← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# ADS1247IPWR++**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-20++ADS1247IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DVDD | power_in | Digital power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to DGND |+| 2 | DGND | power_in | Digital ground reference |+| 3 | CLK | input | External clock input 1 to 4.5 MHz, or tie to DGND to activate the internal oscillator |+| 4 | RESET | input | Reset input active low, pulse low for minimum 4 tCLK cycles to reset the device |+| 5 | REFP0/GPIO0 | bidirectional | Positive external reference input 0 or general-purpose digital input/output pin 0, reference voltage range 0.5 V to (AVDD - AVSS - 1 V) |+| 6 | REFN0/GPIO1 | bidirectional | Negative external reference input 0 or general-purpose digital input/output pin 1, reference voltage range (AVSS - 0.1 V) to (V(REFP) - 0.5 V) |+| 7 | VREFOUT | power_out | Positive internal reference voltage output ±2.048 V nominal, source/sink ±10 mA, connect 1 to 47 μF capacitor to VREFCOM |+| 8 | VREFCOM | power_out | Negative internal reference voltage output, connect to AVSS when using unipolar supply or to mid-voltage of power supply when using bipolar supply |+| 9 | AIN0/IEXC | input | Analog input 0 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V) |+| 10 | AIN1/IEXC | input | Analog input 1 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V) |+| 11 | AIN2/IEXC/GPIO2 | bidirectional | Analog input 2, optional excitation current source output, or general-purpose digital input/output pin 2, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V) |+| 12 | AIN3/IEXC/GPIO3 | bidirectional | Analog input 3, optional excitation current source output, or general-purpose digital input/output pin 3, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V) |+| 13 | AVSS | power_in | Negative analog power supply, -2.65 V to +0.1 V relative to DGND |+| 14 | AVDD | power_in | Positive analog power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to AVSS |+| 15 | START | input | Conversion start input active high, pulse high for minimum 3 tCLK cycles to initiate a conversion |+| 16 | CS | input | Chip select input active low for SPI communication, brings DOUT/DRDY to high-impedance state when high |+| 17 | DRDY | output | Data ready output active low, indicates a new conversion result is available in the conversion result buffer |+| 18 | DOUT/DRDY | tri_state | Serial data output or data output combined with data ready, MSB first, enters high-impedance state when CS is taken high |+| 19 | DIN | input | Serial data input MSB first, data shifted in on the falling edge of SCLK |+| 20 | SCLK | input | Serial clock input for SPI communication up to 4.5 MHz, SCLK idles low, data shifted out on rising edge |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | Data Acquisition |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `ADS1247IPWR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `ads1247ipwr-etched.step` / `ads1247ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads1247ipwr.step` / `ads1247ipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads1248) (104 pp, sha256 `08b29c91036dd059`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads1247ipwr-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "ads1247ipwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads1247ipwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads1247ipwr.kicad_sym",+ "ads1247ipwr.kicad_mod",+ "ads1247ipwr.glb",+ "ads1247ipwr.step",+ "ads1247ipwr.lbr",+ "docs/hero.png",+ "docs/ads1247ipwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "ADS1247IPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-20",+ "pin_count": 20,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads1248",+ "parts": {+ "symbol": "ads1247ipwr.kicad_sym",+ "footprint": "ads1247ipwr.kicad_mod",+ "model_3d": "ads1247ipwr-etched.glb",+ "model_3d_plain": "ads1247ipwr.glb",+ "model_3d_step": "ads1247ipwr-etched.step",+ "model_3d_step_plain": "ads1247ipwr.step",+ "lbr": "ads1247ipwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C26439"+ },+ "pins": [+ {+ "number": "1",+ "name": "DVDD",+ "type": "power_in",+ "description": "Digital power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to DGND"+ },+ {+ "number": "2",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital ground reference"+ },+ {+ "number": "3",+ "name": "CLK",+ "type": "input",+ "description": "External clock input 1 to 4.5 MHz, or tie to DGND to activate the internal oscillator"+ },+ {+ "number": "4",+ "name": "RESET",+ "type": "input",+ "description": "Reset input active low, pulse low for minimum 4 tCLK cycles to reset the device"+ },+ {+ "number": "5",+ "name": "REFP0/GPIO0",+ "type": "bidirectional",+ "description": "Positive external reference input 0 or general-purpose digital input/output pin 0, reference voltage range 0.5 V to (AVDD - AVSS - 1 V)"+ },+ {+ "number": "6",+ "name": "REFN0/GPIO1",+ "type": "bidirectional",+ "description": "Negative external reference input 0 or general-purpose digital input/output pin 1, reference voltage range (AVSS - 0.1 V) to (V(REFP) - 0.5 V)"+ },+ {+ "number": "7",+ "name": "VREFOUT",+ "type": "power_out",+ "description": "Positive internal reference voltage output ±2.048 V nominal, source/sink ±10 mA, connect 1 to 47 μF capacitor to VREFCOM"+ },+ {+ "number": "8",+ "name": "VREFCOM",+ "type": "power_out",+ "description": "Negative internal reference voltage output, connect to AVSS when using unipolar supply or to mid-voltage of power supply when using bipolar supply"+ },+ {+ "number": "9",+ "name": "AIN0/IEXC",+ "type": "input",+ "description": "Analog input 0 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"+ },+ {+ "number": "10",+ "name": "AIN1/IEXC",+ "type": "input",+ "description": "Analog input 1 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"+ },+ {+ "number": "11",+ "name": "AIN2/IEXC/GPIO2",+ "type": "bidirectional",+ "description": "Analog input 2, optional excitation current source output, or general-purpose digital input/output pin 2, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"+ },+ {+ "number": "12",+ "name": "AIN3/IEXC/GPIO3",+ "type": "bidirectional",+ "description": "Analog input 3, optional excitation current source output, or general-purpose digital input/output pin 3, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"+ },+ {+ "number": "13",+ "name": "AVSS",+ "type": "power_in",+ "description": "Negative analog power supply, -2.65 V to +0.1 V relative to DGND"+ },+ {+ "number": "14",+ "name": "AVDD",+ "type": "power_in",+ "description": "Positive analog power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to AVSS"+ },+ {+ "number": "15",+ "name": "START",+ "type": "input",+ "description": "Conversion start input active high, pulse high for minimum 3 tCLK cycles to initiate a conversion"+ },+ {+ "number": "16",+ "name": "CS",+ "type": "input",+ "description": "Chip select input active low for SPI communication, brings DOUT/DRDY to high-impedance state when high"+ },+ {+ "number": "17",+ "name": "DRDY",+ "type": "output",+ "description": "Data ready output active low, indicates a new conversion result is available in the conversion result buffer"+ },+ {+ "number": "18",+ "name": "DOUT/DRDY",+ "type": "tri_state",+ "description": "Serial data output or data output combined with data ready, MSB first, enters high-impedance state when CS is taken high"+ },+ {+ "number": "19",+ "name": "DIN",+ "type": "input",+ "description": "Serial data input MSB first, data shifted in on the falling edge of SCLK"+ },+ {+ "number": "20",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input for SPI communication up to 4.5 MHz, SCLK idles low, data shifted out on rising edge"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 104,+ "cost_usd": 1.0578,+ "at": "2026-09-23T10:52:24"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads1248",+ "pages": 104,+ "sha256": "08b29c91036dd059",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}