Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1864.6 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1866.6 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 173.1 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1864.6** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 175.0 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1866.6** | | |  ## Per step @@ -43,7 +43,7 @@ AI time only, the idle cut out. | intake | 2.6 | 0.3 | 2.2 | 3 | 1 | 0 | 0.3 min | | placement | 9.5 | 0.0 | 9.5 | 31 | 5 | 3 | 0.0 min | | routing | 63.4 | 0.0 | 63.4 | 92 | 7 | 2 | 0.0 min |-| pours | 5.0 | 0.0 | 5.0 | 19 | 3 | 0 | 0.0 min |+| pours | 5.8 | 0.0 | 5.8 | 22 | 3 | 0 | 0.0 min | | current | 78.1 | 0.0 | 78.1 | 123 | 2 | 0 | 0.0 min | | thermal | 89.0 | 0.0 | 89.0 | 350 | 2 | 0 | 0.0 min | | finish | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min |@@ -55,12 +55,12 @@ AI time only, the idle cut out. | libraries | 3.8 | 0.0 | 3.8 | 18 | 2 | 0 | 0.0 min | | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min | | nets | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min |-| outline | 0.4 | 0.0 | 0.4 | 4 | 2 | 0 | 0.0 min |-| rules | 1487.6 | 0.0 | 1487.6 | 14 | 1 | 0 | 0.0 min |+| outline | 0.4 | 0.0 | 0.4 | 5 | 3 | 0 | 0.0 min |+| rules | 1488.8 | 0.0 | 1488.8 | 14 | 1 | 0 | 0.0 min | | silkscreen | 0.7 | 0.0 | 0.7 | 3 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min | | thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |-| **total** | **1864.6** | **0.3** | **1864.3** | | | | |+| **total** | **1866.6** | **0.3** | **1866.2** | | | | |  ## Returns to earlier steps @@ -219,6 +219,10 @@ AI time only, the idle cut out. - 2026-10-13T04:16:21Z clip-start:thermal-vias-6 - 2026-10-13T04:16:35Z capture-stop - 2026-10-13T05:22:06Z clip-start:pours-3+- 2026-10-13T05:22:49Z net GND: 179 items highlighted+- 2026-10-13T05:22:54Z net LOAD_POS: 60 items highlighted+- 2026-10-13T05:22:58Z net SHUNT_P: 23 items highlighted+- 2026-10-13T05:23:56Z clip-start:outline-3  ## Where the board stands @@ -995,12 +999,34 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  Why the AI came back here: Board34 local via-count review complete; reverify existing saved pours against exact current specification -**Clip: pours, visit 3, still recording (started 2026-10-13T05:22:06Z); it appears here when the step ends.**+**Clip: pours, visit 3, the PCB editor from 2026-10-13T05:22:06Z to 2026-10-13T05:23:36Z. Motion only: 1.5 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/pours-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 3 clip, what the camera saw.**++![nine frames of pours, visit 3](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/pours-3-sheet.png)  **Screenshot: the board when pours, visit 3 began.**  ![the board when pours, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-pours-3-start.png) +**Screenshot: the board when pours, visit 3 ended.**++![the board when pours, visit 3 ended](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-pours-3-end.png)++### outline, visit 3++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++Why the AI came back here: Existing Board34 pours verified and copper measured; check current rounded outline++**Clip: outline, visit 3, still recording (started 2026-10-13T05:23:56Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 3 began.**++![the board when outline, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-outline-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.