component
ADS131A02IPBS
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# ADS131A02IPBS++**Texas Instruments** · Analog To Digital Converters (ADC) · TQFP-32(5x5)++ADS131A02IPBS from Texas Instruments, in a TQFP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AIN1N | input | Negative differential analog input for channel 1. |+| 2 | AIN1P | input | Positive differential analog input for channel 1. |+| 3 | AIN2N | input | Negative differential analog input for channel 2. |+| 4 | AIN2P | input | Positive differential analog input for channel 2. |+| 5 | NC | unconnected | No connection; leave floating or connect directly to AVSS. |+| 6 | NC | unconnected | No connection; leave floating or connect directly to AVSS. |+| 7 | NC | unconnected | No connection; leave floating or connect directly to AVSS. |+| 8 | NC | unconnected | No connection; leave floating or connect directly to AVSS. |+| 9 | AVDD | power_in | Positive analog power supply requiring 1-µF bypass capacitor to AVSS. |+| 10 | AVSS | power_in | Negative analog power supply. |+| 11 | VNCP | output | Negative charge pump voltage output; connect 270-nF capacitor to AVSS when enabled or directly to AVSS when disabled. |+| 12 | REFP | output | Positive reference voltage output requiring 1-µF bypass capacitor to REFN. |+| 13 | REFN | input | Negative reference voltage input; connect to AVSS. |+| 14 | REFEXT | input | Buffered external reference voltage input requiring 1-µF bypass capacitor to AVSS when using internal reference. |+| 15 | IOVDD | power_in | Digital I/O supply voltage requiring 1-µF bypass capacitor to GND. |+| 16 | RESV | input | Reserved pin; connect to IOVDD. |+| 17 | RESET | input | Active-low system reset input. |+| 18 | DONE | output | Active-low communication done signal output. |+| 19 | DRDY | bidirectional | Active-low data ready output providing host interrupt and multi-device synchronization. |+| 20 | DIN | input | Serial data input. |+| 21 | DOUT | output | Serial data output requiring 100-kΩ pullup resistor to IOVDD. |+| 22 | SCLK | bidirectional | Serial data clock. |+| 23 | CS | input | Active-low chip select input. |+| 24 | NC | unconnected | No connection. |+| 25 | XTAL1/CLKIN | input | Master clock input or crystal oscillator buffer input. |+| 26 | XTAL2 | output | Crystal oscillator output; leave unconnected if oscillator is unused. |+| 27 | GND | power_in | Digital ground. |+| 28 | CAP | output | Digital LDO regulator output requiring 1-µF bypass capacitor to GND. |+| 29 | IOVDD | power_in | Digital I/O supply voltage requiring 1-µF bypass capacitor to GND. |+| 30 | M0 | input | SPI configuration mode; tie to IOVDD for asynchronous interrupt mode, GND for synchronous master mode, or leave floating for synchronous slave mode. |+| 31 | M1 | input | SPI word transfer size; tie to IOVDD for 32-bit, GND for 24-bit, or leave floating for 16-bit mode. |+| 32 | M2 | input | Hamming code enable; tie to IOVDD to enable validation, GND to disable, or leave floating as reserved. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFP-32(5x5) |+| Category | Data Acquisition |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `ADS131A02IPBS`+- Footprint: `Package_QFP:TQFP-32_5x5mm_P0.5mm`+- 3D model: TQFP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm nominal TQFP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ads131a02ipbs-etched.step` / `ads131a02ipbs-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads131a02ipbs.step` / `ads131a02ipbs.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads131a04) (92 pp, sha256 `a195fbfd42808a88`, retrieved 2026-10-06, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads131a02ipbs-datasheet.pdf)
page.jsonadded+301@@ -0,0 +1,301 @@+{+ "slug": "ads131a02ipbs",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads131a02ipbs",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads131a02ipbs.kicad_sym",+ "ads131a02ipbs.kicad_mod",+ "ads131a02ipbs.glb",+ "ads131a02ipbs.step",+ "ads131a02ipbs.lbr",+ "docs/hero.png",+ "docs/ads131a02ipbs-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads131a02ipbs-hero.glb",+ "ads131a02ipbs-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS131A02IPBS",+ "manufacturer": "Texas Instruments",+ "package": "TQFP-32(5x5)",+ "pin_count": 32,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads131a04",+ "parts": {+ "symbol": "ads131a02ipbs.kicad_sym",+ "footprint": "ads131a02ipbs.kicad_mod",+ "model_3d": "ads131a02ipbs-hero.glb",+ "model_3d_plain": "ads131a02ipbs.glb",+ "model_3d_step": "ads131a02ipbs-etched.step",+ "model_3d_step_plain": "ads131a02ipbs.step",+ "lbr": "ads131a02ipbs.lbr"+ },+ "distributor_links": {+ "lcsc": 1520680,+ "digikey": "296-44812-ND",+ "mouser": "595-ADS131A02IPBS"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T17:05:23Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-44812-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-ADS131A02IPBS",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "AIN1N",+ "type": "input",+ "description": "Negative differential analog input for channel 1."+ },+ {+ "number": "2",+ "name": "AIN1P",+ "type": "input",+ "description": "Positive differential analog input for channel 1."+ },+ {+ "number": "3",+ "name": "AIN2N",+ "type": "input",+ "description": "Negative differential analog input for channel 2."+ },+ {+ "number": "4",+ "name": "AIN2P",+ "type": "input",+ "description": "Positive differential analog input for channel 2."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave floating or connect directly to AVSS."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave floating or connect directly to AVSS."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave floating or connect directly to AVSS."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave floating or connect directly to AVSS."+ },+ {+ "number": "9",+ "name": "AVDD",+ "type": "power_in",+ "description": "Positive analog power supply requiring 1-µF bypass capacitor to AVSS."+ },+ {+ "number": "10",+ "name": "AVSS",+ "type": "power_in",+ "description": "Negative analog power supply."+ },+ {+ "number": "11",+ "name": "VNCP",+ "type": "output",+ "description": "Negative charge pump voltage output; connect 270-nF capacitor to AVSS when enabled or directly to AVSS when disabled."+ },+ {+ "number": "12",+ "name": "REFP",+ "type": "output",+ "description": "Positive reference voltage output requiring 1-µF bypass capacitor to REFN."+ },+ {+ "number": "13",+ "name": "REFN",+ "type": "input",+ "description": "Negative reference voltage input; connect to AVSS."+ },+ {+ "number": "14",+ "name": "REFEXT",+ "type": "input",+ "description": "Buffered external reference voltage input requiring 1-µF bypass capacitor to AVSS when using internal reference."+ },+ {+ "number": "15",+ "name": "IOVDD",+ "type": "power_in",+ "description": "Digital I/O supply voltage requiring 1-µF bypass capacitor to GND."+ },+ {+ "number": "16",+ "name": "RESV",+ "type": "input",+ "description": "Reserved pin; connect to IOVDD."+ },+ {+ "number": "17",+ "name": "RESET",+ "type": "input",+ "description": "Active-low system reset input."+ },+ {+ "number": "18",+ "name": "DONE",+ "type": "output",+ "description": "Active-low communication done signal output."+ },+ {+ "number": "19",+ "name": "DRDY",+ "type": "bidirectional",+ "description": "Active-low data ready output providing host interrupt and multi-device synchronization."+ },+ {+ "number": "20",+ "name": "DIN",+ "type": "input",+ "description": "Serial data input."+ },+ {+ "number": "21",+ "name": "DOUT",+ "type": "output",+ "description": "Serial data output requiring 100-kΩ pullup resistor to IOVDD."+ },+ {+ "number": "22",+ "name": "SCLK",+ "type": "bidirectional",+ "description": "Serial data clock."+ },+ {+ "number": "23",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select input."+ },+ {+ "number": "24",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "25",+ "name": "XTAL1/CLKIN",+ "type": "input",+ "description": "Master clock input or crystal oscillator buffer input."+ },+ {+ "number": "26",+ "name": "XTAL2",+ "type": "output",+ "description": "Crystal oscillator output; leave unconnected if oscillator is unused."+ },+ {+ "number": "27",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "28",+ "name": "CAP",+ "type": "output",+ "description": "Digital LDO regulator output requiring 1-µF bypass capacitor to GND."+ },+ {+ "number": "29",+ "name": "IOVDD",+ "type": "power_in",+ "description": "Digital I/O supply voltage requiring 1-µF bypass capacitor to GND."+ },+ {+ "number": "30",+ "name": "M0",+ "type": "input",+ "description": "SPI configuration mode; tie to IOVDD for asynchronous interrupt mode, GND for synchronous master mode, or leave floating for synchronous slave mode."+ },+ {+ "number": "31",+ "name": "M1",+ "type": "input",+ "description": "SPI word transfer size; tie to IOVDD for 32-bit, GND for 24-bit, or leave floating for 16-bit mode."+ },+ {+ "number": "32",+ "name": "M2",+ "type": "input",+ "description": "Hamming code enable; tie to IOVDD to enable validation, GND to disable, or leave floating as reserved."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 14,+ "cost_usd": 0.1823,+ "at": "2026-10-06T17:04:57"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads131a04",+ "pages": 92,+ "sha256": "a195fbfd42808a88",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 32,+ "described": 32,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}