← Commit history

Initial commit: component/ads6244irgzr

Ray ·f5fc9e76a7 ·
2 files changed +491
README.mdadded+85
@@ -0,0 +1,85 @@+# ADS6244IRGZR++**Texas Instruments** · Analog To Digital Converters (ADC) · QFN-48-EP(7x7)++ADS6244IRGZR from Texas Instruments, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LGND | power_in | Digital ground. |+| 2 | LVDD | power_in | Digital power supply with operating range 3.0V to 3.6V. |+| 3 | CAP | passive | Connect 2nF capacitor from pin to ground. |+| 4 | RESET | input | Serial interface reset input; apply high-going pulse in serial mode to initialize internal registers or tie permanently high in parallel mode; has internal pull-down resistor. |+| 5 | LVDD | power_in | Digital power supply with operating range 3.0V to 3.6V. |+| 6 | AGND | power_in | Analog ground. |+| 7 | AVDD | power_in | Analog power supply with operating range 3.0V to 3.6V. |+| 8 | AGND | power_in | Analog ground. |+| 9 | AGND | power_in | Analog ground. |+| 10 | INA_M | input | Differential input signal pair channel A minus; must tie to VCM if unused to avoid floating. |+| 11 | INA_P | input | Differential input signal pair channel A plus; must tie to VCM if unused to avoid floating. |+| 12 | AGND | power_in | Analog ground. |+| 13 | AVDD | power_in | Analog power supply with operating range 3.0V to 3.6V. |+| 14 | NC | unconnected | Do not connect. |+| 15 | CFG4 | input | Parallel input pin controlling data format (MSB/LSB first) and 2s complement/offset binary mode selection per Table 12. |+| 16 | VCM | bidirectional | Common-mode voltage output in internal reference mode or reference voltage input (1.45V to 1.55V) in external reference mode. |+| 17 | AGND | power_in | Analog ground. |+| 18 | CLKP | input | Differential input clock pair plus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude. |+| 19 | CLKM | input | Differential input clock pair minus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude. |+| 20 | AGND | power_in | Analog ground. |+| 21 | CFG3 | input | Reserved pin, must tie to ground. |+| 22 | CFG2 | input | Parallel input pin controlling 14x/16x serialization and SDR bit clock capture edge selection per Table 10. |+| 23 | CFG1 | input | Parallel input pin controlling 1-wire/2-wire interface and DDR/SDR bit clock selection; tie to AVDD for 2-wire interface with DDR bit clock per Table 9. |+| 24 | AVDD | power_in | Analog power supply with operating range 3.0V to 3.6V. |+| 25 | AGND | power_in | Analog ground. |+| 26 | INB_P | input | Differential input signal pair channel B plus; must tie to VCM if unused to avoid floating. |+| 27 | INB_M | input | Differential input signal pair channel B minus; must tie to VCM if unused to avoid floating. |+| 28 | AGND | power_in | Analog ground. |+| 29 | AGND | power_in | Analog ground. |+| 30 | PDNB | input | Channel B ADC power down control pin; assert high to power down channel B. |+| 31 | PDNA | input | Channel A ADC power down control pin; assert high to power down channel A. |+| 32 | SEN | input | Serial interface enable input when RESET is low; controls coarse gain and internal/external reference mode when RESET is high; has internal pull-up resistor. |+| 33 | SDATA | input | Serial interface data input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor. |+| 34 | SCLK | input | Serial interface clock input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor. |+| 35 | LGND | power_in | Digital ground. |+| 36 | LVDD | power_in | Digital power supply with operating range 3.0V to 3.6V. |+| 37 | DB1_P | output | Channel B differential LVDS data output pair wire 1, positive; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 38 | DB1_M | output | Channel B differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 39 | DB0_P | output | Channel B differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 40 | DB0_M | output | Channel B differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 41 | FCLKP | output | Differential frame clock output pair, plus; serialized output with programmable termination. |+| 42 | FCLKM | output | Differential frame clock output pair, minus; serialized output with programmable termination. |+| 43 | DCLKP | output | Differential bit clock output pair, plus; derived from internal PLL multiplying input clock. |+| 44 | DCLKM | output | Differential bit clock output pair, minus; derived from internal PLL multiplying input clock. |+| 45 | DA1_P | output | Channel A differential LVDS data output pair wire 1, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 46 | DA1_M | output | Channel A differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 47 | DA0_P | output | Channel A differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 48 | DA0_M | output | Channel A differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination. |+| 49 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-48-EP(7x7) |+| Category | Data Acquisition |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `ADS6244IRGZR`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `ads6244irgzr-etched.step` / `ads6244irgzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads6244irgzr.step` / `ads6244irgzr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads6244) (76 pp, sha256 `fc1d51fd33d78c79`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads6244irgzr-datasheet.pdf)
page.jsonadded+406
@@ -0,0 +1,406 @@+{+  "slug": "ads6244irgzr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads6244irgzr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads6244irgzr.kicad_sym",+    "ads6244irgzr.kicad_mod",+    "ads6244irgzr.glb",+    "ads6244irgzr.step",+    "ads6244irgzr.lbr",+    "docs/hero.png",+    "docs/ads6244irgzr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS6244IRGZR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-48-EP(7x7)",+    "pin_count": 49,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads6244",+    "parts": {+      "symbol": "ads6244irgzr.kicad_sym",+      "footprint": "ads6244irgzr.kicad_mod",+      "model_3d": "ads6244irgzr-etched.glb",+      "model_3d_plain": "ads6244irgzr.glb",+      "model_3d_step": "ads6244irgzr-etched.step",+      "model_3d_step_plain": "ads6244irgzr.step",+      "lbr": "ads6244irgzr.lbr"+    },+    "distributor_links": {+      "lcsc": "C1543598",+      "digikey": "ADS6244IRGZR-ND",+      "mouser": "595-ADS6244IRGZR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T05:20:54Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "ADS6244IRGZR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-ADS6244IRGZR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "LGND",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "2",+        "name": "LVDD",+        "type": "power_in",+        "description": "Digital power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "3",+        "name": "CAP",+        "type": "passive",+        "description": "Connect 2nF capacitor from pin to ground."+      },+      {+        "number": "4",+        "name": "RESET",+        "type": "input",+        "description": "Serial interface reset input; apply high-going pulse in serial mode to initialize internal registers or tie permanently high in parallel mode; has internal pull-down resistor."+      },+      {+        "number": "5",+        "name": "LVDD",+        "type": "power_in",+        "description": "Digital power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "7",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "8",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "9",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "10",+        "name": "INA_M",+        "type": "input",+        "description": "Differential input signal pair channel A minus; must tie to VCM if unused to avoid floating."+      },+      {+        "number": "11",+        "name": "INA_P",+        "type": "input",+        "description": "Differential input signal pair channel A plus; must tie to VCM if unused to avoid floating."+      },+      {+        "number": "12",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "13",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "Do not connect."+      },+      {+        "number": "15",+        "name": "CFG4",+        "type": "input",+        "description": "Parallel input pin controlling data format (MSB/LSB first) and 2s complement/offset binary mode selection per Table 12."+      },+      {+        "number": "16",+        "name": "VCM",+        "type": "bidirectional",+        "description": "Common-mode voltage output in internal reference mode or reference voltage input (1.45V to 1.55V) in external reference mode."+      },+      {+        "number": "17",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "18",+        "name": "CLKP",+        "type": "input",+        "description": "Differential input clock pair plus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude."+      },+      {+        "number": "19",+        "name": "CLKM",+        "type": "input",+        "description": "Differential input clock pair minus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude."+      },+      {+        "number": "20",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "21",+        "name": "CFG3",+        "type": "input",+        "description": "Reserved pin, must tie to ground."+      },+      {+        "number": "22",+        "name": "CFG2",+        "type": "input",+        "description": "Parallel input pin controlling 14x/16x serialization and SDR bit clock capture edge selection per Table 10."+      },+      {+        "number": "23",+        "name": "CFG1",+        "type": "input",+        "description": "Parallel input pin controlling 1-wire/2-wire interface and DDR/SDR bit clock selection; tie to AVDD for 2-wire interface with DDR bit clock per Table 9."+      },+      {+        "number": "24",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "25",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "26",+        "name": "INB_P",+        "type": "input",+        "description": "Differential input signal pair channel B plus; must tie to VCM if unused to avoid floating."+      },+      {+        "number": "27",+        "name": "INB_M",+        "type": "input",+        "description": "Differential input signal pair channel B minus; must tie to VCM if unused to avoid floating."+      },+      {+        "number": "28",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "29",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "30",+        "name": "PDNB",+        "type": "input",+        "description": "Channel B ADC power down control pin; assert high to power down channel B."+      },+      {+        "number": "31",+        "name": "PDNA",+        "type": "input",+        "description": "Channel A ADC power down control pin; assert high to power down channel A."+      },+      {+        "number": "32",+        "name": "SEN",+        "type": "input",+        "description": "Serial interface enable input when RESET is low; controls coarse gain and internal/external reference mode when RESET is high; has internal pull-up resistor."+      },+      {+        "number": "33",+        "name": "SDATA",+        "type": "input",+        "description": "Serial interface data input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor."+      },+      {+        "number": "34",+        "name": "SCLK",+        "type": "input",+        "description": "Serial interface clock input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor."+      },+      {+        "number": "35",+        "name": "LGND",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "36",+        "name": "LVDD",+        "type": "power_in",+        "description": "Digital power supply with operating range 3.0V to 3.6V."+      },+      {+        "number": "37",+        "name": "DB1_P",+        "type": "output",+        "description": "Channel B differential LVDS data output pair wire 1, positive; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "38",+        "name": "DB1_M",+        "type": "output",+        "description": "Channel B differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "39",+        "name": "DB0_P",+        "type": "output",+        "description": "Channel B differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "40",+        "name": "DB0_M",+        "type": "output",+        "description": "Channel B differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "41",+        "name": "FCLKP",+        "type": "output",+        "description": "Differential frame clock output pair, plus; serialized output with programmable termination."+      },+      {+        "number": "42",+        "name": "FCLKM",+        "type": "output",+        "description": "Differential frame clock output pair, minus; serialized output with programmable termination."+      },+      {+        "number": "43",+        "name": "DCLKP",+        "type": "output",+        "description": "Differential bit clock output pair, plus; derived from internal PLL multiplying input clock."+      },+      {+        "number": "44",+        "name": "DCLKM",+        "type": "output",+        "description": "Differential bit clock output pair, minus; derived from internal PLL multiplying input clock."+      },+      {+        "number": "45",+        "name": "DA1_P",+        "type": "output",+        "description": "Channel A differential LVDS data output pair wire 1, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "46",+        "name": "DA1_M",+        "type": "output",+        "description": "Channel A differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "47",+        "name": "DA0_P",+        "type": "output",+        "description": "Channel A differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "48",+        "name": "DA0_M",+        "type": "output",+        "description": "Channel A differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."+      },+      {+        "number": "49",+        "name": "PAD",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Device supports configurable 1-wire and 2-wire output interface modes. Pinout extracted is for 2-wir; The VCM pin (16) functions as output in internal reference mode but as input in external reference m",+          "exposed pad 49 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 18,+        "cost_usd": 0.2076,+        "at": "2026-10-01T05:20:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads6244",+        "pages": 76,+        "sha256": "fc1d51fd33d78c79",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file