← Commit history

Initial commit: component/ads7280ipwr

Ray ·cac98434f6 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# ADS7280IPWR++**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-16++ADS7280IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | +VA | power_in | Analog power supply input rated 2.7V to 5.5VDC. |+| 2 | +IN1 | input | Second noninverting analog input channel for dual-channel operation. |+| 3 | +IN0 | input | First noninverting analog input channel, 0V to VREF range. |+| 4 | COM | input | Common inverting input for both analog channels, typically connected to ground. |+| 5 | AGND | power_in | Analog ground reference. |+| 6 | REF- | input | Negative reference input; connect to AGND through individual via. |+| 7 | REF+ (REFIN) | input | External voltage reference input with range 0.3V to +VA V. |+| 8 | NC | unconnected | No internal connection. |+| 9 | CONVST | input | Conversion start trigger input that freezes sample-and-hold with minimum pulse duration 40ns low. |+| 10 | EOC/INT/CDI | bidirectional | Status output programmed as EOC (low when conversion in progress), INT (low pulse after conversion), or chain data input CDI in daisy-chain mode. |+| 11 | FS/CS | input | Frame sync signal for TMS320 DSP serial interface or chip select input for SPI interface. |+| 12 | SDI | input | Serial data input for configuration and conversion start/reset commands. |+| 13 | SDO | output | Serial data output tri-stated when FS/CS is high. |+| 14 | BDGND | power_in | Digital interface ground reference. |+| 15 | SCLK | input | Serial clock input supporting DC to 50MHz frequency. |+| 16 | +VBD | power_in | Digital interface power supply rated 1.65V to 5.5VDC. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `ADS7280IPWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ads7280ipwr-etched.step` / `ads7280ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads7280ipwr.step` / `ads7280ipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads7279) (53 pp, sha256 `f95b0f88053f864b`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads7280ipwr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "ads7280ipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads7280ipwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads7280ipwr.kicad_sym",+    "ads7280ipwr.kicad_mod",+    "ads7280ipwr.glb",+    "ads7280ipwr.step",+    "ads7280ipwr.lbr",+    "docs/hero.png",+    "docs/ads7280ipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS7280IPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads7279",+    "parts": {+      "symbol": "ads7280ipwr.kicad_sym",+      "footprint": "ads7280ipwr.kicad_mod",+      "model_3d": "ads7280ipwr-etched.glb",+      "model_3d_plain": "ads7280ipwr.glb",+      "model_3d_step": "ads7280ipwr-etched.step",+      "model_3d_step_plain": "ads7280ipwr.step",+      "lbr": "ads7280ipwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2877004"+    },+    "pins": [+      {+        "number": "1",+        "name": "+VA",+        "type": "power_in",+        "description": "Analog power supply input rated 2.7V to 5.5VDC."+      },+      {+        "number": "2",+        "name": "+IN1",+        "type": "input",+        "description": "Second noninverting analog input channel for dual-channel operation."+      },+      {+        "number": "3",+        "name": "+IN0",+        "type": "input",+        "description": "First noninverting analog input channel, 0V to VREF range."+      },+      {+        "number": "4",+        "name": "COM",+        "type": "input",+        "description": "Common inverting input for both analog channels, typically connected to ground."+      },+      {+        "number": "5",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference."+      },+      {+        "number": "6",+        "name": "REF–",+        "type": "input",+        "description": "Negative reference input; connect to AGND through individual via."+      },+      {+        "number": "7",+        "name": "REF+ (REFIN)",+        "type": "input",+        "description": "External voltage reference input with range 0.3V to +VA V."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "9",+        "name": "CONVST",+        "type": "input",+        "description": "Conversion start trigger input that freezes sample-and-hold with minimum pulse duration 40ns low."+      },+      {+        "number": "10",+        "name": "EOC/INT/CDI",+        "type": "bidirectional",+        "description": "Status output programmed as EOC (low when conversion in progress), INT (low pulse after conversion), or chain data input CDI in daisy-chain mode."+      },+      {+        "number": "11",+        "name": "FS/CS",+        "type": "input",+        "description": "Frame sync signal for TMS320 DSP serial interface or chip select input for SPI interface."+      },+      {+        "number": "12",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input for configuration and conversion start/reset commands."+      },+      {+        "number": "13",+        "name": "SDO",+        "type": "output",+        "description": "Serial data output tri-stated when FS/CS is high."+      },+      {+        "number": "14",+        "name": "BDGND",+        "type": "power_in",+        "description": "Digital interface ground reference."+      },+      {+        "number": "15",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input supporting DC to 50MHz frequency."+      },+      {+        "number": "16",+        "name": "+VBD",+        "type": "power_in",+        "description": "Digital interface power supply rated 1.65V to 5.5VDC."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 53,+        "cost_usd": 0.5084,+        "at": "2026-09-23T03:16:06"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads7279",+        "pages": 53,+        "sha256": "f95b0f88053f864b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file