component
ADS7829IDRBR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# ADS7829IDRBR++**Texas Instruments** · Analog To Digital Converters (ADC) · SON-8-EP(3x3)++ADS7829IDRBR from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Vref | power_in | Reference input; the reference voltage range is 0.05 V to VCC - 0.2 V for 2.7 V ≤ VCC ≤ 3.6 V. |+| 2 | +In | input | Noninverting analog input; the absolute input range is -0.2 V to VCC + 0.2 V. |+| 3 | -In | input | Inverting analog input, to be connected to ground or to a remote ground sense point; the absolute input range is -0.2 V to 1.0 V. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | CS/SHDN | input | Chip select when LOW and shutdown mode when HIGH. |+| 6 | DOUT | output | Serial output carrying a 12-bit data word that is valid on the falling edge of DCLOCK; the serial output is enabled by the second clock pulse after the falling edge of CS, followed by one null bit and then 12 data edges. |+| 7 | DCLOCK | input | Data clock that synchronizes the serial data transfer and determines the conversion speed. |+| 8 | +VCC | power_in | Power supply; operating range is 2.7 V to 3.6 V, with reduced performance down to 2.0 V and operation to 5.25 V stated in the electrical specifications. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SON-8-EP(3x3) |+| Category | Data Acquisition |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `ADS7829IDRBR`+- Footprint: `Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm`+- 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `ads7829idrbr-etched.step` / `ads7829idrbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads7829idrbr.step` / `ads7829idrbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads7829) (27 pp, sha256 `b4b976821650d89e`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads7829idrbr-datasheet.pdf)
page.jsonadded+207@@ -0,0 +1,207 @@+{+ "slug": "ads7829idrbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads7829idrbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads7829idrbr.kicad_sym",+ "ads7829idrbr.kicad_mod",+ "ads7829idrbr.glb",+ "ads7829idrbr.step",+ "ads7829idrbr.lbr",+ "docs/hero.png",+ "docs/ads7829idrbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads7829idrbr-hero.glb",+ "ads7829idrbr-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS7829IDRBR",+ "manufacturer": "Texas Instruments",+ "package": "SON-8-EP(3x3)",+ "pin_count": 9,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads7829",+ "parts": {+ "symbol": "ads7829idrbr.kicad_sym",+ "footprint": "ads7829idrbr.kicad_mod",+ "model_3d": "ads7829idrbr-hero.glb",+ "model_3d_plain": "ads7829idrbr.glb",+ "model_3d_step": "ads7829idrbr-etched.step",+ "model_3d_step_plain": "ads7829idrbr.step",+ "lbr": "ads7829idrbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2670194",+ "digikey": "ADS7829IDRBR-ND",+ "mouser": "595-ADS7829IDRBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:58:20Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "ADS7829IDRBR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-ADS7829IDRBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Vref",+ "type": "power_in",+ "description": "Reference input; the reference voltage range is 0.05 V to VCC - 0.2 V for 2.7 V ≤ VCC ≤ 3.6 V."+ },+ {+ "number": "2",+ "name": "+In",+ "type": "input",+ "description": "Noninverting analog input; the absolute input range is -0.2 V to VCC + 0.2 V."+ },+ {+ "number": "3",+ "name": "-In",+ "type": "input",+ "description": "Inverting analog input, to be connected to ground or to a remote ground sense point; the absolute input range is -0.2 V to 1.0 V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "CS/SHDN",+ "type": "input",+ "description": "Chip select when LOW and shutdown mode when HIGH."+ },+ {+ "number": "6",+ "name": "DOUT",+ "type": "output",+ "description": "Serial output carrying a 12-bit data word that is valid on the falling edge of DCLOCK; the serial output is enabled by the second clock pulse after the falling edge of CS, followed by one null bit and then 12 data edges."+ },+ {+ "number": "7",+ "name": "DCLOCK",+ "type": "input",+ "description": "Data clock that synchronizes the serial data transfer and determines the conversion speed."+ },+ {+ "number": "8",+ "name": "+VCC",+ "type": "power_in",+ "description": "Power supply; operating range is 2.7 V to 3.6 V, with reduced performance down to 2.0 V and operation to 5.25 V stated in the electrical specifications."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The package hint says SON-8-EP(3x3), but the supplied pages describe the device as PDSO (SON-8) / DR; Pin names in the Terminal Functions table (Vref, +VCC) differ from the names on the pin diagram (REF; Pin 8 is listed as +VCC with a 2.7 V to 3.6 V operating range; the 3.6 V to 5.25 V and 2.0 V to 2.7 ",+ "exposed pad 9 added from the footprint"+ ],+ "pages_sent": 10,+ "cost_usd": 0.0617,+ "at": "2026-10-08T15:57:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads7829",+ "pages": 27,+ "sha256": "b4b976821650d89e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads7829idrbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cbee016fb8ee69c44b13d8818fcf65dcf240f5fdca70b22700521eb617c5311a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads7829idrbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e73ec32224040493cd9807e7fa26e8edf558567d0ebf5e6944e331e814c37a16",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}