component
ADS1192IPBSR
Public Made by Adomby adom
Texas Instruments Analog Front End (AFE), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# ADS1192IPBSR++**Texas Instruments** · Analog Front End (AFE) · TQFP-32(5x5)++ADS1192IPBSR from Texas Instruments, in a TQFP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGA1N | output | Differential analog negative output 1. |+| 2 | PGA1P | output | Differential analog positive output 1. |+| 3 | IN1N | input | Differential analog negative input 1. |+| 4 | IN1P | input | Differential analog positive input 1. |+| 5 | IN2N | input | Differential analog negative input 2. |+| 6 | IN2P | input | Differential analog positive input 2. |+| 7 | PGA2N | output | Differential analog negative output 2. |+| 8 | PGA2P | output | Differential analog positive output 2. |+| 9 | VREFP | bidirectional | Positive reference voltage. |+| 10 | VREFN | input | Negative reference voltage. |+| 11 | VCAP1 | passive | Analog bypass capacitor. |+| 12 | AVDD | power_in | Analog supply. |+| 13 | AVSS | power_in | Analog ground. |+| 14 | CLKSEL | input | Master clock select. |+| 15 | PWDN/RESET | input | Power-down/System reset; active low. |+| 16 | START | input | Start conversion. |+| 17 | CLK | input | Master clock input. |+| 18 | CS | input | Chip select. |+| 19 | DIN | input | SPI data in. |+| 20 | SCLK | input | SPI clock. |+| 21 | DOUT | output | SPI data out. |+| 22 | DRDY | output | Data ready; active low. |+| 23 | DVDD | power_in | Digital power supply. |+| 24 | DGND | power_in | Digital ground. |+| 25 | GPIO2 | bidirectional | GPIO2. |+| 26 | GPIO1 | bidirectional | GPIO1. |+| 27 | VCAP2 | passive | Analog bypass capacitor. |+| 28 | RLDINV | input | Right leg drive inverting input. |+| 29 | RLDIN/RLDREF | input | Right leg drive input to MUX/RLD reference. |+| 30 | RLDOUT | output | Right leg drive output. |+| 31 | IN3P | bidirectional | Differential analog positive input 3. |+| 32 | IN3N | bidirectional | Differential analog negative input 3. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFP-32(5x5) |+| Category | Data Acquisition |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `ADS1192IPBSR`+- Footprint: `Package_QFP:TQFP-32_5x5mm_P0.5mm`+- 3D model: TQFP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm nominal TQFP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ads1192ipbsr-etched.step` / `ads1192ipbsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads1192ipbsr.step` / `ads1192ipbsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads1192) (70 pp, sha256 `7849445069dc8f6f`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads1192ipbsr-datasheet.pdf)
page.jsonadded+344@@ -0,0 +1,344 @@+{+ "slug": "ads1192ipbsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Front End (AFE), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ads1192ipbsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads1192ipbsr.kicad_sym",+ "ads1192ipbsr.kicad_mod",+ "ads1192ipbsr.glb",+ "ads1192ipbsr.step",+ "ads1192ipbsr.lbr",+ "docs/hero.png",+ "docs/ads1192ipbsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads1192ipbsr-hero.glb",+ "ads1192ipbsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS1192IPBSR",+ "manufacturer": "Texas Instruments",+ "package": "TQFP-32(5x5)",+ "pin_count": 32,+ "category": "Data Acquisition",+ "subcategory": "Analog Front End (AFE)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads1192",+ "parts": {+ "symbol": "ads1192ipbsr.kicad_sym",+ "footprint": "ads1192ipbsr.kicad_mod",+ "model_3d": "ads1192ipbsr-hero.glb",+ "model_3d_plain": "ads1192ipbsr.glb",+ "model_3d_step": "ads1192ipbsr-etched.step",+ "model_3d_step_plain": "ads1192ipbsr.step",+ "lbr": "ads1192ipbsr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2651613",+ "digikey": "ADS1192IPBSR-ND",+ "mouser": "595-ADS1192IPBSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T02:09:00Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "ADS1192IPBSR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-ADS1192IPBSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PGA1N",+ "type": "output",+ "description": "Differential analog negative output 1."+ },+ {+ "number": "2",+ "name": "PGA1P",+ "type": "output",+ "description": "Differential analog positive output 1."+ },+ {+ "number": "3",+ "name": "IN1N",+ "type": "input",+ "description": "Differential analog negative input 1."+ },+ {+ "number": "4",+ "name": "IN1P",+ "type": "input",+ "description": "Differential analog positive input 1."+ },+ {+ "number": "5",+ "name": "IN2N",+ "type": "input",+ "description": "Differential analog negative input 2."+ },+ {+ "number": "6",+ "name": "IN2P",+ "type": "input",+ "description": "Differential analog positive input 2."+ },+ {+ "number": "7",+ "name": "PGA2N",+ "type": "output",+ "description": "Differential analog negative output 2."+ },+ {+ "number": "8",+ "name": "PGA2P",+ "type": "output",+ "description": "Differential analog positive output 2."+ },+ {+ "number": "9",+ "name": "VREFP",+ "type": "bidirectional",+ "description": "Positive reference voltage."+ },+ {+ "number": "10",+ "name": "VREFN",+ "type": "input",+ "description": "Negative reference voltage."+ },+ {+ "number": "11",+ "name": "VCAP1",+ "type": "passive",+ "description": "Analog bypass capacitor."+ },+ {+ "number": "12",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog supply."+ },+ {+ "number": "13",+ "name": "AVSS",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "14",+ "name": "CLKSEL",+ "type": "input",+ "description": "Master clock select."+ },+ {+ "number": "15",+ "name": "PWDN/RESET",+ "type": "input",+ "description": "Power-down/System reset; active low."+ },+ {+ "number": "16",+ "name": "START",+ "type": "input",+ "description": "Start conversion."+ },+ {+ "number": "17",+ "name": "CLK",+ "type": "input",+ "description": "Master clock input."+ },+ {+ "number": "18",+ "name": "CS",+ "type": "input",+ "description": "Chip select."+ },+ {+ "number": "19",+ "name": "DIN",+ "type": "input",+ "description": "SPI data in."+ },+ {+ "number": "20",+ "name": "SCLK",+ "type": "input",+ "description": "SPI clock."+ },+ {+ "number": "21",+ "name": "DOUT",+ "type": "output",+ "description": "SPI data out."+ },+ {+ "number": "22",+ "name": "DRDY",+ "type": "output",+ "description": "Data ready; active low."+ },+ {+ "number": "23",+ "name": "DVDD",+ "type": "power_in",+ "description": "Digital power supply."+ },+ {+ "number": "24",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "25",+ "name": "GPIO2",+ "type": "bidirectional",+ "description": "GPIO2."+ },+ {+ "number": "26",+ "name": "GPIO1",+ "type": "bidirectional",+ "description": "GPIO1."+ },+ {+ "number": "27",+ "name": "VCAP2",+ "type": "passive",+ "description": "Analog bypass capacitor."+ },+ {+ "number": "28",+ "name": "RLDINV",+ "type": "input",+ "description": "Right leg drive inverting input."+ },+ {+ "number": "29",+ "name": "RLDIN/RLDREF",+ "type": "input",+ "description": "Right leg drive input to MUX/RLD reference."+ },+ {+ "number": "30",+ "name": "RLDOUT",+ "type": "output",+ "description": "Right leg drive output."+ },+ {+ "number": "31",+ "name": "IN3P",+ "type": "bidirectional",+ "description": "Differential analog positive input 3."+ },+ {+ "number": "32",+ "name": "IN3N",+ "type": "bidirectional",+ "description": "Differential analog negative input 3."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 30 (RLDOUT): The PIN ASSIGNMENTS table lists FUNCTION as 'Analog input' but DESCRIPTION states '; Pins 9, 31, 32 (VREFP, IN3P, IN3N): Listed as 'Analog input/output' in FUNCTION column, classified a"+ ],+ "pages_sent": 11,+ "cost_usd": 0.1241,+ "at": "2026-10-07T02:08:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads1192",+ "pages": 70,+ "sha256": "7849445069dc8f6f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 32,+ "described": 32,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads1192ipbsr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.96,+ 6.96,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "af572b9fc856f60be6ce6064617dea6816eadafa0287977f6f1c73365bed3c19",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads1192ipbsr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.96,+ 6.96,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f1407dbd07592b24a7f015b839409cf3462d5caabbfd6ec1aa769a4bd45fc4c2",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}