Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1892.9 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1900.6 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 201.4 | 1074 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1892.9** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 209.0 | 1074 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1900.6** | | |  ## Per step @@ -51,16 +51,16 @@ AI time only, the idle cut out. | components | 66.3 | 0.0 | 66.3 | 386 | 2 | 1 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | export | 0.6 | 0.0 | 0.6 | 7 | 1 | 0 | 0.0 min |-| fields | 7.0 | 0.0 | 7.0 | 5 | 2 | 0 | 0.0 min |+| fields | 13.4 | 0.0 | 13.4 | 9 | 2 | 0 | 0.0 min | | libraries | 3.8 | 0.0 | 3.8 | 18 | 2 | 0 | 0.0 min | | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min |-| nets | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min |+| nets | 0.9 | 0.0 | 0.9 | 3 | 2 | 0 | 0.0 min | | outline | 1.6 | 0.0 | 1.6 | 10 | 3 | 0 | 0.0 min |-| rules | 1503.3 | 0.0 | 1503.3 | 14 | 1 | 0 | 0.0 min |+| rules | 1504.5 | 0.0 | 1504.5 | 14 | 1 | 0 | 0.0 min | | silkscreen | 0.7 | 0.0 | 0.7 | 3 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min | | thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |-| **total** | **1892.9** | **0.3** | **1892.6** | | | | |+| **total** | **1900.5** | **0.3** | **1900.2** | | | | |  ## Returns to earlier steps @@ -232,6 +232,10 @@ AI time only, the idle cut out. - 2026-10-13T05:33:07Z capture-stop - 2026-10-13T06:12:36Z artifact probing-collision-review for thermal-3: Board34 R9: full modeled route passes, 20 touches, 14528 poses, zero collisions/snags. Wire wear and thermal qualification remain open. - 2026-10-13T07:03:17Z artifact analysis-image for thermal-3: Unadopted passive cooling sensitivity. Nominal calculation passes; +10 percent sink resistance fails the unchanged package-rise screen. No installed thermal acceptance.+- 2026-10-13T07:56:41Z artifact analysis-image for fields-2: Board34 / R10 current: fresh 0.1 mm supplied-parameter screen; no hardware qualification+- 2026-10-13T07:56:44Z artifact analysis-image for fields-2: Board34 / R10 heat: fresh 0.1 mm supplied-parameter screen; no hardware qualification+- 2026-10-13T07:56:46Z artifact analysis-image for fields-2: Board34 / R10 temperature: fresh 0.1 mm supplied-parameter screen; no hardware qualification+- 2026-10-13T07:56:52Z clip-start:nets-2  ## Where the board stands @@ -1089,13 +1093,47 @@ Why the AI came back here: Board34 exact-spec current screen and native net walk  ![Unadopted passive cooling sensitivity. Nominal calculation passes; +10 percent sink resistance fails the unchanged package-rise screen. No installed thermal acceptance.](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-3-analysis-image-1.png) +### fields, visit 2++What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera++**Clip: fields, visit 2, the PCB editor from 2026-10-13T07:50:13Z to 2026-10-13T07:54:58Z. Motion only: 4.7 min of real time, 174 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/fields-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the fields, visit 2 clip, what the camera saw.**++![nine frames of fields, visit 2](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/fields-2-sheet.png)++**The AI's drawing: Board34 / R10 current: fresh 0.1 mm supplied-parameter screen; no hardware qualification**++![Board34 / R10 current: fresh 0.1 mm supplied-parameter screen; no hardware qualification](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/fields-2-analysis-image-0.png)++**The AI's drawing: Board34 / R10 heat: fresh 0.1 mm supplied-parameter screen; no hardware qualification**++![Board34 / R10 heat: fresh 0.1 mm supplied-parameter screen; no hardware qualification](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/fields-2-analysis-image-1.png)++**The AI's drawing: Board34 / R10 temperature: fresh 0.1 mm supplied-parameter screen; no hardware qualification**++![Board34 / R10 temperature: fresh 0.1 mm supplied-parameter screen; no hardware qualification](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/fields-2-analysis-image-2.png)++### nets, visit 2++What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one++**Clip: nets, visit 2, still recording (started 2026-10-13T07:56:52Z); it appears here when the step ends.**++**Screenshot: the board when nets, visit 2 began.**++![the board when nets, visit 2 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-nets-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 6 % | -11.0 % |+| claude | 5h | 17 % | 7 % | -10.0 % | | claude | Fable | 0 % | 0 % | 0.0 % | | claude | week | 54 % | 27 % | -27.0 % | | codex | week | 2 % | 7 % | 5.0 % |