component
ADS8332IPW
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+60@@ -0,0 +1,60 @@+# ADS8332IPW++**Texas Instruments** · Analog To Digital Converters (ADCs) · TSSOP-24++ADS8332IPW from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN1 | input | Mux analog input channel 1 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 2 | IN2 | input | Mux analog input channel 2 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 3 | IN3 | input | Mux analog input channel 3 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 4 | IN4 | input | Mux analog input channel 4 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 5 | IN5 | input | Mux analog input channel 5 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 6 | IN6 | input | Mux analog input channel 6 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 7 | IN7 | input | Mux analog input channel 7 of the ADS8332 8-to-1 unipolar input multiplexer. |+| 8 | RESET | input | External reset input, active low. |+| 9 | EOC/INT/CDI | bidirectional | Status output programmable as end-of-conversion (EOC) or interrupt (INT) with programmable polarity, which can also serve as chain data input (CDI) in daisy-chain mode. |+| 10 | SCLK | input | SPI serial clock input for the serial interface. |+| 11 | FS/CS | input | Frame sync input for DSP operation or chip select input for SPI operation. |+| 12 | SDI | input | SPI serial data input. |+| 13 | SDO | output | SPI serial data output. |+| 14 | DGND | power_in | Digital interface ground. |+| 15 | CONVST | input | Conversion start input that freezes the sample-and-hold and starts a conversion; global and independent of CS. |+| 16 | VBD | power_in | Digital interface supply, 1.65 V to VA + 0.2 V (recommended operating range). |+| 17 | VA | power_in | Analog supply, 2.7 V to 5.5 V. |+| 18 | REF+ | input | External reference input. |+| 19 | REF- | power_in | External reference ground; connect to AGND through an individual via on the printed-circuit board. |+| 20 | AGND | power_in | Analog ground. |+| 21 | ADCIN | input | ADC analog input to the converter. |+| 22 | MUXOUT | output | Multiplexer output. |+| 23 | COM | input | Common ADC input, usually connected to AGND; absolute maximum rating for COM and REF- to AGND is -0.3 V to 0.3 V. |+| 24 | IN0 | input | Mux analog input channel 0 of the ADS8332 8-to-1 unipolar input multiplexer. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | ADC/DAC/Data Conversion |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `ADS8332IPW`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `ads8332ipw-etched.step` / `ads8332ipw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads8332ipw.step` / `ads8332ipw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads8331) (62 pp, sha256 `6d4028ed191231f0`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads8332ipw-datasheet.pdf)
page.jsonadded+295@@ -0,0 +1,295 @@+{+ "slug": "ads8332ipw",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADCs), TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "adc-dac-data conversion",+ "ads8332ipw",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads8332ipw.kicad_sym",+ "ads8332ipw.kicad_mod",+ "ads8332ipw.glb",+ "ads8332ipw.step",+ "ads8332ipw.lbr",+ "docs/hero.png",+ "docs/ads8332ipw-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads8332ipw-hero.glb",+ "ads8332ipw-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS8332IPW",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-24",+ "pin_count": 24,+ "category": "ADC/DAC/Data Conversion",+ "subcategory": "Analog To Digital Converters (ADCs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads8331",+ "parts": {+ "symbol": "ads8332ipw.kicad_sym",+ "footprint": "ads8332ipw.kicad_mod",+ "model_3d": "ads8332ipw-hero.glb",+ "model_3d_plain": "ads8332ipw.glb",+ "model_3d_step": "ads8332ipw-etched.step",+ "model_3d_step_plain": "ads8332ipw.step",+ "lbr": "ads8332ipw.lbr"+ },+ "distributor_links": {+ "lcsc": "C1542620",+ "digikey": "296-28119-ND",+ "mouser": "595-ADS8332IPW"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T14:39:18Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-28119-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-ADS8332IPW",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN1",+ "type": "input",+ "description": "Mux analog input channel 1 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "2",+ "name": "IN2",+ "type": "input",+ "description": "Mux analog input channel 2 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "3",+ "name": "IN3",+ "type": "input",+ "description": "Mux analog input channel 3 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "4",+ "name": "IN4",+ "type": "input",+ "description": "Mux analog input channel 4 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "5",+ "name": "IN5",+ "type": "input",+ "description": "Mux analog input channel 5 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "6",+ "name": "IN6",+ "type": "input",+ "description": "Mux analog input channel 6 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "7",+ "name": "IN7",+ "type": "input",+ "description": "Mux analog input channel 7 of the ADS8332 8-to-1 unipolar input multiplexer."+ },+ {+ "number": "8",+ "name": "RESET",+ "type": "input",+ "description": "External reset input, active low."+ },+ {+ "number": "9",+ "name": "EOC/INT/CDI",+ "type": "bidirectional",+ "description": "Status output programmable as end-of-conversion (EOC) or interrupt (INT) with programmable polarity, which can also serve as chain data input (CDI) in daisy-chain mode."+ },+ {+ "number": "10",+ "name": "SCLK",+ "type": "input",+ "description": "SPI serial clock input for the serial interface."+ },+ {+ "number": "11",+ "name": "FS/CS",+ "type": "input",+ "description": "Frame sync input for DSP operation or chip select input for SPI operation."+ },+ {+ "number": "12",+ "name": "SDI",+ "type": "input",+ "description": "SPI serial data input."+ },+ {+ "number": "13",+ "name": "SDO",+ "type": "output",+ "description": "SPI serial data output."+ },+ {+ "number": "14",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital interface ground."+ },+ {+ "number": "15",+ "name": "CONVST",+ "type": "input",+ "description": "Conversion start input that freezes the sample-and-hold and starts a conversion; global and independent of CS."+ },+ {+ "number": "16",+ "name": "VBD",+ "type": "power_in",+ "description": "Digital interface supply, 1.65 V to VA + 0.2 V (recommended operating range)."+ },+ {+ "number": "17",+ "name": "VA",+ "type": "power_in",+ "description": "Analog supply, 2.7 V to 5.5 V."+ },+ {+ "number": "18",+ "name": "REF+",+ "type": "input",+ "description": "External reference input."+ },+ {+ "number": "19",+ "name": "REF-",+ "type": "power_in",+ "description": "External reference ground; connect to AGND through an individual via on the printed-circuit board."+ },+ {+ "number": "20",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "21",+ "name": "ADCIN",+ "type": "input",+ "description": "ADC analog input to the converter."+ },+ {+ "number": "22",+ "name": "MUXOUT",+ "type": "output",+ "description": "Multiplexer output."+ },+ {+ "number": "23",+ "name": "COM",+ "type": "input",+ "description": "Common ADC input, usually connected to AGND; absolute maximum rating for COM and REF- to AGND is -0.3 V to 0.3 V."+ },+ {+ "number": "24",+ "name": "IN0",+ "type": "input",+ "description": "Mux analog input channel 0 of the ADS8332 8-to-1 unipolar input multiplexer."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Datasheet lists EOC/INT/CDI as O/O/I (output for EOC or INT, input for CDI in daisy-chain mode); typ; REF- has no I/O type given in the pin table (shown as —); typed as power_in because it is the extern; The ADS8332 TSSOP pin table gives IN[0:7] as pins '1-7, 24' without listing each channel. Per-channe"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0817,+ "at": "2026-10-08T14:38:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads8331",+ "pages": 62,+ "sha256": "6d4028ed191231f0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads8332ipw.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 7.8,+ 0.97+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads8332ipw-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 7.8,+ 0.97+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "67f3b7215c1c9996954c0a1ed3543dd5b5eb4ae65f1d1ab3f55d0be4dedd82ab",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}