component
ADS8332IRGER
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# ADS8332IRGER++**Texas Instruments** · Analog To Digital Converters (ADC) · VQFN-24-EP(4x4)++ADS8332IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN4 | input | Mux input 4 (part of IN[0:7] on the ADS8332). |+| 2 | IN5 | input | Mux input 5 (part of IN[0:7] on the ADS8332). |+| 3 | IN6 | input | Mux input 6 (part of IN[0:7] on the ADS8332). |+| 4 | IN7 | input | Mux input 7 (part of IN[0:7] on the ADS8332). |+| 5 | RESET | input | External reset, active low. |+| 6 | EOC/INT/CDI | bidirectional | Status output (EOC low during conversion by default, or INT low after end of conversion and high after FS/CS goes low, polarity programmable), also usable as chain data input (CDI) in daisy-chain mode. |+| 7 | SCLK | input | SPI clock for the serial interface. |+| 8 | FS/CS | input | Frame sync signal for a DSP (such as TMS320) or chip select input for SPI. |+| 9 | SDI | input | SPI serial data in. |+| 10 | SDO | output | SPI serial data out. |+| 11 | DGND | power_in | Digital interface ground. |+| 12 | CONVST | input | Conversion start; freezes sample and hold and starts conversion. |+| 13 | VBD | power_in | Digital interface supply, 1.65 V to VA + 0.2 V recommended operating range. |+| 14 | VA | power_in | Analog supply, 2.7 V to 5.5 V. |+| 15 | REF+ | input | External reference input. |+| 16 | REF- | power_in | External reference ground, connect to AGND through an individual via on the printed-circuit board. |+| 17 | AGND | power_in | Analog ground. |+| 18 | ADCIN | input | ADC input. |+| 19 | MUXOUT | output | Mux output. |+| 20 | COM | input | Common ADC input, usually connected to AGND. |+| 21 | IN0 | input | Mux input 0 (part of IN[0:7]). |+| 22 | IN1 | input | Mux input 1 (part of IN[0:7]). |+| 23 | IN2 | input | Mux input 2 (part of IN[0:7]). |+| 24 | IN3 | input | Mux input 3 (part of IN[0:7]). |+| 25 | PAD | power_in | Exposed thermal pad on the bottom side; connect to analog ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Data Acquisition |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `ADS8332IRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ads8332irger-etched.step` / `ads8332irger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads8332irger.step` / `ads8332irger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads8331) (62 pp, sha256 `6d4028ed191231f0`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads8332irger-datasheet.pdf)
page.jsonadded+263@@ -0,0 +1,263 @@+{+ "slug": "ads8332irger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads8332irger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads8332irger.kicad_sym",+ "ads8332irger.kicad_mod",+ "ads8332irger.glb",+ "ads8332irger.step",+ "ads8332irger.lbr",+ "docs/hero.png",+ "docs/ads8332irger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads8332irger-hero.glb",+ "ads8332irger-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS8332IRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads8331",+ "parts": {+ "symbol": "ads8332irger.kicad_sym",+ "footprint": "ads8332irger.kicad_mod",+ "model_3d": "ads8332irger-hero.glb",+ "model_3d_plain": "ads8332irger.glb",+ "model_3d_step": "ads8332irger-etched.step",+ "model_3d_step_plain": "ads8332irger.step",+ "lbr": "ads8332irger.lbr"+ },+ "distributor_links": {+ "lcsc": 2670522,+ "digikey": "ADS8332IRGER-ND",+ "mouser": "595-ADS8332IRGER"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T03:31:31Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "ADS8332IRGER-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-ADS8332IRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN4",+ "type": "input",+ "description": "Mux input 4 (part of IN[0:7] on the ADS8332)."+ },+ {+ "number": "2",+ "name": "IN5",+ "type": "input",+ "description": "Mux input 5 (part of IN[0:7] on the ADS8332)."+ },+ {+ "number": "3",+ "name": "IN6",+ "type": "input",+ "description": "Mux input 6 (part of IN[0:7] on the ADS8332)."+ },+ {+ "number": "4",+ "name": "IN7",+ "type": "input",+ "description": "Mux input 7 (part of IN[0:7] on the ADS8332)."+ },+ {+ "number": "5",+ "name": "RESET",+ "type": "input",+ "description": "External reset, active low."+ },+ {+ "number": "6",+ "name": "EOC/INT/CDI",+ "type": "bidirectional",+ "description": "Status output (EOC low during conversion by default, or INT low after end of conversion and high after FS/CS goes low, polarity programmable), also usable as chain data input (CDI) in daisy-chain mode."+ },+ {+ "number": "7",+ "name": "SCLK",+ "type": "input",+ "description": "SPI clock for the serial interface."+ },+ {+ "number": "8",+ "name": "FS/CS",+ "type": "input",+ "description": "Frame sync signal for a DSP (such as TMS320) or chip select input for SPI."+ },+ {+ "number": "9",+ "name": "SDI",+ "type": "input",+ "description": "SPI serial data in."+ },+ {+ "number": "10",+ "name": "SDO",+ "type": "output",+ "description": "SPI serial data out."+ },+ {+ "number": "11",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital interface ground."+ },+ {+ "number": "12",+ "name": "CONVST",+ "type": "input",+ "description": "Conversion start; freezes sample and hold and starts conversion."+ },+ {+ "number": "13",+ "name": "VBD",+ "type": "power_in",+ "description": "Digital interface supply, 1.65 V to VA + 0.2 V recommended operating range."+ },+ {+ "number": "14",+ "name": "VA",+ "type": "power_in",+ "description": "Analog supply, 2.7 V to 5.5 V."+ },+ {+ "number": "15",+ "name": "REF+",+ "type": "input",+ "description": "External reference input."+ },+ {+ "number": "16",+ "name": "REF-",+ "type": "power_in",+ "description": "External reference ground, connect to AGND through an individual via on the printed-circuit board."+ },+ {+ "number": "17",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "18",+ "name": "ADCIN",+ "type": "input",+ "description": "ADC input."+ },+ {+ "number": "19",+ "name": "MUXOUT",+ "type": "output",+ "description": "Mux output."+ },+ {+ "number": "20",+ "name": "COM",+ "type": "input",+ "description": "Common ADC input, usually connected to AGND."+ },+ {+ "number": "21",+ "name": "IN0",+ "type": "input",+ "description": "Mux input 0 (part of IN[0:7])."+ },+ {+ "number": "22",+ "name": "IN1",+ "type": "input",+ "description": "Mux input 1 (part of IN[0:7])."+ },+ {+ "number": "23",+ "name": "IN2",+ "type": "input",+ "description": "Mux input 2 (part of IN[0:7])."+ },+ {+ "number": "24",+ "name": "IN3",+ "type": "input",+ "description": "Mux input 3 (part of IN[0:7])."+ },+ {+ "number": "25",+ "name": "PAD",+ "type": "power_in",+ "description": "Exposed thermal pad on the bottom side; connect to analog ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 6 (EOC/INT/CDI) has multiple functional modes: configurable as end-of-conversion output, interru; Exposed thermal pad (EP) on bottom side must be connected to AGND but is not assigned a numbered pin",+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 11,+ "cost_usd": 0.1438,+ "at": "2026-10-06T03:31:17"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads8331",+ "pages": 62,+ "sha256": "6d4028ed191231f0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}