Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1866.6 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1872.5 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 175.0 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1866.6** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 180.9 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1872.5** | | |  ## Per step @@ -44,7 +44,7 @@ AI time only, the idle cut out. | placement | 9.5 | 0.0 | 9.5 | 31 | 5 | 3 | 0.0 min | | routing | 63.4 | 0.0 | 63.4 | 92 | 7 | 2 | 0.0 min | | pours | 5.8 | 0.0 | 5.8 | 22 | 3 | 0 | 0.0 min |-| current | 78.1 | 0.0 | 78.1 | 123 | 2 | 0 | 0.0 min |+| current | 78.1 | 0.0 | 78.1 | 126 | 3 | 0 | 0.0 min | | thermal | 89.0 | 0.0 | 89.0 | 350 | 2 | 0 | 0.0 min | | finish | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min | | 3d | 1.2 | 0.0 | 1.2 | 2 | 1 | 0 | 0.0 min |@@ -55,12 +55,12 @@ AI time only, the idle cut out. | libraries | 3.8 | 0.0 | 3.8 | 18 | 2 | 0 | 0.0 min | | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min | | nets | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min |-| outline | 0.4 | 0.0 | 0.4 | 5 | 3 | 0 | 0.0 min |-| rules | 1488.8 | 0.0 | 1488.8 | 14 | 1 | 0 | 0.0 min |+| outline | 1.6 | 0.0 | 1.6 | 10 | 3 | 0 | 0.0 min |+| rules | 1493.5 | 0.0 | 1493.5 | 14 | 1 | 0 | 0.0 min | | silkscreen | 0.7 | 0.0 | 0.7 | 3 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min | | thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |-| **total** | **1866.6** | **0.3** | **1866.2** | | | | |+| **total** | **1872.5** | **0.3** | **1872.1** | | | | |  ## Returns to earlier steps @@ -223,6 +223,8 @@ AI time only, the idle cut out. - 2026-10-13T05:22:54Z net LOAD_POS: 60 items highlighted - 2026-10-13T05:22:58Z net SHUNT_P: 23 items highlighted - 2026-10-13T05:23:56Z clip-start:outline-3+- 2026-10-13T05:28:35Z capture-stop+- 2026-10-13T05:29:54Z clip-start:current-3  ## Where the board stands @@ -1021,12 +1023,30 @@ What this step does: Round the board's corners: every sharp outline corner becom  Why the AI came back here: Existing Board34 pours verified and copper measured; check current rounded outline -**Clip: outline, visit 3, still recording (started 2026-10-13T05:23:56Z); it appears here when the step ends.**+**Clip: outline, visit 3, the PCB editor from 2026-10-13T05:23:56Z to 2026-10-13T05:28:35Z. Motion only: 4.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/outline-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the outline, visit 3 clip, what the camera saw.**++![nine frames of outline, visit 3](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/outline-3-sheet.png)  **Screenshot: the board when outline, visit 3 began.**  ![the board when outline, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-outline-3-start.png) +### current, visit 3++What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged++Why the AI came back here: Verified existing rounded Board34 outline; zero geometry changes.++**Clip: current, visit 3, still recording (started 2026-10-13T05:29:54Z); it appears here when the step ends.**++**Screenshot: the board when current, visit 3 began.**++![the board when current, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-current-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.@@ -1036,7 +1056,7 @@ Percent of each plan limit used, as the provider reports it, at the start of the | claude | 5h | 17 % | 18 % | 1.0 % | | claude | Fable | 0 % | 0 % | 0.0 % | | claude | week | 54 % | 25 % | -29.0 % |-| codex | week | 2 % | 1 % | -1.0 % |+| codex | week | 2 % | 2 % | 0.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*