← Commit history
aiflow/run/timeline/board32-passive-offset.pngadded
⋯ 1 unchanged line ⋯
docs/passive-sink-screen.md+4
@@ -19,3 +19,7 @@ A fresh all-root STEP audit covers all 91 fitted models on Board32 with no unsup This resolves the earlier centered-envelope collision only in the stated geometric screen. It makes the complete module substantially wider and still needs mating-connector, wire, fan, carrier, source-spreading and workcell clearance checks. No mounting hole or fin geometry was invented and no assembly asset was replaced. The catalog resistance remains conditional at the low temperature rise of this project.  [Reproducible offset study](../tools/screen_board32_passive_offset.py) · [Input-bound results](../checkpoints/board32-temperature-bound/passive-offset-screen.json). This is a separate design alternative, not a thermal pass or accepted replacement.++![Board32 offset alternative, geometric screen only](https://wiki.adom.inc/adom/adom-custom-electronic-load/render/aiflow/run/timeline/board32-passive-offset.png)++The existing fan starts 42 mm above PCB top copper, while this larger sink envelope reaches 58.05 mm. The current fan placement therefore overlaps the conservative sink envelope and cannot be reused as-is. Raising it would require a new carrier/harness study and would change natural-convection obstruction. Neither the nominal 1.5 K/W catalog value nor the fitted-board clearance result qualifies that assembly.
docs/thermal-bench-capture.md+2
@@ -25,3 +25,5 @@ The checker rejects missing evidence, non-finite samples, backwards time, excess A `sample-check-pass` covers only the supplied sampled trace and asserted uncertainty. It cannot independently verify calibration documents, test severity, instrument bandwidth, sensor placement, between-sample peaks or a complete qualification matrix. Ambient and RPM are retained observations, not proof of the specified ambient or installed airflow. A reviewer must establish those conditions and adequate measurement coverage separately. The checker does not update AIFlow gates, change firmware qualification, or approve the assembly.  The checked-in readiness report intentionally says **blocked** because no hardware capture or acquisition uncertainty is available. Thirteen unit tests exercise the checker using temporary synthetic data; those tests are software evidence only.++For the new qualified-temperature guard, retain paired nominal device estimates alongside the independent reference trace on a justified common timebase. The CSV `case_c` above is the independent reference case measurement, not the device's uncalibrated estimate. Preserve device estimates as a separate channel; this checker does not derive a production `case_margin_c`. A reviewed margin must cover the observed under-reading, reference uncertainty, channel alignment, attachment gradients and unobserved/transient behavior across the qualification matrix. The synthetic 2 °C test allowance must never be copied into assembly calibration.
tools/plot_passive_offset.pyadded+22
@@ -0,0 +1,22 @@+from pathlib import Path+import json+import matplotlib;matplotlib.use('Agg')+import matplotlib.pyplot as plt+from matplotlib.patches import Rectangle,Circle+import sys;sys.path.insert(0,str(Path(__file__).resolve().parent));import sexp+R=Path(__file__).resolve().parents[1];a=json.loads((R/'checkpoints/board32-temperature-bound/passive-body-audit.json').read_text());r=json.loads((R/'checkpoints/board32-temperature-bound/passive-offset-screen.json').read_text());b=r['best'][0]['envelopeMm'];bb=r['outlineBoundsMm']+plt.rcParams.update({'text.color':'#e7eef5','axes.labelcolor':'#b7c6d1','xtick.color':'#b7c6d1','ytick.color':'#b7c6d1','font.size':13})+f,ax=plt.subplots(figsize=(16,9),dpi=120,facecolor='#101820');ax.set_facecolor('#101820');f.subplots_adjust(left=.07,right=.71,top=.88,bottom=.11)+ax.add_patch(Rectangle((bb[0],bb[1]),bb[2]-bb[0],bb[3]-bb[1],facecolor='#183e39',edgecolor='#7bd2ad',lw=2))+ax.add_patch(Rectangle((b[0],b[1]),b[3]-b[0],b[4]-b[1],facecolor='#e0ae55',alpha=.16,edgecolor='#e0ae55',lw=3))+for row in a['rows']:+ x,y,z,X,Y,Z=row['boundsMm'];color='#a4b6c5' if row['ref']!='Q1' else '#ffc767';ax.add_patch(Rectangle((x,y),X-x,Y-y,fill=False,edgecolor=color,lw=.7))+ if row['ref'] in ('Q1','J9','J10','J11','J8'):ax.text((x+X)/2,(y+Y)/2,row['ref'],ha='center',va='center',fontsize=9,color='#ffffff')+for fp in sexp.find(sexp.parse((R/'aiflow/run/board-32.kicad_pcb').read_text()),'footprint'):+ props={p[1]:p[2] for p in sexp.find(fp,'property')}+ if props['Reference'].startswith('TP'):+  x,y=map(float,sexp.first(fp,'at')[1:3]);ax.add_patch(Circle((x,y),2,fill=False,edgecolor='#55bdff',lw=1))+ax.add_patch(Rectangle((115.649,44.131),45.974,45.974,fill=False,edgecolor='#24c8bb',lw=2,ls='--'))+ax.set_xlim(92,195);ax.set_ylim(109,14);ax.set_aspect('equal');ax.set_xlabel('Board X (mm)');ax.set_ylabel('Board Y (mm)');ax.grid(alpha=.08);ax.spines[['top','right']].set_visible(False)+f.text(.06,.945,'A passive alternative needs more room',fontsize=27,weight='bold');f.text(.73,.81,'OFFSET ENVELOPE STUDY',fontsize=17,color='#ffc767',weight='bold');f.text(.73,.73,'76.10 × 76.20 × 50.80 mm\nproposed sink envelope',fontsize=16,linespacing=1.6);f.text(.73,.60,'22.10 mm right overhang\n6.00 mm top overhang',fontsize=16,linespacing=1.6);f.text(.73,.45,'91 fitted part bounds checked\n13 probe approaches clear\n0.5 mm body / 2 mm probe margin',fontsize=13,linespacing=1.7);f.text(.73,.30,'Dashed teal: compact sink\nBlue circles: probe access',fontsize=13,linespacing=1.7);f.text(.73,.14,'NOT ADOPTED\nMounting, plugs, fan, workcell\nand thermal performance unqualified.',fontsize=12,color='#ffc767',linespacing=1.6);f.text(.06,.035,'Board32 • actual STEP bounds plus a conservative solid sink envelope • geometry screen only',fontsize=12,color='#9bb0c1')+f.savefig(R/'aiflow/run/timeline/board32-passive-offset.png',facecolor=f.get_facecolor())
tools/review_temperature_clip_wiki.mjsadded+4
@@ -0,0 +1,4 @@+import fs from 'node:fs';+const {default:puppeteer}=await import('/home/adom/project/adom-video-brand/node_modules/puppeteer-core/lib/esm/puppeteer/puppeteer-core.js');+const b=await puppeteer.launch({executablePath:'/home/adom/.cache/ms-playwright/chromium-1243/chrome-linux64/chrome',headless:true,args:['--no-sandbox']});+try{const p=await b.newPage();await p.setViewport({width:1600,height:1000});await p.goto('https://wiki.adom.inc/adom/adom-custom-electronic-load/files/docs/build-clips.md',{waitUntil:'networkidle2'});await p.evaluate(()=>{window.clip=[...document.querySelectorAll('video')].find(v=>v.src.includes('temperature-safety'));if(!clip)throw Error('Missing published clip');clip.scrollIntoView({block:'center'});clip.muted=true;clip.load();});await p.waitForFunction(()=>clip.readyState>=2);await p.evaluate(()=>clip.play());await p.waitForFunction(()=>clip.currentTime>1);const playback=await p.evaluate(()=>{clip.pause();return {duration:clip.duration,width:clip.videoWidth,height:clip.videoHeight,currentTime:clip.currentTime,src:clip.src}});await p.evaluate(()=>clip.scrollIntoView({block:'center'}));await new Promise(r=>setTimeout(r,400));await p.screenshot({path:'videos/temperature-safety/wiki-review.png'});await p.goto('http://127.0.0.1:8798',{waitUntil:'networkidle2'});await p.waitForFunction(()=>document.body.innerText.includes('Temperature uncertainty and latched shutdown'));fs.writeFileSync('videos/temperature-safety/published-review.json',JSON.stringify({method:'Isolated headless browser; no user tab opened',playback,storyboardClipPresent:true,humanApproval:'pending'},null,2)+'\n');}finally{await b.close();}
videos/temperature-safety/published-review.jsonadded+12
@@ -0,0 +1,12 @@+{+  "method": "Isolated headless browser; no user tab opened",+  "playback": {+    "duration": 11.88,+    "width": 1920,+    "height": 1080,+    "currentTime": 1.013504,+    "src": "https://wiki.adom.inc/api/pages/adom/adom-custom-electronic-load/files/videos/temperature-safety/narrated-replay.mp4?v=c7a3cd8c6242.b1"+  },+  "storyboardClipPresent": true,+  "humanApproval": "pending"+}
videos/temperature-safety/wiki-review.pngadded
⋯ 1 unchanged line ⋯