ADXL345BCCZ

@@ -1,13 +1,176 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "adxl345bccz",+  "title": "ADXL345BCCZ",+  "brief": "Analog Devices Accelerometers, LGA-14(3x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Analog Devices Accelerometers, LGA-14(3x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensors",     "adxl345bccz"   ],+  "component": {+    "mpn": "ADXL345BCCZ",+    "manufacturer": "Analog Devices",+    "package": "LGA-14(3x5)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886680593555456",+    "parts": {+      "symbol": "adxl345bccz.kicad_sym",+      "footprint": "adxl345bccz.kicad_mod",+      "model_3d": "adxl345bccz.glb",+      "model_3d_step": "adxl345bccz.step",+      "lbr": "adxl345bccz.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VDD_I/O",+        "type": "power_in",+        "description": "Digital interface supply voltage. Range 1.7 V to VS; typically 1.8 V. Powers the I2C/SPI I/O buffers and sets the logic level of digital pins."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground. Must be connected to ground."+      },+      {+        "number": "3",+        "name": "RESERVED",+        "type": "passive",+        "description": "Reserved. Must be connected to VS or left open (not connected)."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground. Must be connected to ground."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground. Must be connected to ground."+      },+      {+        "number": "6",+        "name": "VS",+        "type": "power_in",+        "description": "Analog/core supply voltage. Range 2.0 V to 3.6 V; typically 2.5 V. Main supply for the accelerometer sensor and analog front-end."+      },+      {+        "number": "7",+        "name": "CS",+        "type": "input",+        "description": "Chip select (active low). Tie high (to VDD_I/O) to select I2C mode; drive from an SPI master to select SPI mode. Includes the interface-mode selector between I2C and SPI."+      },+      {+        "number": "8",+        "name": "INT1",+        "type": "output",+        "description": "Interrupt 1 output. Programmable interrupt (tap, activity/inactivity, free-fall, data ready, watermark, overrun) whose polarity is configurable via the DATA_FORMAT register."+      },+      {+        "number": "9",+        "name": "INT2",+        "type": "output",+        "description": "Interrupt 2 output. Second programmable interrupt channel; any of the same events can be routed here via the INT_MAP register."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave open or tie to ground for mechanical support."+      },+      {+        "number": "11",+        "name": "RESERVED",+        "type": "passive",+        "description": "Reserved. Must be connected to ground or left open (not connected)."+      },+      {+        "number": "12",+        "name": "SDO/ALT_ADDRESS",+        "type": "bidirectional",+        "description": "In SPI 4-wire mode this is the serial data output (SDO). In I2C mode this pin selects the alternate 7-bit I2C address (tie low for 0x53, tie high for 0x1D)."+      },+      {+        "number": "13",+        "name": "SDA/SDI/SDIO",+        "type": "bidirectional",+        "description": "Serial data. In I2C mode this is SDA (open-drain, bidirectional). In SPI 4-wire mode this is SDI (data in to the ADXL345). In SPI 3-wire mode this pin is the bidirectional SDIO."+      },+      {+        "number": "14",+        "name": "SCL/SCLK",+        "type": "input",+        "description": "Serial communications clock. SCL in I2C mode, SCLK in SPI mode. Also functions as an I2C/SPI protocol clock line shared across the two interfaces."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886680593555456",+        "pages": 40,+        "sha256": "230a78d03d36a94d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Analog Devices",+      "Package": "LGA-14(3x5)",+      "Category": "Sensors",+      "Pins": "14"+    }+  },+  "variants": [+    {+      "mpn": "ADXL345BCCZ",+      "kind": "packaging"+    },+    {+      "mpn": "ADXL345BCCZ-RL",+      "kind": "packaging"+    },+    {+      "mpn": "ADXL345BCCZ-RL7",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "adxl345bccz"+  ],+  "discovery_pitch": "ADXL345BCCZ (Analog Devices) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +188,5 @@     "docs/adxl345bccz-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file