← Commit history

Initial commit: component/ads131m02ipwr

Ray ·bddb49018d ·
2 files changed +269
README.mdadded+57
@@ -0,0 +1,57 @@+# ADS131M02IPWR++**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-20++ADS131M02IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVDD | power_in | Analog supply voltage (2.7V to 3.6V nominal in normal operating modes; 2.4V to 3.6V in standby/current-detect modes); connect a 1-µF capacitor to AGND. |+| 2 | AGND | power_in | Analog supply ground. |+| 3 | AIN0P | input | Positive analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128). |+| 4 | AIN0N | input | Negative analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128). |+| 5 | AIN1N | input | Negative analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128). |+| 6 | AIN1P | input | Positive analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128). |+| 7 | NC | unconnected | Not connected. |+| 8 | NC | unconnected | Not connected. |+| 9 | NC | unconnected | Not connected. |+| 10 | NC | unconnected | Not connected. |+| 11 | SYNC/RESET | input | Active-low digital input for synchronization (pulse duration 1-2047 tCLKIN) or system reset (pulse duration ≥2048 tCLKIN); enables alignment of conversions with external events or hardware reset. |+| 12 | CS | input | Active-low chip select digital input; device ignores all SPI communication and DOUT remains high impedance when CS is high. |+| 13 | DRDY | output | Active-low digital output indicating new ADC conversion data available in conversion mode or current-detect threshold conditions met in current-detect mode. |+| 14 | SCLK | input | Serial clock digital input (SPI mode CPOL=0, CPHA=1); output data transition on SCLK rising edge, input data latched on falling edge. |+| 15 | DOUT | tri_state | Serial data output (SPI MISO); shifts ADC conversion data and command responses on SCLK rising edges when CS is low; assumes high-impedance state when CS is high. |+| 16 | DIN | input | Serial data input (SPI MOSI); serial commands shifted in on SCLK falling edges when CS is low. |+| 17 | CLKIN | input | Master clock input (LVCMOS); required frequency 0.3-8.4 MHz (HR mode), 0.3-4.15 MHz (LP mode), or 0.3-2.08 MHz (VLP mode) with 40-60% duty cycle; modulator frequency fMOD = fCLKIN / 2. |+| 18 | CAP | power_out | Analog output from internal digital LDO regulator (nominally 1.8V); connect a 220-nF capacitor to DGND. |+| 19 | DGND | power_in | Digital supply ground. |+| 20 | DVDD | power_in | Digital I/O supply voltage (1.8V or 3.3V supported; 2.7V to 3.6V normal operating, 1.65V to 2.0V if CAP tied to DVDD); connect a 1-µF capacitor to DGND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | Data Acquisition |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `ADS131M02IPWR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `ads131m02ipwr-etched.step` / `ads131m02ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads131m02ipwr.step` / `ads131m02ipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads131m02) (95 pp, sha256 `6165dbb0c979f300`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads131m02ipwr-datasheet.pdf)
page.jsonadded+212
@@ -0,0 +1,212 @@+{+  "slug": "ads131m02ipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads131m02ipwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads131m02ipwr.kicad_sym",+    "ads131m02ipwr.kicad_mod",+    "ads131m02ipwr.glb",+    "ads131m02ipwr.step",+    "ads131m02ipwr.lbr",+    "docs/hero.png",+    "docs/ads131m02ipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS131M02IPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads131m02",+    "parts": {+      "symbol": "ads131m02ipwr.kicad_sym",+      "footprint": "ads131m02ipwr.kicad_mod",+      "model_3d": "ads131m02ipwr-etched.glb",+      "model_3d_plain": "ads131m02ipwr.glb",+      "model_3d_step": "ads131m02ipwr-etched.step",+      "model_3d_step_plain": "ads131m02ipwr.step",+      "lbr": "ads131m02ipwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2922448"+    },+    "pins": [+      {+        "number": "1",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog supply voltage (2.7V to 3.6V nominal in normal operating modes; 2.4V to 3.6V in standby/current-detect modes); connect a 1-µF capacitor to AGND."+      },+      {+        "number": "2",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog supply ground."+      },+      {+        "number": "3",+        "name": "AIN0P",+        "type": "input",+        "description": "Positive analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."+      },+      {+        "number": "4",+        "name": "AIN0N",+        "type": "input",+        "description": "Negative analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."+      },+      {+        "number": "5",+        "name": "AIN1N",+        "type": "input",+        "description": "Negative analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."+      },+      {+        "number": "6",+        "name": "AIN1P",+        "type": "input",+        "description": "Positive analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "11",+        "name": "SYNC/RESET",+        "type": "input",+        "description": "Active-low digital input for synchronization (pulse duration 1-2047 tCLKIN) or system reset (pulse duration ≥2048 tCLKIN); enables alignment of conversions with external events or hardware reset."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Active-low chip select digital input; device ignores all SPI communication and DOUT remains high impedance when CS is high."+      },+      {+        "number": "13",+        "name": "DRDY",+        "type": "output",+        "description": "Active-low digital output indicating new ADC conversion data available in conversion mode or current-detect threshold conditions met in current-detect mode."+      },+      {+        "number": "14",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock digital input (SPI mode CPOL=0, CPHA=1); output data transition on SCLK rising edge, input data latched on falling edge."+      },+      {+        "number": "15",+        "name": "DOUT",+        "type": "tri_state",+        "description": "Serial data output (SPI MISO); shifts ADC conversion data and command responses on SCLK rising edges when CS is low; assumes high-impedance state when CS is high."+      },+      {+        "number": "16",+        "name": "DIN",+        "type": "input",+        "description": "Serial data input (SPI MOSI); serial commands shifted in on SCLK falling edges when CS is low."+      },+      {+        "number": "17",+        "name": "CLKIN",+        "type": "input",+        "description": "Master clock input (LVCMOS); required frequency 0.3-8.4 MHz (HR mode), 0.3-4.15 MHz (LP mode), or 0.3-2.08 MHz (VLP mode) with 40-60% duty cycle; modulator frequency fMOD = fCLKIN / 2."+      },+      {+        "number": "18",+        "name": "CAP",+        "type": "power_out",+        "description": "Analog output from internal digital LDO regulator (nominally 1.8V); connect a 220-nF capacitor to DGND."+      },+      {+        "number": "19",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital supply ground."+      },+      {+        "number": "20",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital I/O supply voltage (1.8V or 3.3V supported; 2.7V to 3.6V normal operating, 1.65V to 2.0V if CAP tied to DVDD); connect a 1-µF capacitor to DGND."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 95,+        "cost_usd": 0.5897,+        "at": "2026-09-17T21:24:16"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads131m02",+        "pages": 95,+        "sha256": "6165dbb0c979f300",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file