Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1815.9 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1864.6 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 124.3 | 938 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1815.9** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 173.1 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1864.6** | | |  ## Per step @@ -43,7 +43,7 @@ AI time only, the idle cut out. | intake | 2.6 | 0.3 | 2.2 | 3 | 1 | 0 | 0.3 min | | placement | 9.5 | 0.0 | 9.5 | 31 | 5 | 3 | 0.0 min | | routing | 63.4 | 0.0 | 63.4 | 92 | 7 | 2 | 0.0 min |-| pours | 5.0 | 0.0 | 5.0 | 18 | 2 | 0 | 0.0 min |+| pours | 5.0 | 0.0 | 5.0 | 19 | 3 | 0 | 0.0 min | | current | 78.1 | 0.0 | 78.1 | 123 | 2 | 0 | 0.0 min | | thermal | 89.0 | 0.0 | 89.0 | 350 | 2 | 0 | 0.0 min | | finish | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min |@@ -56,11 +56,11 @@ AI time only, the idle cut out. | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min | | nets | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min | | outline | 0.4 | 0.0 | 0.4 | 4 | 2 | 0 | 0.0 min |-| rules | 1440.8 | 0.0 | 1440.8 | 14 | 1 | 0 | 0.0 min |+| rules | 1487.6 | 0.0 | 1487.6 | 14 | 1 | 0 | 0.0 min | | silkscreen | 0.7 | 0.0 | 0.7 | 3 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min |-| thermal-vias | 27.3 | 0.0 | 27.3 | 181 | 6 | 0 | 0.0 min |-| **total** | **1815.8** | **0.3** | **1815.5** | | | | |+| thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |+| **total** | **1864.6** | **0.3** | **1864.3** | | | | |  ## Returns to earlier steps @@ -217,6 +217,8 @@ AI time only, the idle cut out. - 2026-10-13T02:51:45Z clip-start:routing-7 - 2026-10-13T02:53:40Z capture-stop - 2026-10-13T04:16:21Z clip-start:thermal-vias-6+- 2026-10-13T04:16:35Z capture-stop+- 2026-10-13T05:22:06Z clip-start:pours-3  ## Where the board stands @@ -224,6 +226,8 @@ AI time only, the idle cut out. - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries - pours (verified-existing): 9 groups, failed []+- copper kept (mm2 per layer): {"B.Cu":5808.49,"F.Cu":5530.47}+- analyze-current: pass  ## The steps on camera @@ -973,22 +977,40 @@ Why the AI came back here: User requested side-fan assembly and completion: appl  What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it. -**Clip: thermal-vias, visit 6, still recording (started 2026-10-13T04:16:21Z); it appears here when the step ends.**+**Clip: thermal-vias, visit 6, the PCB editor from 2026-10-13T04:16:21Z to 2026-10-13T04:16:35Z. Motion only: 0.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-vias-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal-vias, visit 6 clip, what the camera saw.**++![nine frames of thermal-vias, visit 6](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-vias-6-sheet.png)  **Screenshot: the board when thermal-vias, visit 6 began.**  ![the board when thermal-vias, visit 6 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-thermal-vias-6-start.png) +### pours, visit 3++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++Why the AI came back here: Board34 local via-count review complete; reverify existing saved pours against exact current specification++**Clip: pours, visit 3, still recording (started 2026-10-13T05:22:06Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 3 began.**++![the board when pours, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-pours-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 15 % | -2.0 % |+| claude | 5h | 17 % | 18 % | 1.0 % | | claude | Fable | 0 % | 0 % | 0.0 % |-| claude | week | 54 % | 24 % | -30.0 % |-| codex | week | 2 % | 55 % | 53.0 % |+| claude | week | 54 % | 25 % | -29.0 % |+| codex | week | 2 % | 1 % | -1.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*