project
Adom Custom Electronic Load
Public Made by Adomby adom
Two-layer digitally controlled electronic-load prototype. Compact R11 is under active electrical, cooling and probe-access review; not a manufacturing release.
← Commit history
aiflow run board-codex-20261007-1749: libraries
18 files changed
+465−18
docs/runs/board-codex-20261007-1749/README.md+78−18docs/runs/board-codex-20261007-1749/components-2-analysis-image-6.pngdocs/runs/board-codex-20261007-1749/components-2-analysis-image-7.pngdocs/runs/board-codex-20261007-1749/components-2-engineering-review-0.json+20docs/runs/board-codex-20261007-1749/components-2-engineering-review-1.json+214docs/runs/board-codex-20261007-1749/components-2-engineering-review-2.json+88docs/runs/board-codex-20261007-1749/components-2-engineering-review-3.json+65docs/runs/board-codex-20261007-1749/components-2-process-clip-8.mp4docs/runs/board-codex-20261007-1749/components-2-process-clip-9.mp4docs/runs/board-codex-20261007-1749/components-2-process-video-13.mp4docs/runs/board-codex-20261007-1749/components-2-process-video-14.mp4docs/runs/board-codex-20261007-1749/components-2-process-video-4.mp4docs/runs/board-codex-20261007-1749/components-2-sheet.pngdocs/runs/board-codex-20261007-1749/components-2-video-10.mp4docs/runs/board-codex-20261007-1749/components-2-video-11.mp4docs/runs/board-codex-20261007-1749/components-2-video-12.mp4docs/runs/board-codex-20261007-1749/components-2-video-5.mp4docs/runs/board-codex-20261007-1749/components-2.mp4docs/runs/board-codex-20261007-1749/README.md+78−18@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `components`, 1038.3 min of AI time since the prompt (5568.2 min on the wall clock). This page updates at every step change.+**Running**: step `libraries`, 1523.5 min of AI time since the prompt (6158.9 min on the wall clock). This page updates at every step change. Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -22,8 +22,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 10 | 2026-10-09T18:12:40Z | (open) | 10.1 | 99 | Resume electronic-load completion: inspect native board, land reviewed diode thermal vias | | 11 | 2026-10-09T20:02:16Z | (open) | 220.9 | 861 | Continue board 18 to completion; resolve package-mounted cooling and thermal solver suppor | | 12 | 2026-10-10T14:04:14Z | (open) | 202.2 | 312 | Continue electronic-load engineering and recorded workflow; magnetic-field question withdr |-| 13 | 2026-10-10T22:38:10Z | (open) | 109.3 | 850 | Continue to the finish line; resolve supported cooling design and remaining deliverables, |-| **all** | | | **1038.3** | | |+| 13 | 2026-10-10T22:38:10Z | (open) | 594.5 | 956 | Continue to the finish line; resolve supported cooling design and remaining deliverables, |+| **all** | | | **1523.5** | | | ## Per step @@ -37,15 +37,15 @@ AI time only, the idle cut out. | pours | 4.7 | 0.0 | 4.7 | 16 | 1 | 0 | 0.0 min | | current | 77.8 | 0.0 | 77.8 | 120 | 1 | 0 | 0.0 min | | thermal | 54.8 | 0.0 | 54.8 | 258 | 1 | 0 | 0.0 min |-| components | 11.9 | 0.0 | 11.9 | 29 | 2 | 1 | 0.0 min |+| components | 66.3 | 0.0 | 66.3 | 386 | 2 | 1 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min |-| libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min |+| libraries | 1.4 | 0.0 | 1.4 | 7 | 2 | 0 | 0.0 min | | models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min | | outline | 0.1 | 0.0 | 0.1 | 2 | 1 | 0 | 0.0 min |-| rules | 786.8 | 0.0 | 786.8 | 14 | 1 | 0 | 0.0 min |+| rules | 1217.5 | 0.0 | 1217.5 | 14 | 1 | 0 | 0.0 min | | test-plan | 0.1 | 0.0 | 0.1 | 5 | 1 | 0 | 0.0 min | | thermal-vias | 26.9 | 0.0 | 26.9 | 177 | 4 | 0 | 0.0 min |-| **total** | **1038.3** | **0.3** | **1038.0** | | | | |+| **total** | **1523.5** | **0.3** | **1523.1** | | | | | ## Returns to earlier steps @@ -145,16 +145,26 @@ AI time only, the idle cut out. - 2026-10-10T22:58:54Z artifact analysis-image for thermal-1: Board22 exact-file current screen at assumed 35um surface/25um barrel. All six nets below60 A/mm2. Finished copper and thermal qualification remain open. - 2026-10-10T23:59:36Z artifact analysis-image for thermal-1: Board24 current density: assumed 35/25 µm copper, display capped; exact peak 58.18 A/mm². Thermal qualification open. - 2026-10-10T23:59:47Z artifact analysis-image for thermal-1: Board24 current density from 16-bit solver textures: assumed 35/25 µm copper; capped display, exact peak 58.18 A/mm². Thermal qualification open.+- 2026-10-11T14:37:38Z capture-stop+- 2026-10-11T17:01:50Z artifact engineering-review for components-2: D1 metadata-only candidate: structural and native DRC checks pass; not adopted+- 2026-10-11T17:03:02Z artifact engineering-review for components-2: Seven IC pin-function reviews against manufacturer documentation; qualification remains open+- 2026-10-11T17:07:53Z artifact engineering-review for components-2: J11 manufacturer hole and project annulus candidate passes native DRC; not yet adopted+- 2026-10-11T17:10:30Z artifact engineering-review for components-2: Q1 larger-hole candidate passes unchanged native DRC rules; formed leads and assembly remain unqualified+- 2026-10-11T17:15:48Z artifact process-video for components-2: Reviewed 2x native candidate orbit; six catalog models and corrected hole variants, qualification open+- 2026-10-11T17:57:05Z artifact video for components-2: Native KiCad inspection of ten marked IC models; 2x excerpt, board26, physical qualification pending+- 2026-10-11T18:16:32Z artifact analysis-image for components-2: Q1 formed-lead study: original nominal CAD, not adopted; mounting and cooling qualification open+- 2026-10-11T18:42:02Z artifact analysis-image for components-2: R7 fault-power candidate: 4.7k Panasonic 0.1W versus existing1k 0.0625W; partial simulation, not hardware qualification.+- 2026-10-11T19:08:37Z artifact process-clip for components-2: Board28 native review after low-voltage Q3/Q4 replacement; 2x actual capture, hardware qualification pending.+- 2026-10-11T19:29:39Z artifact process-clip for components-2: Native Q1 formed-lead detail, 2x actual recording. Nominal geometry only; mounting and thermal qualification remain open.+- 2026-10-11T19:50:16Z artifact video for components-2: Native scaffold-fit candidate: 64x72mm corner span; DRC and nominal XY fit pass, assembly qualification remains open.2x playback.+- 2026-10-11T20:17:57Z artifact video for components-2: JST GH sensor connector candidate: native board overview, 2x playback+- 2026-10-11T20:21:55Z artifact video for components-2: JST GH header: native terminal close-up, 2x playback+- 2026-10-11T23:18:09Z artifact process-video for components-2: Native Board31 land-pattern review, top orbit at2x; prototype, human clip review pending+- 2026-10-12T00:07:22Z artifact process-video for components-2: Native U3/U7 manufacturer-land candidate review, selected excerpt at2x; not physical qualification, recorder timing warning retained+- 2026-10-12T00:09:39Z artifact process-video for components-2: Native U3/U7 candidate overview, corrected exact source1.5–4.5s at2x, duration1.5s; cropped later orbit omitted; capture timing unqualified ## Where the board stands -- routing: 0 unrouted after null passes-- gate: 0 new DRC errors, 0 unconnected, null inherited-- landed live: 0 of 0 route entries-- pours (verified-existing): 9 groups, failed []-- copper kept (mm2 per layer): {"B.Cu":2952.03,"F.Cu":2737.55}-- analyze-current: pass-- analyze-thermal: fail ## The steps on camera @@ -542,7 +552,57 @@ What this step does: Audit wiki component identity, reusable CAD quality and red Why the AI came back here: Component audit is incomplete: 94 pending and 10 stale reference reviews; zero wikiPage links in the register. Reconcile existing reusable pages and create missing qualified part pages before claiming this stage complete. Preserve current PCB and historical analysis evidence. -**Clip: components, visit 2 (rework), still recording (started 2026-10-11T14:37:27Z); it appears here when the step ends.**+**This clip filmed nothing usable: 8 of 8 sampled frames are one flat colour in the middle of the window (an unpainted or covered canvas). It is kept as evidence and left out of the video.**++**Clip: components, visit 2 (rework), the PCB editor from 2026-10-11T14:37:27Z to 2026-10-11T14:37:38Z. Motion only: 0.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the components, visit 2 (rework) clip, what the camera saw.**++++**The AI's file: D1 metadata-only candidate: structural and native DRC checks pass; not adopted** [components-2-engineering-review-0.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-engineering-review-0.json)++**The AI's file: Seven IC pin-function reviews against manufacturer documentation; qualification remains open** [components-2-engineering-review-1.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-engineering-review-1.json)++**The AI's file: J11 manufacturer hole and project annulus candidate passes native DRC; not yet adopted** [components-2-engineering-review-2.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-engineering-review-2.json)++**The AI's file: Q1 larger-hole candidate passes unchanged native DRC rules; formed leads and assembly remain unqualified** [components-2-engineering-review-3.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-engineering-review-3.json)++**The AI's file: Reviewed 2x native candidate orbit; six catalog models and corrected hole variants, qualification open** [components-2-process-video-4.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-process-video-4.mp4)++**The AI's file: Native KiCad inspection of ten marked IC models; 2x excerpt, board26, physical qualification pending** [components-2-video-5.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-video-5.mp4)++**The AI's drawing: Q1 formed-lead study: original nominal CAD, not adopted; mounting and cooling qualification open**++++**The AI's drawing: R7 fault-power candidate: 4.7k Panasonic 0.1W versus existing1k 0.0625W; partial simulation, not hardware qualification.**++++**The AI's file: Board28 native review after low-voltage Q3/Q4 replacement; 2x actual capture, hardware qualification pending.** [components-2-process-clip-8.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-process-clip-8.mp4)++**The AI's file: Native Q1 formed-lead detail, 2x actual recording. Nominal geometry only; mounting and thermal qualification remain open.** [components-2-process-clip-9.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-process-clip-9.mp4)++**The AI's file: Native scaffold-fit candidate: 64x72mm corner span; DRC and nominal XY fit pass, assembly qualification remains open.2x playback.** [components-2-video-10.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-video-10.mp4)++**The AI's file: JST GH sensor connector candidate: native board overview, 2x playback** [components-2-video-11.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-video-11.mp4)++**The AI's file: JST GH header: native terminal close-up, 2x playback** [components-2-video-12.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-video-12.mp4)++**The AI's file: Native Board31 land-pattern review, top orbit at2x; prototype, human clip review pending** [components-2-process-video-13.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-process-video-13.mp4)++**The AI's file: Native U3/U7 candidate overview, corrected exact source1.5–4.5s at2x, duration1.5s; cropped later orbit omitted; capture timing unqualified** [components-2-process-video-14.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/components-2-process-video-14.mp4)++### libraries, visit 2++What this step does: Assemble and validate the reviewed symbols, footprints and selected model variants in the chosen EDA before placement.++Why the AI came back here: Continue exact-part library acceptance and canonical component hero repairs for adopted Board32++**Clip: libraries, visit 2, still recording (started 2026-10-12T00:28:08Z); it appears here when the step ends.** ## Plan usage, the second cost line @@ -550,10 +610,10 @@ Percent of each plan limit used, as the provider reports it, at the start of the | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 10 % | -7.0 % |+| claude | 5h | 17 % | 6 % | -11.0 % | | claude | Fable | 0 % | 0 % | 0.0 % |-| claude | week | 54 % | 6 % | -48.0 % |-| codex | week | 2 % | 1 % | -1.0 % |+| claude | week | 54 % | 13 % | -41.0 % |+| codex | week | 2 % | 30 % | 28.0 % | *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*
docs/runs/board-codex-20261007-1749/components-2-analysis-image-6.pngadded⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-analysis-image-7.pngadded⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-engineering-review-0.jsonadded+20@@ -0,0 +1,20 @@+{+ "source": "aiflow/run/board-24.kicad_pcb",+ "sourceSha256": "8827e2f804ff0e02766d40287416d814f66fbfa2780483ebdccd983adcb1ed26",+ "candidate": "checkpoints/library-metadata-review/d1-mpn-candidate.kicad_pcb",+ "candidateSha256": "786c993a8f5ee71d0b15e3bf522b90876616ec3b5348fec8404a1dda1c8406f0",+ "finding": "D1 dedicated MPN property missing; Value and footprint already exact SBR10U45SP5-13",+ "change": "Add hidden MPN property only",+ "bytePreservationOutsideInsertion": true,+ "parsedBoardUnchangedExceptProperty": true,+ "nativeApplied": false,+ "nativeValidation": {+ "report": "checkpoints/library-metadata-review/native-drc-with-libraries.json",+ "sha256": "4f143628b07b06b59ac5f2ddc12e3e7c7d5b01eca9a4ea248b2fcb2f068ce107",+ "violations": 0,+ "opens": 0,+ "projectLibrariesIncluded": true,+ "rulesUnchanged": true+ },+ "qualification": "No electrical, thermal, geometry or manufacturing qualification implied"+}
docs/runs/board-codex-20261007-1749/components-2-engineering-review-1.jsonadded+214@@ -0,0 +1,214 @@+{+ "boardSha256": "8827e2f804ff0e02766d40287416d814f66fbfa2780483ebdccd983adcb1ed26",+ "reviews": [+ {+ "reference": "U2",+ "mpn": "DAC60501ZDGSR",+ "wikiPage": "https://wiki.adom.inc/adom/dac60501zdgsr",+ "datasheet": "datasheets/dacx0501.pdf",+ "datasheetSha256": "51dcb60423765d2521c62af621e2d6c7f4d38c9aa48deec4b4044d49decbbc20",+ "page": 3,+ "symbolSha256": "3d2c099f85c101d2eb649e2e663665f1ab44aac5b5b74c9577184c82457e6cdc",+ "manufacturerPinMap": {+ "1": "VDD",+ "2": "VOUT",+ "3": "NC",+ "4": "AGND",+ "5": "SPI2C",+ "6": "SCLK/SCL",+ "7": "SYNC/A0",+ "8": "SDIN/SDA",+ "9": "NC",+ "10": "VREFIO"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "3V3",+ "2": "DAC_OUT",+ "3": null,+ "4": "SHUNT_N_SENSE",+ "5": "3V3",+ "6": "I2C_SCL",+ "7": "GND",+ "8": "I2C_SDA",+ "9": null,+ "10": "VREF_2V5"+ },+ "reviewNote": "DGS VSSOP selected, not DQF WSON. SPI2C tied high selects I2C; pins3/9 unconnected.",+ "scope": "Pin functions and intended net assignments only. Geometry, model orientation, analogue performance and fault timing not qualified."+ },+ {+ "reference": "U4",+ "mpn": "INA226AIDGST",+ "wikiPage": "https://wiki.adom.inc/adom/ina226aidgst",+ "datasheet": "datasheets/ina226.pdf",+ "datasheetSha256": "c9b67f886d4a5241a5e070723f7b61867409eeb27eed768b9cdd9cb17e03ca2d",+ "page": 3,+ "symbolSha256": "74a6641a01c16fad8b35acbad3750506a2ab6fa45781fb84dc4a1b7c8895e624",+ "manufacturerPinMap": {+ "1": "A1",+ "2": "A0",+ "3": "Alert",+ "4": "SDA",+ "5": "SCL",+ "6": "VS",+ "7": "GND",+ "8": "VBUS",+ "9": "IN\u2013",+ "10": "IN+"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "GND",+ "2": "GND",+ "3": "ALERT",+ "4": "I2C_SDA",+ "5": "I2C_SCL",+ "6": "3V3",+ "7": "SHUNT_N_SENSE",+ "8": "LOAD_POS",+ "9": "SHUNT_N_SENSE",+ "10": "SHUNT_P_SENSE"+ },+ "reviewNote": "IN+ shunt positive sense, IN- negative sense; VBUS LOAD_POS. GND returns to shunt negative sense.",+ "scope": "Pin functions and intended net assignments only. Geometry, model orientation, analogue performance and fault timing not qualified."+ },+ {+ "reference": "U5",+ "mpn": "TPS61040DBVR",+ "wikiPage": "https://wiki.adom.inc/adom/tps61040dbvr",+ "datasheet": "datasheets/tps61040.pdf",+ "datasheetSha256": "6cdca27bfce2aa901281361729cfebaac6b4ecf85f5fc1fac41b81bb7e673d18",+ "page": 3,+ "symbolSha256": "6f84e0f8e98852721ce599223dd75ae83593047b8f5331d52541254f8dbf5f59",+ "manufacturerPinMap": {+ "1": "SW",+ "2": "GND",+ "3": "FB",+ "4": "EN",+ "5": "VIN"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "BOOST_SW",+ "2": "GND",+ "3": "BOOST_FB",+ "4": "5V_AUX",+ "5": "5V_AUX"+ },+ "reviewNote": "DBV five-pin pinout selected, not six-pin DRV. EN tied to auxiliary supply.",+ "scope": "Pin functions and intended net assignments only. Geometry, model orientation, analogue performance and fault timing not qualified."+ },+ {+ "reference": "U8",+ "mpn": "SN74LVC1G175DBVR",+ "wikiPage": "https://wiki.adom.inc/adom/sn74lvc1g175dbvr",+ "datasheet": "datasheets/latch.pdf",+ "datasheetSha256": "6f19e0a69062e117c53102666ad904537010044b2bd980c6515483db8c83b887",+ "page": 3,+ "symbolSha256": "7f116f4e2f8c683bc4645e0636a7bc9fba505c58c8c9aaf78c6b27582f6a5ca8",+ "manufacturerPinMap": {+ "1": "CLK",+ "2": "GND",+ "3": "D",+ "4": "Q",+ "5": "VCC",+ "6": "CLR"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "ARM_CLK",+ "2": "GND",+ "3": "3V3",+ "4": "LATCH_Q",+ "5": "3V3",+ "6": "HW_OK"+ },+ "reviewNote": "Pin6 is active-low asynchronous clear; HW_OK must hold high to permit arming. Pin3 high; positive clock edge latches enable. Catalog label CLR does not itself encode active-low semantics.",+ "scope": "Pin functions and intended net assignments only. Geometry, model orientation, analogue performance and fault timing not qualified."+ },+ {+ "reference": "U6",+ "mpn": "STWD100NYWY3F",+ "wikiPage": "https://wiki.adom.inc/adom/stwd100nywy3f",+ "datasheetUrl": "https://www.st.com/resource/en/datasheet/stwd100.pdf",+ "page": 3,+ "symbolSha256": "3afe1717c7384748c87e58c5d49d1f4aa96e601ea3813705629d32d56ca9c805",+ "manufacturerPinMap": {+ "1": "WDO",+ "2": "GND",+ "3": "EN",+ "4": "WDI",+ "5": "VCC"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "HW_OK",+ "2": "GND",+ "3": "GND",+ "4": "WDI",+ "5": "3V3"+ },+ "reviewNote": "Enable is active low, tied to GND. Watchdog output asserts low. Exact N output configuration and Y timing need ordering-table evidence before fault-response qualification.",+ "scope": "Pin functions only; not complete component qualification",+ "sourceAccess": "Official PDF content inspected through web tool; direct ST PDF downloads timed out"+ },+ {+ "reference": "U10",+ "mpn": "USBLC6-2SC6",+ "wikiPage": "https://wiki.adom.inc/ray/usblc6-2sc6",+ "datasheetUrl": "https://www.st.com/resource/en/datasheet/usblc6-2.pdf",+ "page": 1,+ "symbolSha256": "ca3e27afea97b9ad2f65e3ed6e713a5ee46f23c692fd7aaf69bf84e46785e510",+ "manufacturerPinMap": {+ "1": "I/O1",+ "2": "GND",+ "3": "I/O2",+ "4": "I/O2",+ "5": "VBUS",+ "6": "I/O1"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "USB_DP_CONN",+ "2": "GND",+ "3": "USB_DM_CONN",+ "4": "USB_DM_CONN",+ "5": "USB_VBUS",+ "6": "USB_DP_CONN"+ },+ "reviewNote": "Top-view functional diagram agrees: pins1/6 same D+ net, pins3/4 same D- net, pin5 USB_VBUS. Layout-dependent ESD immunity unqualified.",+ "scope": "Pin functions only; not complete component qualification",+ "sourceAccess": "Official PDF content inspected through web tool; direct ST PDF downloads timed out"+ },+ {+ "reference": "U9",+ "mpn": "TLV75533PDBVR",+ "wikiPage": "https://wiki.adom.inc/adom/tlv75533pdbvr",+ "datasheetUrl": "https://www.ti.com/lit/ds/symlink/tlv755p.pdf",+ "page": 3,+ "symbolSha256": "3550a0b266008647ed0520a95fe4a3f0e01ac237125af4f355b3fe3f97882abd",+ "manufacturerPinMap": {+ "1": "IN",+ "2": "GND",+ "3": "EN",+ "4": "NC",+ "5": "OUT"+ },+ "catalogPinMapMatches": true,+ "boardIntentPins": {+ "1": "5V_AUX",+ "2": "GND",+ "3": "5V_AUX",+ "4": null,+ "5": "3V3"+ },+ "reviewNote": "DBV variant, no exposed pad. EN tied to5V_AUX, output3V3, NC unconnected. Effective input/output capacitance requires separate bias/temperature review.",+ "scope": "Pin functions only; not complete component qualification",+ "sourceAccess": "Local official PDF pin table inspected",+ "datasheet": "datasheets/tlv755p.pdf",+ "datasheetSha256": "d5d9f30657f27c620b7ef579ade01bbf930344b4e9f963c961b6a60bf02f410b"+ }+ ],+ "remaining": "Other active parts and connector mappings still require consolidated review; no gate advanced."+}
docs/runs/board-codex-20261007-1749/components-2-engineering-review-2.jsonadded+88@@ -0,0 +1,88 @@+{+ "projectFootprintVariant": "Load:FTS_105_01_L_S_3rdPartyFab",+ "source": "checkpoints/library-model-review/library-model-candidate.kicad_pcb",+ "sourceSha256": "8387964a53c2bb9a56766eb9b3406772340ac23baeba0bce237d00e7edbfee66",+ "candidate": "checkpoints/j11-hole-review/j11-hole-candidate.kicad_pcb",+ "candidateSha256": "31d9edda1de7f612956b5fd4d43d11a17c375156ca2f3ee10e77710dc084b0f0",+ "changes": [+ {+ "pin": "1",+ "oldSize": [+ 1,+ 1+ ],+ "oldDrill": 0.65,+ "newSize": [+ 1.05,+ 1.05+ ],+ "newDrill": 0.71+ },+ {+ "pin": "2",+ "oldSize": [+ 1,+ 1+ ],+ "oldDrill": 0.65,+ "newSize": [+ 1.05,+ 1.05+ ],+ "newDrill": 0.71+ },+ {+ "pin": "3",+ "oldSize": [+ 1,+ 1+ ],+ "oldDrill": 0.65,+ "newSize": [+ 1.05,+ 1.05+ ],+ "newDrill": 0.71+ },+ {+ "pin": "4",+ "oldSize": [+ 1,+ 1+ ],+ "oldDrill": 0.65,+ "newSize": [+ 1.05,+ 1.05+ ],+ "newDrill": 0.71+ },+ {+ "pin": "5",+ "oldSize": [+ 1,+ 1+ ],+ "oldDrill": 0.65,+ "newSize": [+ 1.05,+ 1.05+ ],+ "newDrill": 0.71+ }+ ],+ "nominalAnnulusMm": 0.17,+ "nominalInterpadGapMm": 0.22,+ "ruleAnnulusMinMm": 0.15,+ "ruleClearanceMinMm": 0.2,+ "manufacturerDrawing": "https://suddendocs.samtec.com/prints/fts-1xx-xx-x-sx-footprint.pdf",+ "tracksViasNetsZonesUnchanged": true,+ "nativeApplied": false,+ "nativeDrc": {+ "report": "checkpoints/j11-hole-review/native-drc.json",+ "violations": 0,+ "opens": 0,+ "allWarningsRetained": true+ },+ "qualification": "Finished-hole tolerance and fabrication capability remain unqualified"+}
docs/runs/board-codex-20261007-1749/components-2-engineering-review-3.jsonadded+65@@ -0,0 +1,65 @@+{+ "source": "checkpoints/j11-hole-review/j11-hole-candidate.kicad_pcb",+ "sourceSha256": "31d9edda1de7f612956b5fd4d43d11a17c375156ca2f3ee10e77710dc084b0f0",+ "candidate": "checkpoints/q1-hole-review/q1-hole-candidate.kicad_pcb",+ "candidateSha256": "c4b9a14376eab9d29391aa48726e2e5009c3dfc6926951bcc21751347db3bb63",+ "changes": [+ {+ "pin": "1",+ "oldSize": [+ "1.905",+ "2"+ ],+ "oldDrill": "1.1"+ },+ {+ "pin": "2",+ "oldSize": [+ "1.6",+ "2"+ ],+ "oldDrill": "1.1"+ },+ {+ "pin": "3",+ "oldSize": [+ "1.905",+ "2"+ ],+ "oldDrill": "1.1"+ }+ ],+ "newPadSizeMm": {+ "1": [+ 1.905,+ 2+ ],+ "2": [+ 1.75,+ 2+ ],+ "3": [+ 1.905,+ 2+ ]+ },+ "newDrillMm": 1.4,+ "maxLeadSectionMm": [+ 1.02,+ 0.56+ ],+ "maxLeadDiagonalMm": 1.1636150566231085,+ "nominalDiametralClearanceMm": 0.23638494337689142,+ "minimumNominalAnnulusMm": 0.175,+ "minimumNominalInterpadGapMm": 0.7125,+ "tracksViasZonesNetsUnchanged": true,+ "nativeApplied": false,+ "qualification": "Review only. Native DRC, finished-hole tolerance, lead forming, model, thermal assembly and current rerun unresolved.",+ "nativeDrc": {+ "report": "checkpoints/q1-hole-review/native-drc.json",+ "sha256": "b6eeda2b8c87e38662150dd20d964da3018b30905fab46354ae05b1134e934d5",+ "violations": 0,+ "opens": 0,+ "rulesUnchanged": true+ }+}
docs/runs/board-codex-20261007-1749/components-2-process-clip-8.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-process-clip-9.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-process-video-13.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-process-video-14.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-process-video-4.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-sheet.pngadded⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-video-10.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-video-11.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-video-12.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2-video-5.mp4added⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/components-2.mp4added⋯ 1 unchanged line ⋯