=AXIS2_PLACEMENT_3D('',#2581,#13,#117);+#2632=ADVANCED_FACE('',(#2633),#2649,.T.);+#2633=FACE_BOUND('',#2634,.T.);+#2634=EDGE_LOOP('',(#2635,#2642,#2645,#2646));+#2635=ORIENTED_EDGE('',*,*,#2636,.T.);+#2636=EDGE_CURVE('',#2637,#2639,#2641,.T.);+#2637=VERTEX_POINT('',#2638);+#2638=CARTESIAN_POINT('',(-2.1,-1.225,1.79));+#2639=VERTEX_POINT('',#2640);+#2640=CARTESIAN_POINT('',(-2.1,-1.225,2.14));+#2641=LINE('',#2638,#618);+#2642=ORIENTED_EDGE('',*,*,#2643,.T.);+#2643=EDGE_CURVE('',#2639,#2274,#2644,.T.);+#2644=LINE('',#2640,#116);+#2645=ORIENTED_EDGE('',*,*,#2273,.T.);+#2646=ORIENTED_EDGE('',*,*,#2647,.T.);+#2647=EDGE_CURVE('',#2276,#2637,#2648,.T.);+#2648=LINE('',#2277,#2461);+#2649=PLANE('',#2650);+#2650=AXIS2_PLACEMENT_3D('',#2651,#879,#369);+#2651=CARTESIAN_POINT('',(-2.1,-0.323759014354,1.931294517928));+#2652=ADVANCED_FACE('',(#2653),#2665,.T.);+#2653=FACE_BOUND('',#2654,.T.);+#2654=EDGE_LOOP('',(#2655,#2656,#2661,#2664));+#2655=ORIENTED_EDGE('',*,*,#2290,.T.);+#2656=ORIENTED_EDGE('',*,*,#2657,.T.);+#2657=EDGE_CURVE('',#2286,#2658,#2660,.T.);+#2658=VERTEX_POINT('',#2659);+#2659=CARTESIAN_POINT('',(-1.9,-1.225,1.79));+#2660=LINE('',#2287,#2461);+#2661=ORIENTED_EDGE('',*,*,#2662,.F.);+#2662=EDGE_CURVE('',#2637,#2658,#2663,.T.);+#2663=LINE('',#2638,#110);+#2664=ORIENTED_EDGE('',*,*,#2647,.F.);+#2665=PLANE('',#2666);+#2666=AXIS2_PLACEMENT_3D('',#2277,#2473,#2462);+#2667=ADVANCED_FACE('',(#2668),#2678,.F.);+#2668=FACE_BOUND('',#2669,.F.);+#2669=EDGE_LOOP('',(#2670,#2675,#2284,#2656));+#2670=ORIENTED_EDGE('',*,*,#2671,.T.);+#2671=EDGE_CURVE('',#2658,#2672,#2674,.T.);+#2672=VERTEX_POINT('',#2673);+#2673=CARTESIAN_POINT('',(-1.9,-1.225,2.14));+#2674=LINE('',#2659,#618);+#2675=ORIENTED_EDGE('',*,*,#2676,.T.);+#2676=EDGE_CURVE('',#2672,#2281,#2677,.T.);+#2677=LINE('',#2673,#116);+#2678=PLANE('',#2679);+#2679=AXIS2_PLACEMENT_3D('',#2680,#879,#369);+#2680=CARTESIAN_POINT('',(-1.9,-0.323759014354,1.931294517928));+#2681=ADVANCED_FACE('',(#2682),#2689,.T.);+#2682=FACE_BOUND('',#2683,.T.);+#2683=EDGE_LOOP('',(#2684,#2675,#2687,#2688));+#2684=ORIENTED_EDGE('',*,*,#2685,.T.);+#2685=EDGE_CURVE('',#2639,#2672,#2686,.T.);+#2686=LINE('',#2640,#110);+#2687=ORIENTED_EDGE('',*,*,#2280,.F.);+#2688=ORIENTED_EDGE('',*,*,#2643,.F.);+#2689=PLANE('',#2690);+#2690=AXIS2_PLACEMENT_3D('',#2640,#13,#117);+#2691=ADVANCED_FACE('',(#2692),#2708,.T.);+#2692=FACE_BOUND('',#2693,.T.);+#2693=EDGE_LOOP('',(#2694,#2701,#2704,#2705));+#2694=ORIENTED_EDGE('',*,*,#2695,.T.);+#2695=EDGE_CURVE('',#2696,#2698,#2700,.T.);+#2696=VERTEX_POINT('',#2697);+#2697=CARTESIAN_POINT('',(-1.1,-1.225,1.79));+#2698=VERTEX_POINT('',#2699);+#2699=CARTESIAN_POINT('',(-1.1,-1.225,2.14));+#2700=LINE('',#2697,#618);+#2701=ORIENTED_EDGE('',*,*,#2702,.T.);+#2702=EDGE_CURVE('',#2698,#2296,#2703,.T.);+#2703=LINE('',#2699,#116);+#2704=ORIENTED_EDGE('',*,*,#2295,.T.);+#2705=ORIENTED_EDGE('',*,*,#2706,.T.);+#2706=EDGE_CURVE('',#2298,#2696,#2707,.T.);+#2707=LINE('',#2299,#2461);+#2708=PLANE('',#2709);+#2709=AXIS2_PLACEMENT_3D('',#2710,#879,#369);+#2710=CARTESIAN_POINT('',(-1.1,-0.323759014354,1.931294517928));+#2711=ADVANCED_FACE('',(#2712),#2724,.T.);+#2712=FACE_BOUND('',#2713,.T.);+#2713=EDGE_LOOP('',(#2714,#2715,#2720,#2723));+#2714=ORIENTED_EDGE('',*,*,#2312,.T.);+#2715=ORIENTED_EDGE('',*,*,#2716,.T.);+#2716=EDGE_CURVE('',#2308,#2717,#2719,.T.);+#2717=VERTEX_POINT('',#2718);+#2718=CARTESIAN_POINT('',(-0.9,-1.225,1.79));+#2719=LINE('',#2309,#2461);+#2720=ORIENTED_EDGE('',*,*,#2721,.F.);+#2721=EDGE_CURVE('',#2696,#2717,#2722,.T.);+#2722=LINE('',#2697,#110);+#2723=ORIENTED_EDGE('',*,*,#2706,.F.);+#2724=PLANE('',#2725);+#2725=AXIS2_PLACEMENT_3D('',#2299,#2473,#2462);+#2726=ADVANCED_FACE('',(#2727),#2737,.F.);+#2727=FACE_BOUND('',#2728,.F.);+#2728=EDGE_LOOP('',(#2729,#2734,#2306,#2715));+#2729=ORIENTED_EDGE('',*,*,#2730,.T.);+#2730=EDGE_CURVE('',#2717,#2731,#2733,.T.);+#2731=VERTEX_POINT('',#2732);+#2732=CARTESIAN_POINT('',(-0.9,-1.225,2.14));+#2733=LINE('',#2718,#618);+#2734=ORIENTED_EDGE('',*,*,#2735,.T.);+#2735=EDGE_CURVE('',#2731,#2303,#2736,.T.);+#2736=LINE('',#2732,#116);+#2737=PLANE('',#2738);+#2738=AXIS2_PLACEMENT_3D('',#2739,#879,#369);+#2739=CARTESIAN_POINT('',(-0.9,-0.323759014354,1.931294517928));+#2740=ADVANCED_FACE('',(#2741),#2748,.T.);+#2741=FACE_BOUND('',#2742,.T.);+#2742=EDGE_LOOP('',(#2743,#2734,#2746,#2747));+#2743=ORIENTED_EDGE('',*,*,#2744,.T.);+#2744=EDGE_CURVE('',#2698,#2731,#2745,.T.);+#2745=LINE('',#2699,#110);+#2746=ORIENTED_EDGE('',*,*,#2302,.F.);+#2747=ORIENTED_EDGE('',*,*,#2702,.F.);+#2748=PLANE('',#2749);+#2749=AXIS2_PLACEMENT_3D('',#2699,#13,#117);+#2750=ADVANCED_FACE('',(#2751),#2767,.T.);+#2751=FACE_BOUND('',#2752,.T.);+#2752=EDGE_LOOP('',(#2753,#2760,#2763,#2764));+#2753=ORIENTED_EDGE('',*,*,#2754,.T.);+#2754=EDGE_CURVE('',#2755,#2757,#2759,.T.);+#2755=VERTEX_POINT('',#2756);+#2756=CARTESIAN_POINT('',(-1.E-01,-1.225,1.79));+#2757=VERTEX_POINT('',#2758);+#2758=CARTESIAN_POINT('',(-1.E-01,-1.225,2.14));+#2759=LINE('',#2756,#618);+#2760=ORIENTED_EDGE('',*,*,#2761,.T.);+#2761=EDGE_CURVE('',#2757,#2318,#2762,.T.);+#2762=LINE('',#2758,#116);+#2763=ORIENTED_EDGE('',*,*,#2317,.T.);+#2764=ORIENTED_EDGE('',*,*,#2765,.T.);+#2765=EDGE_CURVE('',#2320,#2755,#2766,.T.);+#2766=LINE('',#2321,#2461);+#2767=PLANE('',#2768);+#2768=AXIS2_PLACEMENT_3D('',#2769,#879,#369);+#2769=CARTESIAN_POINT('',(-1.E-01,-0.323759014354,1.931294517928));+#2770=ADVANCED_FACE('',(#2771),#2783,.T.);+#2771=FACE_BOUND('',#2772,.T.);+#2772=EDGE_LOOP('',(#2773,#2774,#2779,#2782));+#2773=ORIENTED_EDGE('',*,*,#2334,.T.);+#2774=ORIENTED_EDGE('',*,*,#2775,.T.);+#2775=EDGE_CURVE('',#2330,#2776,#2778,.T.);+#2776=VERTEX_POINT('',#2777);+#2777=CARTESIAN_POINT('',(0.1,-1.225,1.79));+#2778=LINE('',#2331,#2461);+#2779=ORIENTED_EDGE('',*,*,#2780,.F.);+#2780=EDGE_CURVE('',#2755,#2776,#2781,.T.);+#2781=LINE('',#2756,#110);+#2782=ORIENTED_EDGE('',*,*,#2765,.F.);+#2783=PLANE('',#2784);+#2784=AXIS2_PLACEMENT_3D('',#2321,#2473,#2462);+#2785=ADVANCED_FACE('',(#2786),#2796,.F.);+#2786=FACE_BOUND('',#2787,.F.);+#2787=EDGE_LOOP('',(#2788,#2793,#2328,#2774));+#2788=ORIENTED_EDGE('',*,*,#2789,.T.);+#2789=EDGE_CURVE('',#2776,#2790,#2792,.T.);+#2790=VERTEX_POINT('',#2791);+#2791=CARTESIAN_POINT('',(0.1,-1.225,2.14));+#2792=LINE('',#2777,#618);+#2793=ORIENTED_EDGE('',*,*,#2794,.T.);+#2794=EDGE_CURVE('',#2790,#2325,#2795,.T.);+#2795=LINE('',#2791,#116);+#2796=PLANE('',#2797);+#2797=AXIS2_PLACEMENT_3D('',#2798,#879,#369);+#2798=CARTESIAN_POINT('',(0.1,-0.323759014354,1.931294517928));+#2799=ADVANCED_FACE('',(#2800),#2807,.T.);+#2800=FACE_BOUND('',#2801,.T.);+#2801=EDGE_LOOP('',(#2802,#2793,#2805,#2806));+#2802=ORIENTED_EDGE('',*,*,#2803,.T.);+#2803=EDGE_CURVE('',#2757,#2790,#2804,.T.);+#2804=LINE('',#2758,#110);+#2805=ORIENTED_EDGE('',*,*,#2324,.F.);+#2806=ORIENTED_EDGE('',*,*,#2761,.F.);+#2807=PLANE('',#2808);+#2808=AXIS2_PLACEMENT_3D('',#2758,#13,#117);+#2809=ADVANCED_FACE('',(#2810),#2826,.T.);+#2810=FACE_BOUND('',#2811,.T.);+#2811=EDGE_LOOP('',(#2812,#2819,#2822,#2823));+#2812=ORIENTED_EDGE('',*,*,#2813,.T.);+#2813=EDGE_CURVE('',#2814,#2816,#2818,.T.);+#2814=VERTEX_POINT('',#2815);+#2815=CARTESIAN_POINT('',(0.9,-1.225,1.79));+#2816=VERTEX_POINT('',#2817);+#2817=CARTESIAN_POINT('',(0.9,-1.225,2.14));+#2818=LINE('',#2815,#618);+#2819=ORIENTED_EDGE('',*,*,#2820,.T.);+#2820=EDGE_CURVE('',#2816,#2340,#2821,.T.);+#2821=LINE('',#2817,#116);+#2822=ORIENTED_EDGE('',*,*,#2339,.T.);+#2823=ORIENTED_EDGE('',*,*,#2824,.T.);+#2824=EDGE_CURVE('',#2342,#2814,#2825,.T.);+#2825=LINE('',#2343,#2461);+#2826=PLANE('',#2827);+#2827=AXIS2_PLACEMENT_3D('',#2828,#879,#369);+#2828=CARTESIAN_POINT('',(0.9,-0.323759014354,1.931294517928));+#2829=ADVANCED_FACE('',(#2830),#2842,.T.);+#2830=FACE_BOUND('',#2831,.T.);+#2831=EDGE_LOOP('',(#2832,#2833,#2838,#2841));+#2832=ORIENTED_EDGE('',*,*,#2356,.T.);+#2833=ORIENTED_EDGE('',*,*,#2834,.T.);+#2834=EDGE_CURVE('',#2352,#2835,#2837,.T.);+#2835=VERTEX_POINT('',#2836);+#2836=CARTESIAN_POINT('',(1.1,-1.225,1.79));+#2837=LINE('',#2353,#2461);+#2838=ORIENTED_EDGE('',*,*,#2839,.F.);+#2839=EDGE_CURVE('',#2814,#2835,#2840,.T.);+#2840=LINE('',#2815,#110);+#2841=ORIENTED_EDGE('',*,*,#2824,.F.);+#2842=PLANE('',#2843);+#2843=AXIS2_PLACEMENT_3D('',#2343,#2473,#2462);+#2844=ADVANCED_FACE('',(#2845),#2855,.F.);+#2845=FACE_BOUND('',#2846,.F.);+#2846=EDGE_LOOP('',(#2847,#2852,#2350,#2833));+#2847=ORIENTED_EDGE('',*,*,#2848,.T.);+#2848=EDGE_CURVE('',#2835,#2849,#2851,.T.);+#2849=VERTEX_POINT('',#2850);+#2850=CARTESIAN_POINT('',(1.1,-1.225,2.14));+#2851=LINE('',#2836,#618);+#2852=ORIENTED_EDGE('',*,*,#2853,.T.);+#2853=EDGE_CURVE('',#2849,#2347,#2854,.T.);+#2854=LINE('',#2850,#116);+#2855=PLANE('',#2856);+#2856=AXIS2_PLACEMENT_3D('',#2857,#879,#369);+#2857=CARTESIAN_POINT('',(1.1,-0.323759014354,1.931294517928));+#2858=ADVANCED_FACE('',(#2859),#2866,.T.);+#2859=FACE_BOUND('',#2860,.T.);+#2860=EDGE_LOOP('',(#2861,#2852,#2864,#2865));+#2861=ORIENTED_EDGE('',*,*,#2862,.T.);+#2862=EDGE_CURVE('',#2816,#2849,#2863,.T.);+#2863=LINE('',#2817,#110);+#2864=ORIENTED_EDGE('',*,*,#2346,.F.);+#2865=ORIENTED_EDGE('',*,*,#2820,.F.);+#2866=PLANE('',#2867);+#2867=AXIS2_PLACEMENT_3D('',#2817,#13,#117);+#2868=ADVANCED_FACE('',(#2869),#2885,.T.);+#2869=FACE_BOUND('',#2870,.T.);+#2870=EDGE_LOOP('',(#2871,#2878,#2881,#2882));+#2871=ORIENTED_EDGE('',*,*,#2872,.T.);+#2872=EDGE_CURVE('',#2873,#2875,#2877,.T.);+#2873=VERTEX_POINT('',#2874);+#2874=CARTESIAN_POINT('',(1.9,-1.225,1.79));+#2875=VERTEX_POINT('',#2876);+#2876=CARTESIAN_POINT('',(1.9,-1.225,2.14));+#2877=LINE('',#2874,#618);+#2878=ORIENTED_EDGE('',*,*,#2879,.T.);+#2879=EDGE_CURVE('',#2875,#2362,#2880,.T.);+#2880=LINE('',#2876,#116);+#2881=ORIENTED_EDGE('',*,*,#2361,.T.);+#2882=ORIENTED_EDGE('',*,*,#2883,.T.);+#2883=EDGE_CURVE('',#2364,#2873,#2884,.T.);+#2884=LINE('',#2365,#2461);+#2885=PLANE('',#2886);+#2886=AXIS2_PLACEMENT_3D('',#2887,#879,#369);+#2887=CARTESIAN_POINT('',(1.9,-0.323759014354,1.931294517928));+#2888=ADVANCED_FACE('',(#2889),#2901,.T.);+#2889=FACE_BOUND('',#2890,.T.);+#2890=EDGE_LOOP('',(#2891,#2892,#2897,#2900));+#2891=ORIENTED_EDGE('',*,*,#2378,.T.);+#2892=ORIENTED_EDGE('',*,*,#2893,.T.);+#2893=EDGE_CURVE('',#2374,#2894,#2896,.T.);+#2894=VERTEX_POINT('',#2895);+#2895=CARTESIAN_POINT('',(2.1,-1.225,1.79));+#2896=LINE('',#2375,#2461);+#2897=ORIENTED_EDGE('',*,*,#2898,.F.);+#2898=EDGE_CURVE('',#2873,#2894,#2899,.T.);+#2899=LINE('',#2874,#110);+#2900=ORIENTED_EDGE('',*,*,#2883,.F.);+#2901=PLANE('',#2902);+#2902=AXIS2_PLACEMENT_3D('',#2365,#2473,#2462);+#2903=ADVANCED_FACE('',(#2904),#2914,.F.);+#2904=FACE_BOUND('',#2905,.F.);+#2905=EDGE_LOOP('',(#2906,#2911,#2372,#2892));+#2906=ORIENTED_EDGE('',*,*,#2907,.T.);+#2907=EDGE_CURVE('',#2894,#2908,#2910,.T.);+#2908=VERTEX_POINT('',#2909);+#2909=CARTESIAN_POINT('',(2.1,-1.225,2.14));+#2910=LINE('',#2895,#618);+#2911=ORIENTED_EDGE('',*,*,#2912,.T.);+#2912=EDGE_CURVE('',#2908,#2369,#2913,.T.);+#2913=LINE('',#2909,#116);+#2914=PLANE('',#2915);+#2915=AXIS2_PLACEMENT_3D('',#2916,#879,#369);+#2916=CARTESIAN_POINT('',(2.1,-0.323759014354,1.931294517928));+#2917=ADVANCED_FACE('',(#2918),#2925,.T.);+#2918=FACE_BOUND('',#2919,.T.);+#2919=EDGE_LOOP('',(#2920,#2911,#2923,#2924));+#2920=ORIENTED_EDGE('',*,*,#2921,.T.);+#2921=EDGE_CURVE('',#2875,#2908,#2922,.T.);+#2922=LINE('',#2876,#110);+#2923=ORIENTED_EDGE('',*,*,#2368,.F.);+#2924=ORIENTED_EDGE('',*,*,#2879,.F.);+#2925=PLANE('',#2926);+#2926=AXIS2_PLACEMENT_3D('',#2876,#13,#117);+#2927=ADVANCED_FACE('',(#2928),#2944,.T.);+#2928=FACE_BOUND('',#2929,.T.);+#2929=EDGE_LOOP('',(#2930,#2937,#2940,#2941));+#2930=ORIENTED_EDGE('',*,*,#2931,.T.);+#2931=EDGE_CURVE('',#2932,#2934,#2936,.T.);+#2932=VERTEX_POINT('',#2933);+#2933=CARTESIAN_POINT('',(2.9,-1.225,1.79));+#2934=VERTEX_POINT('',#2935);+#2935=CARTESIAN_POINT('',(2.9,-1.225,2.14));+#2936=LINE('',#2933,#618);+#2937=ORIENTED_EDGE('',*,*,#2938,.T.);+#2938=EDGE_CURVE('',#2934,#2384,#2939,.T.);+#2939=LINE('',#2935,#116);+#2940=ORIENTED_EDGE('',*,*,#2383,.T.);+#2941=ORIENTED_EDGE('',*,*,#2942,.T.);+#2942=EDGE_CURVE('',#2386,#2932,#2943,.T.);+#2943=LINE('',#2387,#2461);+#2944=PLANE('',#2945);+#2945=AXIS2_PLACEMENT_3D('',#2946,#879,#369);+#2946=CARTESIAN_POINT('',(2.9,-0.323759014354,1.931294517928));+#2947=ADVANCED_FACE('',(#2948),#2960,.T.);+#2948=FACE_BOUND('',#2949,.T.);+#2949=EDGE_LOOP('',(#2950,#2951,#2956,#2959));+#2950=ORIENTED_EDGE('',*,*,#2400,.T.);+#2951=ORIENTED_EDGE('',*,*,#2952,.T.);+#2952=EDGE_CURVE('',#2396,#2953,#2955,.T.);+#2953=VERTEX_POINT('',#2954);+#2954=CARTESIAN_POINT('',(3.1,-1.225,1.79));+#2955=LINE('',#2397,#2461);+#2956=ORIENTED_EDGE('',*,*,#2957,.F.);+#2957=EDGE_CURVE('',#2932,#2953,#2958,.T.);+#2958=LINE('',#2933,#110);+#2959=ORIENTED_EDGE('',*,*,#2942,.F.);+#2960=PLANE('',#2961);+#2961=AXIS2_PLACEMENT_3D('',#2387,#2473,#2462);+#2962=ADVANCED_FACE('',(#2963),#2973,.F.);+#2963=FACE_BOUND('',#2964,.F.);+#2964=EDGE_LOOP('',(#2965,#2970,#2394,#2951));+#2965=ORIENTED_EDGE('',*,*,#2966,.T.);+#2966=EDGE_CURVE('',#2953,#2967,#2969,.T.);+#2967=VERTEX_POINT('',#2968);+#2968=CARTESIAN_POINT('',(3.1,-1.225,2.14));+#2969=LINE('',#2954,#618);+#2970=ORIENTED_EDGE('',*,*,#2971,.T.);+#2971=EDGE_CURVE('',#2967,#2391,#2972,.T.);+#2972=LINE('',#2968,#116);+#2973=PLANE('',#2974);+#2974=AXIS2_PLACEMENT_3D('',#2975,#879,#369);+#2975=CARTESIAN_POINT('',(3.1,-0.323759014354,1.931294517928));+#2976=ADVANCED_FACE('',(#2977),#2984,.T.);+#2977=FACE_BOUND('',#2978,.T.);+#2978=EDGE_LOOP('',(#2979,#2970,#2982,#2983));+#2979=ORIENTED_EDGE('',*,*,#2980,.T.);+#2980=EDGE_CURVE('',#2934,#2967,#2981,.T.);+#2981=LINE('',#2935,#110);+#2982=ORIENTED_EDGE('',*,*,#2390,.F.);+#2983=ORIENTED_EDGE('',*,*,#2938,.F.);+#2984=PLANE('',#2985);+#2985=AXIS2_PLACEMENT_3D('',#2935,#13,#117);+#2986=ADVANCED_FACE('',(#2987),#3003,.T.);+#2987=FACE_BOUND('',#2988,.T.);+#2988=EDGE_LOOP('',(#2989,#2996,#2999,#3000));+#2989=ORIENTED_EDGE('',*,*,#2990,.T.);+#2990=EDGE_CURVE('',#2991,#2993,#2995,.T.);+#2991=VERTEX_POINT('',#2992);+#2992=CARTESIAN_POINT('',(3.9,-1.225,1.79));+#2993=VERTEX_POINT('',#2994);+#2994=CARTESIAN_POINT('',(3.9,-1.225,2.14));+#2995=LINE('',#2992,#618);+#2996=ORIENTED_EDGE('',*,*,#2997,.T.);+#2997=EDGE_CURVE('',#2993,#2406,#2998,.T.);+#2998=LINE('',#2994,#116);+#2999=ORIENTED_EDGE('',*,*,#2405,.T.);+#3000=ORIENTED_EDGE('',*,*,#3001,.T.);+#3001=EDGE_CURVE('',#2408,#2991,#3002,.T.);+#3002=LINE('',#2409,#2461);+#3003=PLANE('',#3004);+#3004=AXIS2_PLACEMENT_3D('',#3005,#879,#369);+#3005=CARTESIAN_POINT('',(3.9,-0.323759014354,1.931294517928));+#3006=ADVANCED_FACE('',(#3007),#3019,.T.);+#3007=FACE_BOUND('',#3008,.T.);+#3008=EDGE_LOOP('',(#3009,#3010,#3015,#3018));+#3009=ORIENTED_EDGE('',*,*,#2422,.T.);+#3010=ORIENTED_EDGE('',*,*,#3011,.T.);+#3011=EDGE_CURVE('',#2418,#3012,#3014,.T.);+#3012=VERTEX_POINT('',#3013);+#3013=CARTESIAN_POINT('',(4.1,-1.225,1.79));+#3014=LINE('',#2419,#2461);+#3015=ORIENTED_EDGE('',*,*,#3016,.F.);+#3016=EDGE_CURVE('',#2991,#3012,#3017,.T.);+#3017=LINE('',#2992,#110);+#3018=ORIENTED_EDGE('',*,*,#3001,.F.);+#3019=PLANE('',#3020);+#3020=AXIS2_PLACEMENT_3D('',#2409,#2473,#2462);+#3021=ADVANCED_FACE('',(#3022),#3032,.F.);+#3022=FACE_BOUND('',#3023,.F.);+#3023=EDGE_LOOP('',(#3024,#3029,#2416,#3010));+#3024=ORIENTED_EDGE('',*,*,#3025,.T.);+#3025=EDGE_CURVE('',#3012,#3026,#3028,.T.);+#3026=VERTEX_POINT('',#3027);+#3027=CARTESIAN_POINT('',(4.1,-1.225,2.14));+#3028=LINE('',#3013,#618);+#3029=ORIENTED_EDGE('',*,*,#3030,.T.);+#3030=EDGE_CURVE('',#3026,#2413,#3031,.T.);+#3031=LINE('',#3027,#116);+#3032=PLANE('',#3033);+#3033=AXIS2_PLACEMENT_3D('',#3034,#879,#369);+#3034=CARTESIAN_POINT('',(4.1,-0.323759014354,1.931294517928));+#3035=ADVANCED_FACE('',(#3036),#3043,.T.);+#3036=FACE_BOUND('',#3037,.T.);+#3037=EDGE_LOOP('',(#3038,#3029,#3041,#3042));+#3038=ORIENTED_EDGE('',*,*,#3039,.T.);+#3039=EDGE_CURVE('',#2993,#3026,#3040,.T.);+#3040=LINE('',#2994,#110);+#3041=ORIENTED_EDGE('',*,*,#2412,.F.);+#3042=ORIENTED_EDGE('',*,*,#2997,.F.);+#3043=PLANE('',#3044);+#3044=AXIS2_PLACEMENT_3D('',#2994,#13,#117);+#3045=ADVANCED_FACE('',(#3046),#3062,.T.);+#3046=FACE_BOUND('',#3047,.T.);+#3047=EDGE_LOOP('',(#3048,#3055,#3058,#3059));+#3048=ORIENTED_EDGE('',*,*,#3049,.T.);+#3049=EDGE_CURVE('',#3050,#3052,#3054,.T.);+#3050=VERTEX_POINT('',#3051);+#3051=CARTESIAN_POINT('',(4.9,-1.225,1.79));+#3052=VERTEX_POINT('',#3053);+#3053=CARTESIAN_POINT('',(4.9,-1.225,2.14));+#3054=LINE('',#3051,#618);+#3055=ORIENTED_EDGE('',*,*,#3056,.T.);+#3056=EDGE_CURVE('',#3052,#2428,#3057,.T.);+#3057=LINE('',#3053,#116);+#3058=ORIENTED_EDGE('',*,*,#2427,.T.);+#3059=ORIENTED_EDGE('',*,*,#3060,.T.);+#3060=EDGE_CURVE('',#2430,#3050,#3061,.T.);+#3061=LINE('',#2431,#2461);+#3062=PLANE('',#3063);+#3063=AXIS2_PLACEMENT_3D('',#3064,#879,#369);+#3064=CARTESIAN_POINT('',(4.9,-0.323759014354,1.931294517928));+#3065=ADVANCED_FACE('',(#3066),#3078,.T.);+#3066=FACE_BOUND('',#3067,.T.);+#3067=EDGE_LOOP('',(#3068,#3069,#3074,#3077));+#3068=ORIENTED_EDGE('',*,*,#2444,.T.);+#3069=ORIENTED_EDGE('',*,*,#3070,.T.);+#3070=EDGE_CURVE('',#2440,#3071,#3073,.T.);+#3071=VERTEX_POINT('',#3072);+#3072=CARTESIAN_POINT('',(5.1,-1.225,1.79));+#3073=LINE('',#2441,#2461);+#3074=ORIENTED_EDGE('',*,*,#3075,.F.);+#3075=EDGE_CURVE('',#3050,#3071,#3076,.T.);+#3076=LINE('',#3051,#110);+#3077=ORIENTED_EDGE('',*,*,#3060,.F.);+#3078=PLANE('',#3079);+#3079=AXIS2_PLACEMENT_3D('',#2431,#2473,#2462);+#3080=ADVANCED_FACE('',(#3081),#3091,.F.);+#3081=FACE_BOUND('',#3082,.F.);+#3082=EDGE_LOOP('',(#3083,#3088,#2438,#3069));+#3083=ORIENTED_EDGE('',*,*,#3084,.T.);+#3084=EDGE_CURVE('',#3071,#3085,#3087,.T.);+#3085=VERTEX_POINT('',#3086);+#3086=CARTESIAN_POINT('',(5.1,-1.225,2.14));+#3087=LINE('',#3072,#618);+#3088=ORIENTED_EDGE('',*,*,#3089,.T.);+#3089=EDGE_CURVE('',#3085,#2435,#3090,.T.);+#3090=LINE('',#3086,#116);+#3091=PLANE('',#3092);+#3092=AXIS2_PLACEMENT_3D('',#3093,#879,#369);+#3093=CARTESIAN_POINT('',(5.1,-0.323759014354,1.931294517928));+#3094=ADVANCED_FACE('',(#3095),#3102,.T.);+#3095=FACE_BOUND('',#3096,.T.);+#3096=EDGE_LOOP('',(#3097,#3088,#3100,#3101));+#3097=ORIENTED_EDGE('',*,*,#3098,.T.);+#3098=EDGE_CURVE('',#3052,#3085,#3099,.T.);+#3099=LINE('',#3053,#110);+#3100=ORIENTED_EDGE('',*,*,#2434,.F.);+#3101=ORIENTED_EDGE('',*,*,#3056,.F.);+#3102=PLANE('',#3103);+#3103=AXIS2_PLACEMENT_3D('',#3053,#13,#117);+#3104=ADVANCED_FACE('',(#3105),#3110,.T.);+#3105=FACE_BOUND('',#3106,.T.);+#3106=EDGE_LOOP('',(#3107,#2477,#3108,#3109));+#3107=ORIENTED_EDGE('',*,*,#2464,.T.);+#3108=ORIENTED_EDGE('',*,*,#2492,.F.);+#3109=ORIENTED_EDGE('',*,*,#2506,.F.);+#3110=PLANE('',#3111);+#3111=AXIS2_PLACEMENT_3D('',#2466,#935,#13);+#3112=ADVANCED_FACE('',(#3113),#3118,.T.);+#3113=FACE_BOUND('',#3114,.T.);+#3114=EDGE_LOOP('',(#3115,#2552,#3116,#3117));+#3115=ORIENTED_EDGE('',*,*,#2544,.T.);+#3116=ORIENTED_EDGE('',*,*,#2567,.F.);+#3117=ORIENTED_EDGE('',*,*,#2518,.F.);+#3118=PLANE('',#3119);+#3119=AXIS2_PLACEMENT_3D('',#2520,#935,#13);+#3120=ADVANCED_FACE('',(#3121),#3126,.T.);+#3121=FACE_BOUND('',#3122,.T.);+#3122=EDGE_LOOP('',(#3123,#2611,#3124,#3125));+#3123=ORIENTED_EDGE('',*,*,#2603,.T.);+#3124=ORIENTED_EDGE('',*,*,#2626,.F.);+#3125=ORIENTED_EDGE('',*,*,#2577,.F.);+#3126=PLANE('',#3127);+#3127=AXIS2_PLACEMENT_3D('',#2579,#935,#13);+#3128=ADVANCED_FACE('',(#3129),#3134,.T.);+#3129=FACE_BOUND('',#3130,.T.);+#3130=EDGE_LOOP('',(#3131,#2670,#3132,#3133));+#3131=ORIENTED_EDGE('',*,*,#2662,.T.);+#3132=ORIENTED_EDGE('',*,*,#2685,.F.);+#3133=ORIENTED_EDGE('',*,*,#2636,.F.);+#3134=PLANE('',#3135);+#3135=AXIS2_PLACEMENT_3D('',#2638,#935,#13);+#3136=ADVANCED_FACE('',(#3137),#3142,.T.);+#3137=FACE_BOUND('',#3138,.T.);+#3138=EDGE_LOOP('',(#3139,#2729,#3140,#3141));+#3139=ORIENTED_EDGE('',*,*,#2721,.T.);+#3140=ORIENTED_EDGE('',*,*,#2744,.F.);+#3141=ORIENTED_EDGE('',*,*,#2695,.F.);+#3142=PLANE('',#3143);+#3143=AXIS2_PLACEMENT_3D('',#2697,#935,#13);+#3144=ADVANCED_FACE('',(#3145),#3150,.T.);+#3145=FACE_BOUND('',#3146,.T.);+#3146=EDGE_LOOP('',(#3147,#2788,#3148,#3149));+#3147=ORIENTED_EDGE('',*,*,#2780,.T.);+#3148=ORIENTED_EDGE('',*,*,#2803,.F.);+#3149=ORIENTED_EDGE('',*,*,#2754,.F.);+#3150=PLANE('',#3151);+#3151=AXIS2_PLACEMENT_3D('',#2756,#935,#13);+#3152=ADVANCED_FACE('',(#3153),#3158,.T.);+#3153=FACE_BOUND('',#3154,.T.);+#3154=EDGE_LOOP('',(#3155,#2847,#3156,#3157));+#3155=ORIENTED_EDGE('',*,*,#2839,.T.);+#3156=ORIENTED_EDGE('',*,*,#2862,.F.);+#3157=ORIENTED_EDGE('',*,*,#2813,.F.);+#3158=PLANE('',#3159);+#3159=AXIS2_PLACEMENT_3D('',#2815,#935,#13);+#3160=ADVANCED_FACE('',(#3161),#3166,.T.);+#3161=FACE_BOUND('',#3162,.T.);+#3162=EDGE_LOOP('',(#3163,#2906,#3164,#3165));+#3163=ORIENTED_EDGE('',*,*,#2898,.T.);+#3164=ORIENTED_EDGE('',*,*,#2921,.F.);+#3165=ORIENTED_EDGE('',*,*,#2872,.F.);+#3166=PLANE('',#3167);+#3167=AXIS2_PLACEMENT_3D('',#2874,#935,#13);+#3168=ADVANCED_FACE('',(#3169),#3174,.T.);+#3169=FACE_BOUND('',#3170,.T.);+#3170=EDGE_LOOP('',(#3171,#2965,#3172,#3173));+#3171=ORIENTED_EDGE('',*,*,#2957,.T.);+#3172=ORIENTED_EDGE('',*,*,#2980,.F.);+#3173=ORIENTED_EDGE('',*,*,#2931,.F.);+#3174=PLANE('',#3175);+#3175=AXIS2_PLACEMENT_3D('',#2933,#935,#13);+#3176=ADVANCED_FACE('',(#3177),#3182,.T.);+#3177=FACE_BOUND('',#3178,.T.);+#3178=EDGE_LOOP('',(#3179,#3024,#3180,#3181));+#3179=ORIENTED_EDGE('',*,*,#3016,.T.);+#3180=ORIENTED_EDGE('',*,*,#3039,.F.);+#3181=ORIENTED_EDGE('',*,*,#2990,.F.);+#3182=PLANE('',#3183);+#3183=AXIS2_PLACEMENT_3D('',#2992,#935,#13);+#3184=ADVANCED_FACE('',(#3185),#3190,.T.);+#3185=FACE_BOUND('',#3186,.T.);+#3186=EDGE_LOOP('',(#3187,#3083,#3188,#3189));+#3187=ORIENTED_EDGE('',*,*,#3075,.T.);+#3188=ORIENTED_EDGE('',*,*,#3098,.F.);+#3189=ORIENTED_EDGE('',*,*,#3049,.F.);+#3190=PLANE('',#3191);+#3191=AXIS2_PLACEMENT_3D('',#3051,#935,#13);+#3192=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3196)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#3193,#3194,#3195)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3193=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3194=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3195=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3196=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3193,'distance_accuracy_value','confusion accuracy');+#3197=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#3198=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#3199,#3209,#3210,#3211,#3212,#3213,#3214,#3215,#3216,#3217,#3218,#3219,#3220,#3221,#3222,#3223,#3232,#3233,#3234,#3235,#3236,#3237,#3238,#3239,#3240,#3241,#3242,#3243,#3244,#3245,#3246,#3247,#3248,#3249,#3250,#3251,#3252,#3253,#3254,#3255,#3256,#3257,#3258,#3259,#3260,#3261,#3262,#3263,#3264,#3265,#3266,#3267,#3268,#3269,#3270,#3271,#3272,#3273,#3274,#3275,#3276,#3277,#3278,#3279,#3280,#3281,#3282,#3283,#3284,#3285,#3286,#3287,#3288,#3289,#3290,#3291,#3292,#3293,#3294,#3295,#3296,#3297,#3298,#3299,#3300,#3301,#3302,#3303,#3304,#3305,#3306,#3307,#3308,#3309,#3310,#3311,#3312,#3313,#3314,#3315,#3316,#3317,#3318,#3319,#3320,#3321,#3322,#3323,#3324,#3325,#3326,#3327,#3328,#3329,#3330,#3331,#3332,#3333,#3334,#3335,#3336,#3337,#3338,#3339,#3340,#3341,#3342,#3343,#3344,#3345,#3346,#3347,#3348,#3349,#3350,#3351,#3352,#3353,#3354,#3355,#3356,#3357,#3358,#3359,#3360,#3361,#3362,#3363,#3364,#3365,#3366,#3367,#3368,#3369,#3370,#3371,#3372,#3373,#3374,#3375,#3376,#3377,#3378,#3379,#3380,#3381,#3382,#3383),#3192);+#3199=STYLED_ITEM('color',(#3200),#17);+#3200=PRESENTATION_STYLE_ASSIGNMENT((#3201,#3207));+#3201=SURFACE_STYLE_USAGE(.BOTH.,#3202);+#3202=SURFACE_SIDE_STYLE('',(#3203));+#3203=SURFACE_STYLE_FILL_AREA(#3204);+#3204=FILL_AREA_STYLE('',(#3205));+#3205=FILL_AREA_STYLE_COLOUR('',#3206);+#3206=COLOUR_RGB('',0.894999996726,0.890999991539,0.812999995914);+#3207=CURVE_STYLE('',#3208,POSITIVE_LENGTH_MEASURE(0.1),#3206);+#3208=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#3209=STYLED_ITEM('color',(#3200),#95);+#3210=STYLED_ITEM('color',(#3200),#356);+#3211=STYLED_ITEM('color',(#3200),#373);+#3212=STYLED_ITEM('color',(#3200),#388);+#3213=STYLED_ITEM('color',(#3200),#403);+#3214=STYLED_ITEM('color',(#3200),#418);+#3215=STYLED_ITEM('color',(#3200),#513);+#3216=STYLED_ITEM('color',(#3200),#548);+#3217=STYLED_ITEM('color',(#3200),#563);+#3218=STYLED_ITEM('color',(#3200),#578);+#3219=STYLED_ITEM('color',(#3200),#593);+#3220=STYLED_ITEM('color',(#3200),#608);+#3221=STYLED_ITEM('color',(#3200),#787);+#3222=STYLED_ITEM('color',(#3200),#830);+#3223=STYLED_ITEM('color',(#3224),#845);+#3224=PRESENTATION_STYLE_ASSIGNMENT((#3225,#3231));+#3225=SURFACE_STYLE_USAGE(.BOTH.,#3226);+#3226=SURFACE_SIDE_STYLE('',(#3227));+#3227=SURFACE_STYLE_FILL_AREA(#3228);+#3228=FILL_AREA_STYLE('',(#3229));+#3229=FILL_AREA_STYLE_COLOUR('',#3230);+#3230=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#3231=CURVE_STYLE('',#3208,POSITIVE_LENGTH_MEASURE(0.1),#3230);+#3232=STYLED_ITEM('color',(#3224),#862);+#3233=STYLED_ITEM('color',(#3224),#880);+#3234=STYLED_ITEM('color',(#3224),#901);+#3235=STYLED_ITEM('color',(#3224),#913);+#3236=STYLED_ITEM('color',(#3224),#939);+#3237=STYLED_ITEM('color',(#3224),#953);+#3238=STYLED_ITEM('color',(#3224),#974);+#3239=STYLED_ITEM('color',(#3224),#998);+#3240=STYLED_ITEM('color',(#3224),#1012);+#3241=STYLED_ITEM('color',(#3224),#1033);+#3242=STYLED_ITEM('color',(#3224),#1057);+#3243=STYLED_ITEM('color',(#3224),#1071);+#3244=STYLED_ITEM('color',(#3224),#1092);+#3245=STYLED_ITEM('color',(#3224),#1116);+#3246=STYLED_ITEM('color',(#3224),#1130);+#3247=STYLED_ITEM('color',(#3224),#1151);+#3248=STYLED_ITEM('color',(#3224),#1175);+#3249=STYLED_ITEM('color',(#3224),#1189);+#3250=STYLED_ITEM('color',(#3224),#1210);+#3251=STYLED_ITEM('color',(#3224),#1234);+#3252=STYLED_ITEM('color',(#3224),#1248);+#3253=STYLED_ITEM('color',(#3224),#1269);+#3254=STYLED_ITEM('color',(#3224),#1293);+#3255=STYLED_ITEM('color',(#3224),#1307);+#3256=STYLED_ITEM('color',(#3224),#1328);+#3257=STYLED_ITEM('color',(#3224),#1352);+#3258=STYLED_ITEM('color',(#3224),#1366);+#3259=STYLED_ITEM('color',(#3224),#1387);+#3260=STYLED_ITEM('color',(#3224),#1411);+#3261=STYLED_ITEM('color',(#3224),#1425);+#3262=STYLED_ITEM('color',(#3224),#1446);+#3263=STYLED_ITEM('color',(#3224),#1470);+#3264=STYLED_ITEM('color',(#3224),#1484);+#3265=STYLED_ITEM('color',(#3224),#1505);+#3266=STYLED_ITEM('color',(#3224),#1529);+#3267=STYLED_ITEM('color',(#3224),#1543);+#3268=STYLED_ITEM('color',(#3224),#1564);+#3269=STYLED_ITEM('color',(#3224),#1579);+#3270=STYLED_ITEM('color',(#3224),#1590);+#3271=STYLED_ITEM('color',(#3200),#1606);+#3272=STYLED_ITEM('color',(#3200),#1620);+#3273=STYLED_ITEM('color',(#3200),#1652);+#3274=STYLED_ITEM('color',(#3200),#1667);+#3275=STYLED_ITEM('color',(#3200),#1681);+#3276=STYLED_ITEM('color',(#3200),#1691);+#3277=STYLED_ITEM('color',(#3200),#1705);+#3278=STYLED_ITEM('color',(#3200),#1733);+#3279=STYLED_ITEM('color',(#3200),#1744);+#3280=STYLED_ITEM('color',(#3200),#1757);+#3281=STYLED_ITEM('color',(#3200),#1764);+#3282=STYLED_ITEM('color',(#3200),#1774);+#3283=STYLED_ITEM('color',(#3200),#1799);+#3284=STYLED_ITEM('color',(#3200),#1808);+#3285=STYLED_ITEM('color',(#3200),#1815);+#3286=STYLED_ITEM('color',(#3224),#1825);+#3287=STYLED_ITEM('color',(#3224),#1834);+#3288=STYLED_ITEM('color',(#3224),#1843);+#3289=STYLED_ITEM('color',(#3224),#1852);+#3290=STYLED_ITEM('color',(#3224),#1861);+#3291=STYLED_ITEM('color',(#3224),#1870);+#3292=STYLED_ITEM('color',(#3224),#1879);+#3293=STYLED_ITEM('color',(#3224),#1888);+#3294=STYLED_ITEM('color',(#3224),#1897);+#3295=STYLED_ITEM('color',(#3224),#1906);+#3296=STYLED_ITEM('color',(#3224),#1915);+#3297=STYLED_ITEM('color',(#3200),#1924);+#3298=STYLED_ITEM('color',(#3200),#1939);+#3299=STYLED_ITEM('color',(#3200),#1949);+#3300=STYLED_ITEM('color',(#3200),#1959);+#3301=STYLED_ITEM('color',(#3224),#1967);+#3302=STYLED_ITEM('color',(#3224),#1980);+#3303=STYLED_ITEM('color',(#3224),#1989);+#3304=STYLED_ITEM('color',(#3224),#1997);+#3305=STYLED_ITEM('color',(#3224),#2007);+#3306=STYLED_ITEM('color',(#3224),#2015);+#3307=STYLED_ITEM('color',(#3224),#2025);+#3308=STYLED_ITEM('color',(#3224),#2033);+#3309=STYLED_ITEM('color',(#3224),#2043);+#3310=STYLED_ITEM('color',(#3224),#2051);+#3311=STYLED_ITEM('color',(#3224),#2061);+#3312=STYLED_ITEM('color',(#3224),#2069);+#3313=STYLED_ITEM('color',(#3224),#2079);+#3314=STYLED_ITEM('color',(#3224),#2087);+#3315=STYLED_ITEM('color',(#3224),#2097);+#3316=STYLED_ITEM('color',(#3224),#2105);+#3317=STYLED_ITEM('color',(#3224),#2115);+#3318=STYLED_ITEM('color',(#3224),#2123);+#3319=STYLED_ITEM('color',(#3224),#2133);+#3320=STYLED_ITEM('color',(#3224),#2141);+#3321=STYLED_ITEM('color',(#3224),#2151);+#3322=STYLED_ITEM('color',(#3224),#2159);+#3323=STYLED_ITEM('color',(#3224),#2169);+#3324=STYLED_ITEM('color',(#3224),#2177);+#3325=STYLED_ITEM('color',(#3224),#2187);+#3326=STYLED_ITEM('color',(#3200),#2195);+#3327=STYLED_ITEM('color',(#3200),#2201);+#3328=STYLED_ITEM('color',(#3200),#2449);+#3329=STYLED_ITEM('color',(#3224),#2452);+#3330=STYLED_ITEM('color',(#3224),#2474);+#3331=STYLED_ITEM('color',(#3224),#2488);+#3332=STYLED_ITEM('color',(#3224),#2502);+#3333=STYLED_ITEM('color',(#3224),#2514);+#3334=STYLED_ITEM('color',(#3224),#2534);+#3335=STYLED_ITEM('color',(#3224),#2549);+#3336=STYLED_ITEM('color',(#3224),#2563);+#3337=STYLED_ITEM('color',(#3224),#2573);+#3338=STYLED_ITEM('color',(#3224),#2593);+#3339=STYLED_ITEM('color',(#3224),#2608);+#3340=STYLED_ITEM('color',(#3224),#2622);+#3341=STYLED_ITEM('color',(#3224),#2632);+#3342=STYLED_ITEM('color',(#3224),#2652);+#3343=STYLED_ITEM('color',(#3224),#2667);+#3344=STYLED_ITEM('color',(#3224),#2681);+#3345=STYLED_ITEM('color',(#3224),#2691);+#3346=STYLED_ITEM('color',(#3224),#2711);+#3347=STYLED_ITEM('color',(#3224),#2726);+#3348=STYLED_ITEM('color',(#3224),#2740);+#3349=STYLED_ITEM('color',(#3224),#2750);+#3350=STYLED_ITEM('color',(#3224),#2770);+#3351=STYLED_ITEM('color',(#3224),#2785);+#3352=STYLED_ITEM('color',(#3224),#2799);+#3353=STYLED_ITEM('color',(#3224),#2809);+#3354=STYLED_ITEM('color',(#3224),#2829);+#3355=STYLED_ITEM('color',(#3224),#2844);+#3356=STYLED_ITEM('color',(#3224),#2858);+#3357=STYLED_ITEM('color',(#3224),#2868);+#3358=STYLED_ITEM('color',(#3224),#2888);+#3359=STYLED_ITEM('color',(#3224),#2903);+#3360=STYLED_ITEM('color',(#3224),#2917);+#3361=STYLED_ITEM('color',(#3224),#2927);+#3362=STYLED_ITEM('color',(#3224),#2947);+#3363=STYLED_ITEM('color',(#3224),#2962);+#3364=STYLED_ITEM('color',(#3224),#2976);+#3365=STYLED_ITEM('color',(#3224),#2986);+#3366=STYLED_ITEM('color',(#3224),#3006);+#3367=STYLED_ITEM('color',(#3224),#3021);+#3368=STYLED_ITEM('color',(#3224),#3035);+#3369=STYLED_ITEM('color',(#3224),#3045);+#3370=STYLED_ITEM('color',(#3224),#3065);+#3371=STYLED_ITEM('color',(#3224),#3080);+#3372=STYLED_ITEM('color',(#3224),#3094);+#3373=STYLED_ITEM('color',(#3224),#3104);+#3374=STYLED_ITEM('color',(#3224),#3112);+#3375=STYLED_ITEM('color',(#3224),#3120);+#3376=STYLED_ITEM('color',(#3224),#3128);+#3377=STYLED_ITEM('color',(#3224),#3136);+#3378=STYLED_ITEM('color',(#3224),#3144);+#3379=STYLED_ITEM('color',(#3224),#3152);+#3380=STYLED_ITEM('color',(#3224),#3160);+#3381=STYLED_ITEM('color',(#3224),#3168);+#3382=STYLED_ITEM('color',(#3224),#3176);+#3383=STYLED_ITEM('color',(#3224),#3184);+ENDSEC;+END-ISO-10303-21;

@@ -0,0 +1,190 @@+{+  "slug": "afc10-s11qca-00",+  "version": "0.1.0",+  "type": "component",+  "description": "JUSHUO Wire To Board Connector, SMD,P=1mm,卧贴. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "connectors",+    "afc10-s11qca-00",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "afc10-s11qca-00.kicad_sym",+    "afc10-s11qca-00.kicad_mod",+    "afc10-s11qca-00.glb",+    "afc10-s11qca-00.step",+    "afc10-s11qca-00.lbr",+    "docs/hero.png",+    "docs/afc10-s11qca-00-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "afc10-s11qca-00-hero.glb",+    "afc10-s11qca-00-hero.overlay.json"+  ],+  "component": {+    "mpn": "AFC10-S11QCA-00",+    "manufacturer": "JUSHUO",+    "package": "JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal",+    "pin_count": 11,+    "category": "Connectors",+    "subcategory": "Wire To Board Connector",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897308016173056",+    "parts": {+      "symbol": "afc10-s11qca-00.kicad_sym",+      "footprint": "afc10-s11qca-00.kicad_mod",+      "model_3d": "afc10-s11qca-00-hero.glb",+      "model_3d_step": "afc10-s11qca-00.step",+      "lbr": "afc10-s11qca-00.lbr",+      "model_3d_plain": "afc10-s11qca-00.glb"+    },+    "distributor_links": {+      "lcsc": "C2764190"+    },+    "distributor_check": {+      "checked_at": "2026-11-06T10:02:25Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "quota"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Contact 1; numbering follows the footprint."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Contact 2; numbering follows the footprint."+      },+      {+        "number": "3",+        "name": "3",+        "type": "passive",+        "description": "Contact 3; numbering follows the footprint."+      },+      {+        "number": "4",+        "name": "4",+        "type": "passive",+        "description": "Contact 4; numbering follows the footprint."+      },+      {+        "number": "5",+        "name": "5",+        "type": "passive",+        "description": "Contact 5; numbering follows the footprint."+      },+      {+        "number": "6",+        "name": "6",+        "type": "passive",+        "description": "Contact 6; numbering follows the footprint."+      },+      {+        "number": "7",+        "name": "7",+        "type": "passive",+        "description": "Contact 7; numbering follows the footprint."+      },+      {+        "number": "8",+        "name": "8",+        "type": "passive",+        "description": "Contact 8; numbering follows the footprint."+      },+      {+        "number": "9",+        "name": "9",+        "type": "passive",+        "description": "Contact 9; numbering follows the footprint."+      },+      {+        "number": "10",+        "name": "10",+        "type": "passive",+        "description": "Contact 10; numbering follows the footprint."+      },+      {+        "number": "11",+        "name": "11",+        "type": "passive",+        "description": "Contact 11; numbering follows the footprint."+      }+    ],+    "provenance": {+      "extractor": "extract_pins",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins",+        "primary_model": "connector numbering",+        "primary_mode": "convention",+        "consensus_model": null,+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "footprint has thermal pad ['MP'] the extraction did not name",+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": null,+        "cost_usd": 0,+        "at": "2026-11-06T10:02:20"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897308016173056",+        "pages": 10,+        "sha256": "",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "afc10-s11qca-00.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          13.0,+          4.95,+          2.96+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "eee1ce50dddedfd3415167ee4c5779773cf497af5d802b0c702aa6a2572a8e72",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}

@@ -0,0 +1,196 @@+{+  "slug": "afc10-s11qca-00",+  "version": "0.1.0",+  "type": "component",+  "description": "JUSHUO Wire To Board Connector, SMD,P=1mm,卧贴. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "connectors",+    "afc10-s11qca-00",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "afc10-s11qca-00.kicad_sym",+    "afc10-s11qca-00.kicad_mod",+    "afc10-s11qca-00.glb",+    "afc10-s11qca-00.step",+    "afc10-s11qca-00.lbr",+    "docs/hero.png",+    "docs/afc10-s11qca-00-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "afc10-s11qca-00-hero.glb",+    "afc10-s11qca-00-hero.overlay.json"+  ],+  "component": {+    "mpn": "AFC10-S11QCA-00",+    "manufacturer": "JUSHUO",+    "package": "JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal",+    "pin_count": 11,+    "category": "Connectors",+    "subcategory": "Wire To Board Connector",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897308016173056",+    "parts": {+      "symbol": "afc10-s11qca-00.kicad_sym",+      "footprint": "afc10-s11qca-00.kicad_mod",+      "model_3d": "afc10-s11qca-00-hero.glb",+      "model_3d_step": "afc10-s11qca-00.step",+      "lbr": "afc10-s11qca-00.lbr",+      "model_3d_plain": "afc10-s11qca-00.glb"+    },+    "distributor_links": {+      "lcsc": "C2764190"+    },+    "distributor_check": {+      "checked_at": "2026-11-06T10:02:25Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "quota"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Contact 1; numbering follows the footprint."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Contact 2; numbering follows the footprint."+      },+      {+        "number": "3",+        "name": "3",+        "type": "passive",+        "description": "Contact 3; numbering follows the footprint."+      },+      {+        "number": "4",+        "name": "4",+        "type": "passive",+        "description": "Contact 4; numbering follows the footprint."+      },+      {+        "number": "5",+        "name": "5",+        "type": "passive",+        "description": "Contact 5; numbering follows the footprint."+      },+      {+        "number": "6",+        "name": "6",+        "type": "passive",+        "description": "Contact 6; numbering follows the footprint."+      },+      {+        "number": "7",+        "name": "7",+        "type": "passive",+        "description": "Contact 7; numbering follows the footprint."+      },+      {+        "number": "8",+        "name": "8",+        "type": "passive",+        "description": "Contact 8; numbering follows the footprint."+      },+      {+        "number": "9",+        "name": "9",+        "type": "passive",+        "description": "Contact 9; numbering follows the footprint."+      },+      {+        "number": "10",+        "name": "10",+        "type": "passive",+        "description": "Contact 10; numbering follows the footprint."+      },+      {+        "number": "11",+        "name": "11",+        "type": "passive",+        "description": "Contact 11; numbering follows the footprint."+      }+    ],+    "provenance": {+      "extractor": "extract_pins",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins",+        "primary_model": "connector numbering",+        "primary_mode": "convention",+        "consensus_model": null,+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "footprint has thermal pad ['MP'] the extraction did not name",+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": null,+        "cost_usd": 0,+        "at": "2026-11-06T10:02:20"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897308016173056",+        "pages": 10,+        "sha256": "",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "afc10-s11qca-00.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          13,+          4.95,+          2.96+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "eee1ce50dddedfd3415167ee4c5779773cf497af5d802b0c702aa6a2572a8e72",+        "checked": "2026-11-06",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file