Adom Custom Electronic Load

@@ -294,3 +294,19 @@ A14.16-second normal-speed saved-model inspection shows the added copper spacer, <video width="100%" playsinline controls preload="metadata" poster="videos/passive-contact-v3/poster.jpg" src="videos/passive-contact-v3/inspection.mp4"></video>  [Contact study](../mechanical/passive-contact-study/README.md) · [Capture provenance](../videos/passive-contact-v3/capture.json).++## Side-mounted fan, layers and pad geometry++Two native Pup captures show the project as it was reviewed during the redesign. Both were decoded and their nine-frame contact sheets inspected. These are model-review moments, not hardware tests or a final fabrication release.++The first shows the green assembly and independent visibility layers: heatsink, fan bracket and carrier are hidden, then restored. The displayed PCB is the earlier side-fan candidate. The second shows R13 with three added test pads, PCB-derived mask openings, and the Q1 insulating/spreader stack revealed beneath the heatsink. Later R23 changes rotate J9 and shorten the switch-node probe branch; they are not shown in these clips.++<video controls preload="metadata" poster="docs/clips/sidefan-layers-poster.jpg" src="docs/clips/sidefan-layers-2x.mp4"></video>++![Layer-toggle capture contact sheet](docs/clips/sidefan-layers-sheet.jpg)++<video controls preload="metadata" poster="docs/clips/sidefan-r13-contact-poster.jpg" src="docs/clips/sidefan-r13-contact-2x.mp4"></video>++![R13 contact reveal capture contact sheet](docs/clips/sidefan-r13-contact-sheet.jpg)++Playback is 2×. Raw R13 take: 24.1 s. An automatic routing take captured the old Board32 window and is explicitly rejected from the demo. [Capture index](../videos/probing/clips.json) · [Rejected take](../videos/probing/rejected-aiflow-takes.json).

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

@@ -50,5 +50,20 @@     "verifiedAction": "Native Pup window recording; decoded frame at 11 s reviewed. CAD review only; no hardware or probing simulation proof.",     "timingCaveat": "Recorder timestamp repair declined because sample count differed; ffprobe duration recorded separately.",     "sha256": "5d81c0321ae2e23be05299df26f07f867a1cfc9f66a25e50c6269ed81d928be1"+  },+  {+    "file": "videos/probing/window-27199580-20261013-031121.mp4",+    "durationSeconds": 24.033333,+    "description": "Optimized green PCB hero orbit with independent heatsink, fan bracket and carrier visibility toggles",+    "verifiedAction": "Decoded frame at 12s inspected; actual wiki layer controls driven through public viewer API. Rendering review only.",+    "sha256": "a034150bbaec8dda96772bfe40469ea0d3eeaeca576c612a6f65288244d5ddce"+  },+  {+    "file": "window-27199580-20261013-033540.mp4",+    "durationSeconds": 24.1,+    "sha256": "659e2cfeddab67f72d432c9d27291bd5dea88fefbf01eaf703b395101537ae58",+    "highlight": "R13 native DRC/ERC-clean PCB with PCB-derived pad/mask geometry, side fan and Q1 thermal contact reveal",+    "review": "Frame at 11 seconds visually inspected; contact visible, heatsink hidden and restored. Candidate, not final PCB.",+    "status": "usable-engineering-process"   } ]

@@ -0,0 +1,7 @@+[+  {+    "file": "window-2565810-20261013-025144.mp4",+    "status": "rejected",+    "reason": "AIFlow captured old Board32 CAD window instead of DFT candidate; not evidence of new routing"+  }+]