Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `routing`, 93.4 min of AI time since the prompt (1226.5 min on the wall clock). This page updates at every step change.+**Running**: step `placement`, 117.3 min of AI time since the prompt (1250.4 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -13,8 +13,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 1 | 2026-10-07T17:49:14Z | (open) | 46.0 | 1019 | the first prompt | | 2 | 2026-10-08T11:34:31Z | (open) | 9.9 | 114 | User resumed custom electronic load work and reiterated recording clips for a YouTube buil | | 3 | 2026-10-08T13:38:16Z | (open) | 21.6 | 0 | Continue load design with fan tach and Kelvin-minus probe access; retain two-layer 3rdPart |-| 4 | 2026-10-08T13:59:54Z | (open) | 15.8 | 0 | Continue through remaining library, cooling, routing and recorded build work |-| **all** | | | **93.4** | | |+| 4 | 2026-10-08T13:59:54Z | (open) | 39.7 | 0 | Continue through remaining library, cooling, routing and recorded build work |+| **all** | | | **117.3** | | |  ## Per step @@ -23,15 +23,19 @@ AI time only, the idle cut out. | Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think | |---|---|---|---|---|---|---|---| | intake | 2.6 | 0.3 | 2.2 | 3 | 1 | 0 | 0.3 min |-| placement | 1.1 | 0.0 | 1.1 | 4 | 1 | 0 | 0.0 min |-| routing | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| placement | 1.1 | 0.0 | 1.1 | 5 | 2 | 1 | 0.0 min |+| routing | 6.5 | 0.0 | 6.5 | 6 | 1 | 0 | 0.0 min | | components | 11.9 | 0.0 | 11.9 | 28 | 1 | 0 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min | | models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min |-| rules | 73.2 | 0.0 | 73.2 | 14 | 1 | 0 | 0.0 min |+| rules | 90.6 | 0.0 | 90.6 | 14 | 1 | 0 | 0.0 min | | test-plan | 0.1 | 0.0 | 0.1 | 5 | 1 | 0 | 0.0 min |-| **total** | **93.4** | **0.3** | **93.1** | | | | |+| **total** | **117.3** | **0.3** | **117.0** | | | | |++## Returns to earlier steps++- 2026-10-08T14:37:07Z back to **placement** (visit 2): Compact BOOST_SW loop and orient precision sense pins toward the shunt before routing  ## Decisions along the way @@ -44,9 +48,12 @@ AI time only, the idle cut out. - 2026-10-08T14:06:02Z clip-start:test-plan-1 - 2026-10-08T14:07:02Z clip-start:placement-1 - 2026-10-08T14:10:02Z capture-stop+- 2026-10-08T14:39:33Z clip-start:placement-2  ## Where the board stands +- routing: 4 unrouted after null passes+- gate: 17 new DRC errors, 14 unconnected, null inherited  ## The steps on camera @@ -136,7 +143,29 @@ What this step does: place the parts for routability, current and heat; the bina  What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai -**Clip: routing, still recording (started 2026-10-08T14:15:43Z); it appears here when the step ends.**+**Clip: routing, the PCB editor from 2026-10-08T14:15:43Z to 2026-10-08T14:37:15Z. Motion only: 21.4 min of real time, 68 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/routing-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the routing clip, what the camera saw.**++![nine frames of routing](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/routing-1-sheet.png)++**Screenshot: the board when routing ended.**++![the board when routing ended](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-routing-1-end.png)++### placement, visit 2 (rework)++What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here++Why the AI came back here: Compact BOOST_SW loop and orient precision sense pins toward the shunt before routing++**Clip: placement, visit 2 (rework), still recording (started 2026-10-08T14:39:33Z); it appears here when the step ends.**++**Screenshot: the board when placement, visit 2 (rework) began.**++![the board when placement, visit 2 (rework) began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-placement-2-start.png)  ## Plan usage, the second cost line @@ -144,9 +173,9 @@ Percent of each plan limit used, as the provider reports it, at the start of the  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 7 % | -10.0 % |+| claude | 5h | 17 % | 8 % | -9.0 % | | claude | Fable | 0 % | 3 % | 3.0 % |-| claude | week | 54 % | 62 % | 8.0 % |+| claude | week | 54 % | 63 % | 9.0 % | | codex | week | 2 % | 10 % | 8.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*