Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `models`, 81.2 min of AI time since the prompt (1214.2 min on the wall clock). This page updates at every step change.+**Running**: step `test-plan`, 83.7 min of AI time since the prompt (1216.8 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -13,8 +13,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 1 | 2026-10-07T17:49:14Z | (open) | 46.0 | 1019 | the first prompt | | 2 | 2026-10-08T11:34:31Z | (open) | 9.9 | 114 | User resumed custom electronic load work and reiterated recording clips for a YouTube buil | | 3 | 2026-10-08T13:38:16Z | (open) | 21.6 | 0 | Continue load design with fan tach and Kelvin-minus probe access; retain two-layer 3rdPart |-| 4 | 2026-10-08T13:59:54Z | (open) | 3.5 | 0 | Continue through remaining library, cooling, routing and recorded build work |-| **all** | | | **81.2** | | |+| 4 | 2026-10-08T13:59:54Z | (open) | 6.1 | 0 | Continue through remaining library, cooling, routing and recorded build work |+| **all** | | | **83.7** | | |  ## Per step @@ -26,10 +26,10 @@ AI time only, the idle cut out. | components | 11.9 | 0.0 | 11.9 | 28 | 1 | 0 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min |-| models | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |-| rules | 62.8 | 0.0 | 62.8 | 14 | 1 | 0 | 0.0 min |-| test-plan | 0.0 | 0.0 | 0.0 | 3 | 0 | 0 | 0.0 min |-| **total** | **81.2** | **0.3** | **80.8** | | | | |+| models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min |+| rules | 64.8 | 0.0 | 64.8 | 14 | 1 | 0 | 0.0 min |+| test-plan | 0.0 | 0.0 | 0.0 | 4 | 1 | 0 | 0.0 min |+| **total** | **83.7** | **0.3** | **83.4** | | | | |  ## Decisions along the way @@ -38,6 +38,8 @@ AI time only, the idle cut out. - 2026-10-07T19:19:08Z Native model setup checked; initial placement next - 2026-10-08T13:45:39Z capture-stop - 2026-10-08T14:03:26Z clip-start:models-1+- 2026-10-08T14:05:30Z capture-stop+- 2026-10-08T14:06:02Z clip-start:test-plan-1  ## Where the board stands @@ -78,12 +80,28 @@ What this step does: Assemble and validate the reviewed symbols, footprints and  What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets. -**Clip: models, still recording (started 2026-10-08T14:03:26Z); it appears here when the step ends.**+**Clip: models, the PCB editor from 2026-10-08T14:03:26Z to 2026-10-08T14:05:30Z. Motion only: 2.1 min of real time, 7 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/models-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the models clip, what the camera saw.**++![nine frames of models](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/models-1-sheet.png)  **Screenshot: the board when models began.**  ![the board when models began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-models-1-start.png) +### test-plan++What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.++**Clip: test-plan, still recording (started 2026-10-08T14:06:02Z); it appears here when the step ends.**++**Screenshot: the board when test-plan began.**++![the board when test-plan began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-test-plan-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.@@ -93,7 +111,7 @@ Percent of each plan limit used, as the provider reports it, at the start of the | claude | 5h | 17 % | 7 % | -10.0 % | | claude | Fable | 0 % | 3 % | 3.0 % | | claude | week | 54 % | 62 % | 8.0 % |-| codex | week | 2 % | 9 % | 7.0 % |+| codex | week | 2 % | 10 % | 8.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*