← Commit history
build/stm32-thermal-bound/build-manifest.jsonadded+1192
@@ -0,0 +1,1192 @@+{+  "status": "compiled-only-output-locked",+  "flashed": false,+  "physical_usb_verified": false,+  "load_enable_supported": false,+  "production_boot_freshness": false,+  "lab_boot_id": "lab20261012thermalbound",+  "vid": 51966,+  "pid": 16385,+  "toolchain": "arm-none-eabi-gcc (15:13.2.rel1-2) 13.2.1 20231009",+  "dependencies": {+    "tinyusb": {+      "commit": "5f3d88cdbe87ede4fcaddc6a095dcf2edb100f65",+      "url": "https://github.com/hathach/tinyusb.git"+    },+    "cmsis_device_g0": {+      "commit": "f484fe852535f913a02ee79787eafa74dd7f9488",+      "url": "https://github.com/STMicroelectronics/cmsis_device_g0.git"+    },+    "stm32g0xx_hal_driver": {+      "commit": "a248a9e484d58943b46c68f6c49b4b276778bd59",+      "url": "https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git"+    },+    "CMSIS_5": {+      "commit": "2b7495b8535bdcb306dac29b9ded4cfb679d7e5c",+      "url": "https://github.com/ARM-software/CMSIS_5.git"+    }+  },+  "sources": {+    "firmware/adc_conversion.c": "b399512f5de4ce0452f6a93ad64cdfebc65a88dc8260703b4a1106a667b6dfce",+    "firmware/adc_conversion.h": "dcaa7b969111978f35d63b4ec4c6ed9f151bd16fa4b7744f7de114fe36414d9e",+    "firmware/fan_tach.c": "844f00c1f77e39529bd8f667d543ecee187ff4fe91108aedb7a2c36eb22846fa",+    "firmware/fan_tach.h": "20fc7b0bbb1a040dfd0453e3af22cf62e7a564241c28cf9cd08dd9b6d87ddf80",+    "firmware/instruments.c": "8d14877861dc04ea88c21e2047df81dc6291e340783515c36bf417c32763b995",+    "firmware/instruments.h": "47756a2358e94e143b01bc1f99e5987b9fd8a01d81d762b0b490e96cebeb3151",+    "firmware/load_core.c": "9c97218669b56af3428e8ae02155773123657307761dd293b06fa408168605a6",+    "firmware/load_core.h": "f63b19949bd3a0d9f4ce1b28f47512d82b1dcd6016658ea7a626b5eb1c2bc7ca",+    "firmware/load_protocol.c": "5ad98277a7012ad21f0aa91cc22064c39fbc82d5f8756286fb10ecc5e585cc14",+    "firmware/load_protocol.h": "f64f6b689d57501031515e8ee9f8c8349a2cea63738e73db16f95e747caf91fb",+    "firmware/measurement_cache.c": "5f2c1cee84c5118b7647e1b833924673b132c4d76a95b790671d2747209b9733",+    "firmware/measurement_cache.h": "5de6ed33032a25f3a1b80331461b6ad43aa26374d18c03d4e458f13036694262",+    "firmware/ntcle428.c": "66ee0c787b4b689547ec635b045b5e9f0d5d30bc2c672e22ff31d65f11a5caa8",+    "firmware/ntcle428.h": "e51e30dae5eee4a8d0056e48872f5cf18016433ef9c146b478f05b6e92b5e3d8",+    "firmware/stm32/README.md": "c4f04fe11ebe158402a41a356c96ff643b774e46223cfbc802793152d751c4d7",+    "firmware/stm32/adc_input.c": "72f18414e5db99a90ca815ba7da9cf0414b0b58479c772de6cfbb0f509b0e0bb",+    "firmware/stm32/adc_input.h": "c39b651e4140b05f0693d3c2681cb15cf437395953f7b24db0d5e210b260450d",+    "firmware/stm32/clock.c": "f42f5c1ff229b065a048218ecc575624276aaa229e0bc340d80c80eec35416d2",+    "firmware/stm32/dependencies.json": "7e8f3c17a59c856371a9f411dce6a9dadafbb8c8edd5ede5e4e5cf46b1567e92",+    "firmware/stm32/fan_input.c": "d4ebe5572dbbcd1a3ea84c4e31442732a7237e94d554ec8acdc07142486e92f8",+    "firmware/stm32/fan_input.h": "6dc99727c0e3aa5f711cdfd00b4c53d7bf123ad6698bbe842a64ec6b7d87e77b",+    "firmware/stm32/instrument_input.c": "26f7269d956387b9a44328802fccdd60b4d4fd18e5eeaaa8e0db2621e4a8a35a",+    "firmware/stm32/instrument_input.h": "e50485f7725a47ac807758901acd79dd41bff27331d54d10714a62225da4ea05",+    "firmware/stm32/licenses/CMSIS_5-LICENSE.txt": "b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1",+    "firmware/stm32/licenses/cmsis_device_g0-LICENSE.txt": "c71d239df91726fc519c6eb72d318ec65820627232b2f796219e87dcf35d0ab4",+    "firmware/stm32/licenses/stm32g0xx_hal_driver-LICENSE.txt": "3564c849dfd5e628732afb7933ccb1c983b53f7ac6bb237b6177691339082671",+    "firmware/stm32/licenses/tinyusb-LICENSE.txt": "b01185698f530f4f61b28f42d5a4d6bbe7834bde6a63f00773235628a7bdce22",+    "firmware/stm32/main.c": "c3845bdb2ff6e15cc2b82b00075b8d815cb23095b8f26aeaedc02af7b5980ad6",+    "firmware/stm32/stm32g0b1kc.ld": "1c938076e760300379115ee955589434dba7b84d1bb945dd41cf39abd342fd13",+    "firmware/stm32/stm32g0xx_hal_conf.h": "bda0dc6b6c88d0b1b0e621d3ac39e035fa46f363f256654f2a338c04ba821321",+    "firmware/stm32/syscalls.c": "bbfcedecfe5f33380424ab90cdb89c842c6a5717e01298a29ec43aef24c1524d",+    "firmware/stm32/tusb_config.h": "dfbb343cc609aa2693058b7d7e6e6c487524222cbe3eab5296568eca0b7d3970",+    "firmware/stm32/usb_descriptors.c": "ed2666d7115f05a07088dd92ebf35a600aadd8d9878fae2eb7635201b8f0b2a9",+    "tools/build_stm32_bringup.py": "93ba73323526db92b01baf38c0ecd8342261af87d9739603960d652cde1d6d2e"+  },+  "artifacts": {+    "adom-load-bringup.hex": "01beef1702cea0c9ef9a2dcd31786bd7ea665461e0409b988b7c30ec81608b73",+    "adom-load-bringup.bin": "2b047d38d239007800d693293d939a050602a9a62c5282a3a3b1acd6a0e1cab3",+    "adom-load-bringup.map": "f56d1e620554294db08b3beb233ff3989af36ecbc97ca695889d3f45743cd094",+    "adom-load-bringup.elf": "bd6e33fbc1c2d583434f3792bff16fecdfba8f53b0eb059dafc9d0d53d2d8b92"+  },+  "commands": [+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/load_core.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/00-load_core.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/adc_conversion.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/01-adc_conversion.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/ntcle428.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/02-ntcle428.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/adc_input.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/03-adc_input.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/instruments.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/04-instruments.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/measurement_cache.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/05-measurement_cache.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/instrument_input.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/06-instrument_input.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/load_protocol.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/07-load_protocol.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/fan_tach.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/08-fan_tach.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/fan_input.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/09-fan_input.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/main.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/10-main.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/clock.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/11-clock.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/usb_descriptors.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/12-usb_descriptors.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-std=c11",+      "-Werror",+      "-c",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/syscalls.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/13-syscalls.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/tusb.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/14-tusb.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/common/tusb_fifo.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/15-tusb_fifo.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/device/usbd.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/16-usbd.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/class/cdc/cdc_device.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/17-cdc_device.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/18-dcd_stm32_fsdev.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/src/portable/st/stm32_fsdev/fsdev_common.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/19-fsdev_common.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/20-stm32g0xx_hal.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_cortex.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/21-stm32g0xx_hal_cortex.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_pwr.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/22-stm32g0xx_hal_pwr.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_pwr_ex.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/23-stm32g0xx_hal_pwr_ex.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_rcc.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/24-stm32g0xx_hal_rcc.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_rcc_ex.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/25-stm32g0xx_hal_rcc_ex.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_gpio.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/26-stm32g0xx_hal_gpio.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_i2c.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/27-stm32g0xx_hal_i2c.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_i2c_ex.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/28-stm32g0xx_hal_i2c_ex.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_dma.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/29-stm32g0xx_hal_dma.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_adc.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/30-stm32g0xx_hal_adc.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Src/stm32g0xx_hal_adc_ex.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/31-stm32g0xx_hal_adc_ex.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Source/Templates/system_stm32g0xx.c",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/32-system_stm32g0xx.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-Os",+      "-g3",+      "-ffunction-sections",+      "-fdata-sections",+      "-fno-common",+      "-fstack-usage",+      "-Wall",+      "-Wextra",+      "-DSTM32G0B1xx",+      "-DUSE_HAL_DRIVER",+      "-DADOM_BRINGUP_OUTPUT_LOCK=1",+      "-DADOM_USB_VID=51966",+      "-DADOM_USB_PID=16385",+      "-DADOM_LAB_BOOT_ID=\"lab20261012thermalbound\"",+      "-I/home/adom/project/adom-custom-electronic-load/firmware",+      "-I/home/adom/project/adom-custom-electronic-load/firmware/stm32",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/src",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/lib/CMSIS_5/CMSIS/Core/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Include",+      "-I/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/stm32g0xx_hal_driver/Inc",+      "-I/home/adom/project/adom-load-firmware-toolchain/root/usr/include/newlib",+      "-c",+      "/home/adom/project/adom-load-firmware-deps/tinyusb/hw/mcu/st/cmsis_device_g0/Source/Templates/gcc/startup_stm32g0b1xx.s",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/33-startup_stm32g0b1xx.o"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-gcc",+      "-mcpu=cortex-m0plus",+      "-mthumb",+      "-nostartfiles",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/00-load_core.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/01-adc_conversion.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/02-ntcle428.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/03-adc_input.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/04-instruments.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/05-measurement_cache.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/06-instrument_input.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/07-load_protocol.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/08-fan_tach.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/09-fan_input.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/10-main.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/11-clock.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/12-usb_descriptors.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/13-syscalls.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/14-tusb.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/15-tusb_fifo.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/16-usbd.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/17-cdc_device.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/18-dcd_stm32_fsdev.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/19-fsdev_common.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/20-stm32g0xx_hal.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/21-stm32g0xx_hal_cortex.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/22-stm32g0xx_hal_pwr.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/23-stm32g0xx_hal_pwr_ex.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/24-stm32g0xx_hal_rcc.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/25-stm32g0xx_hal_rcc_ex.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/26-stm32g0xx_hal_gpio.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/27-stm32g0xx_hal_i2c.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/28-stm32g0xx_hal_i2c_ex.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/29-stm32g0xx_hal_dma.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/30-stm32g0xx_hal_adc.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/31-stm32g0xx_hal_adc_ex.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/32-system_stm32g0xx.o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/33-startup_stm32g0b1xx.o",+      "-T",+      "/home/adom/project/adom-custom-electronic-load/firmware/stm32/stm32g0b1kc.ld",+      "-Wl,--gc-sections,--print-memory-usage",+      "-Wl,-Map=/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.map",+      "-L/home/adom/project/adom-load-firmware-toolchain/root/usr/lib/arm-none-eabi/newlib/thumb/v6-m/nofp",+      "-Wl,--start-group",+      "-lc",+      "-lm",+      "-lnosys",+      "-lgcc",+      "-Wl,--end-group",+      "-o",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.elf"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-objcopy",+      "-O",+      "ihex",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.elf",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.hex"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-objcopy",+      "-O",+      "binary",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.elf",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.bin"+    ],+    [+      "/home/adom/project/adom-load-firmware-toolchain/root/usr/bin/arm-none-eabi-size",+      "/home/adom/project/adom-custom-electronic-load/build/stm32-thermal-bound/adom-load-bringup.elf"+    ]+  ]+}
checkpoints/board32-fields/temperature-margin-tests-v3.logadded+34
@@ -0,0 +1,34 @@+ADC adapter fake-HAL: channel isolation, every-operation failure, saturation and age/wrap passed.+STM32 adapter fake-HAL: pins, endian/address encoding, zero-only DAC, age and sticky faults passed.+Fan adapter fake-HAL: clock refusal, pin/IRQ setup, edge qualification, dual wrap, IRQ-mask restoration, stale edge and delayed poll passed; no hardware timing claim.+load_core: safety policy tests passed (host C build; no MCU/HAL validation)+fan_tach: qualification, RPM, stale input, noise, slow fan, timer wrap and stale-history expiry passed+fan shutdown: 240 synthetic scheduler cases passed; observation <=15ms + poll interval; no hardware timing claim+load_protocol: host safety/framing tests passed; no MCU or USB validation+ADC nominal conversion: divider, ratiometric NTC, invalid reference and saturation tests passed.+{+  "status": "diagnostic-software-checks-pass-not-qualified",+  "sourceSha256": "b8797cf87f0001e2889f04dcaff5682da683560056ce479dae493310064512ea",+  "curveSourceSha256": "66ee0c787b4b689547ec635b045b5e9f0d5d30bc2c672e22ff31d65f11a5caa8",+  "adcCodesChecked": 4096,+  "validAdcCodes": 3751,+  "rejectedAdcCodes": 345,+  "manufacturerTableNodes": 30,+  "maxNodeErrorC": 0.0,+  "monotonicSamples": 10001,+  "invalidCases": 8,+  "diagnosticFirmwareChanged": true,+  "outputLockUnchanged": true,+  "limitations": [+    "No between-node manufacturer error bound",+    "No physical or sensor calibration",+    "No installed thermal tracking or trip qualification"+  ]+}+Measurement cache: conversion age, WAIT expiry, fault latch and clock wrap passed.+Instrument register, readback, signed conversion and transaction-failure tests passed.+..........................................+----------------------------------------------------------------------+Ran 42 tests in 0.117s++OK
checkpoints/board32-temperature-bound/panel-review.jsonadded+38
@@ -0,0 +1,38 @@+{+  "method": "Read-only isolated headless browser against real disconnected controller; no instrument commands",+  "state": {+    "connected": false,+    "mode": "disconnected",+    "state": "UNKNOWN",+    "enabled": null,+    "volts": null,+    "amps": null,+    "case_c": null,+    "case_margin_c": null,+    "case_upper_c": null,+    "temperature_qualified": false,+    "requested_a": 0,+    "applied_a": null,+    "watts": null,+    "rpm": null,+    "rpm_valid": false,+    "power_limit_w": 5,+    "serial": null,+    "error": "No load connected",+    "hardware_verified": false,+    "sensors_valid": false,+    "assembly_qualified": false,+    "updated_at": null,+    "controller": null,+    "version": "0.0.5",+    "telemetry_age_ms": null+  },+  "ui": {+    "bound": "Unknown / unqualified",+    "armDisabled": true,+    "state": "UNKNOWN"+  },+  "errors": [],+  "csvHeader": "timestamp,serial,mode,volts,amps,watts,case_c,case_margin_c,case_upper_c,temperature_qualified,rpm,rpm_valid,state",+  "hardwareQualified": false+}
checkpoints/board32-temperature-bound/panel.pngadded
⋯ 1 unchanged line ⋯
checkpoints/board32-temperature-bound/publication.jsonadded+31
@@ -0,0 +1,31 @@+{+  "base": "46fcaabe109fe4c3381f795ba7c72ceaf739bfd2",+  "scope": "Qualified temperature upper-bound guard; compiled and host-tested only; no production calibration, hardware enable or thermal acceptance",+  "files": {+    "firmware/load_core.h": "f63b19949bd3a0d9f4ce1b28f47512d82b1dcd6016658ea7a626b5eb1c2bc7ca",+    "firmware/load_core.c": "9c97218669b56af3428e8ae02155773123657307761dd293b06fa408168605a6",+    "firmware/load_protocol.c": "5ad98277a7012ad21f0aa91cc22064c39fbc82d5f8756286fb10ecc5e585cc14",+    "firmware/stm32/main.c": "c3845bdb2ff6e15cc2b82b00075b8d815cb23095b8f26aeaedc02af7b5980ad6",+    "tests/test_load_core.c": "1637684a39eadeb991aeddc7d40f7d62bb022a43fde2cd231456b456bd34d9dc",+    "tests/test_load_protocol.c": "5a47f9f12f343f59650e5b2ee4a7b9f9ea23a4259e80f3a60912a79e9afd7095",+    "tests/test_fan_shutdown.c": "3295426e65d2d4b90a64296940ae1dc869c1a3c86fcb19f366826523a7afe5dd",+    "tests/protocol_peer.c": "a033fa1c6b92507260f3a9f7eed1b7a8c4d9676669298c09ddc4b5088efebcd8",+    "demos/fan-safety/trace.c": "d783de89a98d08e40090c08d1ed7af3471f06f617a8b4fc0982e59d494089903",+    "tests/test_transport.py": "a178a0b12a9a2bec2fa40eb3909ebd7012575137c97a8d284db09d469c0710d6",+    "tests/test_controller.py": "1cf712f905c343383dc0b2b2fd467117b720ea89c2dca02382386b5eac0a03bb",+    "control-panel/server.py": "19f93cfaeedbf48969d7340e3934e4c5cb6c49da2da58a37a6939965991598a8",+    "control-panel/transport.py": "97071882b66bdb8327b49ac02a0e14ab04b97cc4fba74bdd16b235fa3497fc80",+    "control-panel/index.html": "f61ca346c25a9140016ce3f3f6a66851326d51d6cc35c74f141adf30c96f54be",+    "control-panel/README.md": "940321496b962987b0b188ae658efd3cc963a381f57dd3f6bab58c6f94856a7c",+    "docs/sensor-trip-budget.md": "68133835d6779f95faa18579426bbc2eed2ad75cb5dec32864e65d1a077386d1",+    "docs/firmware-contract.md": "0f49803fcd3d078f3c53edcbf4a441847ad242300b9a736476e9d6078887122e",+    "docs/status.md": "cf9fa244a39842458a0296a45d084e91881fab6c897acc14fc67bada4590fc13",+    "docs/completion-plan.md": "2a7fb45ed52b7e6dbf4e7cfbbe9443650a2bbc6a69303400a8e58dc8152d7d04",+    "tools/review_temperature_bound.mjs": "0c7a845ad61228b65e47635a1f17728d0ffc2c5aac2c5bd4a27cd5c395e550d7",+    "tools/publish_temperature_bound.py": "391cafafe04c5f08a2dbb7f21682fe0a600bc829f5fbf1a1a6a849a024d65884",+    "checkpoints/board32-temperature-bound/panel.png": "0ded2227cf2d2022315180d6b2ffd99818a2da8b5fe0bbbf0d312ea55af60dd7",+    "checkpoints/board32-temperature-bound/panel-review.json": "1e032a0b36af66c0ebe30701d5f4dc05356b84a9345b43dc32c50656bdef314a",+    "checkpoints/board32-fields/temperature-margin-tests-v3.log": "4385b2fb915ae17b6ac770dc6988ba0e5aa00d91b74bc8f1d253f4a62f671117",+    "build/stm32-thermal-bound/build-manifest.json": "fa4662d7545d09af8a7a38138fb4806a02ff10708d8d1083094ae969938df385"+  }+}
control-panel/README.md+5−2
@@ -1,11 +1,14 @@ # Electronic load control panel -Version 0.0.4 is hardware-only and starts disconnected. Run `python3 control-panel/server.py start --ai-thread YOUR_THREAD --port auto` from the project root. Bind an exact instrument with `--device` and `--serial` only when the assembled hardware is ready. History can restore; connection and enable never restore automatically.+Version 0.0.5 is hardware-only and starts disconnected. Run `python3 control-panel/server.py start --ai-thread YOUR_THREAD --port auto` from the project root. Bind an exact instrument with `--device` and `--serial` only when the assembled hardware is ready. History can restore; connection and enable never restore automatically. -The expandable digital model uses the saved v85 PCB, provisional support geometry and installed fan/harness study. It is not a qualified assembly: the transparent sink envelope omits detailed contact, clamp and airflow geometry. See ../mechanical/installed-fan-study/README.md.+The expandable digital model uses Board32 and the nominal sink, fan, carrier and sensor harness studies. It is not a qualified assembly: fin geometry is inferred, and clamp/contact/airflow tolerances remain unresolved. See ../mechanical/board32-review/README.md.  Fan animation is read-only. Valid hardware RPM drives the named rotor animation at 1:500 visual time scale; measured zero explicitly stops it. Disconnected, invalid, out-of-range or more than 1500 ms old feedback pauses motion and displays unknown. Server age uses the monotonic clock and the browser adds receipt age. No animation control can command hardware. The separate assembly demonstration remains explicitly simulated.  The model loads lazily when expanded. Its canonical Adom 3D Viewer 0.7.1 distribution is unchanged; `twin/vendor-provenance.json` records every bundled asset hash and upstream source. The fan model's MIT license and source assets remain in ../mechanical/installed-fan-study/source/.  Validation: 25 Python tests ran: 23 passed and two were skipped; measured/unknown/zero/stale telemetry adapter tests passed in Node. A real native browser loaded the merged model against the running disconnected server and reported unknown with the rotor paused. This is UI/software evidence, not physical tachometer, load or thermal qualification.+++Temperature protection now uses a qualified upper bound: nominal case estimate plus a positive, finite allowance from trusted assembly calibration. The unchanged actual-case ceiling is 55 °C. Unknown calibration locks enable; older firmware without this telemetry remains monitorable only while OFF. The MCU bring-up adapter explicitly supplies unknown qualification and stays output locked. CSV exports include the estimate, allowance, upper bound and measured fan feedback. Tests use synthetic margins, never production calibration.
control-panel/index.html+3−3
@@ -5,8 +5,8 @@ </style></head><body> <header><strong>Adom / Electronic load</strong><button id="settingsButton" aria-label="Settings" title="Connection and application settings">&#9881;</button></header> <main><div class="intro"><div><h1>Constant-current load</h1><p>Set the load. Monitor the buck converter. Capture every measurement.</p></div><span class="badge" id="link">Disconnected</span></div>-<div class="metrics"><div class="card"><div class="label">DUT voltage</div><div class="value"><span id="volts">--</span> <span class="unit">V</span></div></div><div class="card"><div class="label">Measured current</div><div class="value"><span id="amps">--</span> <span class="unit">A</span></div></div><div class="card"><div class="label">Dissipated power</div><div class="value"><span id="watts">--</span> <span class="unit">W</span></div></div><div class="card"><div class="label">Case temperature</div><div class="value"><span id="case_c">--</span> <span class="unit">°C</span></div></div></div>-<div class="layout"><section class="panel"><h2>Load control</h2><label for="current" class="label">Requested current (A)</label><input id="current" class="number" type="number" min="0" max="1" step="0.01" value="0.10"><input id="slider" aria-label="Requested current" type="range" min="0" max="1" step="0.01" value="0.1"><div class="small">Initial buck profile: 0–1 A, maximum 5 W.</div><div class="actions"><button id="apply" disabled>Apply current</button><button id="arm" class="primary" disabled>Enable load</button><button id="off" class="off" disabled>Load off</button></div><dl class="details"><dt>Device state</dt><dd id="state">UNKNOWN</dd><dt>Applied demand</dt><dd id="demand">-- A</dd><dt>Sensor readings</dt><dd id="sensorStatus">Unavailable</dd><dt>Assembly</dt><dd id="assemblyStatus">Unqualified</dd><dt>Fan speed</dt><dd id="rpm">-- rpm</dd><dt>Instrument</dt><dd id="serial">Not bound</dd><dt>Control link</dt><dd>USB / 3.3 V UART</dd></dl><button id="connect">Connect instrument</button><button id="clear" disabled>Clear fault</button></section>+<div class="metrics"><div class="card"><div class="label">DUT voltage</div><div class="value"><span id="volts">--</span> <span class="unit">V</span></div></div><div class="card"><div class="label">Measured current</div><div class="value"><span id="amps">--</span> <span class="unit">A</span></div></div><div class="card"><div class="label">Dissipated power</div><div class="value"><span id="watts">--</span> <span class="unit">W</span></div></div><div class="card"><div class="label">Case estimate</div><div class="value"><span id="case_c">--</span> <span class="unit">°C</span></div></div></div>+<div class="layout"><section class="panel"><h2>Load control</h2><label for="current" class="label">Requested current (A)</label><input id="current" class="number" type="number" min="0" max="1" step="0.01" value="0.10"><input id="slider" aria-label="Requested current" type="range" min="0" max="1" step="0.01" value="0.1"><div class="small">Initial buck profile: 0–1 A, maximum 5 W.</div><div class="actions"><button id="apply" disabled>Apply current</button><button id="arm" class="primary" disabled>Enable load</button><button id="off" class="off" disabled>Load off</button></div><dl class="details"><dt>Device state</dt><dd id="state">UNKNOWN</dd><dt>Applied demand</dt><dd id="demand">-- A</dd><dt>Sensor readings</dt><dd id="sensorStatus">Unavailable</dd><dt>Case upper bound</dt><dd id="caseBound">Unknown / unqualified</dd><dt>Assembly</dt><dd id="assemblyStatus">Unqualified</dd><dt>Fan speed</dt><dd id="rpm">-- rpm</dd><dt>Instrument</dt><dd id="serial">Not bound</dd><dt>Control link</dt><dd>USB / 3.3 V UART</dd></dl><button id="connect">Connect instrument</button><button id="clear" disabled>Clear fault</button></section> <section class="panel"><h2>Measurement history</h2><div id="empty" class="empty"><strong>Waiting for the physical load</strong><span>Live readings appear after identity and OFF checks pass.<br>No simulated measurements are displayed.</span></div><svg id="chart" role="img" aria-label="Recent measured load power" viewBox="0 0 650 205"><path d="M40 10V175H640 M40 92H640" stroke="#30363d" fill="none"/><text x="4" y="16" fill="#9ba8b9" font-size="12">5 W</text><text x="6" y="178" fill="#9ba8b9" font-size="12">0 W</text><polyline id="trace" stroke="#00b8b1" stroke-width="2" fill="none"/></svg><div class="foot"><span>Measured power from device voltage × current</span><a href="api/export.csv">Export CSV</a></div><div id="events"></div></section></div> <details class="panel" id="twinPanel" style="margin-top:18px"><summary>Digital model · measured fan feedback</summary><p class="small">Geometry is provisional. Disconnected or stale feedback pauses the model and stays unknown.</p><iframe id="twinFrame" title="Electronic load nominal digital model" style="width:100%;height:480px;border:0" loading="lazy"></iframe></details> <div id="notice" role="status">Engineering prototype. MCU port and physical qualification remain pending.</div><div class="foot"><span>Independent hardware shutdown + firmware watchdog are part of the design.</span><span class="warning">5 W bring-up ceiling</span></div></main>@@ -18,7 +18,7 @@ let token='',state={},own=false,busy=false,lastUpdate=0,lastError=null;const cal async function post(path,body){const r=await fetch(path,{method:'POST',headers:{'Content-Type':'application/json','X-Load-Token':token},body:JSON.stringify({aiThread:caller,...body})});const d=await r.json();if(!d.ok)throw Error(d.error||'Command rejected');return d} function notice(s){$('#notice').textContent=s} async function cmd(cmd,args={}){try{const d=await post('api/cmd',{cmd,...args});render(d.state);if(cmd==='arm')own=true;if(cmd==='off')own=false;notice(cmd==='off'?'Load OFF confirmed.':cmd==='arm'?(d.state.enabled?'Load enabled. Keep this control page active.':'Arm accepted; waiting for confirmed output enable.'):'Command accepted: '+cmd)}catch(e){own=false;notice(e.message)}}-function render(s){state=s;for(const k of ['volts','amps','watts','case_c'])$('#'+k).textContent=Number.isFinite(s[k])?s[k].toFixed(k==='case_c'?1:3):'--';$('#link').textContent=s.connected?'Connected / '+s.state:'Disconnected';$('#state').textContent=s.state;$('#sensorStatus').textContent=s.sensors_valid?'Valid':'Unavailable / invalid';$('#assemblyStatus').textContent=s.assembly_qualified?'Qualified':'Unqualified — enable locked';$('#demand').textContent=Number.isFinite(s.applied_a)?s.applied_a.toFixed(3)+' A':'-- A';$('#rpm').textContent=s.rpm_valid&&Number.isFinite(s.rpm)?Math.round(s.rpm)+' rpm':'Unknown / unqualified';$('#serial').textContent=s.serial||'Not bound';for(const id of ['apply','off'])$('#'+id).disabled=!s.connected;$('#arm').disabled=!s.connected||!s.sensors_valid||!s.assembly_qualified||s.state!=='OFF'||!s.rpm_valid||s.rpm<5000||s.rpm>10000;$('#clear').disabled=!s.connected||s.state!=='FAULT';$('#connect').disabled=s.connected;if(!s.connected||s.state==='FAULT'||s.state==='OFF')own=false;if(s.updated_at&&s.updated_at!==lastUpdate&&Number.isFinite(s.watts)){lastUpdate=s.updated_at;history.push(s.watts);if(history.length>180)history.shift();$('#trace').setAttribute('points',history.map((v,i)=>(40+i*600/179)+','+(175-Math.max(0,Math.min(5,v))*33)).join(' '));$('#chart').style.display='block';$('#empty').style.display='none'}if(s.error&&s.error!==lastError)notice(s.error);lastError=s.error}+function render(s){state=s;for(const k of ['volts','amps','watts','case_c'])$('#'+k).textContent=Number.isFinite(s[k])?s[k].toFixed(k==='case_c'?1:3):'--';$('#link').textContent=s.connected?'Connected / '+s.state:'Disconnected';$('#state').textContent=s.state;$('#sensorStatus').textContent=s.sensors_valid?'Valid':'Unavailable / invalid';$('#caseBound').textContent=s.temperature_qualified&&Number.isFinite(s.case_upper_c)?s.case_upper_c.toFixed(1)+' °C (limit 55 °C)':'Unknown / unqualified';$('#assemblyStatus').textContent=s.assembly_qualified?'Qualified':'Unqualified — enable locked';$('#demand').textContent=Number.isFinite(s.applied_a)?s.applied_a.toFixed(3)+' A':'-- A';$('#rpm').textContent=s.rpm_valid&&Number.isFinite(s.rpm)?Math.round(s.rpm)+' rpm':'Unknown / unqualified';$('#serial').textContent=s.serial||'Not bound';for(const id of ['apply','off'])$('#'+id).disabled=!s.connected;$('#arm').disabled=!s.connected||!s.sensors_valid||!s.assembly_qualified||!s.temperature_qualified||!Number.isFinite(s.case_upper_c)||s.case_upper_c>=55||s.state!=='OFF'||!s.rpm_valid||s.rpm<5000||s.rpm>10000;$('#clear').disabled=!s.connected||s.state!=='FAULT';$('#connect').disabled=s.connected;if(!s.connected||s.state==='FAULT'||s.state==='OFF')own=false;if(s.updated_at&&s.updated_at!==lastUpdate&&Number.isFinite(s.watts)){lastUpdate=s.updated_at;history.push(s.watts);if(history.length>180)history.shift();$('#trace').setAttribute('points',history.map((v,i)=>(40+i*600/179)+','+(175-Math.max(0,Math.min(5,v))*33)).join(' '));$('#chart').style.display='block';$('#empty').style.display='none'}if(s.error&&s.error!==lastError)notice(s.error);lastError=s.error} $('#slider').oninput=()=>$('#current').value=Number($('#slider').value).toFixed(2);$('#current').oninput=()=>$('#slider').value=$('#current').value; $('#apply').onclick=()=>cmd('set_current',{amps:Number($('#current').value)});$('#arm').onclick=()=>cmd('arm');$('#off').onclick=()=>cmd('off');$('#clear').onclick=()=>cmd('clear_fault');$('#connect').onclick=()=>cmd('connect'); $('#settingsButton').onclick=async()=>{const s=await(await fetch('settings')).json();$('#ttl').value=s.ttl_hours;$('#settingsText').textContent=`Version ${s.version}. ${s.mode}. Device: ${s.device||'not configured'}.`;$('#settings').showModal()};$('#closeSettings').onclick=()=>$('#settings').close();$('#saveSettings').onclick=async()=>{try{await post('settings',{ttl_hours:Number($('#ttl').value)});notice('Idle shutdown setting saved.');$('#settings').close()}catch(e){notice(e.message)}};
control-panel/server.py+11−4
@@ -22,7 +22,7 @@ from urllib.parse import urlparse from transport import SerialLoad, LinkError  ROOT = Path(__file__).resolve().parent-VERSION = "0.0.4"+VERSION = "0.0.5"   def twin_asset(path):@@ -50,6 +50,7 @@ class Controller:         self.events = []         self.state = dict(connected=False, mode="disconnected", state="UNKNOWN",                           enabled=None, volts=None, amps=None, case_c=None,+                          case_margin_c=None, case_upper_c=None, temperature_qualified=False,                           requested_a=0, applied_a=None, watts=None, rpm=None, rpm_valid=False,                           power_limit_w=5, serial=serial, error="No load connected",                           hardware_verified=False, sensors_valid=False, assembly_qualified=False, updated_at=None)@@ -69,7 +70,8 @@ class Controller:         self.last_read_monotonic = None         self.state.update(connected=False, mode="disconnected", enabled=None,                           state="UNKNOWN", error=str(exc), applied_a=None, sensors_valid=False, assembly_qualified=False,-                          volts=None, amps=None, watts=None, rpm=None, rpm_valid=False, case_c=None)+                          volts=None, amps=None, watts=None, rpm=None, rpm_valid=False, case_c=None,+                          case_margin_c=None, case_upper_c=None, temperature_qualified=False)         self.event("Link lost; load state unknown: " + str(exc))      def read(self):@@ -80,7 +82,9 @@ class Controller:                           watts=d["volts"] * d["amps"] if d["sensors_valid"] else None, updated_at=time.time())         self.rows.append(dict(timestamp=time.time(), serial=self.serial, mode="hardware",                               volts=d["volts"], amps=d["amps"], watts=self.state["watts"],-                              case_c=d["case_c"], rpm=d["rpm"], rpm_valid=d["rpm_valid"], state=d["state"]))+                              case_c=d["case_c"], case_margin_c=d.get("case_margin_c"),+                              case_upper_c=d.get("case_upper_c"), temperature_qualified=d.get("temperature_qualified",False),+                              rpm=d["rpm"], rpm_valid=d["rpm_valid"], state=d["state"]))         self.rows[:] = self.rows[-7200:]      def command(self, cmd, caller, **args):@@ -131,6 +135,9 @@ class Controller:                     self.read()                     if not self.state.get("sensors_valid") or not self.state.get("assembly_qualified"):                         raise ValueError("Valid sensors and qualified assembly are required before enabling the load")+                    upper=self.state.get("case_upper_c")+                    if not self.state.get("temperature_qualified") or type(upper) not in (int,float) or not math.isfinite(upper) or upper>=55:+                        raise ValueError("Qualified temperature bound below 55 C is required before enabling the load")                     if not self.state.get("rpm_valid") or not 5000 <= self.state["rpm"] <= 10000:                         raise ValueError("Qualified fan feedback is required before enabling the load")                     self.link.request("heartbeat")@@ -247,7 +254,7 @@ def main():             if path == "/console": return self.reply(c.events)             if path == "/settings": return self.reply(dict(ttl_hours=a.ttl, profile="5 V / 1 A buck, 5 W ceiling", serial=a.serial, device=a.device, version=VERSION, mode="Hardware only; disconnected until explicitly connected"))             if path == "/api/export.csv":-                out = io.StringIO(); names=["timestamp", "serial", "mode", "volts", "amps", "watts", "case_c", "state"]+                out = io.StringIO(); names=["timestamp", "serial", "mode", "volts", "amps", "watts", "case_c", "case_margin_c", "case_upper_c", "temperature_qualified", "rpm", "rpm_valid", "state"]                 w=csv.DictWriter(out, fieldnames=names);w.writeheader()                 with c.lock: w.writerows(c.rows)                 return self.reply(out.getvalue().encode(), mime="text/csv")
control-panel/transport.py+19−1
@@ -79,6 +79,22 @@ class SerialLoad:                 continue             if type(value) not in (float, int) or not math.isfinite(value):                 raise LinkError("Invalid telemetry: " + key)+        # Older firmware remains monitorable while OFF, but lacks temperature qualification.+        d.setdefault("temperature_qualified", False)+        d.setdefault("case_margin_c", None)+        d.setdefault("case_upper_c", None)+        if type(d["temperature_qualified"]) is not bool:+            raise LinkError("Invalid temperature qualification")+        margin, upper = d["case_margin_c"], d["case_upper_c"]+        if margin is not None and (type(margin) not in (float, int) or not math.isfinite(margin) or margin <= 0):+            raise LinkError("Invalid case-temperature allowance")+        if d["temperature_qualified"] and margin is None:+            raise LinkError("Missing qualified case-temperature allowance")+        if d["temperature_qualified"] and d["sensors_valid"]:+            if type(upper) not in (float, int) or not math.isfinite(upper) or abs(upper - (d["case_c"] + margin)) > 0.0001:+                raise LinkError("Invalid case-temperature upper bound")+        elif upper is not None:+            raise LinkError("Unqualified temperature bound must be unknown")         for key in ("requested_a", "applied_a", "power_limit_w", "sample_age_ms"):             value = d.get(key)             if type(value) not in (float, int) or not math.isfinite(value):@@ -98,9 +114,11 @@ class SerialLoad:             raise LinkError("Invalid device sample age")         if d["sensors_valid"] and d["sample_age_ms"] > 50:             raise LinkError("Device sensor sample is stale")-        if not d["sensors_valid"] or not d["assembly_qualified"]:+        if not d["sensors_valid"] or not d["assembly_qualified"] or not d["temperature_qualified"]:             if d["state"] not in ("OFF", "FAULT") or d["enabled"] or d["dac_code"] != 0 or d["applied_a"] != 0:                 raise LinkError("Unqualified instrument must confirm output OFF")+        if upper is not None and upper >= 55 and (d["state"] in ("ARMED", "RUNNING") or d["enabled"]):+            raise LinkError("Active load exceeds case-temperature upper bound")         if not 0 < d["power_limit_w"] <= 5:             raise LinkError("This bring-up adapter requires a device ceiling of at most 5 W")         return d
demos/fan-safety/trace.c+1−1
@@ -13,7 +13,7 @@ int main(void){   if(spinning){while(next_edge<=t*1000){fan_tach_edge(&f,next_edge);last_edge=next_edge;next_edge+=4286;}}   else next_edge=(t+1)*1000;   float rpm=0;bool valid=fan_tach_read(&f,t*1000,&rpm);-  load_sample s={.now_ms=t,.sample_ms=t,.last_tach_ms=last_edge/1000,.volts=5,.amps=c.enable?c.applied_a:0,.case_c=30,.fan_rpm=rpm,.fan_rpm_valid=valid,.sensors_valid=true,.hw_ok=true,.latch_q=t>100,.assembly_qualified=true};+  load_sample s={.now_ms=t,.sample_ms=t,.last_tach_ms=last_edge/1000,.volts=5,.amps=c.enable?c.applied_a:0,.case_c=30,.case_margin_c=2,.temperature_qualified=true,.fan_rpm=rpm,.fan_rpm_valid=valid,.sensors_valid=true,.hw_ok=true,.latch_q=t>100,.assembly_qualified=true};   load_heartbeat(&c,t);   if(t==100){assert(load_set_current(&c,.75f));assert(load_arm(&c,&s));armed=true;}   load_tick(&c,&s);
docs/completion-plan.md+2
@@ -155,3 +155,5 @@ Hierarchy freshness fix source2784e003197c7d94bceaed2ae55112938ce054e0 directly Board32 has advanced through Models, Test Plan, Placement, Routing, Thermal Vias, Pours, Outline and Current. Current stepThermal fails unchanged limits. Read-only placement command/source d985e4ac858ea5a6ca257ee423e1b4288e9787fe verified104poses across stable native revision with zero placement findings. Via-plan review retains7D1/3shunt vias and the separately documented Q1 case-sink exception; optional fourth shunt via was not added. No PCB geometry changed. Full thermal and physical qualification remain unresolved.129native rawtakes/55reviewed excerpts; all eight new static verification takes rejected for the action film. No recording active. Exact-menu net framing still not visually verified, follow-up adom/kicad-bridge#121; shared bridge preserved.  Board32 continuation: TSP3500 TO-220 pressure data do not fit the retained case-temperature budget with the assumed sink; no substitution made. `docs/thermal-bench-capture.md` and the fail-closed capture checker prepare real thermal/fan-fault measurements. Thirteen synthetic unit tests pass, but the unmeasured acquisition template correctly remains blocked. A reviewed15.9second headless results insert brings the excerpt inventory to56;129native raw takes remain unchanged.++Board32 temperature guard: core/protocol/host/UI now require a trusted positive finite case-temperature allowance and compare the qualified upper bound with the unchanged55°C ceiling. Forty-twoPython and sanitizer C checks pass; ARM build74700BFLASH/24192BRAM remains outputlocked/unflashed. Livepanel0.0.5 is disconnected with unknown qualification and enable unavailable. No production allowance or thermal acceptance claimed.
docs/firmware-contract.md+6
@@ -53,3 +53,9 @@ The diagnostic I2C adapter and conservative measurement cache are compiled and h ## Selected case-sensor diagnostic curve  The output-locked ADC adapter now binds to NTCLE428E3103H301A using the manufacturer table5 nominal curve,−40..105 °C, with no extrapolation. The old NTCLE100 conversion is retained only in historical evidence. Valid numerical diagnostics never set `sensors_valid` or `assembly_qualified`; those remain false. Sensor tolerance, pullup/ADC errors and installed lag still require calibration and physical acceptance. See [software checks](../checkpoints/sensor-firmware-review/checks.json).++## Qualified temperature bounds — Board32++Temperature protection requires trusted `temperature_qualified` and a positive finite `case_margin_c`, in addition to existing assembly, sensor, fan and lease checks. The core trips at `case_c + case_margin_c >= 55` °C. No serial command can set calibration or qualification. Read-only status adds these fields and `case_upper_c`; the upper bound is null when unavailable. Older firmware lacking the additions can be monitored only while confirmed OFF with zero DAC/applied current. The host rejects active telemetry without qualification or at/above the case ceiling.++Control panel 0.0.5 displays the estimate separately from the upper bound and exports both, the allowance, qualification and fan feedback to CSV. The real disconnected panel reports unknown values; no synthetic measurement is injected into it. Forty-two Python tests and the sanitizer-enabled C checks pass, including boundary, unknown-margin, serial-override and fault-latching cases. Fixture margins are synthetic. The output-locked ARM image in `build/stm32-thermal-bound` compiles to 74,700 bytes FLASH and 24,192 bytes RAM; it is unflashed and does not establish hardware behavior. Physical calibration, sensor attachment/lag and cooling qualification remain open.
docs/sensor-trip-budget.md+7−1
@@ -6,7 +6,7 @@ A reproducible static sensitivity check combines that table's resistance toleran  | Indicated cutoff | Earliest sensor temperature | Latest sensor temperature | |---|---:|---:|-| 55 C, current policy | 53.69 C | 56.19 C |+| 55 C, historical raw cutoff | 53.69 C | 56.19 C | | 54 C, sensitivity only | 52.72 C | 55.17 C | | 53 C, sensitivity only | 51.73 C | 54.17 C | @@ -17,3 +17,9 @@ Vishay lists an approximately 2.5-second response **in oil**, permits taped/glue Before enabling load, qualify the exact sensor, attachment and acquisition chain against a reference case-temperature measurement across the intended range. Establish the maximum under-reading including transient lag, then derive an indicated cutoff that preserves the actual-case ceiling. Check the independent comparator separately; its nominal threshold is not a calibrated substitute for the software measurement. The bring-up image remains output locked.  Reproduce with `python3 tools/sensor_trip_budget.py`. [Inputs](../design/sensor-candidate.json) · [Results](../mechanical/sensor-trip-budget.json).++## Implemented qualified upper-bound guard++The policy now compares `case_c + case_margin_c` with the unchanged 55 °C actual-case ceiling. The margin must be positive, finite and supplied by trusted assembly calibration with `temperature_qualified=true`. Unknown qualification prevents arming and faults a running core. Neither field can be set over the serial protocol. The allowance must cover under-reading, attachment gradients and qualified transient lag; the static table above cannot supply that allowance by itself.++No production margin has been selected. Host fixtures use an explicitly synthetic 2 °C allowance to exercise boundaries, not to qualify this assembly. The STM32 diagnostic adapter supplies unknown qualification and remains permanently output locked. Read-only telemetry reports the nominal estimate, margin and qualified upper bound; the panel refuses enable when the bound is unknown or reaches 55 °C.
docs/status.md+2
@@ -6,6 +6,8 @@ The current schematic and PCB match across 104 references and 273 connected pins  The direct-heatsink parameter study predicts 75.58 °C case temperature in still air and 51.13 °C under assumed forced cooling, at 40 °C ambient and 5.5 W Q1 heat. Still air exceeds the unchanged 55 °C case ceiling. Exact interface, mounting preload, installed airflow, sensor margin, finished copper and physical fault tests remain unresolved. The new bench-capture checker prepares measurement review; its unmeasured template intentionally remains blocked. +Control panel 0.0.5 now requires a qualified temperature upper bound before arming. The firmware independently enforces the unchanged 55 °C ceiling, with unknown calibration locked out. Host tests pass; the compiled MCU image remains output locked and unflashed. No actual temperature allowance has been qualified.+ AIFlow installed/registry version remains 0.1.90. This run explicitly uses tested source d985e4ac858ea5a6ca257ee423e1b4288e9787fe, with hierarchical schematic freshness and read-only placement verification. Source publication and installed release are separate. The existing dashboard receives SSE updates in place.  There are 129 native raw takes and 56 reviewed excerpts. The latest 15.9-second isolated-browser insert reviews current and cooling results; it is not CAD-editing or hardware footage. Human editorial approval and the final 4–5 minute narrated film remain pending. No fabrication, order, flashing or YouTube publication has occurred.
firmware/load_core.c+7−1
@@ -15,7 +15,13 @@ static uint32_t checks(const load_core *c,const load_sample *s){     A recent edge alone cannot prove useful speed (or reject noise). */  if(!s->fan_rpm_valid || !isfinite(s->fan_rpm) || s->fan_rpm<5000 || s->fan_rpm>10000 || age(s->now_ms,s->last_tach_ms)>250) f|=F_FAN;  if(age(s->now_ms,c->lease_ms)>1000) f|=F_LINK;- if(s->case_c>=55 || s->case_c< -20) f|=F_THERMAL;+ /* Protect the actual-case ceiling with a reviewed upper bound, not the raw+    nominal conversion. A positive finite margin is required; no zero-initialized+    or serial-supplied calibration may silently authorize operation. */+ bool temperature_bound_valid=s->temperature_qualified && isfinite(s->case_margin_c) && s->case_margin_c>0;+ if(!temperature_bound_valid) f|=F_SENSOR;+ if(s->case_c< -20 || (temperature_bound_valid &&+    (!isfinite(s->case_c+s->case_margin_c) || s->case_c+s->case_margin_c>=55))) f|=F_THERMAL;  if(s->volts<4.5f || s->volts>24 || s->amps< -0.02f || s->amps>3.15f) f|=F_ENVELOPE;  /* Independent measured-power guard. 10% provisional tolerance above the 5 W     command ceiling avoids equating a command clamp with actual power control.
firmware/load_core.h+4
@@ -7,6 +7,10 @@ enum { F_SENSOR=1, F_HARDWARE=2, F_FAN=4, F_LINK=8, F_THERMAL=16, F_ENVELOPE=32 typedef struct {  uint32_t now_ms, sample_ms, last_tach_ms;  float volts, amps, case_c;+ /* Trusted assembly calibration: conservative allowance above nominal case_c,+    including under-reading, attachment gradient and qualified dynamic lag.+    Never supplied by a serial command. Unknown calibration must remain false. */+ float case_margin_c; bool temperature_qualified;  /* Measured over multiple tach periods; valid only after spin-up qualification. */  float fan_rpm; bool fan_rpm_valid;  bool sensors_valid, hw_ok, latch_q, assembly_qualified;
firmware/load_protocol.c+4−3
@@ -98,10 +98,11 @@ static const char *finite_text(float x,char out[32]){ } static size_t reply(load_protocol *p,const request *r,const load_sample *s,const char *error,char *out,size_t cap){  if(cap<LOAD_REPLY_BYTES){stop(p,true);return 0;}- const char *states[]={"OFF","ARMED","RUNNING","FAULT"};char v[32],a[32],t[32],rpm[32];- int n=snprintf(out,cap,"{\"id\":%lu,\"ok\":%s,\"error\":\"%s\",\"protocol\":\"adom.load/1\",\"serial\":\"%s\",\"boot\":\"%s\",\"state\":\"%s\",\"enabled\":%s,\"dac_code\":%u,\"faults\":%lu,\"last_sequence\":%lu,\"volts\":%s,\"amps\":%s,\"case_c\":%s,\"rpm\":%s,\"rpm_valid\":%s,\"requested_a\":%.7g,\"applied_a\":%.7g,\"power_limit_w\":%.7g,\"sample_age_ms\":%lu,\"sensors_valid\":%s,\"assembly_qualified\":%s}\n",+ const char *states[]={"OFF","ARMED","RUNNING","FAULT"};char v[32],a[32],t[32],rpm[32],margin[32],upper[32];+ bool bound=s->temperature_qualified && isfinite(s->case_margin_c) && s->case_margin_c>0 && isfinite(s->case_c);+ int n=snprintf(out,cap,"{\"id\":%lu,\"ok\":%s,\"error\":\"%s\",\"protocol\":\"adom.load/1\",\"serial\":\"%s\",\"boot\":\"%s\",\"state\":\"%s\",\"enabled\":%s,\"dac_code\":%u,\"faults\":%lu,\"last_sequence\":%lu,\"volts\":%s,\"amps\":%s,\"case_c\":%s,\"case_margin_c\":%s,\"case_upper_c\":%s,\"temperature_qualified\":%s,\"rpm\":%s,\"rpm_valid\":%s,\"requested_a\":%.7g,\"applied_a\":%.7g,\"power_limit_w\":%.7g,\"sample_age_ms\":%lu,\"sensors_valid\":%s,\"assembly_qualified\":%s}\n",  (unsigned long)r->id,error?"false":"true",error?error:"",p->serial,p->boot,states[p->core->state],p->core->enable?"true":"false",p->core->dac_code,(unsigned long)p->core->faults,(unsigned long)p->sequence,- finite_text(s->volts,v),finite_text(s->amps,a),finite_text(s->case_c,t),s->fan_rpm_valid&&isfinite(s->fan_rpm)?finite_text(s->fan_rpm,rpm):"null",s->fan_rpm_valid&&isfinite(s->fan_rpm)?"true":"false",(double)p->core->requested_a,(double)p->core->applied_a,(double)p->core->power_limit_w,(unsigned long)(s->now_ms-s->sample_ms),s->sensors_valid?"true":"false",s->assembly_qualified?"true":"false");+ finite_text(s->volts,v),finite_text(s->amps,a),finite_text(s->case_c,t),finite_text(s->case_margin_c,margin),bound?finite_text(s->case_c+s->case_margin_c,upper):"null",s->temperature_qualified?"true":"false",s->fan_rpm_valid&&isfinite(s->fan_rpm)?finite_text(s->fan_rpm,rpm):"null",s->fan_rpm_valid&&isfinite(s->fan_rpm)?"true":"false",(double)p->core->requested_a,(double)p->core->applied_a,(double)p->core->power_limit_w,(unsigned long)(s->now_ms-s->sample_ms),s->sensors_valid?"true":"false",s->assembly_qualified?"true":"false");  if(n<0||(size_t)n>=cap){stop(p,true);return 0;}return (size_t)n; } static const char *dispatch(load_protocol *p,const request *r,const load_sample *s){
firmware/stm32/main.c+2−1
@@ -95,7 +95,8 @@ int main(void) {     if (!online && connected) disconnect();     connected = online;     load_sample sample = {.now_ms = HAL_GetTick(), .volts = NAN, .amps = NAN,-      .case_c = NAN, .fan_rpm = NAN, .assembly_qualified = false,+      .case_c = NAN, .case_margin_c = NAN, .temperature_qualified = false,+      .fan_rpm = NAN, .assembly_qualified = false,       .sensors_valid = false, .hw_ok = false, .latch_q = false};     bool current_ok=load_instrument_input_current(&sample.amps,&sample.sample_ms);     uint32_t adc_stamp=0;
tests/protocol_peer.c+2−2
@@ -10,9 +10,9 @@ int main(void){  load_core c;load_protocol p;load_init(&c,0);  if(!load_protocol_init(&p,&c,"LOAD-HOST-SIM","simboot01",hard_off,&stopped))return 1;  char response[LOAD_REPLY_BYTES];int byte;- load_sample s={.now_ms=0,.sample_ms=0,.last_tach_ms=0,.volts=5,.amps=0,.case_c=25,.fan_rpm=7000,.fan_rpm_valid=true,.sensors_valid=true,.hw_ok=true,.assembly_qualified=false};+ load_sample s={.now_ms=0,.sample_ms=0,.last_tach_ms=0,.volts=5,.amps=0,.case_c=25,.case_margin_c=2,.temperature_qualified=true,.fan_rpm=7000,.fan_rpm_valid=true,.sensors_valid=true,.hw_ok=true,.assembly_qualified=false};  if(getenv("LOAD_PEER_MISSING_SENSORS")){-   s.volts=s.amps=s.case_c=NAN;s.sensors_valid=false;s.now_ms=123456;+   s.volts=s.amps=s.case_c=NAN;s.case_margin_c=NAN;s.temperature_qualified=false;s.sensors_valid=false;s.now_ms=123456;  }  while((byte=getchar())!=EOF){   size_t n=load_protocol_byte(&p,(unsigned char)byte,&s,response,sizeof(response));
tests/test_controller.py+8−2
@@ -16,7 +16,7 @@ class FakeLink:         return {'ok':True}     def status(self):         if self.fail_reads:raise IOError('Cable removed')-        return dict(volts=5, amps=.1 if self.on else 0, case_c=25,+        return dict(volts=5, amps=.1 if self.on else 0, case_c=25, case_margin_c=2, case_upper_c=27, temperature_qualified=True,                     enabled=self.on, dac_code=130 if self.on else 0,                     state='RUNNING' if self.on else 'OFF',requested_a=.1,                     applied_a=.1 if self.on else 0, rpm=7000, rpm_valid=True, power_limit_w=5, sensors_valid=True, assembly_qualified=True)@@ -53,13 +53,19 @@ class ControlTests(unittest.TestCase):         self.link.status=lambda: dict(old(),rpm=None,rpm_valid=False)         with self.assertRaises(ValueError):self.c.command('arm','operator A')         self.assertNotIn('arm',self.link.calls)+    def test_temperature_qualification_is_required_to_arm(self):+        old=self.link.status+        for change in ({'temperature_qualified':False}, {'case_upper_c':None}, {'case_upper_c':55}):+            self.link.status=lambda:dict(old(),**change)+            with self.assertRaisesRegex(ValueError,'temperature bound'):self.c.command('arm','operator A')+        self.assertNotIn('arm',self.link.calls)     def test_invalid_setpoints_do_not_reach_device(self):         for a in [float('nan'),float('inf'),True,-.1,1.1]:             with self.assertRaises(ValueError):self.c.command('set_current','operator A',amps=a)         self.assertEqual(self.link.calls,[])     def test_bringup_can_monitor_but_cannot_arm(self):         old=self.link.status-        self.link.status=lambda: dict(old(), volts=None, amps=None, case_c=None,+        self.link.status=lambda: dict(old(), volts=None, amps=None, case_c=None, case_upper_c=None, temperature_qualified=False,             sensors_valid=False, assembly_qualified=False)         self.c.read()         self.assertTrue(self.c.snapshot()['connected'])
tests/test_fan_shutdown.c+1−1
@@ -14,7 +14,7 @@ static void run(unsigned cadence_ms, unsigned phase_ms, uint32_t origin_ms) {   if(t%cadence_ms!=phase_ms)continue;   float rpm; bool valid=fan_tach_read(&f,origin_ms*1000+t*1000,&rpm);   load_sample s={.now_ms=origin_ms+t,.sample_ms=origin_ms+t,-   .last_tach_ms=origin_ms+last/1000,.volts=5,.amps=0.5f,.case_c=40,+   .last_tach_ms=origin_ms+last/1000,.volts=5,.amps=0.5f,.case_c=40,.case_margin_c=2,.temperature_qualified=true,    .fan_rpm=rpm,.fan_rpm_valid=valid,.sensors_valid=true,.hw_ok=true,    .assembly_qualified=true,.latch_q=armed};   load_heartbeat(&c,s.now_ms);
tests/test_load_core.c+18−1
@@ -2,7 +2,7 @@ #include <assert.h> #include <math.h> #include <stdio.h>-static load_sample good(uint32_t t){return (load_sample){.now_ms=t,.sample_ms=t,.last_tach_ms=t,.fan_rpm=7000,.fan_rpm_valid=true,.volts=5,.amps=0,.case_c=25,.sensors_valid=true,.hw_ok=true,.latch_q=true,.assembly_qualified=true};}+static load_sample good(uint32_t t){return (load_sample){.now_ms=t,.sample_ms=t,.last_tach_ms=t,.fan_rpm=7000,.fan_rpm_valid=true,.volts=5,.amps=0,.case_c=25,.case_margin_c=2,.temperature_qualified=true,.sensors_valid=true,.hw_ok=true,.latch_q=true,.assembly_qualified=true};} /* Existing policy cases begin after the adapter has verified latch reset. */ static bool arm_from_low(load_core *c,load_sample *s){s->latch_q=false;return load_arm(c,s);} int main(void){@@ -57,5 +57,22 @@ int main(void){  assert(c.state==LOAD_FAULT&&(c.faults&F_HARDWARE)&&!c.enable&&!c.dac_code);  load_init(&c,0);s=good(0);c.power_limit_w=NAN;assert(!arm_from_low(&c,&s));  c.power_limit_w=25;assert(!arm_from_low(&c,&s)); /* Unqualified raised ceiling is refused. */+ /* Synthetic 2 C margin exercises the upper-bound policy; not a hardware calibration. */+ const float bad_margin[]={0,-1,NAN,INFINITY};+ for(unsigned i=0;i<sizeof(bad_margin)/sizeof(bad_margin[0]);i++){+  load_init(&c,0);s=good(0);s.case_margin_c=bad_margin[i];assert(!arm_from_low(&c,&s));+  s=good(0);assert(arm_from_low(&c,&s));s=good(10);s.case_margin_c=bad_margin[i];load_tick(&c,&s);+  assert(c.state==LOAD_FAULT&&(c.faults&F_SENSOR)&&!c.enable&&!c.dac_code);+ }+ load_init(&c,0);s=good(0);s.temperature_qualified=false;assert(!arm_from_low(&c,&s));+ s=good(0);s.case_c=53;assert(!arm_from_low(&c,&s)); /* upper bound exactly 55 */+ s=good(0);s.case_c=52.9f;assert(arm_from_low(&c,&s));+ s=good(10);s.case_c=53;load_tick(&c,&s);+ assert(c.state==LOAD_FAULT&&(c.faults&F_THERMAL)&&!c.enable&&!c.dac_code);+ s=good(20);s.case_c=53;s.latch_q=false;assert(!load_clear_fault(&c,&s));+ s.case_c=25;s.temperature_qualified=false;assert(!load_clear_fault(&c,&s));+ s.temperature_qualified=true;assert(load_clear_fault(&c,&s));+ assert(arm_from_low(&c,&s));s=good(30);s.temperature_qualified=false;load_tick(&c,&s);+ assert(c.state==LOAD_FAULT&&(c.faults&F_SENSOR)&&!c.enable&&!c.dac_code);  puts("load_core: safety policy tests passed (host C build; no MCU/HAL validation)"); }
tests/test_load_protocol.c+4−1
@@ -5,7 +5,7 @@ static unsigned stops; static void off(void *context){(*(unsigned *)context)++;} static load_core c;static load_protocol p;static char reply[LOAD_REPLY_BYTES];-static load_sample sample(uint32_t t){return (load_sample){.now_ms=t,.sample_ms=t,.last_tach_ms=t,.fan_rpm=7000,.fan_rpm_valid=true,.volts=5,.case_c=25,.sensors_valid=true,.hw_ok=true,.assembly_qualified=true};}+static load_sample sample(uint32_t t){return (load_sample){.now_ms=t,.sample_ms=t,.last_tach_ms=t,.fan_rpm=7000,.fan_rpm_valid=true,.volts=5,.case_c=25,.case_margin_c=2,.temperature_qualified=true,.sensors_valid=true,.hw_ok=true,.assembly_qualified=true};} static void init(void){load_init(&c,0);assert(load_protocol_init(&p,&c,"LOAD-TEST","boot0001",off,&stops));} static size_t send(const char *q,uint32_t t){load_sample s=sample(t);size_t n=0;for(size_t i=0;q[i];i++)n=load_protocol_byte(&p,(unsigned char)q[i],&s,reply,sizeof(reply));return n;} #define OWNER "0123456789abcdef01234567"@@ -14,6 +14,7 @@ static void ok(void){assert(strstr(reply,"\"ok\":true"));} static void fault(void){assert(c.state==LOAD_FAULT&&!c.enable&&c.dac_code==0);} int main(void){  init();assert(send("{\"id\":1,\"cmd\":\"identify\"}\n",0));ok();+ assert(strstr(reply,"\"case_margin_c\":2,\"case_upper_c\":27,\"temperature_qualified\":true"));  command(2,"claim","",0);ok();command(3,"off","",0);ok();command(4,"status","",0);ok();  command(5,"set_current",",\"amps\":0.5",0);ok();assert(c.requested_a==.5f);  command(6,"arm","",0);ok();assert(c.state==LOAD_ARMED&&!c.enable);@@ -40,6 +41,8 @@ int main(void){  for(size_t n=0;n<strlen(q);n++){init();s=sample(0);for(size_t i=0;i<n;i++)load_protocol_byte(&p,q[i],&s,reply,sizeof(reply));load_protocol_byte(&p,'\n',&s,reply,sizeof(reply));fault();}  /* A serial field can never supply trusted assembly qualification. */  init();command(2,"claim","",0);command(3,"arm",",\"assembly_qualified\":true",0);fault();+ init();command(2,"claim","",0);command(3,"arm",",\"temperature_qualified\":true",0);fault();+ init();command(2,"claim","",0);command(3,"arm",",\"case_margin_c\":0",0);fault();  /* A fresh serial ARM still refuses hardware acknowledgement left high. */  init();command(2,"claim","",0);s=sample(0);s.latch_q=true;  q="{\"id\":3,\"cmd\":\"arm\",\"boot\":\"boot0001\",\"owner\":\"" OWNER "\"}\n";
tests/test_transport.py+16−2
@@ -18,7 +18,7 @@ class FakeWire:         q = self.sent[-1]         d = dict(id=q["id"], ok=True, protocol="adom.load/1", serial="LOAD-TEST",                  boot="boot0001", last_sequence=0, enabled=False, state="OFF", dac_code=0,-                 volts=5, amps=0, case_c=25, requested_a=0, applied_a=0,+                 volts=5, amps=0, case_c=25, case_margin_c=2, case_upper_c=27, temperature_qualified=True, requested_a=0, applied_a=0,                  power_limit_w=5, sample_age_ms=10, rpm=7000, rpm_valid=True, sensors_valid=True, assembly_qualified=True)         return json.dumps(self.change(d)).encode() + b"\n"     def close(self):@@ -67,11 +67,25 @@ class TransportTests(unittest.TestCase):         for change in ({"rpm_valid":None}, {"rpm":7000,"rpm_valid":False}, {"rpm":-1}, {"rpm":10001}):             self.wire.change = lambda d: dict(d, **change)             with self.assertRaises(LinkError): self.load.status()+    def test_temperature_bound_validation(self):+        self.load.connect()+        for change in ({'case_margin_c':0}, {'case_margin_c':-1}, {'case_margin_c':float('nan')},+                       {'case_upper_c':25}, {'case_upper_c':float('inf')}, {'temperature_qualified':1}):+            self.wire.change=lambda d:dict(d,**change)+            with self.assertRaises(LinkError):self.load.status()+    def test_older_firmware_is_off_only(self):+        self.wire.change=lambda d:{k:v for k,v in d.items() if k not in ('case_margin_c','case_upper_c','temperature_qualified')}+        self.assertFalse(self.load.connect()['temperature_qualified'])+        self.wire.change=lambda d:dict({k:v for k,v in d.items() if k not in ('case_margin_c','case_upper_c','temperature_qualified')},state='ARMED')+        with self.assertRaises(LinkError):self.load.status()+    def test_active_overtemperature_bound_is_rejected(self):+        self.wire.change=lambda d:dict(d,case_c=53,case_upper_c=55,state='RUNNING',enabled=True)+        with self.assertRaises(LinkError):self.load.status()     def test_on_readback_refused(self):         self.wire.change = lambda d: dict(d, enabled=True)         with self.assertRaises(LinkError): self.load.connect()     def test_output_locked_bringup_accepts_explicit_missing_sensors(self):-        self.wire.change = lambda d: dict(d, volts=None, amps=None, case_c=None,+        self.wire.change = lambda d: dict(d, volts=None, amps=None, case_c=None, case_upper_c=None, temperature_qualified=False,             sensors_valid=False, assembly_qualified=False, sample_age_ms=123456)         state = self.load.connect()         self.assertEqual(state['state'], 'OFF')
tools/publish_temperature_bound.pyadded+15
@@ -0,0 +1,15 @@+"""Publish the reviewed temperature guard against an explicit unchanged Wiki HEAD."""+from pathlib import Path+import hashlib,json,subprocess+R=Path(__file__).resolve().parents[1]+repo='adom/adom-custom-electronic-load'+expected='46fcaabe109fe4c3381f795ba7c72ceaf739bfd2'+files=['firmware/load_core.h','firmware/load_core.c','firmware/load_protocol.c','firmware/stm32/main.c','tests/test_load_core.c','tests/test_load_protocol.c','tests/test_fan_shutdown.c','tests/protocol_peer.c','demos/fan-safety/trace.c','tests/test_transport.py','tests/test_controller.py','control-panel/server.py','control-panel/transport.py','control-panel/index.html','control-panel/README.md','docs/sensor-trip-budget.md','docs/firmware-contract.md','docs/status.md','docs/completion-plan.md','tools/review_temperature_bound.mjs','tools/publish_temperature_bound.py','checkpoints/board32-temperature-bound/panel.png','checkpoints/board32-temperature-bound/panel-review.json','checkpoints/board32-fields/temperature-margin-tests-v3.log','build/stm32-thermal-bound/build-manifest.json']+head=json.loads(subprocess.check_output(['adom-wiki','repo','log',repo,'--limit','1','--json']))['data']['log'][0]['hash']+assert head==expected,('Concurrent source changed; reconcile before push',head)+out=R/'checkpoints/board32-temperature-bound'+manifest={'base':head,'scope':'Qualified temperature upper-bound guard; compiled and host-tested only; no production calibration, hardware enable or thermal acceptance','files':{f:hashlib.sha256((R/f).read_bytes()).hexdigest() for f in files}}+(out/'publication.json').write_text(json.dumps(manifest,indent=2)+'\n')+files.append('checkpoints/board32-temperature-bound/publication.json')+r=subprocess.run(['adom-wiki','repo','push',repo,'--files',*files,'-m','Require a qualified case-temperature bound in firmware and control panel','--json'],cwd=R,capture_output=True,text=True)+(out/'source-push.json').write_text(r.stdout or r.stderr);print(r.stdout or r.stderr);r.check_returncode()
tools/review_temperature_bound.mjsadded+19
@@ -0,0 +1,19 @@+// Read-only live panel review. No instrument commands or synthetic telemetry.+import fs from 'node:fs';+import assert from 'node:assert/strict';+const {default:puppeteer}=await import('/home/adom/project/adom-video-brand/node_modules/puppeteer-core/lib/esm/puppeteer/puppeteer-core.js');+const out='checkpoints/board32-temperature-bound';fs.mkdirSync(out,{recursive:true});+const b=await puppeteer.launch({executablePath:'/home/adom/.cache/ms-playwright/chromium-1243/chrome-linux64/chrome',headless:true,args:['--no-sandbox','--enable-unsafe-swiftshader']});+try {+ const p=await b.newPage();await p.setViewport({width:1600,height:1000});+ const errors=[];p.on('pageerror',e=>errors.push(e.message));+ await p.goto('http://127.0.0.1:45958/',{waitUntil:'networkidle2'});+ await p.waitForFunction(()=>document.querySelector('#caseBound')?.textContent==='Unknown / unqualified');+ const ui=await p.evaluate(()=>({bound:document.querySelector('#caseBound').textContent,armDisabled:document.querySelector('#arm').disabled,state:document.querySelector('#state').textContent}));+ const s=await(await fetch('http://127.0.0.1:45958/state')).json();+ assert.equal(s.version,'0.0.5');assert.equal(s.connected,false);assert.equal(s.temperature_qualified,false);assert.equal(s.case_upper_c,null);assert.equal(s.enabled,null);assert.equal(ui.armDisabled,true);assert.equal(ui.state,'UNKNOWN');assert.deepEqual(errors,[]);+ const csv=await(await fetch('http://127.0.0.1:45958/api/export.csv')).text();+ for(const name of ['case_c','case_margin_c','case_upper_c','temperature_qualified','rpm','rpm_valid'])assert(csv.split('\r\n')[0].split(',').includes(name));+ await p.screenshot({path:out+'/panel.png'});+ fs.writeFileSync(out+'/panel-review.json',JSON.stringify({method:'Read-only isolated headless browser against real disconnected controller; no instrument commands',state:s,ui,errors,csvHeader:csv.trim(),hardwareQualified:false},null,2)+'\n');+}finally{await b.close();}