← Commit history

aiflow run board-codex-20261007-1749: components

John Lauer ·8cdcd96dd6 · ·parent 84c5a7a
25 files changed +1142−13
docs/runs/board-codex-20261007-1749/README.md+129−13docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-10.json+64docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-8.json+38docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-9.json+49docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-1.pngdocs/runs/board-codex-20261007-1749/thermal-1-analysis-image-20.pngdocs/runs/board-codex-20261007-1749/thermal-1-analysis-image-21.pngdocs/runs/board-codex-20261007-1749/thermal-1-analysis-image-6.pngdocs/runs/board-codex-20261007-1749/thermal-1-engineering-review-11.json+99docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-12.json+41docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-13.json+29docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-14.json+48docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-15.json+20docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-16.json+43docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-18.json+37docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-19.json+14docs/runs/board-codex-20261007-1749/thermal-1-geometry-review-0.md+30docs/runs/board-codex-20261007-1749/thermal-1-procurement-review-17.json+291docs/runs/board-codex-20261007-1749/thermal-1-review-document-4.json+98docs/runs/board-codex-20261007-1749/thermal-1-review-document-5.json+97docs/runs/board-codex-20261007-1749/thermal-1-review-video-3.mp4docs/runs/board-codex-20261007-1749/thermal-1-review-video-7.mp4docs/runs/board-codex-20261007-1749/thermal-1-sheet.pngdocs/runs/board-codex-20261007-1749/thermal-1-thermal-study-2.md+15docs/runs/board-codex-20261007-1749/thermal-1.mp4
docs/runs/board-codex-20261007-1749/README.md+129−13
@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `thermal`, 791.0 min of AI time since the prompt (4194.3 min on the wall clock). This page updates at every step change.+**Running**: step `components`, 1038.3 min of AI time since the prompt (5568.2 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -21,8 +21,9 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 9 | 2026-10-09T13:26:48Z | (open) | 198.1 | 88 | Continue original electronic-load objective. Compact 5 W prototype is the working basis fr | | 10 | 2026-10-09T18:12:40Z | (open) | 10.1 | 99 | Resume electronic-load completion: inspect native board, land reviewed diode thermal vias  | | 11 | 2026-10-09T20:02:16Z | (open) | 220.9 | 861 | Continue board 18 to completion; resolve package-mounted cooling and thermal solver suppor |-| 12 | 2026-10-10T14:04:14Z | (open) | 64.2 | 35 | Continue electronic-load engineering and recorded workflow; magnetic-field question withdr |-| **all** | | | **791.0** | | |+| 12 | 2026-10-10T14:04:14Z | (open) | 202.2 | 312 | Continue electronic-load engineering and recorded workflow; magnetic-field question withdr |+| 13 | 2026-10-10T22:38:10Z | (open) | 109.3 | 850 | Continue to the finish line; resolve supported cooling design and remaining deliverables,  |+| **all** | | | **1038.3** | | |  ## Per step @@ -35,16 +36,16 @@ AI time only, the idle cut out. | routing | 59.2 | 0.0 | 59.2 | 67 | 5 | 1 | 0.0 min | | pours | 4.7 | 0.0 | 4.7 | 16 | 1 | 0 | 0.0 min | | current | 77.8 | 0.0 | 77.8 | 120 | 1 | 0 | 0.0 min |-| thermal | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |-| components | 11.9 | 0.0 | 11.9 | 28 | 1 | 0 | 0.0 min |+| thermal | 54.8 | 0.0 | 54.8 | 258 | 1 | 0 | 0.0 min |+| components | 11.9 | 0.0 | 11.9 | 29 | 2 | 1 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min | | models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min | | outline | 0.1 | 0.0 | 0.1 | 2 | 1 | 0 | 0.0 min |-| rules | 594.3 | 0.0 | 594.3 | 14 | 1 | 0 | 0.0 min |+| rules | 786.8 | 0.0 | 786.8 | 14 | 1 | 0 | 0.0 min | | test-plan | 0.1 | 0.0 | 0.1 | 5 | 1 | 0 | 0.0 min | | thermal-vias | 26.9 | 0.0 | 26.9 | 177 | 4 | 0 | 0.0 min |-| **total** | **791.0** | **0.3** | **790.6** | | | | |+| **total** | **1038.3** | **0.3** | **1038.0** | | | | |  ## Returns to earlier steps @@ -52,6 +53,7 @@ AI time only, the idle cut out. - 2026-10-09T12:52:33Z back to **routing** (visit 3): Adopt and recheck native USB layout and zero-ohm link revision before remaining thermal and fabrication stages - 2026-10-09T13:52:38Z back to **placement** (visit 3): Make room for offset cooling while preserving probe access: relocate TP4, TP8 and fan connector after isolated native zero-error zero-open gate - 2026-10-09T15:42:59Z back to **placement** (visit 4): Rotate D1 and reroute power paths after native DRC and paired current review; one shunt constriction remains unresolved+- 2026-10-11T14:37:22Z back to **components** (visit 2): Component audit is incomplete: 94 pending and 10 stale reference reviews; zero wikiPage links in the register. Reconcile existing reusable pages and create missing qualified part pages before claiming this stage complete. Preserve current PCB and historical analysis evidence.  ## Decisions along the way @@ -100,14 +102,59 @@ AI time only, the idle cut out. - 2026-10-09T23:56:36Z clip-start:current-1 - 2026-10-09T23:56:59Z capture-stop - 2026-10-10T13:01:38Z artifact analysis-image for current-1: Candidate v27 native copper review at fine-mesh hotspots; current screen failed, board not landed+- 2026-10-10T15:43:47Z capture-stop+- 2026-10-10T16:16:38Z artifact geometry-review for thermal-1: Exact v85 model reviewed; 1110 valid solids and 11 checked molecule connections; cooling/export contract remains open+- 2026-10-10T16:42:25Z artifact analysis-image for thermal-1: v85 cooling parameter sensitivity: full-power still-air failure retained, no qualification+- 2026-10-10T16:45:23Z artifact thermal-study for thermal-1: Coupled fine-grid package screen and assumptions; formal thermal gate remains open+- 2026-10-10T17:16:55Z artifact review-document for thermal-1: Rotated fan carrier: nominal body/probe clearance; retention and harness unfinished+- 2026-10-10T17:16:55Z artifact review-document for thermal-1: Native two-layer manufacturing review; not fabrication release+- 2026-10-10T17:16:55Z artifact review-video for thermal-1: Actual rotated-carrier inspection at 2x; nominal assembly only+- 2026-10-10T17:17:30Z artifact review-document for thermal-1: Rotated fan carrier: nominal geometry checks; not qualified+- 2026-10-10T17:17:30Z artifact review-document for thermal-1: Review-only native Gerber, drill and position checks+- 2026-10-10T17:32:00Z artifact analysis-image for thermal-1: Single GLB with nominal installed fan harness and simulated states; thermal gate remains open+- 2026-10-10T17:32:00Z artifact review-video for thermal-1: Actual gentle simulated fan state cycle; custom harness study, 2x playback+- 2026-10-10T17:42:05Z artifact analysis-data for thermal-1: Control-panel fan twin verified: disconnected and stale telemetry stay unknown; no hardware measurements+- 2026-10-10T17:54:22Z artifact analysis-data for thermal-1: Insulated sensor candidate: nominal route and bend checks; attachment and calibration unqualified+- 2026-10-10T17:58:29Z artifact analysis-data for thermal-1: Finished copper capability needs confirmation: 17.5 um isolated screen fails five current nets; formal 35 um board unchanged+- 2026-10-10T18:04:06Z artifact engineering-review for thermal-1: 35 µm candidate: six current screens pass; thermal and finished copper unresolved+- 2026-10-10T18:10:21Z artifact engineering-review for thermal-1: PEEK fastener nominal fit; preload, TIM and retention remain unqualified+- 2026-10-10T18:10:41Z artifact engineering-review for thermal-1: PEEK fastener nominal fit; preload, TIM and retention remain unqualified+- 2026-10-10T18:18:11Z artifact engineering-review for thermal-1: Artifact overwrite fix: 150 tests pass; release verification pending+- 2026-10-10T18:20:17Z artifact engineering-review for thermal-1: AIFlow 0.1.87 verified in source, package, download and installation; artifact history protected+- 2026-10-10T18:22:45Z artifact engineering-review for thermal-1: Alternative drawing-led AlN/PEEK stack clears nominal geometry; qualification pending+- 2026-10-10T18:30:03Z artifact engineering-review for thermal-1: 240 host fan-shutdown timing cases pass; hardware latency and thermal qualification remain open+- 2026-10-10T18:32:47Z artifact engineering-review for thermal-1: Passive sink alternatives screened; larger candidate needs mounting and installed-cooling qualification+- 2026-10-10T18:36:42Z artifact procurement-review for thermal-1: Exact-part listings add $6.40; bulk-price and stock exclusions remain explicit+- 2026-10-10T19:44:01Z capture-start+- 2026-10-10T19:44:07Z net DUT_POS: 21 items highlighted+- 2026-10-10T19:44:11Z net DUT_FUSED: 14 items highlighted+- 2026-10-10T19:44:16Z net LOAD_POS: 60 items highlighted+- 2026-10-10T19:44:20Z net SHUNT_P: 23 items highlighted+- 2026-10-10T19:44:25Z net GND: 172 items highlighted+- 2026-10-10T19:44:29Z net 5V_AUX: 77 items highlighted+- 2026-10-10T19:44:42Z capture-stop+- 2026-10-10T19:46:50Z artifact engineering-review for thermal-1: Sensor uncertainty screen: indicated 55 C is not a guaranteed actual-case ceiling+- 2026-10-10T19:48:55Z artifact engineering-review for thermal-1: Actual STM32 fan adapter passes fake-HAL boundary tests; no physical timing claim+- 2026-10-10T22:44:48Z capture-start+- 2026-10-10T22:45:25Z capture-stop+- 2026-10-10T22:48:58Z capture-start+- 2026-10-10T22:49:17Z net USB_DP: 3 items highlighted+- 2026-10-10T22:49:21Z net USB_DM: 6 items highlighted+- 2026-10-10T22:49:26Z net FAN_TACH: 74 items highlighted+- 2026-10-10T22:49:51Z capture-stop+- 2026-10-10T22:58:54Z artifact analysis-image for thermal-1: Board22 exact-file current screen at assumed 35um surface/25um barrel. All six nets below60 A/mm2. Finished copper and thermal qualification remain open.+- 2026-10-10T23:59:36Z artifact analysis-image for thermal-1: Board24 current density: assumed 35/25 µm copper, display capped; exact peak 58.18 A/mm². Thermal qualification open.+- 2026-10-10T23:59:47Z artifact analysis-image for thermal-1: Board24 current density from 16-bit solver textures: assumed 35/25 µm copper; capped display, exact peak 58.18 A/mm². Thermal qualification open.  ## Where the board stands  - routing: 0 unrouted after null passes - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries+- pours (verified-existing): 9 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":2952.03,"F.Cu":2737.55} - analyze-current: pass+- analyze-thermal: fail  ## The steps on camera @@ -429,7 +476,73 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, still recording (started 2026-10-10T15:43:32Z); it appears here when the step ends.**+**Clip: thermal, the PCB editor from 2026-10-10T15:43:32Z to 2026-10-10T15:43:47Z. Motion only: 0.3 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal clip, what the camera saw.**++![nine frames of thermal](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-sheet.png)++**The AI's file: Exact v85 model reviewed; 1110 valid solids and 11 checked molecule connections; cooling/export contract remains open** [thermal-1-geometry-review-0.md](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-geometry-review-0.md)++**The AI's drawing: v85 cooling parameter sensitivity: full-power still-air failure retained, no qualification**++![v85 cooling parameter sensitivity: full-power still-air failure retained, no qualification](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-1.png)++**The AI's file: Coupled fine-grid package screen and assumptions; formal thermal gate remains open** [thermal-1-thermal-study-2.md](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-thermal-study-2.md)++**The AI's file: Actual rotated-carrier inspection at 2x; nominal assembly only** [thermal-1-review-video-3.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-review-video-3.mp4)++**The AI's file: Rotated fan carrier: nominal geometry checks; not qualified** [thermal-1-review-document-4.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-review-document-4.json)++**The AI's file: Review-only native Gerber, drill and position checks** [thermal-1-review-document-5.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-review-document-5.json)++**The AI's drawing: Single GLB with nominal installed fan harness and simulated states; thermal gate remains open**++![Single GLB with nominal installed fan harness and simulated states; thermal gate remains open](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-6.png)++**The AI's file: Actual gentle simulated fan state cycle; custom harness study, 2x playback** [thermal-1-review-video-7.mp4](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-review-video-7.mp4)++**The AI's file: Control-panel fan twin verified: disconnected and stale telemetry stay unknown; no hardware measurements** [thermal-1-analysis-data-8.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-8.json)++**The AI's file: Insulated sensor candidate: nominal route and bend checks; attachment and calibration unqualified** [thermal-1-analysis-data-9.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-9.json)++**The AI's file: Finished copper capability needs confirmation: 17.5 um isolated screen fails five current nets; formal 35 um board unchanged** [thermal-1-analysis-data-10.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-10.json)++**The AI's file: 35 µm candidate: six current screens pass; thermal and finished copper unresolved** [thermal-1-engineering-review-11.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-11.json)++**The AI's file: PEEK fastener nominal fit; preload, TIM and retention remain unqualified** [thermal-1-engineering-review-12.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-12.json)++**The AI's file: AIFlow 0.1.87 verified in source, package, download and installation; artifact history protected** [thermal-1-engineering-review-13.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-13.json)++**The AI's file: Alternative drawing-led AlN/PEEK stack clears nominal geometry; qualification pending** [thermal-1-engineering-review-14.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-14.json)++**The AI's file: 240 host fan-shutdown timing cases pass; hardware latency and thermal qualification remain open** [thermal-1-engineering-review-15.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-15.json)++**The AI's file: Passive sink alternatives screened; larger candidate needs mounting and installed-cooling qualification** [thermal-1-engineering-review-16.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-16.json)++**The AI's file: Exact-part listings add $6.40; bulk-price and stock exclusions remain explicit** [thermal-1-procurement-review-17.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-procurement-review-17.json)++**The AI's file: Sensor uncertainty screen: indicated 55 C is not a guaranteed actual-case ceiling** [thermal-1-engineering-review-18.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-18.json)++**The AI's file: Actual STM32 fan adapter passes fake-HAL boundary tests; no physical timing claim** [thermal-1-engineering-review-19.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-19.json)++**The AI's drawing: Board22 exact-file current screen at assumed 35um surface/25um barrel. All six nets below60 A/mm2. Finished copper and thermal qualification remain open.**++![Board22 exact-file current screen at assumed 35um surface/25um barrel. All six nets below60 A/mm2. Finished copper and thermal qualification remain open.](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-20.png)++**The AI's drawing: Board24 current density from 16-bit solver textures: assumed 35/25 µm copper; capped display, exact peak 58.18 A/mm². Thermal qualification open.**++![Board24 current density from 16-bit solver textures: assumed 35/25 µm copper; capped display, exact peak 58.18 A/mm². Thermal qualification open.](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-21.png)++### components, visit 2 (rework)++What this step does: Audit wiki component identity, reusable CAD quality and redistribution evidence before placement; offer cached optional MPN-marked variants.++Why the AI came back here: Component audit is incomplete: 94 pending and 10 stale reference reviews; zero wikiPage links in the register. Reconcile existing reusable pages and create missing qualified part pages before claiming this stage complete. Preserve current PCB and historical analysis evidence.++**Clip: components, visit 2 (rework), still recording (started 2026-10-11T14:37:27Z); it appears here when the step ends.**  ## Plan usage, the second cost line @@ -437,20 +550,23 @@ Percent of each plan limit used, as the provider reports it, at the start of the  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 15 % | -2.0 % |-| claude | Fable | 0 % | 3 % | 3.0 % |-| claude | week | 54 % | 76 % | 22.0 % |-| codex | week | 2 % | 56 % | 54.0 % |+| claude | 5h | 17 % | 10 % | -7.0 % |+| claude | Fable | 0 % | 0 % | 0.0 % |+| claude | week | 54 % | 6 % | -48.0 % |+| codex | week | 2 % | 1 % | -1.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*  ## Given back -4 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:+7 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:  - pr https://wiki.adom.inc/adom/adom-aiflow/prs/32: Browser access classifier and required off-board component wiki coverage; tested candidate, awaiting owner merge and release - issue https://wiki.adom.inc/adom/adom-aiflow/issues/40: Stale pour plan hid diode cooling-via candidates after a native zone relocation; request input freshness checks. - issue https://wiki.adom.inc/adom/component-hero/issues/1: Mechanical-only fan mounting footprint has no copper pads; generator needs a genuine mechanical hero path. - pr https://wiki.adom.inc/adom/adom-fields/prs/9: Distributed plated-wall coupling and removed drill voids; 32 tests; stacked owner review, shared runtime unchanged+- issue https://wiki.adom.inc/adom/adom-step2glb/issues/25: Generic duplicate molecule contact names and unverified symbol/marker contract; raw evidence and checked local derivatives supplied+- pr https://wiki.adom.inc/adom/adom-fields/prs/11: Package-to-sink thermal nodes, no double heating, physical-pad links, conservative screening; 20 tests and release build pass; owner review pending+- issue https://wiki.adom.inc/adom/service-kicad/issues/9: Native directory export transfer and premature cleanup defect; named-folder individual-file recovery verified  Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.
docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-10.jsonadded+64
@@ -0,0 +1,64 @@+{+  "status": "finished-copper-capability-unconfirmed",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "reviewedOn": "2026-10-10",+  "publicServiceAlias": "3rdPartyFab",+  "capabilityObservation": "Private capability guide lists 0.5 oz without establishing whether this is starting foil or guaranteed finished copper. Surface plating is described separately. User clarification requested; no answer assumed.",+  "acceptedAnalysis": {+    "finishedCopperUm": 35,+    "pitchMm": 0.1,+    "reference": "../unclipped-hotspots-v1/fields-v85-full-0p1/fields.json"+  },+  "thinCopperScreen": {+    "finishedCopperUm": 17.5,+    "pitchMm": 0.2,+    "reference": "fields-17p5um-0p2/fields.json",+    "barrelPlatingUm": 25,+    "barrelPlatingConfirmed": false+  },+  "limitAperMm2": 60,+  "nets": [+    {+      "net": "DUT_POS",+      "peak35umAt0p1mm": 53.4849967956543,+      "peak17p5umAt0p2mm": 94.16525268554688,+      "thinScreenPass": false+    },+    {+      "net": "LOAD_POS",+      "peak35umAt0p1mm": 40.110206604003906,+      "peak17p5umAt0p2mm": 85.5163345336914,+      "thinScreenPass": false+    },+    {+      "net": "SHUNT_P",+      "peak35umAt0p1mm": 56.50494384765625,+      "peak17p5umAt0p2mm": 110.34736633300781,+      "thinScreenPass": false+    },+    {+      "net": "GND",+      "peak35umAt0p1mm": 58.18177032470703,+      "peak17p5umAt0p2mm": 94.35797882080078,+      "thinScreenPass": false+    },+    {+      "net": "DUT_FUSED",+      "peak35umAt0p1mm": 50.66428756713867,+      "peak17p5umAt0p2mm": 83.45010375976562,+      "thinScreenPass": false+    },+    {+      "net": "5V_AUX",+      "peak35umAt0p1mm": 19.039779663085938,+      "peak17p5umAt0p2mm": 36.365814208984375,+      "thinScreenPass": true+    }+  ],+  "limitations": [+    "Different meshes: this comparison is not a quantified thickness-only convergence study.",+    "17.5 um screen cannot replace native board stackup or formal acceptance.",+    "35 um is an analysis assumption, not a confirmed process guarantee.",+    "No PCB geometry, power/current rating or gate threshold changed."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-8.jsonadded+38
@@ -0,0 +1,38 @@+{+  "version": "0.0.4",+  "pythonTests": {+    "run": 25,+    "passed": 23,+    "skipped": 2+  },+  "nodeTelemetryTests": "passed",+  "nativeBrowser": {+    "ready": true,+    "status": {+      "source": "measured",+      "speed": null,+      "state": "unknown",+      "timeScale": 0.002,+      "valid": false+    },+    "text": "Fan feedback unknown \u00b7 motion paused\nNominal cooling/harness geometry \u00b7 mounting and thermal qualification pending \u00b7 visual speed 1:500\nTip: Shift+Alt+Click sets the orbit center"+  },+  "nativeMotion": {+    "rotorPaused": true,+    "status": {+      "source": "measured",+      "speed": null,+      "state": "unknown",+      "timeScale": 0.002,+      "valid": false+    }+  },+  "screenshot": "screenshots/adom-bridge/window/2026-10-10T17-38-43.937.png",+  "scope": "Disconnected UI and software-only mapping; no physical hardware validation",+  "sha256": {+    "control-panel/server.py": "99f5b10a424a73160303514b783107415953115235010f2e1005f09bedc2d820",+    "control-panel/index.html": "5192c5b30e31547fec2116fec4c77b1125bf0493ad0189776a79f39921423194",+    "control-panel/twin/index.html": "7785918e28a1b644105398ab194e92b85d2b95d70809874fc7cf5229df1c166a",+    "control-panel/twin/telemetry.mjs": "3e4d08eb10ad88744f7f24d7eca2226c56bb30d395924714fd08a9434640b1b2"+  }+}
docs/runs/board-codex-20261007-1749/thermal-1-analysis-data-9.jsonadded+49
@@ -0,0 +1,49 @@+{+  "status": "candidate-not-adopted",+  "sensor": "NTCLE428E3103H301A",+  "housing": "M20-1060200",+  "contacts": "2 x M20-1180046 (simplified contact envelopes)",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "routes": [+    {+      "circuit": 1,+      "pathLengthMm": 81.0505797134463,+      "exactArcRadiusMm": 4.3,+      "requiredMinimumRadiusMm": 4.25,+      "rootStraightMm": 7.0,+      "minimumFactoryLeadMm": 295,+      "terminationAllowanceMm": 4,+      "minimumSlackMm": 5,+      "shortLeadFits": false,+      "longLeadFits": true,+      "provisionalCutLengthMm": 95+    },+    {+      "circuit": 2,+      "pathLengthMm": 80.44810708712711,+      "exactArcRadiusMm": 4.3,+      "requiredMinimumRadiusMm": 4.25,+      "rootStraightMm": 8.200000000000003,+      "minimumFactoryLeadMm": 295,+      "terminationAllowanceMm": 4,+      "minimumSlackMm": 5,+      "shortLeadFits": false,+      "longLeadFits": true,+      "provisionalCutLengthMm": 90+    }+  ],+  "bodyConflicts": [],+  "probeConflicts": [],+  "wireOverlapMm3": 0.0,+  "carrierSinkEnvelopeAndFanHarnessConflicts": [],+  "sensorMetalTabNominalSideGapMm": 0.11,+  "sensorTopToSinkEnvelopeGapMm": 0.79,+  "limits": [+    "Maximum cylindrical body envelope is not exact manufacturer CAD.",+    "Case edge contact and adhesive are unqualified; sensor must track metal case rather than airflow or plastic temperature.",+    "Sensor coating must not be compressed; compatibility/strain relief remain unresolved.",+    "40 +/-5 mm version is rejected for reach; the 300 +/-5 mm variant is evaluated with provisional trim lengths.",+    "Checks include carrier, sink envelope and nominal fan harness; detailed heatsink relief, clamp, mating tools and tolerances remain excluded.",+    "No change to formal board, BOM, firmware, calibration or acceptance."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-1.pngadded
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-20.pngadded
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-21.pngadded
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-analysis-image-6.pngadded
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-11.jsonadded+99
@@ -0,0 +1,99 @@+{+  "status": "candidate current screen passes; thermal fails; not adopted",+  "inputIdentity": {+    "algorithm": "sha256",+    "board": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+    "solverVersion": "0.6.2",+    "spec": "06a2cd452aa7cb1f1b87fefd8c97f1595ca2073958f2739d1130da86cdd42735"+  },+  "fieldsSha256": "3be676b865b2278c8cf7539332ea80c519069ab6b2859be62fdc35eb5fbefbfc",+  "pitchMm": 0.1,+  "surfaceCopperUm": 35,+  "dielectricMm": 1.51,+  "surfaceAndBarrelLimit_A_mm2": 60,+  "nets": [+    {+      "net": "DUT_POS",+      "peakJ_A_mm2": 53.4538459777832,+      "residual": 9.853942391530799e-08,+      "peakBarrelJ_A_mm2": 31.32305238657173+    },+    {+      "net": "LOAD_POS",+      "peakJ_A_mm2": 40.08208084106445,+      "residual": 9.91818222374887e-08,+      "peakBarrelJ_A_mm2": 22.084072885900984+    },+    {+      "net": "GND",+      "peakJ_A_mm2": 58.13970947265625,+      "residual": 9.942328996737994e-08,+      "peakBarrelJ_A_mm2": 36.41305455001441+    },+    {+      "net": "SHUNT_P",+      "peakJ_A_mm2": 56.50440979003906,+      "residual": 8.97883447351078e-08,+      "peakBarrelJ_A_mm2": 33.85393111168713+    },+    {+      "net": "DUT_FUSED",+      "peakJ_A_mm2": 50.5965690612793,+      "residual": 9.730792094021261e-08,+      "peakBarrelJ_A_mm2": 11.509161945374204+    },+    {+      "net": "5V_AUX",+      "peakJ_A_mm2": 19.039779663085938,+      "residual": 9.139207627930405e-08,+      "peakBarrelJ_A_mm2": 5.876489753336553+    }+  ],+  "thermalIssues": [+    {+      "at": [+        115.12,+        91.0+      ],+      "fix": "More copper under the tab and more vias to the other layers, or a heatsink; moving air alone does not bring it in.",+      "kind": "tab-rise",+      "layer": "F.Cu",+      "net": "LOAD_POS",+      "reference": "D1",+      "severity": "high",+      "what": "D1: +138 \u00b0C at its thermal screening node in still air (+74 \u00b0C in moving air) against a 35 \u00b0C budget"+    },+    {+      "at": [+        127.46,+        82.0+      ],+      "fix": "More copper under the tab and more vias to the other layers, or a heatsink; moving air alone does not bring it in.",+      "kind": "tab-rise",+      "layer": "F.Cu",+      "net": "LOAD_POS",+      "reference": "Q1",+      "severity": "high",+      "what": "Q1: +593 \u00b0C at its thermal screening node in still air (+522 \u00b0C in moving air) against a 35 \u00b0C budget"+    },+    {+      "at": [+        136.625,+        85.7+      ],+      "fix": "More copper under the tab and more vias to the other layers, or a heatsink; moving air alone does not bring it in.",+      "kind": "tab-rise",+      "layer": "F.Cu",+      "net": "SHUNT_P",+      "reference": "RSH1",+      "severity": "high",+      "what": "RSH1: +140 \u00b0C at its thermal screening node in still air (+78 \u00b0C in moving air) against a 35 \u00b0C budget"+    }+  ],+  "limitations": [+    "Private reviewed solver; owner release pending.",+    "Finished surface and barrel copper require manufacturing confirmation.",+    "Board-only thermal model excludes the proposed case-mounted cooling path.",+    "Formal design/spec.json and PCB unchanged."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-12.jsonadded+41
@@ -0,0 +1,41 @@+{+  "status": "nominal-candidate-not-adopted",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "screw": "NBK SPE-M3-12-P",+  "nut": "NBK SPE-M3-N",+  "sourceScrew": "https://www.nbk1560.com/images/en-US/product/chemicalscrew/SPE-P/SPE-P_1.pdf",+  "sourceNut": "https://www.nbk1560.com/images/en/product/chemicalscrew/SPE-N/SPE-N_1.pdf",+  "dimensionsMm": {+    "center": [+      127.46,+      65.34+    ],+    "tabTop": 4.455,+    "assumedNominalTabThickness": 1.27,+    "headHeight": 2,+    "headDiameter": 5.5,+    "underHeadLength": 12,+    "nutAcrossFlats": 5.5,+    "nutHeight": 2.4,+    "sinkBaseReference": 4.7752,+    "assumedTIMThickness": 0.6349999999999998+  },+  "nominalHeadBottomAbovePcbMm": 1.185,+  "tabThicknessOnlyWorstHeadClearanceMm": 1.0550000000000002,+  "nominalProtrusionBeyondNutMm": 2.9198000000000004,+  "nominalQ1ModelConflicts": [],+  "otherFittedBodyConflicts": [],+  "incompleteSinkModelConflicts": [],+  "sensorCandidateConflicts": [],+  "manufacturerRecommendedScrewTorqueNm": 0.105,+  "assemblyTorqueApproved": false,+  "limits": [+    "No tolerances for head, sink base, TIM or board warp are included.",+    "Nominal fitted Q1 solid checked; actual MPN tolerances and contact pressure remain unqualified.",+    "Threads, screw recess and nut chamfers omitted; this is independently generated nominal geometry.",+    "TIM outline and hole remain unresolved; no interface insulation qualification.",+    "Preload, PEEK creep, vibration retention, tool access and thermal cycling remain unqualified.",+    "Assemble fastener before soldering; head cannot pass through 3.5 mm PCB hole.",+    "No formal board, BOM, thermal evidence or firmware change."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-13.jsonadded+29
@@ -0,0 +1,29 @@+{+  "status": "published-and-installed",+  "base": "6f1e2b631890d225c43019fdf9ca10e2fa2b51f3",+  "version": "0.1.87",+  "workspaceTestsPassed": 150,+  "productionCheck": "pass",+  "preflight": "pass; focused diff reviewed",+  "rootCause": "external artifacts copied by basename, copy errors ignored; in-run sources remained mutable references",+  "change": "verified content-addressed copies and ledger SHA-256/sourceFile; existing files not overwritten",+  "publication": "source, registry, standalone and installed copy verified",+  "nativeBoardChanged": false,+  "remaining": [],+  "sourceCommit": "40cd80ecb12f80540d98b8e1732a1d635276d9c0",+  "sourceReadback": "nine changed files match",+  "registrySha256": "4f5e4e20d7f4c3fe19e42f1541aa7ac2ea81a552155c2311db346d74320ada0f",+  "binarySha256": "b4a2a13bbf2e527e1fc56061a40fc11d2961bc892be69b0b3c8028c02c89964c",+  "standaloneMatches": true,+  "installedMatches": true,+  "cliHelp": "complete help output unchanged",+  "cliWorkflow": "new regression fails on 0.1.86 and passes on 0.1.87",+  "otherChecks": [+    "component workflow",+    "dashboard lifecycle",+    "continuation",+    "widget workflow",+    "silkscreen layout"+  ],+  "wikiScreenshot": "/home/adom/project/screenshots/adom-bridge/window/2026-10-10T18-19-39.506.png"+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-14.jsonadded+48
@@ -0,0 +1,48 @@+{+  "status": "alternative-AlN-stack-not-adopted",+  "padSource": "https://files.2innova.com/innovacera-v2/2024/01/Aluminum-Nitride-Ceramic-Thermal-Pads.pdf",+  "padDrawingPage": 4,+  "bulkPriceContext": "Brochure lists USD 0.45 each at 1000 pieces for this configuration; historical EXW figure, not a current quote or one-unit price.",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "screw": "NBK SPE-M3-12-P",+  "nut": "NBK SPE-M3-N",+  "sourceScrew": "https://www.nbk1560.com/images/en-US/product/chemicalscrew/SPE-P/SPE-P_1.pdf",+  "sourceNut": "https://www.nbk1560.com/images/en/product/chemicalscrew/SPE-N/SPE-N_1.pdf",+  "dimensionsMm": {+    "center": [+      127.46,+      65.34+    ],+    "tabTop": 4.455,+    "assumedNominalTabThickness": 1.27,+    "headHeight": 2,+    "headDiameter": 5.5,+    "underHeadLength": 12,+    "nutAcrossFlats": 5.5,+    "nutHeight": 2.4,+    "sinkBaseReference": 4.7752,+    "AlNThickness": 0.635,+    "assumedGreaseFilmEach": 0.02,+    "totalInterfaceStack": 0.6749999999999998+  },+  "nominalHeadBottomAbovePcbMm": 1.185,+  "tabThicknessOnlyWorstHeadClearanceMm": 1.0550000000000002,+  "nominalProtrusionBeyondNutMm": 2.8797999999999995,+  "nominalQ1ModelConflicts": [],+  "otherFittedBodyConflicts": [],+  "incompleteSinkModelConflicts": [],+  "sensorCandidateConflicts": [],+  "manufacturerRecommendedScrewTorqueNm": 0.105,+  "assemblyTorqueApproved": false,+  "limits": [+    "No tolerances for head, sink base, TIM or board warp are included.",+    "Nominal fitted Q1 solid checked; actual MPN tolerances and contact pressure remain unqualified.",+    "Threads, screw recess and nut chamfers omitted; this is independently generated nominal geometry.",+    "Alternative Innovacera TO-220 drawing: 20 x 14 x 0.635 mm, hole 3.2 mm, centered widthwise 5 mm from end. No overall/hole tolerance supplied for this variant; obtain order-specific drawing.",+    "Preload, PEEK creep, vibration retention, tool access and thermal cycling remain unqualified.",+    "Assemble fastener before soldering; head cannot pass through 3.5 mm PCB hole.",+    "Sink rises 0.04 mm to include two assumed 20 micrometre grease films; existing carrier/assembly model not updated.",+    "Grease film thickness is an assembly assumption, not a demonstrated process or manufacturer tolerance.",+    "No formal board, BOM, thermal evidence or firmware change."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-15.jsonadded+20
@@ -0,0 +1,20 @@+{+  "kind": "host-software-review",+  "cases": 240,+  "pollIntervalsMs": [+    1,+    15+  ],+  "result": "pass",+  "hardwareQualified": false,+  "thermalAcceptanceChanged": false,+  "inputs": {+    "firmware/fan_tach.c": "844f00c1f77e39529bd8f667d543ecee187ff4fe91108aedb7a2c36eb22846fa",+    "firmware/load_core.c": "85017ff0a3e37e7b5e41604989326fe623e7f73427ecd8e1a29c63a38d003638",+    "firmware/stm32/fan_input.c": "d4ebe5572dbbcd1a3ea84c4e31442732a7237e94d554ec8acdc07142486e92f8",+    "firmware/stm32/main.c": "a132ee37a6e9a9261d70389fdf5d5d7d8d7e23f8c389ac1d840f26e891137cf1",+    "tests/test_fan_shutdown.c": "673502c846e39cd1e817b736535848500daa0c5adb73e940a41320098819d44d",+    "tools/check_firmware.sh": "f63202537184bee6bc35a6689bc1d55726e6945652fcd106904c061d8dbc0137"+  },+  "testLogSha256": "9e3393a9c5e7f4a7ccac1e6567c3d285bbf4933fe06125d54ee72ab2b99d94dc"+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-16.jsonadded+43
@@ -0,0 +1,43 @@+{+  "status": "screen-only-not-adopted",+  "source": "https://wakefieldthermal.com/content/catalogs/Thermal_Extrusions_WakefieldThermal-2025.pdf",+  "pdfPage": 9,+  "printedPage": 5,+  "ambientC": 40,+  "q1HeatW": 5.5,+  "caseLimitC": 55,+  "assumedInterfaceAndSpreadingCPerW": 0.52731,+  "maximumSinkCPerW": 2.199962727272727,+  "rows": [+    {+      "stockMpn": "125301",+      "assumedCutLengthMm": 76.2,+      "widthMm": 71.11999999999999,+      "heightMm": 31.75,+      "catalogNaturalCPerW": 2.9,+      "conditionalCaseC": 58.850205+    },+    {+      "stockMpn": "125313",+      "assumedCutLengthMm": 76.2,+      "widthMm": 73.02499999999999,+      "heightMm": 33.324799999999996,+      "catalogNaturalCPerW": 2.3,+      "conditionalCaseC": 55.550205+    },+    {+      "stockMpn": "125319",+      "assumedCutLengthMm": 76.2,+      "widthMm": 76.0984,+      "heightMm": 50.8,+      "catalogNaturalCPerW": 1.5,+      "conditionalCaseC": 51.150205+    }+  ],+  "limits": [+    "Catalog values refer to three-inch natural-convection specimens; operating rise, orientation and installation conditions are not fully specified.",+    "Existing interface/spreading assumption has not been established for these extrusions.",+    "No mounting, fan obstruction, price, final machining or assembly qualification.",+    "No formal spec, board, thermal gate or BOM changes."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-18.jsonadded+37
@@ -0,0 +1,37 @@+{+  "status": "conditional-static-sensitivity-not-qualified",+  "candidate": "NTCLE428E3103H301A",+  "sourceInputSha256": "ec74f77efe9446a6b4a54ddd3d1e1837ebfdeb26ede5a460a8da358be896b5ae",+  "source": "https://www.vishay.com/docs/29186/ntcle428.pdf",+  "curve": "existing NTCLE100 inverse polynomial; new sensor not adopted",+  "pullupTolerancePercent": 1,+  "adcModel": "ideal 12-bit rounding only; no offset, gain, INL, reference or noise error",+  "scenarios": [+    {+      "indicatedTripC": 55,+      "largestTripAdcCode": 942,+      "earliestStaticActualC": 53.69209465665597,+      "latestStaticActualC": 56.18731748129479+    },+    {+      "indicatedTripC": 54,+      "largestTripAdcCode": 969,+      "earliestStaticActualC": 52.71687050913772,+      "latestStaticActualC": 55.17494382993744+    },+    {+      "indicatedTripC": 53,+      "largestTripAdcCode": 997,+      "earliestStaticActualC": 51.725116440137214,+      "latestStaticActualC": 54.16813003623115+    }+  ],+  "responseTimeSourceSeconds": 2.5,+  "responseTimeMedium": "oil; cannot be reused as installed response or an RC time constant",+  "limits": [+    "Resistance tolerances use manufacturer Table 5 with log-resistance interpolation; interpolated extrema are a screen, not guaranteed between-tabulated bounds.",+    "No attachment gradient, thermal lag, self-heating, ADC electrical error or resistor temperature drift included.",+    "No software trip setting, formal case ceiling, BOM or hardware comparator change.",+    "A 55 C indicated cutoff alone does not guarantee a 55 C actual case ceiling."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-engineering-review-19.jsonadded+14
@@ -0,0 +1,14 @@+{+  "status": "host-adapter-tests-pass",+  "hardwareTimingQualified": false,+  "firmwareChanged": false,+  "inputs": {+    "firmware/stm32/fan_input.c": "d4ebe5572dbbcd1a3ea84c4e31442732a7237e94d554ec8acdc07142486e92f8",+    "firmware/fan_tach.c": "844f00c1f77e39529bd8f667d543ecee187ff4fe91108aedb7a2c36eb22846fa",+    "tests/test_fan_input.c": "061f80a01f00b635bd574057c9b045a0f7427368b8edb71a967f4b6e5db72031",+    "tests/fan_hal_stub/stm32g0xx_hal.h": "b0e2892c065f28e761b8effb41e295fbddab71ccb2116ab28dde86053701952c",+    "tools/check_firmware.sh": "21cfce018ddbd808349f25413bb3921399bed9f2154140fde840b7b3c2cfe19d"+  },+  "log": "design/fan-adapter-test.log",+  "logSha256": "6278abe04f71b5c0c14e8efae39369277001ac8744311c419e472eb181b33c99"+}
docs/runs/board-codex-20261007-1749/thermal-1-geometry-review-0.mdadded+30
@@ -0,0 +1,30 @@+# Board model review — v85 prototype++The current board preview is a STEP-derived GLB of AIFlow board 21. Its copper and solder-mask checks pass. This is a geometry review, not a fabrication release or complete cooled molecule.++[Watch the actual top-to-underside inspection, 2×](clips/board-glb-review.mp4) · [Download review GLB](../mechanical/v85-review.glb) · [Copper/mask check](../mechanical/v85-glb-check.json)++Native KiCad 10.0.5 exported the saved board with components, tracks, pads, zones, solder mask and silkscreen. The exporter reported six wire self-interference warnings. Independent OpenCascade import found 1,110 solids, all valid, and a valid complete imported shape. This does not prove that no geometry was omitted by the exporter. [Validity check](../mechanical/v85-step-validity.json)++Visual inspection covers the populated top, exposed test points, corner pins and underside. The cooler is absent. Exact cooling hardware, mating plugs, harness and clamp/tool access remain to be assembled and checked.++## Electrical interface++All eleven interface pad identities agree between the saved PCB and the independent netlist. Their converter coordinates also agree relative to MP1. Names include reference designators so multiple ground contacts remain individually addressable.++| Reference | Electrical net | Unique connection name |+|---|---|---|+| J1 | DUT_POS | DUT_POS_J1 |+| J2 | GND | GND_J2 |+| J3 | 5V_AUX | 5V_AUX_J3 |+| J4 | GND | GND_J4 |+| J5 | UART_TX | UART_TX_J5 |+| J6 | UART_RX | UART_RX_J6 |+| J7 | GND | GND_J7 |+| MP1–MP4 | GND | GND_MP1 through GND_MP4 |++UART names are from the load's perspective: TX is its output and RX is its input. Auxiliary power is separate from the DUT. These labels do not establish connector current ratings or electrical qualification.++[Checked map and limitations](../mechanical/v85-interface-check.json) · [Named footprint derivative](../mechanical/v85-named_footprint.json) · [Named symbol derivative](../mechanical/v85-named_symbol.json) · [Reproduce the interface audit](../tools/molecule_interface.py)++The converter's raw outputs are preserved. They use duplicate generic contact names and a simplified symbol representation. Registration/widget compatibility is not validated. The anchoring report also identifies the medium size as an explicit parameter rather than marker-derived. These contract gaps are tracked in [adom/adom-step2glb#25](https://wiki.adom.inc/adom/adom-step2glb/issues/25); they are not silently waived for final molecule publication.
docs/runs/board-codex-20261007-1749/thermal-1-procurement-review-17.jsonadded+291
@@ -0,0 +1,291 @@+{+  "checkedOn": "2026-10-10",+  "status": "supplementary-listings-not-purchase-quote",+  "rows": [+    {+      "mpn": "0603B103J250CT",+      "quantity": 1,+      "refs": "C5",+      "snapshot": "design/sourcing-2026-10-10/0603B103J250CT.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "791-0603B103J250CT",+      "stock": 30935,+      "listingUnitUsd": "0.42",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Walsin/0603B103J250CT?qs=fIkAfuXiAQIquaZrPEVThw%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.42"+    },+    {+      "mpn": "0603B104J500CT",+      "quantity": 11,+      "refs": "C1 C3 C4 C11 C12 C13 C14 C15 C16 C17 C18",+      "snapshot": "design/sourcing-2026-10-10/0603B104J500CT.json",+      "scope": "board",+      "vendor": "DigiKey",+      "vendorPart": "1292-1391-2-ND",+      "stock": 888633,+      "listingUnitUsd": "0.1100",+      "productUrl": "https://www.digikey.com/en/products/detail/walsin-technology-corporation/0603B104J500CT/9354888",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "1.2100"+    },+    {+      "mpn": "0603B105K160CT",+      "quantity": 3,+      "refs": "C8 C9 C10",+      "snapshot": "design/sourcing-2026-10-10/0603B105K160CT.json",+      "scope": "board",+      "vendor": "DigiKey",+      "vendorPart": "1292-0603B105K160CTTR-ND",+      "stock": 2498,+      "listingUnitUsd": "0.1000",+      "productUrl": "https://www.digikey.com/en/products/detail/walsin-technology-corporation/0603B105K160CT/6707548",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.3000"+    },+    {+      "mpn": "0603N102J500CT",+      "quantity": 1,+      "refs": "C2",+      "snapshot": "design/sourcing-2026-10-10/0603N102J500CT.json",+      "scope": "board",+      "vendor": "DigiKey",+      "vendorPart": "1292-1477-2-ND",+      "stock": 1847679,+      "listingUnitUsd": "0.1100",+      "productUrl": "https://www.digikey.com/en/products/detail/walsin-technology-corporation/0603N102J500CT/9354974",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.1100"+    },+    {+      "mpn": "0603X475K100CT",+      "quantity": 1,+      "refs": "C7",+      "snapshot": "design/sourcing-2026-10-10/0603X475K100CT.json",+      "scope": "board",+      "status": "no-in-stock-delivery-recommendation"+    },+    {+      "mpn": "CL21A475KAQNNNG",+      "quantity": 1,+      "refs": "C6",+      "snapshot": "design/sourcing-2026-10-10/CL21A475KAQNNNG.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "187-CL21A475KAQNNNG",+      "stock": 413,+      "listingUnitUsd": "0.18",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Samsung-Electro-Mechanics/CL21A475KAQNNNG?qs=yOVawPpwOwnnyiHyGRHclw%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.18"+    },+    {+      "mpn": "CQ02WGF0000TCE",+      "quantity": 2,+      "refs": "R31 R32",+      "snapshot": "design/sourcing-2026-10-10/CQ02WGF0000TCE.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "303-CQ02WGF0000TCE",+      "stock": 180000,+      "listingUnitUsd": "0.001",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Royalohm/CQ02WGF0000TCE?qs=e8oIoAS2J1Rq2jIJuJwT7w%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "price-tier-unavailable-at-board-quantity",+      "priceTierQuantity": 10000,+      "priceTierUnitUsd": "0.001",+      "priceTierExtendedUsd": "10.00",+      "note": "Only a 10000-unit price tier was returned. min_order=1 does not establish a price for two pieces. Internal stock remains unverified."+    },+    {+      "mpn": "CR0402-FX-1001GLF",+      "quantity": 4,+      "refs": "R7 R20 R23 R27",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-1001GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-1001GLF",+      "stock": 504515,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-1001GLF?qs=URDPQ%2Fj0cz1OX9WbgKoV8w%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.40"+    },+    {+      "mpn": "CR0402-FX-1002GLF",+      "quantity": 12,+      "refs": "R1 R4 R11 R15 R16 R17 R18 R21 R25 R26 R28 R38",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-1002GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-1002GLF",+      "stock": 2318398,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-1002GLF?qs=URDPQ%2Fj0cz0Xgk2sZso66A%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "1.20"+    },+    {+      "mpn": "CR0402-FX-1003GLF",+      "quantity": 8,+      "refs": "R2 R3 R5 R6 R24 R33 R34 R37",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-1003GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-1003GLF",+      "stock": 819329,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-1003GLF?qs=URDPQ%2Fj0cz1ZruPSJQ7fsA%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.80"+    },+    {+      "mpn": "CR0402-FX-2203GLF",+      "quantity": 1,+      "refs": "R36",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-2203GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-2203GLF",+      "stock": 755617,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-2203GLF?qs=JflQ4L8so%2FtyEWw1LC5mKQ%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.10"+    },+    {+      "mpn": "CR0402-FX-3301GLF",+      "quantity": 1,+      "refs": "R19",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-3301GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-3301GLF",+      "stock": 1584034,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-3301GLF?qs=SFHnMgm9Isy3I7MOn5jnNA%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.10"+    },+    {+      "mpn": "CR0402-FX-3302GLF",+      "quantity": 1,+      "refs": "R22",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-3302GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-3302GLF",+      "stock": 90190,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-3302GLF?qs=SFHnMgm9Isze0zS5GpsQzw%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.10"+    },+    {+      "mpn": "CR0402-FX-4701GLF",+      "quantity": 4,+      "refs": "R13 R14 R29 R30",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-4701GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-4701GLF",+      "stock": 401448,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-4701GLF?qs=ePR1ZvdkOKK%252Bab9lx6TEtw%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.40"+    },+    {+      "mpn": "CR0402-FX-6803GLF",+      "quantity": 1,+      "refs": "R35",+      "snapshot": "design/sourcing-2026-10-10/CR0402-FX-6803GLF.json",+      "scope": "board",+      "vendor": "Mouser",+      "vendorPart": "652-CR0402FX-6803GLF",+      "stock": 308962,+      "listingUnitUsd": "0.10",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Bourns/CR0402-FX-6803GLF?qs=ePR1ZvdkOKJ9fHhjKJ%252BxsA%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.10"+    },+    {+      "mpn": "MachineContactMedium",+      "quantity": 7,+      "refs": "J1 J2 J3 J4 J5 J6 J7",+      "snapshot": "design/sourcing-2026-10-10/MachineContactMedium.json",+      "scope": "board",+      "status": "internal-catalog-item-needs-inventory-cost"+    },+    {+      "mpn": "MachinePinMediumShort",+      "quantity": 4,+      "refs": "MP1 MP2 MP3 MP4",+      "snapshot": "design/sourcing-2026-10-10/MachinePinMediumShort.json",+      "scope": "board",+      "status": "internal-catalog-item-needs-inventory-cost"+    },+    {+      "mpn": "M20-1060300",+      "quantity": 1,+      "refs": "FAN_HOUSING",+      "snapshot": "design/sourcing-2026-10-10/M20-1060300.json",+      "scope": "external",+      "vendor": "Mouser",+      "vendorPart": "855-M20-1060300",+      "stock": 8707,+      "listingUnitUsd": "0.15",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Harwin/M20-1060300?qs=Jph8NoUxIfWw8TD5O8shNw%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.15"+    },+    {+      "mpn": "M20-1060200",+      "quantity": 1,+      "refs": "SENSOR_HOUSING",+      "snapshot": "design/sourcing-2026-10-10/M20-1060200.json",+      "scope": "external",+      "vendor": "Mouser",+      "vendorPart": "855-M20-1060200",+      "stock": 7208,+      "listingUnitUsd": "0.13",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Harwin/M20-1060200?qs=vF78I%252BjhbY9eoc76pZt%252BlQ%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.13"+    },+    {+      "mpn": "M20-1180046",+      "quantity": 5,+      "refs": "FAN_CONTACTS SENSOR_CONTACTS",+      "snapshot": "design/sourcing-2026-10-10/M20-1180046.json",+      "scope": "external",+      "vendor": "Mouser",+      "vendorPart": "855-M20-1180046",+      "stock": 19556,+      "listingUnitUsd": "0.14",+      "productUrl": "https://www.mouser.com/en/ProductDetail/Harwin/M20-1180046?qs=pYcASEcTDE4tjBjrymC1ng%3D%3D",+      "minimumOrderQuantityVerified": false,+      "status": "exact-listing-not-quote",+      "indicativeExtendedUsd": "0.70"+    }+  ],+  "additionalIndicativeBoardUsd": "5.4200",+  "additionalIndicativeHarnessUsd": "0.98",+  "note": "Listing quantities, order minima, stock reservation, landed cost and internal inventory not confirmed; formal BOM pricing not overwritten."+}
docs/runs/board-codex-20261007-1749/thermal-1-review-document-4.jsonadded+98
@@ -0,0 +1,98 @@+{+  "status": "nominal-layout-study-not-fabrication",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "sinkHangers": [+    [+      119.586,+      48.06800000000001+    ],+    [+      119.586,+      86.168+    ],+    [+      157.68599999999998,+      86.168+    ]+  ],+  "omittedSinkHole": [+    157.68599999999998,+    48.06800000000001+  ],+  "fanHolePitchMm": 32,+  "fanClearanceDrillMm": 4.5,+  "fanRotationDegrees": 45,+  "fanHoleCenters": [+    [+      138.636,+      44.49058300203049+    ],+    [+      116.00858300203048,+      67.11800000000001+    ],+    [+      161.2634169979695,+      67.11800000000001+    ],+    [+      138.636,+      89.74541699796953+    ]+  ],+  "minSinkCountersinkToFanHoleEdgeMm": 13.932992864296285,+  "ringBottomAboveBoardMm": 37.84,+  "fanBodyTopAboveBoardMm": 59.84,+  "bodyConflicts": [],+  "probeConflicts": [],+  "nutEnvelopeChecks": [+    {+      "x": 119.586,+      "y": 48.06800000000001,+      "assumedNutRadiusMm": 3.2,+      "assumedNutHeightMm": 1.8,+      "bodyConflicts": [],+      "used": true+    },+    {+      "x": 157.68599999999998,+      "y": 48.06800000000001,+      "assumedNutRadiusMm": 3.2,+      "assumedNutHeightMm": 1.8,+      "bodyConflicts": [+        "J8"+      ],+      "used": false+    },+    {+      "x": 119.586,+      "y": 86.168,+      "assumedNutRadiusMm": 3.2,+      "assumedNutHeightMm": 1.8,+      "bodyConflicts": [],+      "used": true+    },+    {+      "x": 157.68599999999998,+      "y": 86.168,+      "assumedNutRadiusMm": 3.2,+      "assumedNutHeightMm": 1.8,+      "bodyConflicts": [],+      "used": true+    }+  ],+  "validCarrierSolids": true,+  "sources": [+    "https://wakefieldthermal.com/content/data_sheets/677.pdf",+    "https://www.sunon.com/PROSEARCH_FILES/%28D04114960G-01%29-1.pdf"+  ],+  "limitations": [+    "Sink is a translucent clearance envelope, not manufacturer fin geometry.",+    "Fan is the MIT Adom nominal model: illustrative rotor, no wires, exact G99 connector, guard or motion states in this study.",+    "Split edge clamps need tolerances, retention fasteners, insulation material and load/creep validation.",+    "Hanger screw length, countersink seating, nuts and tool access remain unselected; cylindrical nut envelope is only a screen. Plate opening/web strength not qualified.",+    "No case TIM/clamp or case sensor mounting is modeled.",+    "Fan direction, plenum pressure losses and airflow remain unqualified.",+    "No PCB drilling or electrical design changes. No release or thermal acceptance."+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-review-document-5.jsonadded+97
@@ -0,0 +1,97 @@+{+  "status": "REVIEW_ONLY_NOT_FOR_FABRICATION",+  "boardSha256": "1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4",+  "nativeVersion": "10.0.5",+  "copperLayers": 2,+  "drills": {+    "PTH": {+      "count": 332,+      "slots": 4,+      "centersAndToolDiametersMatch": true+    },+    "NPTH": {+      "count": 3,+      "slots": 0,+      "centersAndToolDiametersMatch": true+    }+  },+  "placements": {+    "count": 91,+    "positionsAndRotationsMatch": true,+    "frame": "KiCad absolute XY, Y negated; mm"+  },+  "limitations": [+    "Thermal gate, mechanical retention, installed airflow and hardware fault qualification remain open.",+    "Native job uses default 1.51 mm dielectric plus two 0.01 mm masks; analysis spec uses 1.53 mm dielectric without masks. Fabrication stack requires explicit reconciliation.",+    "Gerber job reports 64.05 x 72.05 mm including the 0.05 mm profile stroke; board centerline outline is 64 x 72 mm.",+    "BOM includes test points and stock interfaces; procurement cost and assembly filtering remain incomplete.",+    "Checks verify drill centers/tool diameters and placement coordinates, not complete CAM/DFM, slot length, solder paste or manufacturing acceptance."+  ],+  "files": [+    {+      "path": "bom-review.csv",+      "bytes": 15082,+      "sha256": "8ad846c2d368f60d6cdd7c3712d2b01e6bddfde1c1b8648bb053200d0b04e4d8"+    },+    {+      "path": "drill/adom-custom-electronic-load-NPTH.drl",+      "bytes": 456,+      "sha256": "4ff6680e5975ffa4d181362ebd1876e736bfb7a917369691d32a505b5f6d2029"+    },+    {+      "path": "drill/adom-custom-electronic-load-PTH.drl",+      "bytes": 5644,+      "sha256": "300d347cb22f1d1ba8e51a1c694fb4ad29df3a6373eba99c5c80a120c46029aa"+    },+    {+      "path": "drill/drill-report.txt",+      "bytes": 1054,+      "sha256": "03385df4be51bf8d94744b50377e84ce5995193ce5b464011e5db7ddb8c27325"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-B_Cu.gbl",+      "bytes": 312733,+      "sha256": "f1f5db3cc2b0c0c9d90ddaadb07749555d099424a9f09a8a9fb11e8964a49a1e"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-B_Mask.gbs",+      "bytes": 2075,+      "sha256": "7c16d03b0c13c8e4791543180552bc28354abd04c8130bd9d291eb8cbf0a1b9a"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-B_Silkscreen.gbo",+      "bytes": 2087,+      "sha256": "9c411933019d20f0bbd4c67937f327125f765e028f64abd1c15c56597eaba80a"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-Edge_Cuts.gm1",+      "bytes": 1051,+      "sha256": "d764483b47a1993b2894d217551627ef6284ce984e2400a85df90985fb0215d6"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-F_Cu.gtl",+      "bytes": 420254,+      "sha256": "56afa9fb5dcb53d7fe55a65803df1a3f4713a0aa663b227788cc664b62f2a937"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-F_Mask.gts",+      "bytes": 14319,+      "sha256": "41d7ebba34c8b22372b191440a7ff4c24c83cfe1eb9b08e7485ed98781a66fbc"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-F_Silkscreen.gto",+      "bytes": 184609,+      "sha256": "6d3090a71f87bfc02751646fa28d3273fa6fea7a9845b55f7e9836657519865d"+    },+    {+      "path": "gerbers/adom-custom-electronic-load-job.gbrjob",+      "bytes": 2705,+      "sha256": "f1b337e6d97488a9a67653cf0de4e0017508b720d448d3b519ecb00dcb6c75d0"+    },+    {+      "path": "positions.csv",+      "bytes": 6703,+      "sha256": "a85a303df408f5cc781332135ef665740a913562daa85baf4cdbe73d6e081e1d"+    }+  ]+}
docs/runs/board-codex-20261007-1749/thermal-1-review-video-3.mp4added
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-review-video-7.mp4added
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-sheet.pngadded
⋯ 1 unchanged line ⋯
docs/runs/board-codex-20261007-1749/thermal-1-thermal-study-2.mdadded+15
@@ -0,0 +1,15 @@+# Package cooling sensitivity, v85++The coupled study now routes Q1's complete 5.5 W through separate junction, case and sink nodes and three explicit physical-pad links. It retains D1/RSH1 heat and PCB Joule losses. This is an **unqualified parameter study**, not a replacement for the formal thermal gate.++At 40 °C ambient, the 0.1 mm run gives Q1 case temperatures of **75.6 °C still air** and **51.1 °C with assumed forced cooling**. The junction is 77.9/53.4 °C. Full-power still air exceeds the 55 °C case ceiling. The 0.2 mm sensitivity runs vary each case-to-pad resistance from 10 to 1000 K/W; the forced-case result stays near 51.1 °C. This does not remove uncertainty in installed airflow or interface pressure.++Inputs: junction-to-case 0.42 K/W; case-to-sink 0.5273 K/W, including assumed spreading; catalog-condition sink-to-air values 6/1.5 K/W. The latter forced rating is at 400 LFM, which the installed fan/duct has not demonstrated. Lead resistances are explicitly assumed. The maximum package energy imbalance in the fine run is below 3 nanowatts; numerical balance is not physical model validation.++[Reproducible summary](../checkpoints/package-cooling-v85/summary.json), [fine report](../checkpoints/package-cooling-v85/fields-100k-0p1/fields.json), [fine input](../checkpoints/package-cooling-v85/spec-100k.json), [review clip](clips/package-cooling-review.mp4).++Run `PYTHONNOUSERSITE=1 /usr/bin/python3 tools/package_cooling_review.py` to regenerate the summary and plot from the saved results. This avoids the workspace user-site NumPy/matplotlib ABI mismatch without changing installed packages.++The solver is a private combined build containing the pending actual-layer/physical-terminal stack plus new package nodes. [Fields PR #11](https://wiki.adom.inc/adom/adom-fields/prs/11) offers the package feature against Fields 0.7.7: 20 tests, production check, release build, analytical CLI fixture and isolated viewer inspection pass. Owner review, merge and deployment remain separate; the shared runtime was not replaced.++The PCB remains exactly `1681eb90e49f4f229afe89bb75ff1738b7503907a52cd174e8b3d64b120082f4`. Formal current passes. Thermal remains open until the physical interface/support/airflow and fault behavior are justified. No manufacturing release or hardware qualification is claimed.
docs/runs/board-codex-20261007-1749/thermal-1.mp4added
⋯ 1 unchanged line ⋯