Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1908.1 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1910.6 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 216.6 | 1074 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1908.1** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 219.0 | 1074 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1910.6** | | |  ## Per step @@ -46,8 +46,8 @@ AI time only, the idle cut out. | pours | 5.8 | 0.0 | 5.8 | 22 | 3 | 0 | 0.0 min | | current | 78.5 | 0.0 | 78.5 | 129 | 3 | 0 | 0.0 min | | thermal | 99.3 | 0.0 | 99.3 | 367 | 3 | 0 | 0.0 min |-| finish | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min |-| 3d | 1.2 | 0.0 | 1.2 | 5 | 2 | 0 | 0.0 min |+| finish | 0.8 | 0.0 | 0.8 | 3 | 2 | 0 | 0.0 min |+| 3d | 2.7 | 0.0 | 2.7 | 7 | 2 | 0 | 0.0 min | | components | 66.3 | 0.0 | 66.3 | 386 | 2 | 1 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | export | 0.6 | 0.0 | 0.6 | 7 | 1 | 0 | 0.0 min |@@ -56,11 +56,11 @@ AI time only, the idle cut out. | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min | | nets | 1.7 | 0.0 | 1.7 | 4 | 2 | 0 | 0.0 min | | outline | 1.6 | 0.0 | 1.6 | 10 | 3 | 0 | 0.0 min |-| rules | 1509.4 | 0.0 | 1509.4 | 14 | 1 | 0 | 0.0 min |+| rules | 1510.3 | 0.0 | 1510.3 | 14 | 1 | 0 | 0.0 min | | silkscreen | 2.6 | 0.0 | 2.6 | 9 | 2 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min | | thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |-| **total** | **1908.1** | **0.3** | **1907.8** | | | | |+| **total** | **1910.6** | **0.3** | **1910.2** | | | | |  ## Returns to earlier steps @@ -247,6 +247,7 @@ AI time only, the idle cut out. - 2026-10-13T07:58:14Z clip-start:silkscreen-2 - 2026-10-13T07:59:00Z capture-stop - 2026-10-13T08:04:25Z clip-start:3d-2+- 2026-10-13T08:06:54Z clip-start:finish-2  ## Where the board stands @@ -1184,12 +1185,28 @@ What this step does: Make both faces useful in real service: references and valu  What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse -**Clip: 3d, visit 2, still recording (started 2026-10-13T08:04:25Z); it appears here when the step ends.**+**Clip: 3d, visit 2, the PCB editor from 2026-10-13T08:05:20Z to 2026-10-13T08:05:45Z. Motion only: 0.4 min of real time, 10 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/3d-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the 3d, visit 2 clip, what the camera saw.**++![nine frames of 3d, visit 2](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/3d-2-sheet.png)  **Screenshot: the board when 3d, visit 2 began.**  ![the board when 3d, visit 2 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-3d-2-start.png) +### finish, visit 2++What this step does: finish refuses until everything is true; the AI cuts the video and delivers++**Clip: finish, visit 2, still recording (started 2026-10-13T08:06:54Z); it appears here when the step ends.**++**Screenshot: the board when finish, visit 2 began.**++![the board when finish, visit 2 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-finish-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.