Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1874.2 min of AI time from the prompt; the video is being cut.+**Finished** (board design checks) at 2026-10-12T14:00:25Z, 1892.9 min of AI time from the prompt; the video is being cut.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -31,8 +31,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 19 | 2026-10-12T09:39:33Z | 2026-10-12T10:08:30Z | 28.9 | 0 | keep going | | 20 | 2026-10-12T10:08:30Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 21 | 2026-10-12T10:34:04Z | (open) | 0.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 22 | 2026-10-12T10:34:05Z | (open) | 182.6 | 955 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |-| **all** | | | **1874.2** | | |+| 22 | 2026-10-12T10:34:05Z | (open) | 201.4 | 1074 | User confirmed 1 oz finished copper standard, 2 oz on request. Finish board AIFlow design  |+| **all** | | | **1892.9** | | |  ## Per step @@ -45,22 +45,22 @@ AI time only, the idle cut out. | routing | 63.4 | 0.0 | 63.4 | 92 | 7 | 2 | 0.0 min | | pours | 5.8 | 0.0 | 5.8 | 22 | 3 | 0 | 0.0 min | | current | 78.5 | 0.0 | 78.5 | 129 | 3 | 0 | 0.0 min |-| thermal | 89.0 | 0.0 | 89.0 | 351 | 3 | 0 | 0.0 min |+| thermal | 99.3 | 0.0 | 99.3 | 367 | 3 | 0 | 0.0 min | | finish | 0.8 | 0.0 | 0.8 | 2 | 1 | 0 | 0.0 min | | 3d | 1.2 | 0.0 | 1.2 | 2 | 1 | 0 | 0.0 min | | components | 66.3 | 0.0 | 66.3 | 386 | 2 | 1 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | export | 0.6 | 0.0 | 0.6 | 7 | 1 | 0 | 0.0 min |-| fields | 7.0 | 0.0 | 7.0 | 4 | 1 | 0 | 0.0 min |+| fields | 7.0 | 0.0 | 7.0 | 5 | 2 | 0 | 0.0 min | | libraries | 3.8 | 0.0 | 3.8 | 18 | 2 | 0 | 0.0 min | | models | 15.3 | 0.0 | 15.3 | 30 | 2 | 0 | 0.0 min | | nets | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min | | outline | 1.6 | 0.0 | 1.6 | 10 | 3 | 0 | 0.0 min |-| rules | 1494.8 | 0.0 | 1494.8 | 14 | 1 | 0 | 0.0 min |+| rules | 1503.3 | 0.0 | 1503.3 | 14 | 1 | 0 | 0.0 min | | silkscreen | 0.7 | 0.0 | 0.7 | 3 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 10 | 2 | 0 | 0.0 min | | thermal-vias | 29.3 | 0.0 | 29.3 | 204 | 6 | 0 | 0.0 min |-| **total** | **1874.2** | **0.3** | **1873.8** | | | | |+| **total** | **1892.9** | **0.3** | **1892.6** | | | | |  ## Returns to earlier steps @@ -229,6 +229,9 @@ AI time only, the idle cut out. - 2026-10-13T05:30:50Z net LOAD_POS: 60 items highlighted - 2026-10-13T05:30:54Z net SHUNT_P: 23 items highlighted - 2026-10-13T05:31:32Z clip-start:thermal-3+- 2026-10-13T05:33:07Z capture-stop+- 2026-10-13T06:12:36Z artifact probing-collision-review for thermal-3: Board34 R9: full modeled route passes, 20 touches, 14528 poses, zero collisions/snags. Wire wear and thermal qualification remain open.+- 2026-10-13T07:03:17Z artifact analysis-image for thermal-3: Unadopted passive cooling sensitivity. Nominal calculation passes; +10 percent sink resistance fails the unchanged package-rise screen. No installed thermal acceptance.  ## Where the board stands @@ -238,6 +241,7 @@ AI time only, the idle cut out. - pours (verified-existing): 9 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":5808.49,"F.Cu":5530.47} - analyze-current: pass+- analyze-thermal: pass  ## The steps on camera @@ -1067,22 +1071,34 @@ What this step does: copper and vias at every hot tab against the rise budget; t  Why the AI came back here: Board34 exact-spec current screen and native net walkthrough passed; cooling assembly acceptance remains open. -**Clip: thermal, visit 3, still recording (started 2026-10-13T05:31:32Z); it appears here when the step ends.**+**Clip: thermal, visit 3, the PCB editor from 2026-10-13T05:31:32Z to 2026-10-13T05:33:07Z. Motion only: 1.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 3 clip, what the camera saw.**++![nine frames of thermal, visit 3](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-3-sheet.png)  **Screenshot: the board when thermal, visit 3 began.**  ![the board when thermal, visit 3 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-thermal-3-start.png) +**The AI's file: Board34 R9: full modeled route passes, 20 touches, 14528 poses, zero collisions/snags. Wire wear and thermal qualification remain open.** [thermal-3-probing-collision-review-0.json](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-3-probing-collision-review-0.json)++**The AI's drawing: Unadopted passive cooling sensitivity. Nominal calculation passes; +10 percent sink resistance fails the unchanged package-rise screen. No installed thermal acceptance.**++![Unadopted passive cooling sensitivity. Nominal calculation passes; +10 percent sink resistance fails the unchanged package-rise screen. No installed thermal acceptance.](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/thermal-3-analysis-image-1.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 18 % | 1.0 % |+| claude | 5h | 17 % | 6 % | -11.0 % | | claude | Fable | 0 % | 0 % | 0.0 % |-| claude | week | 54 % | 25 % | -29.0 % |-| codex | week | 2 % | 2 % | 0.0 % |+| claude | week | 54 % | 27 % | -27.0 % |+| codex | week | 2 % | 7 % | 5.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.* 

@@ -0,0 +1,119 @@+{+  "board_top_mm": 5.565,+  "bodies": [+    {+      "anchor": "module",+      "name": "probe module",+      "points": 4956780+    },+    {+      "anchor": "module",+      "name": "pogo barrel",+      "points": 1004+    },+    {+      "anchor": "plunger",+      "name": "pogo plunger",+      "points": 292+    },+    {+      "anchor": "pincer",+      "name": "pincer module",+      "points": 4610241+    },+    {+      "anchor": "jaw",+      "name": "pincer jaw moving",+      "points": 994991+    }+  ],+  "closest": [+    {+      "body": "pincer module",+      "gap_mm": 93.84,+      "part": "a board part at (-35.0, 45.0)",+      "t": 16.46+    },+    {+      "body": "pincer jaw moving",+      "gap_mm": 38.82,+      "part": "a board part at (-48.0, 32.5)",+      "t": 172.54+    },+    {+      "body": "probe module",+      "gap_mm": 9.42,+      "part": "a board part at (-35.0, 45.0)",+      "t": 172.96+    }+  ],+  "collisions": [],+  "dt_s": 0.02,+  "inputIdentity": {+    "access": {+      "path": "probing-preview-r9/probing-flow/access.json",+      "sha256": "0ff02c98bdf58c6ec04c884950ae023e1e90705033b09b8d672327c21c710f68"+    },+    "board": {+      "path": "/home/adom/project/adom-custom-electronic-load/probing-flow/design-candidate/sidefan-dft-r23.kicad_pcb",+      "sha256": "74f8ac20cba6b95db26c40f5369156efec80cb80e35388fe064f6891ff78ff11"+    },+    "decodedAssembly": {+      "path": "/home/adom/project/adom-custom-electronic-load/mechanical/side-fan-r9/side-fan-assembly.plain.glb",+      "sha256": "3820cb7ea1951d1abc8e66c3d841bfa343b1918d2ae0de6b3d5ad8d90dc7cff8"+    },+    "glb": {+      "path": "/home/adom/project/adom-custom-electronic-load/mechanical/side-fan-r9/side-fan-assembly.glb",+      "sha256": "81a25673a6258f34d89a49081e83ac8a2b4292976faad9f70406622002cd273d"+    },+    "head:pincer-jaw-moving": {+      "path": "/home/adom/project/load-probing-20261012/twin/v2/pincer-jaw-moving/medium.glb",+      "sha256": "878327978fcc1187136d465ff154976c02faf0ad657fabb8ec7d0b673bdc25da"+    },+    "head:pincer-module": {+      "path": "/home/adom/project/load-probing-20261012/twin/v2/pincer-module/medium.glb",+      "sha256": "8074d36f3ae76432f078ebbd21aa37f2c250beb4a4f4567ce957a8667c1ab5da"+    },+    "head:pogo-barrel": {+      "path": "/home/adom/project/load-probing-20261012/twin/v2/pogo-barrel/medium.glb",+      "sha256": "5fe8ef0b97ed93240487d478c27fd29d4e4dcc2206534e05dfb2de245d82d94b"+    },+    "head:pogo-plunger": {+      "path": "/home/adom/project/load-probing-20261012/twin/v2/pogo-plunger/medium.glb",+      "sha256": "f719802f648b10cd9acefbe3f895ffae20955945fac5cb07f576661ffbaebf33"+    },+    "head:probe-module": {+      "path": "/home/adom/project/load-probing-20261012/twin/v2/probe-module/medium.glb",+      "sha256": "d927438999c0b305d0a05e645261f3010978778f91312e5e09ca25a3b5dff5c8"+    },+    "layout": {+      "path": "probing-preview-r9/probing-flow/layout.json",+      "sha256": "37b719d1c2922fe2c173e810dd24a0ed59f7f93d3d68b122b23922394127d23c"+    },+    "sequence": {+      "path": "probing-preview-r9/probing-flow/sequence.json",+      "sha256": "296c16143df224a31069444db43521ec0193906eb33dd555cc07399a51c5cb26"+    },+    "workcell": {+      "path": "probing-preview-r9/probing-flow/workcell.json",+      "sha256": "f56cfe0557906c0f136f8524dfb0f265d632f993971274c5ddbf12821bbe6e75"+    }+  },+  "panel_wires": 4,+  "part_shapes": "triangles (0.25 mm columns)",+  "parts": 365,+  "problems": [],+  "summary": "collisions over 221.5 s of the run (14528 poses, the head's real surface vs 365 parts at their real shapes, 4 panel wires and the seated ground pin): 0 collision episode(s); ground wire: 721 solves, 0 snag(s)",+  "tether": {+    "rests_on": [+      {+        "from_s": 38.75,+        "part": "a board part at (-35.0, 45.0)",+        "to_s": 184.75+      }+    ],+    "snags": [],+    "solves": 721,+    "worst_clearance_mm": -0.0+  }+}