← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# ADS7958SRGER++**Texas Instruments** · Analog To Digital Converters (ADC) · VQFN-24-EP(4x4)++ADS7958SRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | +VA | power_in | Analog power supply (2.7V to 5.25V required for ADC operation) |+| 2 | AGND | power_in | Analog ground reference for all analog circuits and input channels |+| 3 | MXO | output | Multiplexer output; analog channel output before ADC input AINP |+| 4 | AINP | input | ADC positive input signal (0 to VREF for Range 1 or 0 to 2×VREF for Range 2) |+| 5 | AINM | input | ADC negative input and reference ground for the analog-to-digital converter |+| 6 | NC | unconnected | No internal connection; must connect to ground to avoid floating pins |+| 7 | NC | unconnected | No internal connection; must connect to ground to avoid floating pins |+| 8 | Ch3 | input | Analog multiplexer channel 3 input for 4-channel operation |+| 9 | Ch2 | input | Analog multiplexer channel 2 input for 4-channel operation |+| 10 | Ch1 | input | Analog multiplexer channel 1 input for 4-channel operation |+| 11 | Ch0 | input | Analog multiplexer channel 0 input for 4-channel operation |+| 12 | NC | unconnected | No internal connection; must connect to ground to avoid floating pins |+| 13 | NC | unconnected | No internal connection; must connect to ground to avoid floating pins |+| 14 | +VA | power_in | Analog power supply (2.7V to 5.25V required for ADC operation) |+| 15 | AGND | power_in | Analog ground reference for all analog circuits and input channels |+| 16 | CS | input | Chip-select input pin active low; falling edge initiates conversion and sampling |+| 17 | SCLK | input | Serial clock input pin for SPI interface (up to 20 MHz frequency) |+| 18 | SDI | input | Serial data input pin for SPI interface (command and configuration data) |+| 19 | SDO | output | Serial data output pin for SPI interface (8-bit conversion result with 4-bit address) |+| 20 | BDGND | power_in | Digital ground reference for all digital I/O and logic circuits |+| 21 | +VBD | power_in | Digital I/O supply voltage (1.7V to 5.25V); must be ≤ +VA |+| 22 | GPIO0 | bidirectional | Programmable general-purpose I/O; configurable as input/output or alarm output |+| 23 | REFM | input | External reference voltage ground; connect to analog ground via 10µF capacitor to REFP |+| 24 | REFP | input | External reference voltage input (2.0V to 3.0V typical 2.5V) with 10µF ceramic capacitor to REFM |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Data Acquisition |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `ADS7958SRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ads7958srger-etched.step` / `ads7958srger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads7958srger.step` / `ads7958srger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads7955) (87 pp, sha256 `8ef9ce324ee60500`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads7958srger-datasheet.pdf)
page.jsonadded+261@@ -0,0 +1,261 @@+{+ "slug": "ads7958srger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads7958srger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads7958srger.kicad_sym",+ "ads7958srger.kicad_mod",+ "ads7958srger.glb",+ "ads7958srger.step",+ "ads7958srger.lbr",+ "docs/hero.png",+ "docs/ads7958srger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "ADS7958SRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads7955",+ "parts": {+ "symbol": "ads7958srger.kicad_sym",+ "footprint": "ads7958srger.kicad_mod",+ "model_3d": "ads7958srger-etched.glb",+ "model_3d_plain": "ads7958srger.glb",+ "model_3d_step": "ads7958srger-etched.step",+ "model_3d_step_plain": "ads7958srger.step",+ "lbr": "ads7958srger.lbr"+ },+ "distributor_links": {+ "lcsc": "C2871486",+ "digikey": "296-ADS7958SRGERTR-ND",+ "mouser": "595-ADS7958SRGER"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T01:27:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-ADS7958SRGERTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-ADS7958SRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "+VA",+ "type": "power_in",+ "description": "Analog power supply (2.7V to 5.25V required for ADC operation)"+ },+ {+ "number": "2",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground reference for all analog circuits and input channels"+ },+ {+ "number": "3",+ "name": "MXO",+ "type": "output",+ "description": "Multiplexer output; analog channel output before ADC input AINP"+ },+ {+ "number": "4",+ "name": "AINP",+ "type": "input",+ "description": "ADC positive input signal (0 to VREF for Range 1 or 0 to 2×VREF for Range 2)"+ },+ {+ "number": "5",+ "name": "AINM",+ "type": "input",+ "description": "ADC negative input and reference ground for the analog-to-digital converter"+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; must connect to ground to avoid floating pins"+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; must connect to ground to avoid floating pins"+ },+ {+ "number": "8",+ "name": "Ch3",+ "type": "input",+ "description": "Analog multiplexer channel 3 input for 4-channel operation"+ },+ {+ "number": "9",+ "name": "Ch2",+ "type": "input",+ "description": "Analog multiplexer channel 2 input for 4-channel operation"+ },+ {+ "number": "10",+ "name": "Ch1",+ "type": "input",+ "description": "Analog multiplexer channel 1 input for 4-channel operation"+ },+ {+ "number": "11",+ "name": "Ch0",+ "type": "input",+ "description": "Analog multiplexer channel 0 input for 4-channel operation"+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; must connect to ground to avoid floating pins"+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; must connect to ground to avoid floating pins"+ },+ {+ "number": "14",+ "name": "+VA",+ "type": "power_in",+ "description": "Analog power supply (2.7V to 5.25V required for ADC operation)"+ },+ {+ "number": "15",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground reference for all analog circuits and input channels"+ },+ {+ "number": "16",+ "name": "CS",+ "type": "input",+ "description": "Chip-select input pin active low; falling edge initiates conversion and sampling"+ },+ {+ "number": "17",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input pin for SPI interface (up to 20 MHz frequency)"+ },+ {+ "number": "18",+ "name": "SDI",+ "type": "input",+ "description": "Serial data input pin for SPI interface (command and configuration data)"+ },+ {+ "number": "19",+ "name": "SDO",+ "type": "output",+ "description": "Serial data output pin for SPI interface (8-bit conversion result with 4-bit address)"+ },+ {+ "number": "20",+ "name": "BDGND",+ "type": "power_in",+ "description": "Digital ground reference for all digital I/O and logic circuits"+ },+ {+ "number": "21",+ "name": "+VBD",+ "type": "power_in",+ "description": "Digital I/O supply voltage (1.7V to 5.25V); must be ≤ +VA"+ },+ {+ "number": "22",+ "name": "GPIO0",+ "type": "bidirectional",+ "description": "Programmable general-purpose I/O; configurable as input/output or alarm output"+ },+ {+ "number": "23",+ "name": "REFM",+ "type": "input",+ "description": "External reference voltage ground; connect to analog ground via 10µF capacitor to REFP"+ },+ {+ "number": "24",+ "name": "REFP",+ "type": "input",+ "description": "External reference voltage input (2.0V to 3.0V typical 2.5V) with 10µF ceramic capacitor to REFM"+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: NC pins (6, 7, 12, 13) must be connected to ground per datasheet section on Pin Functions; confirmed",+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 87,+ "cost_usd": 0.7964,+ "at": "2026-09-27T01:27:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads7955",+ "pages": 87,+ "sha256": "8ef9ce324ee60500",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}